How to remove the center dashboard on Land Rover Discovery 4 / LR4

Автокөліктер мен көлік құралдары

In this video we look at how to remove the center dash board area on a Land Rover Discovery 4. This helps replace the screen / radio / add reversing camera / replace the stop start switch.

Пікірлер: 12

  • @JohnInSale
    @JohnInSale5 жыл бұрын

    Can you change the centre console / stereo / sat-nav / air-con etc of an LR3 and update it with the LR4 version ?

  • @Ra-is3oy
    @Ra-is3oy6 жыл бұрын

    Hi, thank you for the helpening video. One question, is it necessary remove the lower dash, where goes the shift gear, to get the upper dash removed?? thank you!

  • @davidhowell5945

    @davidhowell5945

    3 жыл бұрын

    Hey guys, any chance of a response regarding this. I’m also interested. Cheers

  • @CristianZamora
    @CristianZamora2 жыл бұрын

    How about a video on how to get to blend actuators

  • @CPG4444Chopper
    @CPG4444Chopper2 жыл бұрын

    Hi. So do I need to follow these steps to replace my faulty air vent. Also do I need to buy the entire piece you removed which includes the air vent or can I simply replace the air vent unit only? Grateful for your help.

  • @L663

    @L663

    2 жыл бұрын

    Hi Paul - you can buy the inner vent bit separate - around £50 + vat - may be cheaper to buy the whole part from ebay Here is the detail www.dropbox.com/s/e4qppkrm85n116f/air%20vents.JPG?dl=0

  • @cutyadam
    @cutyadam4 жыл бұрын

    How do I remove the speedometer on the L462?

  • @daniellyne1
    @daniellyne17 жыл бұрын

    Hiya fellas , absolutely love these videos wondering how possible would it be to put that equipment you've just removed into an LR3

  • @L663

    @L663

    7 жыл бұрын

    Hi - not sure how much is reverse compatible... not a lot i suspect !

  • @willie51900

    @willie51900

    6 жыл бұрын

    Hello Mate, wondering how to replace the centre dashbaord of mine with a newer one with more spec.Any ideas which mechanics can help?

  • @toddlawrence6281
    @toddlawrence62813 жыл бұрын

    Can anyone point me to directions on re-installation of the dash components? I can get the pieces aligned with the top and the tabs, but never the bottom plastic bit. I'm afraid to push it too forcibly.

  • @PietroH53

    @PietroH53

    3 жыл бұрын

    You will have to loosen the gear shift console, slide it back a little to allow the bottom of the vertical piece to go into position.

Келесі