How to Remove & Replace the Steering Wheel on a Toyota 4Runner
Автокөліктер мен көлік құралдары
In this video, I show y'all how to swap (or R&R) the steering wheel on Grim Repo, my 3rd generation Toyota 4Runner that I got from Pull-A-Part Auto Salvage in Corpus Christi, TX. Huge thanks to Pull-A-Part for helping make this video possible, and tolerating me in their yard for 3 days!!
This begins my epic series on all of the things that Grim Repo is going to need to restore him to his former glory! Also, stay tuned for my story of how I found and chose Grim Repo. That series is going to debut in the New Year!
🔧
www.pistonsandpixiedust.com
IG: @pistonsandpixiedust
FB: @pistonsandpixiedust
Пікірлер: 101
I watched this while in a junkyard yesterday to make sure I was on the right track. Thank you, Faye!
Your instructions are way better than even Toyota Time with Timmy
I absolutely love the way you patiently and pleasantly teach in your videos! You don't assume that we know stuff we might not know. That is very helpful. Thanks and keep going!
I love your videos on fixing cars its very well laid out. I have shown my ten year old daughter a few because she needs to see that men are not the only handy people of the human race. Keep it up pls your killing it!
Thanks for being so quick and to the point! Watched the first half of this while at the junkyard and really appreciated not having to scroll through a 25-minute video just to find out where the 3 bolts and two connectors were located to get the wheel off. You rock Faye!
I’m just gone say it she’s fine and knows her vehicles 😍😍
This was super helpful! Just put on my replacement a few hours ago thanks to your video, Faye. Thank you!
@FayeHadley
4 жыл бұрын
yay!!! I'm so glad!
I love her voice and Eyes. Also the fact that she is so passionate about cars! 👍🏽👍🏽 Keep up the good work!
@blayzeespinoza2467
4 жыл бұрын
mirc225 the way she talks >
Wow it's been a long time since I've changed a steering wheel. I haven't changed one with an air bag, so good info for me. I recently bought a steering wheel puller on clearance at Sears. It's similar to this one, but doesn't have a case. I bought it because it looked like a good one and it was so cheap.
Awesome! I just changed mines with your help! Didn't even need a puller! Thank you so much!!
@FayeHadley
2 жыл бұрын
OMG!! So rad! Thank you so much for telling me!!
I love the power tools , something I never used when working on a car . Wicked Awesome
Thanks Faye - always love your vids. I'm working on a 2nd gen so it's a similar procedure. Wish you had a video on the high beams not working on the 2nd gens that can be restored with a quick filing of the combi switch terminals. Have a lovely day and wish you all the best!
@FayeHadley
Жыл бұрын
Oh! Great idea! I'll look out for that one!
Thanks for the info. I'm thinking of replacing my 2000 4Runner Limited's wheel with one from a Celica or RAV4 as I hear they will fit. I like the look of a 3 spoke better, too. Someone else did that swap but I think they had to change the pin configuration on the airbag plug. I'll have to research that more
You make great videos! Thanks for the hard work!!
Just got some new leather for my 3rd gen wheel. Found your video, 10000% easier than digging through the FSM. Let the sewing begin.
@heatmyzer9
2 жыл бұрын
How did your wheel turn out? Looking to recover mine too. Any pro tips? Recommended kit?
This video absolutely helped me.. air bags always give me anxiety 😕
@TheRandomDead
5 жыл бұрын
j gee although, during a head on crash they can save lives.
@gee1081
5 жыл бұрын
@@TheRandomDead true
@elultimo102
3 жыл бұрын
@@TheRandomDead But bags can kill you, if you're too close, which I am. (You can't switch off the driver side bag).
Always entertaining; wish you were here in Florida!
Chicago Pneumatic cordless tool, I am impressed! you do not see them very often in videos. You can go to Amazon then bring up Amazon warehouse in the departments and type in Chicago Pneumatic and it will take you to the tools. These are damaged box tools or tools people returned for one reason or another, very good discounts! Also good educational video I am now a subscriber
Greetings from Poland my lovely.
thanks for the vid. youve got a great manner with cars. calm and considerate. very refreshing :)
@FayeHadley
Жыл бұрын
I appreciate that!
Gorgeous mechanic
Exactly what I need to know. 🥰 Gracias hermosa Faye😘
I went to the junkyard and the 4runner was picked clean except for a very nice in tact leather steering wheel. Score.
Good Job ,,, you made it look like "Even a Caveman could do it "
I have watched some of your other videos by the way amazing an I have come across some that the comments have been turned off I'm sry you had to do that I just dont get some people
They sell the leather rewrap kits on Amazon. Probably about 10 times what you got the steering wheel for but hey you might end up wanting that
Thanks Faye!
Thank you !
Nice job
Thank you Faye. I have to change the one on a tacoma I bought. It's down to an all metal steering wheel just plain gross and dangerous.
Does the airbag fit both steering wheel covers and steering wheels? Wonder if this will work with Tacomas as well
I tried this on my 2000 4Runner.When driving straight down the road the steering wheel was slightly turned to the right.I moved it one spline tooth to the left and now it’s slightly turned to the left.What did I do wrong?
Hi Faye. Loving your channel since I discovered it. Was wondering. Is it the same process with a '91 4runner? Many thanks in advance if you see this and decide to reply. Happy New Year btw! 🙏
@FayeHadley
2 жыл бұрын
That model has a newer style steering wheel and you may have a different electrical connector depending on what wheel you use, but the general process is the same!!
@jorge81
2 жыл бұрын
@@FayeHadley Right on Faye, Thank you. my search for a steering wheel begins! 🤙
very, very nice.
Are there any dangers with the airbag after you unplug the battery?
Just pulled a 4 spoke steering wheel from a third gen at a wrench apart here in Austin to replace my deteriorating 2 spoke… the airbag connector on the two are totally different. Did you have to replace a connector to swap to the two spoke or did yours just happen to have the same connector?
@FayeHadley
3 жыл бұрын
I swapped the internals!!! Great question, not all are like that though!
I have a random question ! My steering wheel clicks when I turn either way, I removed the stalks to rule them out , still happens , can clock springs make that sound ?
Just changed my 96 TACO wheel!! Found one for $16.65 at Pick-Your-Part in Ontario CA. Thanks for the video, I would not of attempted this otherwise!
@jakegerwig8798
4 жыл бұрын
Did you have to use the steering wheel removal kit that she mentioned or just basic tools?
@Nate01693
4 жыл бұрын
@@jakegerwig8798 Yes I did. I'm a tool guy so any chance to add to my arsenal I jump on, but I tried to pull off the used one I got at Pick-Your-Part but couldn't. Maybe because vehicle was in a wreck to end up at Pick-Your-Part? I did use it three times: One to remove from the donor vehicle. Two to remove my bent wheel from my vehicle. Three to remove the new wheel from my vehicle and reinstall because I put it on crooked the first time. Maybe I could of tried prying the donor vehicle wheel off with a big flat head or something but the whole steering column was disconnected from the dash and almost floating loose so when I pulled on the wheel, the whole column moved. Basically no resistance to focus just on the wheel. I didn't want to pry on my vehicle. FYI my airbag connector was a little different than hers. It disconnected differently but still worked.
@jackfitzpatrick257
3 жыл бұрын
how much did it cost? and was the airbag working after?
@Nate01693
3 жыл бұрын
@@jackfitzpatrick257 $16.65, I just bought the wheel and reused my original airbag. I think it works. I haven't crashed into anything to test it out though.
@jackfitzpatrick257
3 жыл бұрын
@@Nate01693 oh sick, did the airbag light stay off too? appreciate it
Have you ever tried replacing it to add a steering wheel controls
What model exactly of torque wrench did you use in this video?
Chulada de mecánica 🥰🥰🥰🥰
What fluid do I use 2019 4runner TRD off road premium atf or power steering fluid
Holy crap I've worked next to you at car fest some years back here in san antonio
I got a questions? Do you have to take out the steering wheel if you want to the ignition switch ( the assembly ) out? My car is not starting and dotn know what to do. It started 5 days ago and now it's not. Brand new battery, starter relay and new starter. The only thing I can think of is the ignition switch. Please help. Thank you. Just sub
I was able to change my steering wheel, but now when I drive down a straight road, my steering wheel is crooked. Do I need an alignment to fix this?
@hanotme.1085
3 жыл бұрын
if you are lazy yes
OMG, you do a better job on your video than 95 percent all guy videos on here I have ever watched. You rock. Can you please do one on removing and replacing front fender on 4Rhunner also? :)
@FayeHadley
4 жыл бұрын
I'll put that one away for a rainy day! I have quite a backlog of requests, but I'll try to get to it!
@mrgreenbudz37
4 жыл бұрын
@@FayeHadley Thanks for the reply. never mind Faye I figured it out, lol A little tricky but I got it done. I replaced the left front fender, fender bracket, both front headlights and turn signals and bumper and valance. Was like a jigsaw puzzle. Thanks and have a great weekend.
Is this the same process for a 1999 Lexus ES 300? Also my car interior is all tan, but I have black floor mats and wanted to put in a black steering wheel. Do you think the black steering wheel will look good in my tan car?
@jameswatt4694
Ай бұрын
I have a black and tan thing going on in my 4Runner, including black steering wheel and black headrests out of a Lexus. Many parts are interchangeable. Oops that was 5 years ago LOL.
@Nikolasto77
Ай бұрын
@@jameswatt4694thx! I ended up replacing the steering wheel and still have the same car 5 years later
I'm trying to go from 2 spoke to 4. Cruise control wiring is different. How did you make yours work? And airbag clip is different but yours plugs right in. Please help me out here.
@FayeHadley
2 жыл бұрын
I modified the clip off camera because of all the haters 😑 dumb, but should have shown it. I just did a resistance (ohms) measure and verify before and after, and I haven't had any fault codes or issues. I depinned one connector and swapped to the new connector. It's a simple process, I'm sure you can do it!
@fotomotoxxiii
2 жыл бұрын
@@FayeHadley oh yea that's simple. I understand electrical well and not scared of this. People freak out because they have no understanding how it works and being airbag it's intimidating. I figured it all out since I looked at the components closer and now it all makes sense. Thank you
Faye, do you know if all Toyota steering wheels are compatible? For example, can I put a Land Cruiser steering wheel in my Camry? Thanks.
@FayeHadley
4 жыл бұрын
Ah, no not all. The biggest issue is the airbags and connectors. Most splines are the same!
@Nikolasto77
4 жыл бұрын
Faye Hadley thank you for replying, Faye! I have a 1999 Lexus es300 with tan interior and the steering wheel is about as bad as your old 4-runner one. I found a beautiful black steering wheel with wood on top and bottom for $80 on EBay. Do you think it will look ok to have a tan center horn and black steering wheel? Thanks. Also, when I brake, the steering wheel shakes. The harder I brake the more violently the steering wheel shakes. My breaks and rotors were replaced two years ago along with bushings in the rack and pinion. I recently replaced sway bar links. The steering wheel does have a lot of play in it (I have to turn it a lot more to make the car go where I want it to). I have 280,000 miles on the car. What parts do I need to check to diagnose this problem? Apparently, steering wheel shaking is one of the hardest things to diagnose. Thank you so much and sorry for the long message.!
Are all toyota air bag connectors the same at least for that era? Trying to swap my T100 wheel for a Tundra with media controls.
@FayeHadley
3 жыл бұрын
They are NOT. I have made it work but for liability I probably shouldn't say anything about how I've done it 😂
@MrTacoMan247
3 жыл бұрын
@@FayeHadley theoretically speaking I would just cut off the connectors and soiler on to retrofit. I feel like they are all the same voltage and there should only be 2 wires on all. Thank you
So the 96-97 2-spoke steering wheels will work on a 98+ that had a 4 spoke?
@FayeHadley
3 жыл бұрын
They can, bit you'll need to modify the airbag connector harness, or swap airbag internals!
@CLock-hr4cd
3 жыл бұрын
@@FayeHadley how did you modify the connector harness? I put a 98 Corolla wheel on my 98 4runner and it fits perfectly except for the airbag connector!
Thankyouu
how much did this cost? and did the airbag work after?
@FayeHadley
3 жыл бұрын
Well I have not been in an accident but I don't have any airbag codes, And they paid I think either 10 or $20 for this from the junkyard! Pull-A-Part rocks!!!
👍👍👍👍
Badass lady!
why did you disconnect the batt.?
@lavoueysizzle434
4 жыл бұрын
John Nellis So the airbag doesn’t have power. Just a safety precaution that everyone should practice when working anything electric on a vehicle. You’d hate to have your airbag deploy while holding something in front of your face.
Sorry you keep having to turn off comments. I started out learning about cars from the Idiot book on VWs. I so loved working on air cooled VWs. Later got an air cooled BMW /7 motorcycle and the valve adjustment was identical to the VW. So easy.
Faye, do you ever get angry?
😁
Great video thank you, something about a hot girl mechanic.
You better not ever eat those chickens
@FayeHadley
4 жыл бұрын
Haha never!!
Did you know that Faye is a Harvard graduate with a degree in psychiatry
Steering wheel cover is disgusting. 😳
werd.