First wanna say thank you to Ryan and team for an excellent video. I’m only here because I stopped to see if I could help a guy on an older super/wide glide who was broke down in a parking lot today. His final drive belt was broken in half. Nothing I could help him with. I just wanted to see how much of a bastard job this was. Certainly not a side of the road job. Confirms my feeling that Harley built it’s best bike starting in 1952, the Model K. It was then modified in 1957 and renamed the Sportster. 2022 is the 70th anniversary of this bike, still in continuous production, 71 YEARS ! The first Harley with full suspension. The first Harley with foot shifting. And, you can replace the final drive belt on the side of the road, with minimal tools, if you are ever forced to ( my father kept a spare belt with him on his many cross-country road trips, just in case, so he wouldn’t get stranded on his Sportster, which he never had a breakdown on, btw ). I personally have ridden over 800 miles in one day ( 1700 miles in 3 days total ) on a Sportster with no issues to bike or rider. Model K / Sportster, greatest Harley of all time, that’s why it is still with us today.

This video is going to help me tremendously! I just got my first 09’ fxdl and finished building it but the old belt snapped down the road. With this video I can put a new belt in. Thanks!

@RyanUrlacher

Жыл бұрын

U betcha!!

$1500 job here in Michigan, thanks for the vid Ryan!

Ryan great video. A couple points. I purchased the tool instead of using the wood. It only cost $39 I bought it plus the tool to hold the cam gear just to have in my tool box if I ever need them. I know that this is anal but when changing my primary oil my clutch cover bolts got rounded off (maybe my fault for not having a good Torx or HD tighten the hell out of them when they did my last service. I replaced the bolts and kept the good ones for shares. I tried like hell to remove the bad bolt, I finally removed the outer primary to lay flat and the sucker came right out. Oh don't ask about the oil filter, they must have used an impact on it. Sorry to go on but I've started doing my own service. I was just lazy plus when I bought my 12 Limited I got the 3 year service package I didn't pay for squat for service or parts. My dealer Or Harley don't offer that anymore. TTFN

I want to start by saying that this was a great video! Although I am a bit confused as to why you couldn't just put a 1/4" extension on your Allen socket to remove the starter bolt(s). Welding all the crap together seems unnecessary, however if it works it works. Thanks for the video, definitely helpful!

@marcusholden9165

2 жыл бұрын

If you look at the spacing of the bolt against the casing there is very little room. Maybe with a slightly longer alan head you might be able to do it.

Hey Rayn, thanks for this great video brother! I'm replacing the belt on my 03' Road King. The tip using the wood for the gear jam works perfect. Hope all is well with you and your family.

@kaniwetini2784

2 жыл бұрын

Hey buddy I’m looking at doing mine for my 03 roadking was just hoping you still have knowledge of all the torque specs as I can’t find them anywhere, cheers

I hope you switched to forward controls during this and didn't have to take it all the way back apart to feed the shift rod through.. lol.

@steventwiddy3402

2 жыл бұрын

Yeah I think they had to pull that all back down again !

@sonnyschaak8996

2 жыл бұрын

Ya they missed that lol

Great video coupled with the manual concurred a primary belt change on a fatboy 2012. The additions though to this video, exhaust system removed, swing arm bolt partially removed, managed not to remove oil tank through tooling mods.

Awesome video. Thank you for doing this. Great clarity with one person narrating while someone does the work.

Wow an Awesome in depth video. Very informative. I just got an 1985 FXR and did not notice it needs a belt. The shop said about $600. I am on a real low budget. This video sure helped me out. Thank you so much.

@RyanUrlacher

6 жыл бұрын

You are most welcome Randy! Glad to help. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Great video!! I'm new to the Harley family after years of Metric bikes. Your videos have taught me a lot on how to do maintenance on my bike which I appreciate since I hate anyone touching my Harley :)

@RyanUrlacher

8 жыл бұрын

Awesome Chad and we love hearing stuff like this. Puts a smile on my face knowing that the hard work we put into these videos to help bikers is really working out there. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@karmsenrab8587

3 жыл бұрын

I ben w/h-d fam for 50yrs, they're just steel&alum w/chrome&paint on em. Give me a ratbike anyday!

On a 1995 (and other?) Softail Fat Boy you need to remove the oval chain tensioner cover. Two of the bolts go through into the inner primary cover so the outer primary cover will not come off without removing those.

Thank you. Just had to take off the bdl belt drive on my bike. Your vid cracked it for me.

@RyanUrlacher

7 жыл бұрын

Allen, we love to hear that! We love to help other bikers out. Your appreciation is what motivates us to keep pumping out videos. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

The best teacher ever..... Luca , from Italy!!

@RyanUrlacher

6 жыл бұрын

Luca, thank you so much! I appreciate that. Hope all is well in Italy.

amazing video!!! can you make one showing how to convert to chain drive? I'll be doing this to my fxdls this winter.

@RyanUrlacher

7 жыл бұрын

Always working on new videos for sure. Just shot 3 videos and did a 16 hour day. No time line on that video though. Really glad this one helped you Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@dalebenson1230

3 жыл бұрын

@@RyanUrlacher o

Excellent video. Very helpful to this new guy who has to replace a drive belt. I am looking at your other links now for more info.

@RyanUrlacher

5 жыл бұрын

Right on! Glad we could help. We appreciate the positive feedback. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Doing this now, thank you so much for putting out this video. You saved me alot of time:)

What a job . Don,t break a belt out in the sticks . Crazy amount of work . I just watched a guy replacing the belt on an electric bike . It took him 30 minutes .

@shavedape

Жыл бұрын

Exactly - I've seen it take a guy 19 hours doing it the first time with his service manual. He was taking his time obviously and borrowing tools throughout which slowed him down but the amount of steps to simply replace a belt is ridiculous. Especially removing the primary drive completely off the bike and the swingarm WTF. So stupid. But great video explaining the ridiculousness involved to replace something that should take 30 minutes if their engineers weren't morons.

Interesting, I did not know Harley Davidson still used imperial size bolts and screws decades after the US auto industry went metric. The video shows everything but the actual removal and replacement of the final drive belt.

saw same thing no shifter shaft on reassembly. take it all apart again. still like all videos thanks

@RyanUrlacher

4 жыл бұрын

That's because we moved and installed forward controls. No mid shifter anymore. Did it at the same time.

Hey guys this a great video. Nice step by step. Only one thing I would add, at the 26:15 min mark while putting the clutch inspection plate back on you say to torque 74-108, but you did not specify that now you are using inch pounds and not foot pounds. Mechanics will pick it up, but it could be confusing to some. Please do not misunderstand, it is a great video, very informative.

@chrisl5036

3 жыл бұрын

Lol also didn't show installing the clutch rod.

@fishwithlungs

2 жыл бұрын

Thanks for the video, very good visual aid along the FSM. Managed to loosen the starter bolts on 2014 Softail without removing oil tank. Tip: remove battery, then the plastic tray under it, and you can feel the rear starter bolt just under the metal tab. Get 1/4 allen with swivel in through the battery compartment and feed long 1/4 extension from intake side to join in there. Took me 5 minutes elaborating and 1 minute doing, definitelly better than removing the oil tank.

A text message on the video said on the Softail you have to remove the oil tank. I suppose that's to get to the starter bolts. But on my 95 Fat Boy I removed the inner fender cover which let me get to the rear starter bolt. Tedious, 1/4 turn on an allen wrench at a time but I got it. Then used a straight hex with a 1/4 socket and extension to get the front one.

Great video, very easy to follow for new Harley owners !

Good luck on getting the gear selector rod back in.

I have a '90 softail and it looks like the swingarm has to come off, maybe other stuff. Do you have a video on doing a belt on that model?

Great video buddy but quick question what’s the parts should I replace while I’m in there?

What about the belt going around the swing arm?

Why did you take the clutch inspection, or derby cover off, if you are removing the inner, and outer primary covers? After watching several of your videos related to inner, and outer primary cover removal. I left the derby cover on, drained the oil out then removed the outer primary cover in one piece.

Thank you for let us see how to remove the primary transmission. We would have appreciated that you really show us ( title of this vidéo ) how to put new belt. Do I need to disasemble the swing arm to insert the belt on the front pulley? Not that clear at all, I Hope and expect an additionnal help from you. Thanks in advance.

Great, informative video. What if it was a hydraulic clutch?

You can get to the starter bolts on a softail with a 3/8” drive extension, you should disconnect the battery unless you have plastidipped tools or like frying the finish off of your chrome oil tank, or lines.

@RyanUrlacher

6 жыл бұрын

Thanks for watching!

@faroncockerham3586

5 жыл бұрын

Had to take the oil tank off mine. But mine was an 88 I don't think it could be worse to work on.

Back in ‘84 I used a piece of wood to jam between the motor sprocket and clutch housing. I didn’t notice a small splinter of wood and of course it ended up plugging my oil return to the motor. I was on a run and checked my oil and there was none. I’m surprised I didn’t burn up that motor but it kept on running...the good/bad old days...thanks for the great videos amigo 😎

@RyanUrlacher

3 жыл бұрын

TY!!

thank God I converted my belt over to chain when I bought my flhtcu. Using a belt was the dumbest thing Harley did.

Brilliant……..going to have a go stripping the engine this weekend, I’ve got a few screwdrivers and pliers knocking around, do i need to let the tyres down first ??

Good argument for a Sportster.

where is the shift shaft ? I did not see it sticking thru on reassembly

@bearded_firemedic

4 жыл бұрын

Mark Miller They showed in another video that this particular bike got a forward control upgrade at the same time.

@steveross2797

3 жыл бұрын

Just saw that too. Should have been explained.

@EARDRUMASSASSIN

3 жыл бұрын

@@bearded_firemedic since when is fowards an upgrade. Mid controls is where it’s at.

@bearded_firemedic

3 жыл бұрын

@@EARDRUMASSASSIN , not going to argue with you there, I prefer my mid controls as well! I should have put the word "upgrade" in quotes, as I referenced it directly from the preceding video where they did the conversion..

Hello! I believe that on the video there is something important that has been forgotten. Where did the gearshift shaft that crosses the primary case???

Was there anything special about reinstalling the shifter rod? I didn't see it reinstalled in the video. Thanks

My 2002 FLHTPI has a cam type of belt adjustment at the axle nut ? Unlike my 1993 FLHT , which had one similiar to the one you showed . Any tips on adjusting the " Cam " type belt adjustment on the 2002 FLHTPI ? Great Video , Thanks for Posting !

What about the swing arm on a Softail how do you get the belt around it

Thanks for the video, sincerely a 1%er outlaw biker.

@RyanUrlacher

4 жыл бұрын

No problem 👍

ever heard of any Harley models that require swing arm to be removed to replace belt?

Is it necessary to replace the sprockets/pulleys front and rear when replacing old with new belt?

Question, were you able to reinstall the shift shaft through the inner and outer primary the way it was put together or do you have to totally disassemble it again to re-install the shift shaft?

Excellent video, this helped me out loads

That’s why you do a chain conversion!

Awesome vid ! Thankyou ! Question I’m doin a trike installation on a 1997 Dyna wide glide “FXD” And I need to remove the rear swing arm. ? Do I need to remove the primary covers to do this ? Thankyou in advance

Grazie per il.fantastoco video, siete bravissimi , vorrei sapere le bussole che avete usato ,per togliere al primaria ,ilmnumero della torx e quella in pollici. Se fosse possibile anche il serraggio con la dinamometrica in NM Vi seguo dall'Italia, un saluto caloroso, grazie.

I have to compliment you on this video like everyone else, it is very informative and very helpful to actually see it performed rather than read how to do it. You mention torquing the 5 primary cover bolts to 84-105 that would have to be in inch pounds. Can the shifter lever shaft be installed through the primary covers after they are assembled or should it be installed at the same time as the starter? The video showed removing it the same time the starter was removed but never mentioned it or showed it being installed during reassembly, just curious if it matters.

@nathangibson6391

2 жыл бұрын

pretty sure that was by mistake. it has to be installed before cover

You the man. I just bought a new used 11 Road King Classic. How much did you just save?

I have a 3" BDL belt drive with side support am having a very hard time removing the side support, used a pulley to get it off.The support came off but the bearing on the motor didn't , i tried a bearing puller an tighten until i was scared to tighten anymore because it shouldn't need that much force, or am i wrong? Help

I’m guessing you’re putting on forward controls or that’s a different dyna. The inner primary doesn’t have the shift shaft going through.

@RyanUrlacher

3 жыл бұрын

Yes, we put on forward controls. Ride safe & Ride Often! Check out this KZread Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

Have one of these for a 2005 sporster custom.

Pardon my ignorance but wouldn't the belt still be around the swingarm.

Great video thanks for posting

Armand 0ur81goon; On a '95 fxsts Bad Boy Springer, to replace the outter primery seal , do i have remove trhe inner primery ?

Thank you

Great video thank you for posting..... but are you not going to acknowledge the shifter not being reinstalled.... my heart wouldve droppped.

@Froggetatts

5 жыл бұрын

Yes I agree I didn't see them reinstall the shifter

Thankyou for the video.

@RyanUrlacher

Жыл бұрын

My pleasure!

Great video good job

U have every thing back together when ya gonna put the shift lever through the whole

@RyanUrlacher

3 жыл бұрын

Actually, during this video and project we installed forward controls to include re-locating the shifter. Glad you liked the video

Great job

awesome video man, I owe you a beer!

@RyanUrlacher

7 жыл бұрын

You are most welcome!!! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide?Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App www.lawabidingbiker.com/podcastJoin our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Buy a sporster easy belt change

The swing ar. I havnt ill try sorry never done one

Looking for info on changing the final drive belt on a 2016 Road Glide.

@RyanUrlacher

7 жыл бұрын

We don't have one yet. Sorry.

@scottgorman7166

5 жыл бұрын

Same process except (a real pain in the ass) is the swing arm has to be removed on one side to slip the belt out. Ryan missed a big part for a bagger. I have a Street Glide and have to do this process.

After removing the primary cases and the belt how hard would it be to remove the transmission. My transmission mount is cracked

What would you do with a hydraulic clutch?

How many hrs would be reasonable on a work order?

I wish I had know how much it was going to cost, needed new belt and pulley and after watching video maybe would have done it myself. 2,100.00 ugh. Picked up a rock or something that put a hole in belt and broke trim piece on pulley

The Torx bolts may take a T27 (1/4") instead of a T25. Just an FYI.

For softail you will need to remove the swing arm bolt and drive side swim arm spacer

@RyanUrlacher

8 жыл бұрын

Good info and thanks for sharing with the community here.

@scottgorman7166

5 жыл бұрын

Same process on a Street Glide and its a bitch to slide the belt past. Warm it in the sun helps

Is this the same procedure for a road glide 2012

Thankyou

Did you have to take the cover back off to put the shift lever back on I notice I didn't see it at the Verriand

@RyanUrlacher

7 жыл бұрын

No, Sorry for the confusion there. We put a forward control kit on. We moved the mid controls to forward controls. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@keithwaite5026

7 жыл бұрын

I also noticed that. Great easy to follow video. Thanks.

Great video, easy to follow, thank you so much.

@RyanUrlacher

7 жыл бұрын

Thank you and you are most welcome. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

THANK YOU, BEEN QUITE A WHILE

Dude glazed over placing shifter back through primary cover. But that was fun to have to tear it all back down to put it back in place

@RyanUrlacher

5 жыл бұрын

We didn't. We put a forward control kit on at the same time. It moves the shifter forward. Multiple videos were filmed. It's all good. Nothing is forgotten. You can see other videos here www.lawabidingbiker.com/buyvideos

Did you missed the shifter while replacing the inner Primary Cover? Didn't you?

@kenchasser4376

4 жыл бұрын

It’s on the floor at 21:41 on his lower left side....

Mmmhhh forgotten to re-mount the gear-speed lever and pedal. I don't know if it needs new o-ring to avoid oil leakage and dirt shoe.

@Doug_Morgan

4 жыл бұрын

In the older comments he mentions they put a forwards conversion on at the same time. The hole in the cover is plugged with a seal.

@10:20 does it matter if the belt isn’t center on the sprocket?

Great video, my only comment/question is about the loctite.. blue is made to be serviceable and red is intended for permanent applications. Is blue what you meant to say?

@RyanUrlacher

7 жыл бұрын

Neither is truly permanent. Use which the one you prefer. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Awesome video. Thank you

Is this any different than replacing the triumph thunderbird final belt drive ?

Really appreciate your well thought out detailed videos. THANK YOU

@RyanUrlacher

5 жыл бұрын

Thank you. I appreciate you taking the time to leave positive feedback. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Man I really don't want to do all that work on my bike. Great video though even though it's a bit old now, thank you

Anytime you need to go into primary disconnect Battree ground

Great man

Very good

First great video. 2nd have you done a video of removing the stator. Mine is leaking and plan on tackling it in the near future. I also enjoy the podcast, gives me something to listen while at work.

@RyanUrlacher

8 жыл бұрын

Thanks so much for taking the time to comment. We are always stoked that bikers out there appreciate our videos. A ton of time and hard work go into them. We love helping bikers save money and wrench on their own bike. We have a ton of videos in the works at all times. I can't tell you when a removal of the stator video would be out. Make sure your subscribed to this channel. Get on the free email list too: www.lawabidingbiker.com/emailclub Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@SteveTheGasMan

8 жыл бұрын

+Ryan Urlacher looking forward to them

So much work...

I have a Sportster with a swingarm that has been extended 3". I would prefer not to convert to a chain. Can you recomend where I can buy extended length primamry drive belts?

@RyanUrlacher

6 жыл бұрын

Sorry Jeff, we don't have any experience with that. We's hate to send you astray. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

I see you left that compensator piece on it what is it take to take that compensator piece off and switch it out if you want to go with something like cycle-rama or dark horse Compensator

when did you go back and put the shifter rod through the primary? DAAAAA!

Shift shaft?

14:05 Retaining ring orientation? and is it OK to reuse inner primary sealing fasteners?

Will this be similar on a 09 fxcwc

Having trouble with a 05 Road King clutch, when you take it out and look at it, what exactly are you looking for and what should you see or not see

First thing I do on a post Shovel Harley is convert it to chain drive. Belts suck.

Great video! 'Blue' loctite.

@RyanUrlacher

7 жыл бұрын

Glad you liked the video and thanks for watching. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.