Quick and straight to the point! I like it

Wow man great video can’t believe you don’t have more subs. Ian now one

I'm going to build a platform with a ramp and then put my engine hoist onto it for height to remove it from my boat on a trailer, about how high you think I would need. I'm thinking at least a 2 foot high platform. I'm using heavy duty wooden pallets, cinder blocks and plywood for the platform and ramp.

Great video keep em comming

You always make it look so easy!

@ZachsGarage1

3 жыл бұрын

Thanks! I try to edit it to make it seem that way ;) lol

Nice video. You covered it.

Thanks Zach, I have a 2007 Glastron MX175, with your setup in her. Got to pull the 3.0 and rebuild or replace it.

@TylerRumfola

3 жыл бұрын

Timmy Colson why? Mines been running funky got the carb rebuilt and gas filter replaced and it’s running insanely rich. Have compression on all cylinders

@isaiahkramer3610

3 жыл бұрын

@@TylerRumfola Have you adjusted your carb?

Someone told me I should check out your channel. Very nice. It's good to see the younger generations continuing the boating passion and helping others.

@ZachsGarage1

3 жыл бұрын

It is an honor to know you're watching! Your sea ray restoration inspired me to not only rebuild my boat but also to make this KZread channel and share the process with others! Thank you! You are the real MVP

@ZachsGarage1

3 жыл бұрын

You also inspired Jared at MadPropsMakes, we are your disciples! lol He even featured you in one of his videos: kzread.info/dash/bejne/eKiZp82xncjUYJs.html

@FriscoBoatersGarage

3 жыл бұрын

@@ZachsGarage1 LOL... Thank you for your kind words. I just think it's awesome to see yall marching along with new projects.

After removing and then reinstalling the engine, should you do an oil change since small particles might have become unlarged?

Dude thank you so much for this video I have a spunbearing and had to pull my engine monster 3.7L 4cyl Mercruiser 470 - I watched your video and pulled mine in 2 1/2 hours (my wiring was a lot different and I documented a lot of it) lol

@Grant3758

Ай бұрын

U really pulled it in 2.5 hrs? Blew my 4.3 today and deciding to rebuild or just get rid of it

@hunterm.172

Ай бұрын

@@Grant3758 Yes it was easy-my recommendation it label all your wires and put your bolt in bags and label them-wouldnt hurt to take videos as you unhook/unbolt things

Hi there, I plan on removing the engine from my Bayliner 175 year 2006. I haven’t started the process, but I was wondering if you could tell me if the back of the your MerCruiser engine was bolted to the cradle/frame which connects to the transom/alpha leg or - is the back of the engine bolted to the bottom? Thanks

Wanting to convert my boat from inboard to outboard honestly just going to cut what ever is in the way. All I want is to be able to drive to the middle of the lake and chill. Also my trailer is to small so need to free up some weight. All in all you help me not just throw the whole boat away and just use my canoe.

Why did you have to remove the exhaust manifold?

If you let the air out of the tires, that would make hoisting the engine over the side of the boat infinity simpler.

Man! I understand my engine now. Thanks!! Keep up the good work, love your vids. S'cribed.

@ZachsGarage1

3 жыл бұрын

Great to hear! Glad the the videos are helpful 🤠 thanks for subscribing!

@jimccc9467

3 жыл бұрын

Why did you have to remove the exhaust manifold?

What about a mercruiser MPI V8? When I open my engine cover it is like looking at the engine on a 747. I don't know where one wire or hose begins and the other one ends.

@ZachsGarage1

3 жыл бұрын

I can't say for sure sure as I don't have one. But I would try to just follow one wire at a time

1. Those crankshaft bearings you put oil on the outside between the block and the bearings rotated.? 2. Oil gallery blocked ? 3. Oil pan leak? 4. Bad lifter? Hummm. The anticipation!! Lol.

I bought a block with .3 oversize pistons. As it had to be bored out. Question is, can I use a standard head gasket? Cheers

@ZachsGarage1

3 жыл бұрын

Yes, you can. I did on mine with the same overbore and have not had any issues

@markfitzy.86

3 жыл бұрын

@@ZachsGarage1 thanks for your help. And thanks for these videos

I'm sure there is a story coming on why the engine is coming out of the boat again, but what happened? We are using your channel as a template for our 1993 VIP Valiant rebuild, except for that we are having the block professionally refurbished.

@ZachsGarage1

3 жыл бұрын

A story indeed! Will be revealed in the next video!

Nice! But I think you forgot to remove the main harness connector 😲

@ZachsGarage1

2 жыл бұрын

I never forget! 😎

@Jstars200

2 жыл бұрын

@@ZachsGarage1 Sorry saw now! Really appreciate your videos! Awesome work

Ut Oh!! What happen?

@ZachsGarage1

3 жыл бұрын

You'll find out in the next video ;)