You don’t need to do all this work. I pulled my chrome front bumper off just by removing the 3 bolts on either side as shown in last part of video. After doing this pull down and out with the help of a friend and the bumper will come off very easily. You’re welcome 💯

@azm690

3 жыл бұрын

So you are saying we don’t have to take headlights or front grille off ?

@jo47762

3 жыл бұрын

@@azm690 That’s correct 👍🏼

@scstinger5

3 жыл бұрын

I replaced my bumper the same as you. Not sure why they took the whole front end apart?

@jo47762

3 жыл бұрын

@@scstinger5 I’m not sure why, but they’re misleading people.

@brianh5609

2 жыл бұрын

I was also curious to this since they installed the headlights and grill before installing the bumper.

This is the first video I’ve seen that explains it fully. Thank you!

@Realtruck

3 жыл бұрын

Glad it was helpful!

Excellent tutorial! Thank you!

“Cahones Cahones” paso por paso You showed me and whoever’s watching every step of the way Cahones “I appreciate alll the knowledge you instilling

for an oem, would you have to swap over brackets from the bumper?

That's exactly what I needed thank you!

@Realtruck

2 жыл бұрын

Glad it helped!

Worked like a charm, thanks brotherrr

@Realtruck

2 жыл бұрын

Glad it helped! :)

What is the part called that the side valance support bolts onto @realtruck

Thanks for share

What rims and tires are those.. thanks in advance

Thank you

I replaced the front bumper on my 2013 Ram 1500 but I only removed the 3 bolts connected to the frame on each side and pulled the bumper off, moved all the clips & brackets to the new bumper and re installed to the frame bolts. You don’t have to remove the lights, grill, bumper-skirt or anything els. Good video but not sure why you took the whole front end apart?

Is the bumper for sale i am interested in one of those

Thank you very much for the tutorial, it helped immensely!

@Realtruck

6 жыл бұрын

Chad Filer: You are very welcome! Glad we could be of assistance!

Good job 👍 but why u loose the 18mm nuts from the bottom of the truck ?

What does the white clip look like exactly?

I wish somebody made a video on removing the front bumper on the 2009 Dodge Ram 2500

“And just remove the 10mm bold like so” *Bolt falls behind bumper* “Just like that”

If your just needing to remove the chrome part you don't have to remove the headlights. On 14 ram hemi

So if you are only removing the chrome section (to replace because of damage) and replacing with an original you don't actually have to remove the grill etc am I correct? Would you just disconnect the wiring and remove the 6 x 18mm bolts and the full chrome section should come away and refit with a non damaged one?

@Realtruck

2 жыл бұрын

Hey there! That would probably work. When we removed this bumper, it was to replace it with an aftermarket bumper that also replaced the painted portion above the bumper. That required removing the grille and headlights too. If you're replacing the chrome part with factory, disconnect the harnesses and loosen the 6 bumper bolts so that the bumper drops a little. At that point, you should be able to see if there's anything obstructing the removal. Also, swap out the harness, sensors, and fogs, and transfer them over before you reinstall the new bumper. Way easier like that! :)

I wonder if this same process for a 2018 ram 3500

@nathancole9823

4 жыл бұрын

Juan Guillen pretty much

where is the horn located !?

Does the bumper without the fog lights have the same mounts as the bumper with the fog lights?

@Realtruck

3 жыл бұрын

Hey Sergio! Yes, it does.

Better way to remove grill is stick your arm down in behind it and push outward

Real question is...how many 10mm’s were lost in the production of this video? 👀

Wait...so why did you remove the grill and all that other fancy trim stuff? If replacing an OEM bumper with another OEM...isn’t just the 3 bolts on each side plus lights and sensors??

@Realtruck

5 жыл бұрын

knarfluna: This Ram is equipped with factory upper and lower bumpers. And in order to take off both sections to replace with an after market bumper, you will need to gain access to all the areas shown in the video to accomplish this.

@tonymontana9933

5 жыл бұрын

Heidi Stange I’m wondering the same thing. Did you find out?

@joesan08

4 жыл бұрын

@@Realtruck The question was replacing OEM to OEM. Seems like many of the Grill doesn't need to come out in that case?

@SmokinwithKasket

4 жыл бұрын

Heidi Stange thats my question too

@MichaelAMyers1957

4 жыл бұрын

@@dougwilliams44 im New to this comment thread but to be clear, so if I'm needing to relacing the bottom half of the bumper, just the chrome section, I do NOT have to remove the grill and lights ??

Don’t suppose you know how to change a headlight bulb without taking the whole front assembly apart ???

Shop Bumpers! bit.ly/2I1ysJu

i saw you drop that bolt...lol

LoL. He broke a tab. It happens.

of course he skipped the purple headlight connector removal..... gave him a LOT of trouble :-)))

5:44

Any one here Jump their truck and have a messed up bumper now? Yeah me too

@owenouthwaite8848

3 жыл бұрын

Caught a nice rut on a washed out road in the winter here in Canada, front bumber no more

Why remove the all that just for the bumper

@murphygaven1

4 жыл бұрын

Yeah im not sure cause you can just undue the bolts for the bumper and it comes off everything else isnt required inless your swapping with a different bumper design

@findingnory

3 жыл бұрын

@@murphygaven1 it looks like there are bolts behind the headlights that you can't access without removing them

@murphygaven1

3 жыл бұрын

@@findingnory i actually just removed mine for repainted on 2018 and no need for any of that there are 6 bolts that hold the bumper on and it comes right down.

@findingnory

3 жыл бұрын

@@murphygaven1 oh ok, good to know. Hey, I don't know if you remember, but could you access the outer parking sensor from underneath the truck without removing the bumper or does it need to come off to get to those sensors?

@murphygaven1

3 жыл бұрын

@@findingnory the sensors are pretty easy to get too especially if you put your front two wheel on ramps then just roll under there with plenty of room

me not having a 10 mm

If your doing this in 2023 and over please spray some blaster on those bolts otherwise they will not come out that easily them bolts are $13 ea. 😅