How to Remove Code Install New Ignition Lock Cylinder 07-14 Chevy Suburban 1500

Автокөліктер мен көлік құралдары

Buy Now!
New Ignition Lock Cylinder from 1AAuto.com 1aau.to/ia/1AIMX00183
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn or faulty ignition lock key cylinder. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14 Chevy Suburban.
This process should be similar on the following vehicles:
2007 Chevrolet Suburban 1500
2008 Chevrolet Suburban 1500
2009 Chevrolet Suburban 1500
2010 Chevrolet Suburban 1500
2011 Chevrolet Suburban 1500
2012 Chevrolet Suburban 1500
2013 Chevrolet Suburban 1500
2014 Chevrolet Suburban 1500
🔧 List of tools used:
• 10mm Wrench 1aau.to/ohr/1AXAA00010
• Pick 1aau.to/ofa/1AXAA00037
Subscribe: / @1aauto
Check out our playlist:
Chevy Suburban 2007-2014 10th Gen: • Chevy Suburban 2007-20...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/Mx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 54

  • @1AAuto
    @1AAuto3 жыл бұрын

    √ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

  • @matthewbeske5156
    @matthewbeske51562 жыл бұрын

    Just installed this kit over the weekend.... Super easy if you have any mechanical aptitude at all! Hardest part was lining the shift lever boot back up when putting the top column cover back on! Note: No need to remove lower column cover, only top. Performed on 2009 Silverado 2500HD

  • @rhondagorby2862
    @rhondagorby28623 жыл бұрын

    I used to have to Jiggle my key for a long time before I could get my GMC to start. Thank you for the video. Problem Solved.

  • @charlesanderson8461
    @charlesanderson84613 жыл бұрын

    These guys are good. Changed out my chevy ignition, works perfect.

  • @trillxjesse8166
    @trillxjesse8166 Жыл бұрын

    Thank you, your videos help me a lot THANKS KEEP DOING THIS VIDEOS YOU HELPING A LOT OF PEOPLE

  • @c.r1469
    @c.r14695 жыл бұрын

    I Appreciate the way you teach how this done !!! Thanks !!

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +AMICALEMENT CHARLES Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

  • @salcedolx
    @salcedolx2 жыл бұрын

    Great video. Parts were perfect fit for my 07 chevy tahoe. Save me from going to dealership or hiring locksmith. 👍

  • @joedavis1404
    @joedavis14042 жыл бұрын

    Many thanks to you for this video, Cheers!!!

  • @daverson1508
    @daverson15083 ай бұрын

    Thank you!!!!!

  • @rickybarnes7573
    @rickybarnes75733 жыл бұрын

    What if you don't have a key how do I get lock cylinder out

  • @RAMZIAARON
    @RAMZIAARON3 жыл бұрын

    can you buy this with new tumblers and new keys? not my model but just curious if I am going to run into this situation with my 2005 colorado

  • @YUFlysofast
    @YUFlysofast2 жыл бұрын

    Is the vehicle shown also pass key 3? I wanna do my 08 Escalade. Is there programming or something involved in some of these

  • @CS_Concepts.
    @CS_Concepts.5 жыл бұрын

    Will this apply to Silverados also?

  • @XAlbertXWesker
    @XAlbertXWesker5 жыл бұрын

    My key wont come out once the cylinder is back in. It will go forward but not to off position. Feels like there is no spring resistance when cranking

  • @arnoldaltjr.2099
    @arnoldaltjr.20993 жыл бұрын

    If you invert top lids from medicine bottles they make great small dishes to keep small parts in while working.

  • @chrislayton4025
    @chrislayton4025Ай бұрын

    I have a 2016 gmc sierra, do o have to program new cylinder?

  • @erasmovelasques8071
    @erasmovelasques80715 жыл бұрын

    What about if the cilinder its broke inside???

  • @candicesmith9367
    @candicesmith93675 жыл бұрын

    How do i either get the 5 digit tumbler code so i can rekey the tumbler on my 2005 chevrolet malibu maxx OR remove the security feature on my ignition??? Please help!! I really dont want to pay sky high prices at chevy dealership

  • @rahrah8076

    @rahrah8076

    4 жыл бұрын

    Candice Bransford nobody seems to have that answer I have tried everywhere..if they made that video the person would have tons of views

  • @pouncerminned863

    @pouncerminned863

    Жыл бұрын

    @@rahrah8076 the videos do exist

  • @nateg652
    @nateg6523 жыл бұрын

    Is this the same procedure for a 2007 Tahoe?

  • @salcedolx

    @salcedolx

    2 жыл бұрын

    Yes. Just completed mine. 30 minute job.

  • @cham4385
    @cham43853 жыл бұрын

    Won't turn to accessory position ? gmc sierra2008

  • @tteuvky
    @tteuvky3 жыл бұрын

    so basically that how we can use the old key in new cylinder. what if we lost the key? i mean how we can take out the cylinder out of the car? also what if we want to use the new key, do we still need to code new cylinder? thanks

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Spoutnik There are kits you can purchase with a new key and lock cylinder if you have lost the key.

  • @MsSlayerful
    @MsSlayerful3 жыл бұрын

    So i HAD 2 suburbans... I recently had one of them stolen but the punk stole my keys to BOTH of my cars!! So how do I get the ignition lock cylinder out without a key???

  • @justinallen9014

    @justinallen9014

    2 жыл бұрын

    Did you steal the car laugh out loud

  • @zachbuhlke3481
    @zachbuhlke34813 жыл бұрын

    So I believe my key end has broken off inside the cylinder, and I cannot turn the cylinder to the start position, any other way to release the cylinder?

  • @guscontreras6848

    @guscontreras6848

    3 жыл бұрын

    Drill a screw into it and use a dent puller to knock it out. You will destroy the cylinder but will be able to get it out and replace it

  • @selimyenahc3184
    @selimyenahc31842 жыл бұрын

    The key cylinder will not go back in. What do I do?

  • @renebreve166
    @renebreve1665 жыл бұрын

    a question when changing the ignition lock cylinder you also have to program the key or you do not need that

  • @larrybrenner4379

    @larrybrenner4379

    4 жыл бұрын

    I have just done this on a 2016 Nissan Frontier pickup. I had purchased a used lock assembly from the wreaking yard. The secured system would not allow the car to start because the chip in the used lock key was not the right code for the pickup. ( theft system) It also had a push pin to release the tumbler assembly. I used the key ( it had proper chip) that came with the pickup and changed the tumblers out just like this video did. I am assuming that you could purchase the tumbler assembly from the dealer. But it is not designed for removing tumbler like the GM product. I had to drill to small pins out to remove the tumbler assembly. On reinstalling I used a small drill bit that I cut off for the replacement pins that I drilled out previously. Note! the receiver that wraps around lock assembly that reads the key does only that. My used ign lock from the wreaking yard receiver worked fine. No programming necessary. Receiver reads the chip in the key and turns off the theft system and truck started. I hope this helps somebody who is having this problem with the theft system on today's cars.

  • @rahrah8076

    @rahrah8076

    4 жыл бұрын

    Larry Brenner you could of just held you’re original key to the receiver and tricked the receiver and then your key would work

  • @larrybrenner4379

    @larrybrenner4379

    4 жыл бұрын

    I also wanted the original keys to work in the door lock assy. That is why i changed the tumbler assy to be like the original. I did trick the ign to work and was able to start engine. This vehicle had been stole and i didn't know if other issues were present. T

  • @rahrah8076

    @rahrah8076

    4 жыл бұрын

    Larry Brenner also dorman has ignition lock cylinder with on-board programming comes with keys another set where you don’t need the original keys..

  • @TonyVM775
    @TonyVM7753 жыл бұрын

    Would this cause a b1380-06 code?

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +WorldsWorst Fifaplayr This would indicate a short to the battery. We would suggest having a local mechanic diagnose this for you.

  • @JohnSmith-cw3ib
    @JohnSmith-cw3ib4 жыл бұрын

    I did as shown , but my key wont turn forward

  • @garciajusmel99

    @garciajusmel99

    3 жыл бұрын

    It could be that your key is wasted mate

  • @martinklassen6059
    @martinklassen6059 Жыл бұрын

    Please help my ignition key won’t at all no matter what I try or do please help i need it back asap

  • @angeljavalera2624
    @angeljavalera26245 жыл бұрын

    The original lock was missing one of the tumblers is that normal

  • @hmata3

    @hmata3

    5 жыл бұрын

    Another video says it's normal to have some tumblers missing.

  • @danhammond8406

    @danhammond8406

    3 жыл бұрын

    The first style had 1 missing

  • @carlinmorales3481
    @carlinmorales34815 жыл бұрын

    i need you help please

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +carlin Morales How can we help you?

  • @cham4385
    @cham43853 жыл бұрын

    Help

  • @franciscofelix2518
    @franciscofelix25185 жыл бұрын

    My key dont move

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +Francisco Felix Double check that your tumblers are in the correct order

  • @marshelias1
    @marshelias13 жыл бұрын

    I have a 2008 gmc envoy I have replaced the ignition switch and the key switch/tumbler. But now truck want turn off. I have to pull out fuses and disconnect battery. Also notice that key doesnt spring back forward on turned on so do it manually and when I put drive it cuts off. What's that about. Help please.

  • @PatriciaGonzalez-ey6hs
    @PatriciaGonzalez-ey6hs5 жыл бұрын

    I recently had my ignition switch replaced.... now my power windows don't go up or down???

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +Patricia Gonzalez We do not have a way of being able to diagnose the issue that you are experiencing with your vehicle but suggest taking it to a local mechanic for a proper diagnosis.

  • @terryglenweaver
    @terryglenweaver5 жыл бұрын

    I have no key... Zero key, and need to unlock the steering wheel on my 2008 Chevy Express.

  • @submittedbymail
    @submittedbymail3 жыл бұрын

    Why did your friend tell me to take apart the whole dashboard.

Келесі