How to Remove and Install a 2013-2018 Nissan Altima Side View Mirror | Step by Step | ReveMoto
Автокөліктер мен көлік құралдары
Where to Purchase Painted Mirror: bit.ly/AltimaSVM
This quick video guide will show you how to install a Nissan Altima side view mirror for your 2013-2018 model. Let's get right to it!
0:00 Start
0:04 Tools needed
0:19 Remove the inner door handle bolt cover
0:48 Pop off the door panel from the bottom
0:58 Don't forget about the bolt underneath the window controller
2:14 Pop the door panel off by lifting and pushing it up
2:17 Optional: Remove the lower harness plug (we let it hang)
2:24 Remove the Altima side view mirror interior cover & remove the plug
2:36 Remove the broken side-view mirror
3:42 Inspect your brand new Nissan Altima mirror painted by ReveMoto ;)
3:56 Side view mirror installation
8:19 Enjoy driving safe with your new mirror
We'll show you how to remove and install a painted 2013 Nissan Altima Side View Mirror. This how-to tutorial could also be used to replace your 2014-2018 Nissan Altima side view mirrors since this particular mirror will fit all those years.
UPDATE: For the newer models (2018) you will have to remove the door handle cover/trim next to the window regulator/switch to remove the door panel. Thank you Jeremy McMillan for the update!
Subscribe: kzread.info?su...
Using everyday household tools, like a ratchet wrench and flathead screwdriver, we'll remove all of the parts necessary to remove the old, damaged mirror and then use the same hardware from the old mirror to install our brand new, painted side-view mirror from ReveMoto.
In the video, the mirror we'll be using to replace the original mirror is this 2013 Nissan Altima (Sedan) Passenger Side View Mirror Painted White Pearl (Paint Code: QAB)
Thanks for watching with us and comment below if you have any questions about our video or ReveMoto's painted Nissan Altima side view mirrors!
#Nissan #Altima #PaintedSideViewMirror #HowTo #DIY #ReveMoto
Source: www.revemoto.com
Follow Us on
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
________________________________________________________
#NissanAltima #Nissan #paintedautoparts #Altima #highquality #DIY #HowTo #revemoto
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 234
Buy our brand new painted mirror below! Purchaser: bit.ly/AltimaSVM Website: www.revemoto.com Visit our website and chat with us, thank you for watching!
Dealership wanted $750 to install a new mirror. Thanks to you, I was able to do it myself for less than $250 and under 30 minutes. This video made all the difference in the world. And now my wife thinks I'm a genius too. :- )
@jpduncan5565
5 жыл бұрын
BTW, the mirror we purchased from you was a perfect color match for our car...... Nice job...
@ReveMoto
5 жыл бұрын
@@jpduncan5565 Thanks! Glad to hear the color-matched perfectly with your mirror. And, thank you for letting us know this video helped. Always great to hear feedback from our customers, and we'd say you ARE a genius for only taking 30 minutes your first time! Kudos to you :)
@THEHEAVYSPITTERSDVD
3 жыл бұрын
I paid $40 for mirror from ebay
This video saved me hundreds of dollars it only took me an hour to fix thanks for the help!!
@ReveMoto
4 жыл бұрын
That's awesome! Glad to hear that it was helpful :)
This video helped so much, I was able to change my mirror under an hour for less than $50. Thank you
@ReveMoto
5 жыл бұрын
Not a problem, that's what we're here for. Thanks for watching!
THANK YOU SO MUCH! I was able to do this myself (61 yo female) in about 60 minutes. Kept referring back to the video to be sure/safe. And I didn’t have but a crescent wrench and screwdrivers. Much appreciated!!
@ReveMoto
2 жыл бұрын
That's awesome! We love to hear it and that is why we make these videos. Thank you for watching!
Thanks. Super easy instructions. I followed it and save $200 of labor. One of the best instructions video on youtube.
@ReveMoto
3 жыл бұрын
We make these videos for these types of comments. Thank you for watching!
As someone else already said, this video also saved me a lot of money and a lot of time! Thank you for posting this video!
@ReveMoto
3 жыл бұрын
We're here to help. Thank you for watching!
Thanks for your step by step method. I just finished replacing my wife’s passenger side mirror about 15 minutes ago. Your video was a BIG help. ✌🏽
@ReveMoto
4 жыл бұрын
That's what we like to hear! Hopefully you wont have to replace it again😎.
Thank you so much for this, first Autozone played me charged me hella extra Then its the wrong color and then told me I need my own mechanic. KZread is the mechanic 💪🏾💪🏾
@ReveMoto
3 жыл бұрын
Ayee. Don't let them get you. We're glad we could help!
Thanks dude , you make it look mad easy
@ReveMoto
3 жыл бұрын
We appreciate it! Anyone can do this install, good luck!
Watching the video actually makes me look forward to tackling this project.
@ReveMoto
2 жыл бұрын
Hello and we love the enthusiasm! Thank you for watching.
This video saved me a lot of time & money! Thank you so much
@ReveMoto
3 жыл бұрын
That's awesome, thanks for watching!
Literally just did it and it and thank you!! 🙏🏾🔥🔥
@ReveMoto
2 жыл бұрын
You're very welcome! We're glad we could help out. Thank you for watching!
Thanks for the video...I'll give it a try. It worked just fine. It was easier for me to pry the piece behind the handle from the left. Thanks...great video.
@ReveMoto
4 жыл бұрын
Thank you for the tip!
Really great video! Easy to follow and saved me a bundle of money!
@ReveMoto
3 жыл бұрын
We love to hear it, thank you for watching!
Excellent video, very helpful!
@ReveMoto
4 жыл бұрын
Glad it was helpful!
Thanks with your help did it in 20min
@ReveMoto
2 жыл бұрын
Glad it helped and thanks for watching!
My local Nissan dealership wanted about $780 give or take to replace my passenger side window. I ordered one off Walmart did it myself only cost me about 48 bucks I am really grateful to you for showing me how it’s done
@ReveMoto
8 ай бұрын
Glad to hear it! If you need any other parts, we sell them painted on our website too revemoto.com. But, hope you'll be good for a while!
Very helpful, thank you so much!
@ReveMoto
4 жыл бұрын
You're very welcome!
Thank you thank you thank you thank you thank you. This one took me 30 minutes to do because of this video.
@ReveMoto
4 жыл бұрын
Sweet! We are glad we can help.
Thank you bro, helped me out a lot
@ReveMoto
2 жыл бұрын
Glad to hear it!
Life saver, thanks!
@ReveMoto
5 жыл бұрын
Glad to be able to help!
Reve Moto, thanks for the replacement mirror and video 🙂
@ReveMoto
4 жыл бұрын
We are glad we can help. Thank you for giving us a chance.
great video. I just damaged my Pathfinder 2018 passenger side mirror (hitting the garage door). the dealer asked for around $600 to install and calibrate the sensor(blind spot). now I can do it and save big. thanks .
@ReveMoto
4 жыл бұрын
We're glad we can be of help. All car mirrors follow the same install basics; electric cable and 3 bolts. Good luck!
Thanks so much for the video!
@ReveMoto
3 жыл бұрын
Glad it was helpful!
Thank you this was very helpful!
@ReveMoto
5 ай бұрын
Thank you so much glad it helped
thank you for this video
@ReveMoto
Жыл бұрын
You're very welcome! We got tired of watching 1-minute "how-to" videos. Please subscribe, it helps us grow! 🤘
Great video!! I replaced my side mirror today 🎉
@ReveMoto
2 ай бұрын
Nice! Love to hear it! 🙌
Just installed a mirror my wife broke, all done in just 20 minutes! Thanx for this instructional video!
@ReveMoto
3 жыл бұрын
It's our pleasure, thanks for watching.
Thank you !
@ReveMoto
3 жыл бұрын
You're welcome! Thanks for watching. 😃
Thanks for participation in the discussion with valuable suggestion.?
@ReveMoto
2 жыл бұрын
Always welcome, we think? Take care!
Nice job
@ReveMoto
5 жыл бұрын
Thanks!
Amazing Job Bro, Thanks
@ReveMoto
3 жыл бұрын
It means a lot, thanks for watching! We're here to help.
@jmnz_photos
3 жыл бұрын
@@ReveMoto thanks to your video today I replaced the driver's side mirror in just 17 minutes myself
@ReveMoto
3 жыл бұрын
@@jmnz_photos Niiiice! We love to read it.
thanks a bunch.
@ReveMoto
2 жыл бұрын
You're welcome!
Thanks bro
@ReveMoto
2 жыл бұрын
No problem, thank you for watching!
They show this sped up but actually he has a lot of finesse popping those parts of with just a screwdriver .dude a like a ninja
@ReveMoto
4 жыл бұрын
Haha, thanks for the support. 🤘
THANKS!!!
@ReveMoto
3 жыл бұрын
You're welcome!
Thanks!
@ReveMoto
Жыл бұрын
Thank you so much for the tip, it's actually our first ever! We're glad we could you and so many other folks. Take care!!!! ❤
At first I was going to ask why did you take off the whole door panel just to get to the cord but now I see why...👍🏾
@ReveMoto
2 жыл бұрын
Hello and yes, haha. We try to do less work 😅. Thank you for watching!
Do the SR models come pre-wired for the mirror lighting too? 2017 Nissan Altima SR Midnight Edition here.
Took me twenty minutes!! Thank you!
@ReveMoto
3 жыл бұрын
We love to hear it!
Great Video!!! Thx!!!
@ReveMoto
2 жыл бұрын
Glad you liked it!
2014 Altima here. Walked out of the doctor's office and the plastic cover was gone. My wife found a replacement assembly, I found your video and here I am, sitting on the couch again. Only suggestion, when replacing the big panel, first align it next to the window track and work downward. Easier for me. Thanks.
@ReveMoto
4 жыл бұрын
Awesome - thanks for adding the tip!
Thank you for your video! Are the instructions the same for a 2014 Nissan Murano?
@ReveMoto
5 жыл бұрын
Hi Gena! They should be similar. Sometimes, depending on the model, you don't have to take off the entire door panel, but we usually find it easier to do so. Good luck!
Sir, thank you so so much in regards to changing the speakers. Do you have a video for that? you make it dummy proof! Thank u sir
@ReveMoto
Жыл бұрын
Hi Glenn, appreciate the kind words. Sorry wish I did have more videos for this vehicle, but only have the mirror install at the moment.
I like that look very simple now a question how to add the turning signal wire Trying to install new mirror with signal lamp Coming from non signal lamp
@ReveMoto
5 жыл бұрын
Hi Alex, you'll definitely need to change out the wiring, and we haven't actually done it in-house. So, unfortunately, we don't have a video to help you with that. Sorry about that. But, let us know how it works out when you do!
Came here to learn how to do this by myself since I am a girl and don’t know what the heck I was doing, stayed here because the guy is cute. Thumbs up 😌
@ReveMoto
4 жыл бұрын
We'll be sure to tell him. We are happy we could help!
@jeffreyford4568
3 жыл бұрын
Giselle Montiel hey how are you?
Funciona si coloco un lateral con direccional a uno que no tenia?
I like your video very much and will speak to my brother-in-law about acting as my "foreman" on fixing my mirror on the driver side. The question I have is that I viewed a video that showed them being able to change out the mirror without having to remove the indoor panel. What could be the problems or pitfalls of doing it this way? Thanks in advance for your answer.
@ReveMoto
5 жыл бұрын
Hi Paul, thanks for the feedback! Glad you liked our video. Just want to double check, on the other video you saw, was it for the newer model 2013-2018 Nissan Altima? For the older models, you can get away with just taking off that corner cap piece (the piece we take off after removing the door panel) since the plug is immediately visible. However, from our experience with the newer models, as you'll see in the video, the plug actually sits a little lower near the edge of the door, so we found it easier to remove the door panel to prevent from trying to squeeze our hands through to get to the plug. Hope that helps!
Thanks man 😘
@ReveMoto
2 жыл бұрын
You're welcome 😊
Hey I just got done installing these and it works only problem is the signal lights don’t work.. idk if my car doesn’t allow it or what but I have a Nissan Altima 2016
@ReveMoto
2 жыл бұрын
I would start by looking at the pins on the plug and match them up. If there is an an extra pin, then it's probably bc the car doesn't support the signal feature. It could also be a faulty turn signal, it's rare but it happens. You can also check your fuses. Please let us know if that works out. Thank you for watching!
Thanks for the video, what size socket did you use?
@ReveMoto
5 жыл бұрын
Hello! Most mirrors will use smaller bolts that range from 8mm-10mm. Most Japanese cars will be even numbers and American cars are sometimes odd numbers.
Thanks for this ..I hit a garbage can and knocked my right mirror off! Must have been pretty full 🤔 just got my new mirror delivered
@ReveMoto
9 ай бұрын
That’s actually a really common thing that happens believe it or not. Go to www.ReveMoto.com for parts next time
@lethalgames4315
8 ай бұрын
funny you say that, just happened to me the other day. it was night and someones trash can was in the road, by the time i seen it, it was too late
@jesethbelle
8 ай бұрын
me too omg!
Are we able to plug and play a mirror with turn signal into the altima that previously did not have the turn signal feature?
@ReveMoto
5 жыл бұрын
Normally, no. It depends if the connector has a space for the pin. Even then, it may work but probably won't. I know that's vague but you would just have to try it out. Most of the time it does not function or it could but may cause another feature to not work. For example, the turn signal may work when you install it but the power function to adjust your mirror may not work.
If my car doesn’t have the turn signals on it’s mirrors can I buy some mirrors that do have the turn signals on them and just plug them in and they’ll work
@ReveMoto
3 жыл бұрын
Yes and no. You have a 50/50 chance on it working. Your car has to support the function. Sometimes manufactures make every car with the capability but you you have to purchase the mirror for it to work. Or, your vehicle may not support the signal function and you could be stuck with dysfunctional mirror. I would compare the pins on your current mirror and one with a turn signal. Just to make sure they have the same plugs. You have a 50/50 shot, maybe ask a friend or colleague that has a turn signal mirror and plug it into your car. Check the Nissan forums for answers, those guys usually know it all. I believe the Maxima mirrors are compatible with all models but I am not sure on the Altima's. We always recommend sticking with the mirror you VIN corresponds too. Let us know if you try it, good luck!
Wife broke the right mirror first and now the left one 🤦♂️ sure will be needing this video soon. I can’t buy anything nice 🙄
@ReveMoto
Жыл бұрын
Yikes! Sorry to hear that. Hopefully at least you can save on the install 👌
@kenvul2875
Жыл бұрын
😂😂
I need help please. I don’t need the whole passenger side window. The plastic light cover covering the light bulb is the only part I need. Do you know where I can get that?
@ReveMoto
3 жыл бұрын
Hello. I think your referring to the turn signal. That is not sold anywhere at all but I would try the dealership. I doubt they sell it but I would start there. If they do not, I would buy a used broken mirror at a junk yard and take the part you need. Thanks for watching!
Do you have a video for a 2017 Maxima? Same thing needs to be done
@ReveMoto
4 жыл бұрын
Not yet! I wish we did. The process should be the same though. The screws will be in a slightly different place but the overall concept is the same. Remove the screws, pop the panel, unbolt the mirror and work backwards. Good luck!
You could’ve save a lot of time and effort by prying open the corner of the side door panel where the side mirror is and replace the side mirror without taking the whole door panel off..
@ReveMoto
11 ай бұрын
This was easier instead of potential damage to door panel
@herbsmith1415
9 ай бұрын
Factz I just did what u said and had it done in 10 mins!
How big is the socket on the ratchet wrench? And do you know any good way to remove the skull cap on the mirror?
@ReveMoto
4 жыл бұрын
Hello. The bolts/nuts for the door and mirror are probably going to be a size 8 socket. This was one of our first videos that we re-uploaded, so it's hard to recall accurately. Generally, you wouldn't go any higher than a size 10 socket on door panel or side view mirror. As far as the skull cap goes, its pretty hard to remove. You can purchase a plastic trim removal tool (pretty affordable on Amazon) or use something similar. Carefully pry the cap off so the tabs do not break. You'd be surprised how fragile they can be. Let us know if this helps, thank you!
Thanks for this video. My mirror was recently broken. Question: Where is the best place to order a matching colored replacement mirror from without going through Nissan?
@ReveMoto
3 жыл бұрын
Kai Oden Sorry to hear about your mirror. The best place to get a brand new mirror would from us, already painted. There is a link at the very top of the description or visit www.ReveMoto.com. Take care!
@kaio.8850
3 жыл бұрын
@@ReveMoto thanks. I will definitely go and look so I can order.
i think i have the confidence to fix mine now, do i need to unplug the car battery or anything first or just leave the car off to install?
@ReveMoto
3 жыл бұрын
Leave the car off but make sure you check the mirror features before putting everything back. Thank you for watching!
Wonderful video, my wife just hit the mirror.
@ReveMoto
4 жыл бұрын
Thank you. Glad it helped!
So I got power mirrors. If I install the mirrors with turn signals will they work are will additional wires have to be ran. I have an 18 SL without signal just power adjust
@ReveMoto
2 жыл бұрын
Hello! I want to say that the mirrors will probably work. I think with Nissan, you just have to buy the mirror. If you have the mirrors plug them in to see if it works, that's the best way. If they do not, check the pins and wires. There is a way to splice it but we do not know how to do that. Thanks for watching!
@alfonsorangel7895
Жыл бұрын
Did it work?
Very helpful video thank you. I have Nissan Altima 2017 SR . But I have question regarding the door light in the bottom, I have wires but not light, I did put a light but it doesn’t light, do you any hint how to connect it? Thanks
@ReveMoto
4 жыл бұрын
Are you referring to the bottom door light? If you have a plug for and install a light, it should work. I would check the bulb or the wires to see if anything is amiss. You may also want to check your fuse box and make sure everything is plugged in correctly. Good luck!
@tonytace
4 жыл бұрын
ReveMoto - Pre-Painted Auto Body Parts thank you
@alexveana1666
4 жыл бұрын
If LED bulb doesn't light up after installation, please simply re-insert it oppositely (because LED bulb has polarity like a battery).
@ReveMoto
4 жыл бұрын
@@alexveana1666 thanks for the help!
@ReveMoto
4 жыл бұрын
@@tonytace You're very welcome!
It was hard to see, but did that mirror include blind spot monitoring? Do you know if it would be the same install?
@ReveMoto
5 жыл бұрын
YES, it would be the same install. An extra feature would only have an extra pin in the plug for it or a 2 plugs for the electrical wire. The mirror did not include blind spot monitoring. Blind spot monitoring and auto-dimming tend to be features only the dealership will sell. I hope this helps!
@ryanschneider5926
5 жыл бұрын
Thanks for the help!
I have a 2018 and you have to take off the handle trim before the lock/window switch.
@ReveMoto
4 жыл бұрын
Did they change it on the 2018? I know small changes get made over the years but we'll definitely update the description for the 2018 models. Thanks for the head up! ✌
@jeremymcmillan2120
4 жыл бұрын
@@ReveMoto the door trim is inserted into part of the lock switch housing no big deal this video still was super helpful!
the side mirror seemed not to be the OEM one. mine has the blind spot sensor, does it need to be calibrated and how?
@ReveMoto
4 жыл бұрын
Hello. Blind spot sensor option usually are only sold by the dealership. Typically, no calibration is needed because the sensor uses radar waves that only shoot out at one wavelength. I hope this helps!
What size socket are you using on the wrench ?
@ReveMoto
3 жыл бұрын
I believe it was a size 8mm or 10mm socket
What size socket do I need for this? I have to replace my driver side mirror that got taken clean off by a traffic cone. 2014 Altima
@ReveMoto
2 жыл бұрын
Hello and sorry to hear that. Nissan's typically have 8-10mm bolts for the side view mirror. I don't recall exactly but it's probably a 10mm. Please check our our website and chat with us if you have any questions.
@zachtravis3673
2 жыл бұрын
@@ReveMoto i
I have an 2018 altima, this still follows suit with whats demonstrated? Also what tools size?
@ReveMoto
3 жыл бұрын
Hello and it should be similar. The bolt size was an 8mm, I believe. Try and use a plastic trim tool to remove the panel or just wrap a flat-head screwdriver with a small cloth. You want be careful not to damage the plastic panels. Thank you for watching!
@jacobking962
3 жыл бұрын
10mm for 2015
@ReveMoto
3 жыл бұрын
@@jacobking962 thanks for the update!
👍👍👍
@ReveMoto
2 жыл бұрын
thank you!
Thanks someone side swiped me and drove off the dealer wanted to charge me $400 in parts and probably more in labor I bought it at a junk yard did it myself
@ReveMoto
3 жыл бұрын
We're glad you saved $$! Thank you for watching.
does this process apply to a 2013 nissan altima as well?
@ReveMoto
2 жыл бұрын
Yes, it should be the same for the 13-18 Altima. Thank you for watching!
@goatsaproblem8297
2 жыл бұрын
@@ReveMoto thank you !!!
What size tools did you use for this job
@ReveMoto
4 жыл бұрын
We used a 10mm socket for this mirror :)
Or you can just pry the side of the panel under the mirror with a panel remover and the mirror panel will come out and expose the three screws.. No guarantees. Worked in 10 secs for me
@ReveMoto
3 жыл бұрын
You certainly can. We just took the panel off for visual purposes. We definitely, like the faster method. Thank you for watching!
Would this work with a 2019?
@ReveMoto
4 жыл бұрын
The install should be pretty identical to this video. If you are referring to the side view mirror, no. They are different models.
I have to replace my passenger side mirror on my 2016 Maxima, is it the same or similar?
@ReveMoto
5 жыл бұрын
Hey Joshua! It is extremely similar. So much so, that it's practically the "almost" the same. Every car has a 3-4 bolt pattern that holds on the side view mirror. I think for most Nissans, you do have to remove the door panel. Even if you had an Acura that with a door panel you had to remove, it's the same process. The screws would probably be in a different place is all. I hope this helps!!
@Mister_Majestic
5 жыл бұрын
@@ReveMoto Thanks buddy! *Subscribes*
Is this the same instructions for a 2018 Nissan Sentra?
@ReveMoto
3 жыл бұрын
Not exactly same but should be nearly same. All Nissan's will pretty much have the same design. The screws for the door panel, if you have to remove the door panel may be in slightly different places. The engineering is still the same, 3 bolts and the electrical wire to unplug. Please let us know if you have more questions. Good luck!
Does the door frame just line up?
@ReveMoto
6 ай бұрын
Yes sir everything lines up just like original. Go to www.ReveMoto.com
What is the size for those bolts
@ReveMoto
3 жыл бұрын
I believe they were a size 8mm on the door panel and a size 10mm on the side view mirror. Any standard socket wrench set should have the right sockets size. Thank you for watching!
On what site did u order the part ?
@ReveMoto
Жыл бұрын
Go to www.ReveMoto.com. It’s already painted to match your vehicle
how much you charge for this replacemnt and where r u from
@ReveMoto
Жыл бұрын
We are located in Houston, TX and here is the website www.ReveMoto.com
hey what if mine don't have a turn signal can I add it to it and get the turn signal to work?
@ReveMoto
4 жыл бұрын
Hi Jeffery, we can't say with 100% confidence since we haven't tried with this model, but pretty sure it won't work. We've had some customers get a full featured mirror (auto-dimming, signal light, power) changed to a basic mirror (with just signal light) and have it work, but haven't had someone do it the other way around. Sorry we can't be of more help!
@davidmckay9552
4 жыл бұрын
@@ReveMoto I'm pretty much just guessing on the wiring harness.sometimes its just cheaper to use a one size fits everything harness o just a couple of variations.low or high
@ReveMoto
4 жыл бұрын
@@davidmckay9552 If you were an electrician or know one, they could probably wire up a fix. I haven't seen universal plug or wire harness but that could probably work. Sometimes manufactures wire harness has the option features for signal, etc.. but they don't include the pin for it on the plug. Electrical issues are usually a headache....🖖
@17sylargino
4 жыл бұрын
@@ReveMoto hey man, so I have the stock mirrors with no turn lights on... I'm thinking of purchasing the ones with the turn signal on them and adding them. Are you telling me the turn signal won't work? www.1aauto.com/2013-16-nissan-altima-mirror-set/i/1amrp01279?f=843910&y=2013
Did you get your mirror from nissan?
@ReveMoto
2 жыл бұрын
Hello and no. We sell the mirrors from our online shop. Please visit there and and feel free to chat with us if you have an questions! bit.ly/AltimaSVM
Could just the glass be removed
@ReveMoto
2 жыл бұрын
Hello and yes, you can replace the glass only. You would have to gently pop the glass off. It is held on by plastic clips in the center of the glass. If your mirror is heated, it will have a couple connectors as well. We also recommend buying just the glass from the dealership. They are usually the only ones that sell it. Cheers!
Damn, I gotta take out that whole side panel for the mirror? Hopefully i dont break any snap on hooks lol
@ReveMoto
3 жыл бұрын
Once you get all 4 screws off, you just have to pull the panel out on the bottom and push it up by the window. It's not too bad. Good luck and thank you for watching!
@epic1761
3 жыл бұрын
@@ReveMoto thank you so much, that will help big time, i subbed
@ReveMoto
3 жыл бұрын
@@epic1761 Thank you so much!
How can do that for Nissan Pulsar hatchback ?
@ReveMoto
3 жыл бұрын
Hello Ramdeen. I believe the removal/install is similar. I am not sure if the electrical cord is behind the door panel or right next to the mirror. All mirrors roughly have the same design. Three bolts hold the mirror on, attached to an electrical cord. Good luck!
@Ramdeen
3 жыл бұрын
@@ReveMoto thanks, managed to get it done by trial and error.
@JimmyJamesEOTT
3 жыл бұрын
@@Ramdeen where di you buy the mirror holmes? some good for nothing street punk just smashed mine off and drive off.... im based in the uk cheers.
This should be: How to scratch a door panel with a screwdriver. Use a plastic trim removal tool not a screwdriver like this video instructs, at least if you like having interior door panels without screwdriver scratches and pry marks.
@ReveMoto
4 жыл бұрын
Thanks for sharing the tip! We're starting to use the plastic trim removal for our newer videos.
What is the name of the tool you used to remove the screws ?
@ReveMoto
3 жыл бұрын
Hello! The main tools we used were a ratchet wrench and a philips screwdriver.
@kielar11
3 жыл бұрын
@@ReveMoto What size ratchet wrench did you use?
I put the same mirrors on mine but the turn signals aren't working, why? It doesnt support it?
@ReveMoto
Жыл бұрын
Hi Manuel, does your original car come with turn signals? It will only work if it originally came with your car since it's wired to do so
@KJTEJ
Жыл бұрын
@@ReveMoto Nope, I checked on the web and is a no. I can modify and manually wire it to do so, but it's gonna be a pain in the ass
@RoyalEagle1960
Ай бұрын
@@KJTEJHow did you do it? My 2015 Altima did not come with the turn signal. Is it DIY or mechanic helped? Thanks!
Same for 2012??? Nissan Altima2.5S
@ReveMoto
5 жыл бұрын
Hello! Yes, this is the same for a 2012 Altima. Most side view mirrors are essentially the same. They are held on by 3 bolts (sometimes 4) and the electrical plug. Some cars you have to remove the door panel and other you don't have too. The removal process follows the same steps and processes. On Japanese cars, the bolts will usually be an 8mm, 10mm or 12mm (usually even #'s). American cars/trucks will be a mix of odd and even #'s for bolts and screws. I hope this helps!
@luisanguiano6458
5 жыл бұрын
@@ReveMoto como cambiar la luz LED de un nissan Latina 2012
@ReveMoto
5 жыл бұрын
@@luisanguiano6458 No tenemos un video para los faros del coche. Usted puede buscar videos de un Maxima o un Sentra. Podrían ser similares.
Stacy Johnston
@stacyjohnston4715
4 жыл бұрын
I have a 2015 Nissan Altima, my BOYFRIEND hit something and broke the mirror. This video is the bomb! I bought a new mirror and replaced it in about 25 minutes. My only warning; be careful when removing the trim by the door handle. The little latches used to hold it on are so tiny and fragile I accidentally broke them off trying to pry off the trim; nothing a little glue couldn't fix. Thanks for the video. Oh and by the way, popping off the door panel was nothing, it came off exactly as it shows in the video
@ReveMoto
4 жыл бұрын
@@stacyjohnston4715 This really makes us happy! We're glad we could help out. Thank you!
All of this for my mirror?? I'm doomed!! I bought one but I guess I will have someone else put it on 😌
@ReveMoto
5 жыл бұрын
We have faith in you! It's a lot easier than it looks. Ask a friend or relative to help you out. It is easier going to a body shop but they will charge for at least 2hrs labor, ranging from $40-60 an hr. GOOD LUCK!
@jayperez9179
4 жыл бұрын
Taylor Benning all you have to do is pop the upper part. the little black box on the side of the windows it comes off you don’t need to take the whole damn panel off lmfao
A GIANT thanks to everyone for watching our video. We do it because we like to help. Where to Purchase: bit.ly/AltimaSVM If you need any other painted auto parts, visit us here : www.revemoto.com
definitely needed gloves for that job
@ReveMoto
4 жыл бұрын
The gloves are a big help!
You hand crank like a chipmunk. Good stuff though.
@ReveMoto
3 жыл бұрын
Haha, the power of editing. Thank you for watching!
💪👀👍
@ReveMoto
5 жыл бұрын
Thanks Ed!!
Yall want 400 👀 😬. Gg
@ReveMoto
2 жыл бұрын
Hello Dawort. Sorry for the late reply. I had my products team go in and check the pricing for the mirrors and it was lowered. We have a lot of products and we don't always get to update the price in time. Have a great day!
Doing to much lol
@ReveMoto
Жыл бұрын
Looks like you don’t know what you doing. That’s why you watching. You doing too much typing