How to remove a Ferguson TE20 or 35 Steering Knuckle (The Easy Way)
Автокөліктер мен көлік құралдары
In this video I just show a quick tip on how I release the taper on a steering knuckle on a Ferguson TE20 steering arm. The same goes for the Ferguson and Massey Ferguson 35. You could wrap the steel plate in rag if you didn't want to scratch your paint.
Пікірлер: 52
Thank you again for saving my day. Very handy to come inside, put on the kettle and have the problem solved straight away.
@BundyBearsShed
3 жыл бұрын
Glad to help.
Like your style Lance you got me going. Happy 70th Birthday Old Grey Ferguson
@BundyBearsShed
5 жыл бұрын
Nice and easy is the go.
London Calling - well somewhere in rural England. Excellent tip Lance, the amount of times that I have struggled to release these. Well no more, thank you. Chris Coopes.
@BundyBearsShed
7 жыл бұрын
Thanks Chris, Hope it helps somewhere in rural England.
Easy when you know how. Keep up the good work Lance.
@BundyBearsShed
7 жыл бұрын
Just a quickie that one.
The good ones make anything look easy
@BundyBearsShed
7 жыл бұрын
Ron Kennedy thanks Ron
Excellent idea thank you
@BundyBearsShed
9 ай бұрын
You’re welcome 😊
Thanks, I was not having any luck doing it my way. it took a few more tabs than you did but maybe I was being a bit too cautious!
@BundyBearsShed
Жыл бұрын
They do get quite stuck from time to time.
Another great tip. Thanks Lance
@BundyBearsShed
7 жыл бұрын
Thanks Tony.
thanks again Lance!
Thanks mate
@BundyBearsShed
Жыл бұрын
Happy to help
Thanks again Lance.
@BundyBearsShed
5 жыл бұрын
Thanks Jim
Bloody handy you are Lance!
@BundyBearsShed
3 жыл бұрын
I am a bit handy eh, lol.
@niallthorogood1595
3 жыл бұрын
@@BundyBearsShed i was doing this very job yesterday and thought about the casing and wondered if someone had done it, low and behold the first video comes up! Bundy bears, spot on 👍👍👍
great. I have TEA 20 and its stuck in reverse!!!, going have to strip it unless I get some clever insights. This video will make getting the steering box and gearbox cover off.
@BundyBearsShed
7 жыл бұрын
G day Patrick, The gear stick may just be stuck, I have got them free by putting a big screw driver in through the gearbox oil filler hole and moving the selector. You might get lucky.
Wow, that’s cool, thank you!
@BundyBearsShed
2 жыл бұрын
Glad you like it!
Nice work
@BundyBearsShed
4 жыл бұрын
Thanks
Sehr gut Lance
@BundyBearsShed
3 жыл бұрын
Thanks Gunter
that will work well done
@BundyBearsShed
7 жыл бұрын
G day Bill, It works ok eh.
Hi, how do you fix the steering?. I turned the wheel while ball joints were off. Now 1 steering arm is facing the front and one is facing the back. The steering now apears to be out of its position now.. arms will not move now.
Hi Lance have you done a video on how to replace that seal for the steering box
@BundyBearsShed
4 жыл бұрын
On a 35 but not a TE20
@michaelzoccoli4607
4 жыл бұрын
Bundy Bears Shed are they similar?
So that's how you get the &%$* off,thanks Lance.
@BundyBearsShed
7 жыл бұрын
Well it is one way at least, there are probably many.
@roberteakins726
7 жыл бұрын
Thanks lance.FE35 by the way. :)
@Chevsbrownie
6 жыл бұрын
Hi, how do you fix the steering?. I turned the wheel while ball joints were off. Now 1 steering arm is facing the front and one is facing the back. The steering now apears to be out of its position now.. arms will not move now.
@ToreDL87
5 жыл бұрын
Emily Sweeney Auch, means you turned the rack all the way out so the pinion cant grab the tooth again.
Hey Bundy! Need some additional info, I've got replacement ends for my steering rods, how to you get them off? I've loosened the bolt but they are pretty stuck in there, any tips?
@BundyBearsShed
5 жыл бұрын
Try bashing along the tube to loosen any rust, as a last resort use heat, they can be very tight at times.
@LordIronFoot
5 жыл бұрын
@@BundyBearsShed thank you!! :)
That is a ridiculously simple solution.
@BundyBearsShed
7 жыл бұрын
And it works well and quickly.
Any tips for getting the one at the other end off? I'm assuming they are the same part so come off in the same way but ive put as much force into getting the bugger off as i dare and have now convinced myself im doing something wrong??? Do i just need to hit it harder???
@BundyBearsShed
6 жыл бұрын
G Day Steve, Same process, put a lever between the track rod and the top arm and lever hard then hit the arm with a hammer. Usually works ok.
You just can't mess with education!
@BundyBearsShed
7 жыл бұрын
Little tips and tricks help a lot on some jobs.