Local Kenworth dealer: 'we might be able to take a look in about three weeks' These guys: 'hold my beer!' Just wonderful to watch this team work !

капитальный ремонт грузовика в полевых условиях. респект и уважуха этим ребятам работягам.

@grimmw3632

Жыл бұрын

Здорово, когда не понимаешь, как должен происходить ремонт - кажется, что всё происходит по технологии и правильно. По факту на видео дикий колхоз, грязища и пыль. Судя по тому, как резво они это делают - делают они это не первый день, в этом случае не ясно, что мешает обзавестись хоть каким-то нормальным инструментом и - ВЕРСТАКОМ! Насаживать холодный подшипник молотком - тоже отличная идея! Менять колодки в тормозном барабане - да кому это надо! Грузовики после их ремонта видимо обратно к ним и возвращаются - далеко уехать не успевают.

@user-pr3il4ot2e

Жыл бұрын

Какие полевые условия?! Это элитное СТО и все работы проводятся в заводских условиях.

@user-bp9mk7bc5x

Жыл бұрын

Это участь тех ,кто считает что может все сам и технологии нам не нужны!))

Пакистанцев зауважал! 👍👍👍👍👍👍 Работаю слаженно дружно один затягивает другой наживляет как муравьи. 🙂🙂Красавчики!!!!👍👍👍👍👍👍👍👍👍👍

@theawesomeskills63

Жыл бұрын

Thanks for coming on my video 😍 also thanks for your precious appreciation 🥰 visit again on my channel for more interesting video's 🥰 love from Pakistan 🌹♥️

Ну вообще разборка и сборка на коленях без приспособлений вот это парни у нас тоже водители на трассе разбирают и собирают все механизмы и в мороз и в дождь на трассе всем парням здоровья и не ломаться

Надо коробки моторы тоже разукрашивать цветочками, тогда ломаться не будут

Следующее видео, операция на открытом сердце, теми же людьми и теми же инструментами, автор? Не верю

При ремонте коробки абразивная присадка в подарок😁

@mitkasan8915

Жыл бұрын

Это притир такой))

@waprobin

Жыл бұрын

Оооо, этот хруст песочка в масле...

These people must be a family. They work in sync. They probably work better if they are provided with a work bench. Great job.

@horstmuller7512

Жыл бұрын

Workbenches, tables, chairs and also toilet bowles are forbidden in Pakistan.

@nunyabuziness8421

Жыл бұрын

Hard to say they all look the same 😆

@Qusin111

Жыл бұрын

@@horstmuller7512 there is clearly a table in the background, I assume it is decorative ;)

@horstmuller7512

Жыл бұрын

​@@Qusin111 Hm, tables are realy rare in Pakistan, just as toilet bowles. Maybe the uses it instead of it?

I enjoyed watching these guys tear down the doohickey so effortlessly and then put the whatchamacallit back together again. Great job, fellas!

Какой то супер мастер все тряпкой протирает. Обычно с песка берут и вставляют

@hoffmann646

Жыл бұрын

Да у них там по ходу все только на воле Аллаха и работает...

@ivan_filimonoff

Жыл бұрын

то был обычный автосалон, а с тряпкой - это люксовый!

Молодцы мужики,хорошая слаженная работа!!!Дай бог вам всем здоровья!

@user-yy3om8ke6m

Жыл бұрын

какой то единый организм с количеством рук большим чем щупалец у осминога. У нас бы недели две делал самый шустрый сервис

@and23229

Жыл бұрын

мне нравится,что там много пацанов и то с каким увлечением они няньчат железяки.

@user-gu9zm5yj6g

Жыл бұрын

Автосервис на коленке 😁😁😁

@user-gu9zm5yj6g

Жыл бұрын

@@user-yy3om8ke6m и тут также, просто сьёмка ускоренная!

@user-pr3il4ot2e

Жыл бұрын

Дай Бог водителю, который на этом поедет....

Изумительно работают молотками. По железу. Феерично

@senchoprosto8602

Жыл бұрын

прям миньйоны)

What is really cool to see is how they all step in to help and do their part with getting this done and get the truck back on the road. It obviously makes the job so much easier when you have all hands in on it. Quite impressive and they are all smiling while doing it.

AlhamduliLlah, from Russia. ✌👌

@theawesomeskills63

Жыл бұрын

🌹🥰

- с каким моментом затянул? - да, моментально.

These guys work very hard I'd like to visit Pakistan someday.

@theawesomeskills63

Жыл бұрын

Most welcome bro♥️🌹

Budget repair, I could guarantee in the rest of the world that by the time the box was rebuilt it would have a parts list as long as your arm. Bearings, syncro rings, input shaft and housing etc etc. Don't forget the environmental levy and workshop consumables.

14:39 динамометрический ключ )))

@marceloevera2009

Жыл бұрын

lol

I always admire the fact that they are practically barefoot, working around heavy machinery and it appears they still have all their toes...

@theawesomeskills63

Жыл бұрын

Thanks for coming on my video 😍 and also thanks for your precious appreciation for these hardworking guys .. visit again on my channel for more interesting video's 🤗 love from Pakistan 🌹♥️

Прогресс! На картонке работают, а не в песке

@user-gh9hm5cb3s

Жыл бұрын

У нас лучше что ли век бокса не видел Всю жизнь на улице в грязи по сей день

@malcomx7115

Жыл бұрын

Sanki rusya daha iyi rusyda köpek gibi yaşiyorsunuz

@EgoriyVlasov

Жыл бұрын

@@user-gh9hm5cb3s, это ваш выбор, раз всю жизнь так работаете. И да, лучше.

هذو الرجال تاع الصاح قادرين اطلعو لبلاد يسحقو تقدير. والاعتراف. شكرا. الاكوم

Footage must’ve been shuffled, they clearly replaced that input shaft bearing retainer but the old one popped up towards the end. Amazing how clean the inside of that case got with some scrubbing. I always enjoy watching these guys work. The apprentices are always paying attention and everyone knows the drill.

Молодцы и молодежь работает.Удачи вам........

@giorgiobassi9078

Жыл бұрын

Sono. Atleti...👍💥💯👀🇮🇹🎉🎊👍

Glad to see that at least on this project they are wearing their safety flip-flops.

Throw out bearing looked trashed , no steel toe work boots , amazing . Maybe driver was playing that song......Grind them if you can't find them. Lol

اصلاح ناقل الحركه بأدوات بسيطه بدون مفكات متطوره وبدون مكينة كبس عمل رائع جدا جدا اتمني لهم التوفيق

Admiro voces. Excelente trabalho

Team “No Lube” for the win! On a serious note, this is impressive. Not a single snap on tool in sight, got to love the knowledge and skill here!

@raymeus

Жыл бұрын

I love snap on but have been hearing negative stuff about hassles when tools are broken to get replacements and quality not as good as Mac tools.

В коллективе все знают свои обязанности. Модель коробки удобна в сборке, разборке- первичный вал монтируется легко.

You men rock in my book! Great job. I rebuild transmissions here in the USA.

Though they don't have the special tools ,i admire the way they do their jobs.

Если им продать ключи с трещетками, то они за ночь смогут полностью разбирать и собирать автомобили

@user-tx7cm7mg9z

Жыл бұрын

А толк? Поменяли только подшипник первичного вала.Стакан выжимного оставили сколотый,подшипники и шестерни с синхронизаторами тоже старые.Зачем разбирали всю коробку?Сняли бы стакан и вытащили первичный вал и все.

@user-sk9hl7si7l

Жыл бұрын

@@user-tx7cm7mg9z проверить всё

.....накуя было разбирать всю коробку если было сразу видно что полетел подшипник первичного вала ??

@skaileep

Жыл бұрын

Рекламация

@jaleger2295

Жыл бұрын

Для красивого (нет) видео

@nonconformist3039

Жыл бұрын

Ты в курсе, что такое ревизия механизмов.

отличная работа☺️👍

У какого-то есть ключ с трещоткой, а в Пакистане есть куча людей рожковами ключами

Amazing job guy!!! These are the type of mechanics we need here in Canada. Try telling mechanics here to tear down and rebuild a transmission with no power tools and no fully loaded, air conditioned shop to work in. The industry desperately needs more guys like these

@theawesomeskills63

Жыл бұрын

Thanks for comment on my video😍 and ur precious appreciation for these hardworking boys,actually these mechanics belong to lower financial class families they do work day and night for the sake of just some food ,they are very honest with his work ,even they want to go other country like canada ,America but unfortunately they have no opportunity and financial support .

@theawesomeskills63

Жыл бұрын

Thanks again and again for ur precious time visit again on my channel for more interesting videos😊🥰

@ting2222

Жыл бұрын

Why would you want to go back to history? They have good working environment now with advance tools. Get the job done quickly, efficiently, hopefully with good pay. I am sure you want the same thing for you and your kids, if your son happens to be a mechanic. You don’t want to wipe your behind with newspaper, in the forest, right? Because million of people around the world still do that.

@gordonwelcher9598

Жыл бұрын

So they have to overload the trucks to get the job, then drive a dangerous vehicle to make money. After that they have to pay for repairs. Not an ideal system.

@Andrew-iq5ud

Жыл бұрын

Youre importing a million a year ensuring your children will grow up in a foreign country. Congrats bro!

As salamu aleikum, djamaat. ✋🤝 Love you, from Russia! 😉

Похоже Карабас масла шибко много не видел.

Тут суко оправками запресовываешь подшипники, боясь на них чихнуть, а этот куярит по наружной обойме подшипника! Главное у них это помыть!

@user-qd8tw4jc7y

Жыл бұрын

Бронза дифицит

@jaleger2295

Жыл бұрын

Абсолютно такие же мысли. Сразу видно, по вашему комментарию, что человек понимает о чем говорит. А не дилетанты тут в комментах, кто улюлюкает "какие молодцы" на это видео с ужасным ремонтом

@user-jb7fb9iw7k

Жыл бұрын

Может ты шибко кромка чихаешь .

@user-tr6uk7ru5y

Жыл бұрын

И ветошью протереть.

Судя по звуку компрессор точно у них есть и он работает😆👍

Хорошая работа!

Team work at it's finest .

Great work, super video! MEGA LIKE

Far out man these guys talk just like the Minions😉

Muito bom o trabalho de vcs, com poucas ferramentas fizeram tudo acontecer. A união de todos é impressionante. Parabéns!

Je suis impressionné, bravo à ces mécaniciens qui travaillent avec rien.

Naprawa polegała na rodzinnym myciu skrzyni?

tripped me tf out when the munchkin voices came in. Unreal. Hard labor. Damn.

Please take care to keep your hands from contact with the cleaning solvents, please.

@aagalani

Жыл бұрын

It's probably Kerosene. Not sure how harmful it is.

@carbpumper

Жыл бұрын

Or gas

@onlywatching6504

Жыл бұрын

Most likely diesel fuel. But i agree, i had my «dose» during the years. I’m glad im alive and kickin’

They have skills. And the work contitions are great. Good light, perfect temperature, perfect ventilation and no hysterical female «supervisor» running around and making life miserable.

Just goes to show that you don’t need a flash workshop to do a good job. Great work fellas.

@whitefox9

Жыл бұрын

Don't make stupid remarks That's most probably a return job as dirt caused the bearing to pack up

@jakelaughton683

Жыл бұрын

That gearbox isn’t going to last two minutes. There was a lock nut holding all of the gears on one of the shafts and they tightened it up with the end of a set of stilsons. It will be back in 6 months.

@bobp6742

Жыл бұрын

​@@jakelaughton683 That's why they are so quick, they've done this gearbox 50 times before.

@gordonwelcher9598

Жыл бұрын

I like the trucks painted in rainbow colors and that the employees are allowed to wear dresses.

@bobp6742

Жыл бұрын

@@gordonwelcher9598 🤣🤣

The way they beat the races in with a hammer is just incredible. We’ve seen you guys have large bottle jacks, we’ve seen you guys have stick welders and angle iron. Would someone, anyone, please weld up a basic 20 tonne press and stop pounding on bearings with a hammer!

@lm4278

Жыл бұрын

They can't. They are brown people. They do not have the mental ability to freely think like that. They continue to docthings they are shown instead of innovate. In other words... they are not capable of higher thinking. They may be able to take this trans apart and put it back together.. but that's just repeating what you've been shown. Not the same. They need a White Aryan to show them and think for them.

me gusta ver esos jóvenes trabajando con tanto entusiasmo 👍👍 Acá en Argentina los pibes prefieren mudarse a otro país antes que ensuciarse las manos

@binladenalv

Жыл бұрын

Imajinese cuantos machuca es no se an dado en los dedos de los pies en muchos videos salen unos ke no tienen dedos por amputaciones bro unos zapatos de caskillo les resolvería la vida

Nice workingshoes...!!!!

me gusta como trabajan en conjunto son unos chingones

Love watching these guy’s......👍🏻🇺🇸🇺🇸🇺🇸

@theawesomeskills63

Жыл бұрын

♥️🌹

Very impressive workers.

Absolutely amazing. These guys are such a great team and work in sync so perfectly and so fast. It looks like they repaired that transmission in a matter of hours. I had to rebuilt my car's transmission here in the US and it took almost 4 weeks. I should have taken it to Pakistan and fixed there. It would have been much much quicker. Well done guys.

@kashkot2572

Жыл бұрын

That's true Simon S. The truck didn't even lose that load.

@vietvu129

Жыл бұрын

Same here... 4 weeks and counting. LoL

@moto9618

Жыл бұрын

If you want to live, know how to spin. This is such a saying. Guys are definitely great!

@gregjones3660

Жыл бұрын

This is West Texas one year after Biden “took” office…

@1202burton

Жыл бұрын

This wasn't a rebuild, it was a repair. Only 1 or 2 balls of the bearing were destroyed, it's always the top bearing to go first as it's the 1 affected because of low oil ie; leaky transmission gasket caused this problem. And by the looks of it, it will more than likely fail again for the same reason. I build these every day, it doesn't take 4 weeks, 2 to 3 days at most and that is waiting on NEW parts, the actual labor to replace input bearing is 11 hours to remove trans, inspect trans, clean and reassemble and reinstall. If i had 5 helping me, it could easily be done in 2-3 hours. And you would get a warranty. 5 years /50,000 miles parts and labor on a rebuild, 10 year/100k on a new replacement. To all that commented " no need for all those fancy tools, lol, those fancy tools get it done right, bearing pullers and bearing installers are not a gimmick, and there are no substitutes, i doubt there is a dial indicator within 100 miles of this place, which is necessary for setting end-play and making sure races are installed right. Cleaning it in that way only makes it look good "kinda" i guarantee if i cleaned that same trans after they reassembled it, the magnet in my steamer would have at least half a teaspoon of fine metal shavings stuck to it. These guys are working with what they have"which is not much" but still the scraping of machined gasket surfaces with a knife leaving multiple scratch grooves "leak makers" hence the use of silicone as they ruined the machined gasket surfaces no torque wrench an not using a torque sequence and beating on bearings and bearing races with hardened steel is a big no no. We have a saying here, if you think an using a expert is expensive, wait until you use an amateur.

МУЖИКИ, с большой буквы!!! Просто . молодцы ребята!!! Здоровья ВАМ и ВАШИМ семьям!!!

@user-pr3il4ot2e

Жыл бұрын

И водителю, который на этом поедет😂😂😂

Good job, but you have to show to us what spare parts are to be replaced. Bravo

With all the extra parts that will be leftover they'll cast a whole new transmission.

I still love watching you guys work!! This is my morning coffee

@theawesomeskills63

Жыл бұрын

Ahh😍thank u so much 🥀

Amazing their tool box is neater than mine

What is average or guess on price to fix there? Amazing work

Такое ощущение, как будто в Индии всё делается на коленке, буквально всё...

@theawesomeskills63

Жыл бұрын

It's not India,it's Pakistan Thanks for commenting on my video visit again on my channel for more interesting video's 🥰 love from Pakistan ♥️

@alexeyfadieiev4070

Жыл бұрын

@@theawesomeskills63 Thank you for clarifying :)

@theawesomeskills63

Жыл бұрын

@@alexeyfadieiev4070 most welcome 🤗♥️

Son chingones esos mecanicos, aqui en mexico valen ver...son sirven para cobrar y muy caro y no arreglan nada....

welignton ,david e filipe ,são os entendidos mesmo!

I can’t believe they did all that work n didnt replace the clutch brake shoes 😂

@FrostiTheRoadman

Жыл бұрын

That's what got me too 🤣

@martinswiney2192

Жыл бұрын

Brakes? We dont need no stinkin brakes!

@mvcybron

Жыл бұрын

That’s 2 extra dollars to spend. That’s like a years worth of salary for the child labours in pakistan.

@mikeodonnell3492

Жыл бұрын

But that's not the actual clutch in the back. I was wondering what the function of that was.

@martinswiney2192

Жыл бұрын

@@mvcybron children make great wheel chocks

Your guys are a genius god protected your all my brothers🙏🙏🙏👍👍👍

@theawesomeskills63

Жыл бұрын

♥️

2 quarts of dirt inside the rebuild transmission but good job

Great video, but after all that work they didn't even show them installing it back into the truck. The best part would have been the truck driving off with its new rebuilt transmission.

são bons mecânicos mas só falta uma máquina pra soltar os parafusos mais rápidos

I like the way these guys work They work together! As a team.

@theawesomeskills63

Жыл бұрын

🥀

It's those brilliant blokes in flip flop again.

👍대단합니다 korea

THESE GUY'S NEED TO BE GIVEN A CHANCE TO WORK WITH A FORMULA 1 TEAM...👍

@stevenhird1837

Жыл бұрын

😂😂😂😂

Thats how i used to wash parts in the solvent tank in the shipyards , no gloves , come to learn it was very toxic , goes to internal organs. My buddy worked in the prop shop , doing prop repairs , they used bondo to fill all the imperfections and he would grind away no mask on , he died of cancer , very young.

Step one: Find sandy or dusty environment to perform repair.

You get broken transmissions because they load their trucks up over weight ,but very skilled crew in repairs well done,though the repair area is a bit basic old jimmy Aust

I Love Pakistan Long live Pakistan mechanics

@theawesomeskills63

Жыл бұрын

❤️

Very good job ,amazing skills.

Hard working people always find a way!

They need to many tools here USA you special tools 😜

Как я понял замена подшипника первичного вала, много ручной работы голыми руками, подозреваю это бригада по ремонту кпп.

@theawesomeskills63

Жыл бұрын

Yes, you are right it's team work.

@theawesomeskills63

Жыл бұрын

Thanks for coming on my video, 😍 must visit again for more interesting videos 🥰🥰

very resourceful!!

Песок перемелется в шестернях и получится силикатная наносмазка. Не понятно что там в этой коробке сломалось. Предыдущие ремонтёры просто так же подшипник забивали ну и откололи кусочек обоймы.

@LoneWolf-tx3pj

Жыл бұрын

Подшипник вала из строя вышел а именно их там целых двух не было 🤣🤣🤣

@waprobin

Жыл бұрын

@@LoneWolf-tx3pj ну вообщет все шарики были на месте, там отсутствовал разделитель этих шариков, который равномерно их распределял по подшипнику.

@LoneWolf-tx3pj

Жыл бұрын

@@waprobin во Я ло@ этого не заметил я

@user-tr6uk7ru5y

Жыл бұрын

Разделитель шариков называется сепаратор.

The original Pep Boys....lol. There does seem to be a shortage of ratchet handles, air guns, and bearing presses. Amazing work though.

2000 años de cultura los contemplan, ¿Estados Unidos?

Internet- yes, we have. 4K cameras - also, computers - a lot of. Work table??? Yyyy, eeee.... Mohamed, what is a work table???

My best friend, that's a great video. I will always cheer for you in Korea I'm looking forward to a great video. Have a nice day.

@tavarattonchinda4620

Жыл бұрын

เก่ง และรวดเร็ว ทีมงานเยี่ยม จร้าาาาา

Очен интересное видео, но нам интересно сколько будет стоить цены на эти работы у вас, мы хотим сравнить, пишите в долларах

Палец - самый лучший толщиномер при нанесении герметика!😁😁😁

@user-uj5pm2xq3w

Жыл бұрын

И шпатель

@giorgiobassi9078

Жыл бұрын

Vero. 👍👍👍👍👍👍💯💥😎😁🇮🇹

Збс он вторичный вал разпрессовал😁

Пит-стоп, до следующей мастерской как раз доехать хватит...

thank you for video pls tell us which country are you and which city thankyou

@theawesomeskills63

Жыл бұрын

Pakistan❤️ ,Punjab

Não importa se são bons em montar e desmontar....cadê a limpeza...estão lidando com peças de precisão...nunca vi tamanho relaxamento.

I kind of wish I could live and work here, just so I can actually be around individuals who can and will work. Sooo much more respect for these fellers, than those murican poons.

So what happened to the missing ball bearing? Did it disintegrate or was rattling around somewhere in the engine? (I Don't know anything about engines)

@lindardrel1940

Жыл бұрын

When they strip the transmission you can see it at the bottom of the case

Were any of the gears replaced. I noticed a few gears with wear.

3к подписчиков и 500к просмотров))