Just the series I've been waiting for! Lots of content on KZread covering this and that related to 12V's, but not an in depth start to finish rebuild. My request as you progress is: keep the information coming, try not to skip steps or gloss over explanations as so many do. I get it, you cant go over EVERY detail, but know that I for one really appreciate all the information I can get. I've got the garage, the tools and the ambition... your series will help boost my confidence and tackle my 97 12V that has so much blow-by I feel like I've got 2 exhaust pipes! lol. Subscribed.

@CUTTERUPROB

3 жыл бұрын

This is what I hoping for. Non is this is hard. Just need the info. Thanks for watching

Loving this series. I just removed my 12 valve from my 92 W250 and Its ready for the rebuild. I have the tools and the ambition, I just hope that I dont screw it up haha

You have the most informative Cummins content I have ever seen on KZread. Thanks for posting this series

@CUTTERUPROB

2 жыл бұрын

thanks, if you would mind please share let everyone know

Rob, you have done this a time or two.. Great to see a man that knows what he is doing...

Thank you for doing this series!

@CUTTERUPROB

3 жыл бұрын

no problem hoping it helps a bunch of guys out,

Yes saw it on Facebook, glad you decided to do it!

@CUTTERUPROB

3 жыл бұрын

Thanks for coming over. Ya hopefully it will help a bunch of guys

Time lapse music made me want to go to a disco, well done thank you.

@CUTTERUPROB

3 жыл бұрын

thanks lol

Here from 5.9 page on Facebook. Nice work

@CUTTERUPROB

3 жыл бұрын

Thanks

Tha ks for taking the time to make all the content you put out, its been great. I have a 12 valve thas going to have to come apart, probably next summer. But this will be a good guide. Thanks again.

@CUTTERUPROB

3 жыл бұрын

Glad the video’s are helpful

man subscribers are growing like wild fire lol i was one of your first keep up the awsome content

@CUTTERUPROB

3 жыл бұрын

Working on it. I appreciate all of the subs. I want to channel to grow to help and let me give back

@Thedave2224

3 жыл бұрын

Yeah i started posting a few videos of my own to

Great info rob. Thanks for sharing your knowledge. It'll come in handy in the not to distant future.

@CUTTERUPROB

3 жыл бұрын

🙏

Excellent explanation 👌 🎉

Yes..thank you for taking time and making this videos for us!! I have a 97 reg cab 12 valve 4x4

@CUTTERUPROB

3 жыл бұрын

I am glad people are watching. Sweet if you have IG tag me in a post

@white24valve

3 жыл бұрын

@@CUTTERUPROB I dont think I do..maybe my daughters have me signed up on Insta ...haha

Here from Facebook, subbed!!!!

@CUTTERUPROB

3 жыл бұрын

Thanks

TAKE PICTURES AS YOU DO TEARDOWN! always helps! great videos

@CUTTERUPROB

2 жыл бұрын

Yep that’s a great idea too

Thanks for these videos bro. I'm in the process off rebuilding my 97 12v as well. Cam retainer bolts backed out and broke the cam gear and cam retainer. Think kdp had a part to play too because it ain't in its hole lol. Bent my push rods pretty sure that my valves are bent but haven't pulled them out the head. Keep the series going man they are greatly appreciated man

@CUTTERUPROB

3 жыл бұрын

Ya sucks when that happens. Thanks for watching!

Thanks for sharing, great info

@CUTTERUPROB

2 жыл бұрын

Thanks for watching!

Nice

@CUTTERUPROB

3 жыл бұрын

Thanks for watching

Hey Rob Quick question regarding the parts washer, what would be the best way to clean the block, head, cam, etc in case you don’t have the big washer available? Thanks man once again for your time and for sharing your knowledge! Best on KZread, hands down!!!

@CUTTERUPROB

3 жыл бұрын

thanks for watching. power washer works. diesel and brush works. lot of different

great video we,put a 6.7 on a 06 runs bad at low idle do we need to swap inlectors that makes no sence to me. thanks for any advice

@CUTTERUPROB

9 ай бұрын

if your running the 06 injector it wold run bad , spray angle is wrong

Great tutorial videos....How'd the turbo look?I'm just wondering if it had something to do with the damage. I am leaning more towards a fuel issue though.....I'm looking at the whole series now....thanks.

@CUTTERUPROB

Жыл бұрын

Turbo from that engine was right full on metal. That injector had a crack in the nozzle

Rob, appreciate the minty walkthroughs! With 3200 rpm spring on 60lb springs, are there any further precautions to take aside from better oil as you said? This is for a non i/c 90 5.9 w250. I’m doing a full rebuild with 155 bowls 150hp injectors, BW 362sxe, arp studs, and ve rebuild.

@CUTTERUPROB

Жыл бұрын

Oil temp is a big thing to watch.

Where exactly are you in Canada ? I'm in BC and would love for you to take a look at my Fummins have a bit of a problem with power. I can't figure it out.

Can you tell me what the 2 bolt bracket in the timing cover below the water pump is for? Thanks for sharing these videos! Liked and subscribed! From Connecticut 👍

@CUTTERUPROB

3 жыл бұрын

The two studs ? If so there for the crank sensor

@roofer4kidz913

3 жыл бұрын

Yup that’s the bracket on the studs...would a 95 12valve 5speed have that sensor? Thanks!

@CUTTERUPROB

3 жыл бұрын

@@roofer4kidz913 no problem

Hey Rob, what’s that engine stand your using?

@CUTTERUPROB

9 ай бұрын

The yellow one is just a 2000lbs one

This one doesn't have that large round cylinder on it for the coolent?

@CUTTERUPROB

2 жыл бұрын

What we talking about here

My 6th injector got stuck inside and when pulling only the top half came off. that being said the bottom is left to be stuck inside and will not come up would i have to tear it down the to head or is there a way of getting it out ? 93/5.9

@CUTTERUPROB

3 жыл бұрын

Pretty hard to get them out when they do that. Likely will have to pull the head off

Sir how to check blowby?

@CUTTERUPROB

Жыл бұрын

I will have to do a video

So what's your preference a 12valve or a 24valve Cummins

@CUTTERUPROB

Жыл бұрын

Depends on what your doing

How much would you charge to rebuild one that threw a bearing?

@CUTTERUPROB

7 ай бұрын

Hard to tell you with out having it apart for a inspection

What would be the best/easiest cummins swap for a gmc? I'd like a 6.7 but don't that will be a easy as a p pump 12v

@CUTTERUPROB

2 жыл бұрын

At this point they’re all pretty easy. Just the commonrail will cost more as there is wiring and programming needed

@petervanguilder6276

2 жыл бұрын

@@CUTTERUPROB can it be ran on a p pump so I can run black diesel?

@CUTTERUPROB

2 жыл бұрын

@@petervanguilder6276 yep sure can. But at that point way cheaper to run a 12v

@petervanguilder6276

2 жыл бұрын

@@CUTTERUPROB no benefits to having the 6.7 converted over?

@CUTTERUPROB

2 жыл бұрын

@@petervanguilder6276 there is but the extra money unless you really want one doesn’t make sense

Thanks! Starting my first rebuild. Shoot me your address and I’ll send you a case of PB Blaster lol

Would rather listen to you working with some commentary then that horrible sound you call music

@CUTTERUPROB

3 жыл бұрын

working on doing some better for the time lapse parts. my editing software is limited.

@CUTTERUPROB

3 жыл бұрын

I just put up part 2 with commentary let me know what you think