Never pulled a trans in my life I'm 16 all I did was watch this video and did every step he said and I did a trans swap lol really easy

@josearcos6115

6 жыл бұрын

Gavin Hughes ww

@bleepinjeep

6 жыл бұрын

Awesome! That's great to hear

@coachd6100

6 жыл бұрын

Gavin Hughes That's awesome! Good job! It says a lot about your capability and @bleepinjeep, that says a great deal for your video, too.

@joshuareaper2082

6 жыл бұрын

MUCKFOOT I need to change mine trinb to find out how the torque converter clocks any help ?

@wildbill23c

5 жыл бұрын

Not that hard, just lots of wrenching and trying to get old crusty bolts lose having dirt falling in your face and trying not to drop everything on top of yourself once you get the bolts out LOL.

Thanks, you are making it easy for a 75 year old. Appreciate you sharing your knowledge.

@dandahermitseals5582

Жыл бұрын

I'm 80 and just got tireder watching. And that's one of the older " simpler???";Machines?? Ta hell with these rolling computers. Dandahermit.

Tyler is the go-to man for how-to videos, this is great man. And a helpful cat

@tylerbleepinjeep606

8 жыл бұрын

Thanks Mike!

I wish you were my neighbor!! Just watched you incredible video again for the 5th time. Today is 23FEB2023. My project has taken a long time.

@twoninecav

Жыл бұрын

Question 🙋🏽‍♂️; Can I put a Chevy 250 inline, in my 2001 XJ?

Man you know what you're doin. And have waaay more patience than me. Dandahermit

Probably the best DIY video I've seen on utube. Great and extremely thorough.

Gotta say Wow, what a great video. The way you show the "big picture" and then go under the jeep for the details shots is perfect! I've just got to replace my flexplate and this makes it look like an afternoon job (unless I run in to some "homeskillet" issues, but I've been under there a bit already since I got it and have run in to most of them). I feel for you with that crossmember deal, wow.

thanx for straightforwardness and decent lighting of the video

Your video made my life a lot easyier, especially the e-12 socket I didn't know about. Thank you. Kevin, Evans City. Pa.

PERFECT! Thanks man. Good job, as always. I'm no longer dreading pulling my trans now.

Great instruction video, probably the best I've ever seen.

Very helpful! Doing a manual swap and wanted to make sure I had all of my bases covered

Another great video! This one really motivated me to finally get that flexplate replaced. Thanks!

This is the bleepin jeep I like! Nice job.

Great idea to make a floor jack into a transmission jack !! I've got a piece of metal ready to attach to my floor jack. Thanks yet again for a tip that will save me serious heart ache !!!!

"whatever home skillet" omg classic ! and btw great video !!!!!!

Thank you for your efforts... Excellent show..!!

Kudos to you! Great vid, lots of hard work to make these, I really appreciate your efforts!

@bleepinjeep

6 жыл бұрын

Thank you!

Awesome video, nice to see it from two views, outside the jeep and inside. You should do a video on a transmission rebuild!

Great video. Love the detail! Two thumbs up!

This was a great video for me, I have a seal on the input shaft that is bad and needed an idea of how hard / easy it was going to be to replace!!! Bleepin Jeep ROCKS!!!

@bleepinjeep

7 жыл бұрын

+Glen Jones thanks bro!

@protious

7 жыл бұрын

now I have to just get the time to work on the seal! any suggestions? keep up the great videos!

I like how you did this.

Excellent video.

Great video

Great video, thanks for the instructions I really appreciate it!

@percypelt3145

3 жыл бұрын

]]]]

Great job on the video

Great vid only thing i needed to pull my transmission

Nice vid man!!

Perfect video.... Thank You....

Great video!!

Awesome video thank you

unbelievable...thank you

I tried to hit the like button more than once but I forgot I already have lol thats good quality video

Pretty helpful but as someone who pulled and reinstalled the transmission three times this weeks I have to say it is soo much easier to remove the trade first

Excellent video, thank you. Gonna need it this weekend to replace my torque converter seal that busted and left me stranded on the trail 😡

Great video, Thanks!

@bleepinjeep

6 жыл бұрын

Your welcome, thank you!

Muy bien amigazo te felicito y te agradesco por compartir tu video super didactico , saludos desde MEXICO

Fantastic timing with this video Tyler. My AW4 is having a lot of trouble and will need rebuild soon. Any plans to do a series of videos on how to rebuild it? I plan to buy a spare and save my rebuild for a rainy day.

@tylerbleepinjeep606

8 жыл бұрын

I might do an AW4 rebuild video some day, but it'll be a while down the road. It's not an easy job and making the video is VERY process intensive. Not saying it wont happen, but it'll be a while before I can devote the time to it.

Thanks for the video. Very helpful. Two questions: I’m pulling the motor from my 99 xj 4.0, 4wd. 1. Can I pull the motor, trans and transfer case as one unit with my bumper and header panel off? And 2. When reinstalling trans do I have to align the torque converter and flex plate in a certain way (indexed) or should I just make sure all the bolts line up and bolt them up together? Just wondering if I’ll have a imbalance issue if I don’t index it with alignment marks I can make before I pull them apart. Thanks.

orange kitty judging by how he rubbed on it thats not your trans thats the cats now

@tylerbleepinjeep606

8 жыл бұрын

Ya, you should see what he's done to my chair in the shop. Friggin cat...

lol good luck with the dipstick tube.....had to cut mine and order a new one

Perfect video. Thanks so much My issue is the seal behind the converter. Can you make a video on how to change the seal(s) ?

@gordonlowe9400

3 жыл бұрын

Yes Good Idea!

Ty for the video. Do you need the kick-down (TV) cable from the AW4 trans. for an AX 15 on a 1998 Jeep XJ?

Your partner in the video is pretty helpful 😜

this video really helped but what year is the XJ in this video was just curious because im pulling out a 95 xj transmission

Great helpful vid! I'm gonna be doing mine one day hopefully not soon and this'll help big time!

I'm in the middle of an engine swap. I left my TC on for the past few days. I wasn't aware it could damage the seal. I just went out and removed it.

Hey Tyler, I have question. I have a jk with a trans cooler line leaking at cloth covered hose. Can I cut the trans cooler line and replace with rubber hose and clamps. ? is is there alot of pressure in that line. thx for your help.

I've been having trouble with my transmission in my 91 Cherokee, things like I would have problems getting it to go faster than 25 miles per hour would a transmission swap possibly solve this problem, or could I be able to get away with rebuilding the original transmission?

hello i changed my torque converter on my jeep and put it all back together didn't any gaskets. When i went to put trans fluid in it would spill out the bottom of the bell housing. Any ideas of what it could be? gaskets maybe?

i have 2014 jeep grand how much trans mission oil in the pan it take like 16 quats and whats the thing way of doing this,,i like ur video by the way

I have a WJ 4x4 with 4.0. I need to replace my flex plate. Do I have to undue the hooked the wires if I just want to use a transmission jack to pull the trans back a little to get access to the flex plate?

hey tyler, I had a question, and since you have....well, a lot of jeeps to reference, I figured you might know. I'm swapping out my 242 transfer case to a 231 with an SYE. and one of the electrical connectors (not the speedo, but the one that goes into the housing) has a different fitting with the two t-cases. of course I didn't think to get the connector while I was at the junkyard, but it looks to be only a 6" extension from the main wire harness to the t-case (and the actual fitting that goes into the t-case is a different style and size). my question is, is the fitting uniform throughout the model t-cases (meaning could I just go pull it from another 231)? or does it matter the year of the XJ as well as style of t-case? I hope my question made sense enough for you, lol. thanks

thought would ask you because don't see anything on tube or FB. got a 99 Laredo. looking underneath I see the mounting trans brace is missing or disconnected. I see the one brace that mounts onto the driver side of the pan but don't see the other 2 mounting bars. if you have a pic of these connected and where they mount to , would be great. found a 3 part set on ebay for like $30. Guess I need to find a Jeep around here to look at.

im trying to put the toruqe converter back in i need measure ments to the bell housing? the 4 bolts holes are flush i think im not in yet cause i turn pull it out and the pump notches didnt turn

So, my jeep just started pissing trans fluid from between the trans and the engine block. I assume it's the front seal in the transmission? How hard is that to change?

Awesome video!! could you make a video about what you prefer AW4 or AX15 and why? I have a 4.0 donor cherokee sport that I am going to swap into my 2.5L TJ i got the cherokee for free cant beat that!! its crashed on the passenger side not road worthy so I am going to use it to beef up my TJ and make it more capable. my tj has the ax5 and I love driving manual and always enjoy just that feeling of fully driving the vehicle. So I wanted to go with a ax15 but some people tell me to stick to the AW4 because its tougher. Just thought this would be a great idea for a video for you to make if your interested :) thanks!

On my 99 xj 4.0. Will the torque converter only go on the flex plate one way? I aligned all 3 bolts and torqued them bit when I did the first one I as I was tightening the bolt it sounded like the converter jumped out a notch. I’m hoping I did not misalign anything but don’t see how. Before I bolted the trans to the engine I wobbled the torque converter on until it clicked into place three times.

give the cat attention god damn it

@peterruppert7856

4 жыл бұрын

lmao!

Hey, I got a 1995 jeep Cherokee Sport 4x4 straight 6 4.9L and it has an issue with the automatic transmission, It goes into 1 and second fine, but it catches third then slips out, what could that be and would it be worth fixing or going out and buying a used transmission?

thanks

So it looks like to get the tranny n transfer you need to disassemble everything from the vehicle to gain access. I think if I was still a mechanic with a work order to replace the tranny output shaft seal would be the day I'd retire. If it was mine I'd just sell it n buy a manual rig.

Thx for sharing. In rea how long did it take you??

Thanks for this video. My dumbass dropped the cps bolt in the inspection hole. Twice. Yes twice haha.. pulled it out/back step by step with this video. Cover that damn hole if your working in that area. Word of advice.

I have a 2002 jeep grand Cherokee With a 4.7 will that set up be similar?

good day can a xj trans work on a chevy 350 v8 engine

Hi Tyler, how can the front oil pump seal go bad when leaving the torque converter hanging? It is basically resting (hanging) on the shaft which hardly touches the seal because the shaft is setting on bearings. I found that my front oil pump seal was fine while the torque converter was hanging on the tranny for almost 2 years. I did however change the seal just because I was in there and I didn't know how old the existing one had been in there. I just wanted you to enighten me because I though that was an important piece of information you passed on to us. Thank you, again for this awesome video.

@bleepinjeep

6 жыл бұрын

I think it's dependent on transmission design, but as a general rule, you should always remove the TC for this reason. It's something I read in my ASE test prep text book, so I figured it's important to pass on.

lol that cute cat is distracting lol but now i know how to take down the transmission thanks

If I need to drop the transmission but not the transfer case, is it worth it to unbolt the transfer case and leave it in versus dropping it all as a unit?

Need to ask tho is there a ground cable attached to tranny? I have AW4 with what looks like a ground cable just hanging. Goes nowhere but seems to be coming from top of transmission?

Help I'm from New Zealand and scored my first Jeep been a long time fan & always wanted a Bush Basher but preferbly from the Mopar stable as I'm a Mopar nut although they technically AMC will Was, Anyway scored a Cheap 96 Cherokee as they are plentiful down here (six cly) with no gearbox (Auto) But also scored a 96 -98 Wrangler smashed and written off But has a Good Auto & Motor (six Cyl) Do the Wrangler & Cherokee share the same box? I'm pretty sure they would be I cant see why they wouldn't be different maybe linkages will be different but box should be the same? But I noticed in your video your Auto is different to mine I just pulled mine out of the Wrangler today and being a mopar nut the main body looks like the Good Old 904 Torque flite but with a transfer case bolted to the back of it so did models change around 1997-98? to a newer and improved box?

Does rebuilt transmission come with the torque converter

Great video. I will be pulling an AW4 soon. Where was it leaking from? Was it the side ports for the cooler?

@tylerbleepinjeep606

8 жыл бұрын

It was leaking out of the dipstick tube where it separates. If I had drained the tranny prior, it wouldn't have been an issue. Sometimes I make the most rookie mistakes.

@TheGilbertsonfamily

8 жыл бұрын

+Tyler Bleepinjeep thanks. Such an excellent reference video.

So is it easier to pull a 4.0 engine without the transmission/Tcase or with the Transmission/Tcase? I have to put in a new engine next week and I'm not sure which is easier. Pull the engine with the transmission and disconnect them outside or disconnect the engine from the transmission THEN pull the engine. The transmission is staying on the jeep zj just swapping the engine.

Harbor Freight angle grinder for the win!

@tylerbleepinjeep606

8 жыл бұрын

BOOOYAH!!

Did it and a month after I did my motor

Do those trany give out or problematic? Always have owned standard both the xj Cherokee & TJ wrangler with 4.0 but 5 speed have no experience with auto but daughter is wanting to drive & got a 98 XJ project that is auto

How many bolts to drop the trans and motor and t.case as one?

do you know if the transfer case is interchangeable between the AW4 and the AX15 of the same year? looking at changing mine. Great Video!

@tylerbleepinjeep606

8 жыл бұрын

I believe it's cross compatible. As far as I know, they all use the same input spline count. I'll be able to tell you for sure shortly, when I pull the transfercase off the AX15 that's going in Project Tetanus.

@FernandoDenise2558

8 жыл бұрын

Commenting to get notified

I'm a little new to Jeeps but I'm doing a transmission swap from a 96 into a 89 Cherokee to get the newer 5 speed so I took the flywheel off the 96 and put it on the 89 would that cause the crank positioning sensor to read it wrong because they are different flywheels thus making the Jeep not start (it dose crank) and is there an easy fix or do I need to pull the transmission and put the old flywheel back in or could I possibly just swap computers?

I was driving down the road going about 45 and my rear driveshaft got loose from the transfer case no big deal, just a few nuts and bolts, but once I looked at it in depth I saw a huge piece of bell housing missing from the starter area, anybody have an idea of what happen there? Fly wheel disconnected from the torque converter and smashes up the bell housing? Would greatly apprecaite any type of thoughts or opinions

Little Donnie for president

Imagine the flywheel and the TC only being held together by those 4 puny bolts. All that force, in 4 bolts. Sometimes you wonder how it all holds up. Engineering I guess

I pulled my transmission today, and the hardest part by far was separating that damn dipstick tube. I still haven't gotten it out, actually, and I can't get the transmission out from under the vehicle until that tube is off. It's pretty annoying.

That wood Jig for the jack does not work on the manual transmission(AX15) , because the AX15 does have a flat bottom..but if somebody has a wood patter or jig that accommodates to the AX15 shape it will be appreciated ..regards the AX15 juggler...O yeah I almost forgot Nice Video.

@tylerbleepinjeep606

8 жыл бұрын

Thanks Baja! I'm not sure what you're referring to on the flat bottom of the AX15, but I used it to pull an AX15 the next day and it worked fine for me. The AX15 can roll on you a little easier than the AW4 because it's not as flat on the bottom. Maybe that's what you meant? It still works, you just need to keep a close eye on it.

I had to replace the trans in my jeep (ZJ) 3 times. I know the headaches, That 42RE cant handle the size of a ZJ, but its fine for XJ's and the like sized/weight jeep. Couldn't find a beefier Trans, so I replaced it with 4L60. havn't had a issue since. On a side note, if I know this video was being uploaded, I would have asked very nicely if since you were right there at the bell housing, could I get that starter? lol, mine crapped out on me a couple of days ago. lol, all and all, great video.

@tylerbleepinjeep606

8 жыл бұрын

Sorry bro, I need the starter for Tetanus :)

@dracosdiabolis1769

8 жыл бұрын

+Tyler Bleepinjeep it's ok, I was just bustin' your chops a little. I'll be picking one up tommerow.

@xxRamD3yruxx

8 жыл бұрын

its called a band adjustment and torqueflites need em, zj's had tfod-a500 and xj's had aw4's from aisin warner

Does anything differ if it’s Manual?

Is it similar on WJs?

Bleepin cat

Will a 95 trans work in a 98 99

How can i change the flywheel only its sound like break, exctly un the transmisión a waiting answer thanks

@bleepinjeep

6 жыл бұрын

remove the transmission... replace the flywheel

Great video but I'd pull the torque converter bolts first. Pet that damn cat though he's dying for attention

With a red wrench and anger!

Really could have used this a week ago haha

kitteh!

I'm cringing to see the body and bulk of the weight held up at those jack stand locations...where it appears a tube was welded in short bursts to lower the transfer case crossmember and reduce vibes/driveshaft angles. Glad nothing shifted on ya.

14:26 😂😂

make more operation tecnus videos

Seems like my manual clutch job is going to be a lot simpler than messing with all that.

is this AW4 type?

@bleepinjeep

6 жыл бұрын

yes