Im sitting here with all the basic tools and this man just keeps pulling out tools from the woodworks lol

@Oaxmex346

3 жыл бұрын

😂😂😂

@crush9197

2 жыл бұрын

I had to spend 571$ on tools just to do the job because no mechanic wanted to do it for me😡

@Deafgamer-b1q

Жыл бұрын

@@crush9197 if you become friend's with a mechanic he'll probably ask you to pay him a small fee to do it, no mechanic will do it cause they don't want to be blamed for an accident that accured on your car thats why

I’ve had my wheel spacers on my car for over two years now and they’re still holding up great... This is literally the only video I would recommend for ppl.

@jaredharrell5751

2 жыл бұрын

how often do you have to re torque them and how big were the spacers?

@marshalkwt

2 жыл бұрын

@@jaredharrell5751 re torque every 5000 miles

great video..finally a before and after demonstration

@brionbraziel7968

3 жыл бұрын

Absolutely goddamn right, no unnecessary talking and opinions, just straight down to the point...

This is literally one of the best car videos out there. I wish I saw everyone with car videos explain clearly, be well spoken, and be very informative like you

@milanmastracci

Жыл бұрын

Thanks Bryant! Happy to hear you enjoyed it

you also need to re-torque them after a day or around 100 miles of driving after installing wheel spacers or whenever you change a tire.

@h3ll0_2

4 жыл бұрын

Seems like too much work for me. I'll stick with standard.

@jenssenvaldez3051

4 жыл бұрын

or use red/blue loctite

@increase9896

4 жыл бұрын

I know this comment was a long time ago but I have a question: Do you have to re-torque just the spacers onto the car, the wheel onto the spacers or both wheel and spacers?

@sluggs007

4 жыл бұрын

@@increase9896 well, since you have to take the wheels off to get to the spacers........lol

@thomasleete864

3 жыл бұрын

@@increase9896 Both wheel and spacers. if you don't torque one of them they will fall off during driving and that is a very expensive mistake

This was a really well done video. I was expecting you to babble on for 20 minutes like most diy KZreadrs. Thanks!

Great video. Well spoken, well shot and to the point. Thank you.

Nice vid, right to the point and the before and after comparisons were really helpful. Looks much nicer.

Very helpful and well produced, so thanks for posting.

dude thank you for all your information you are helping me out so much and it ain't even funny

Man, really good video, didn't think about using that no corrosion brake coating. Really good information, keep up the good work man! :D

Excellent, perfect video. Seriously. Thank you

LOOKS A LOT BETTER!!! (before and after)

Thanks for the video. I'm getting these kind of spacers.

Great video! Great info and well presented. Subscribed!

Glad you did the hub centric spacers.

You did a great job on the video. Great suggestion on the anti-seize. It may not be necessary for everyone but it's not bad to suggest one might benefit from it.

VERY GOOD PRACTICAL AND INFORMATIVE. KEEP IT UP.

Great Video man...THANKS!

Cooool... Exactly what I was looking for ;)

Great video! Im about to order some but before i do , do i measure my new off set rims or my original hubs? You should make a video of how to measure spacers

Excellent video Milan! BTW aluminium doesn't corrode the way you think it does. The corrosion is called aluminium oxide which turns to a really hard layer (surface). That hard layer actually protects the aluminium from further corrosion. Not saying the added insurance isn't necessary because I would do the same thing your doing.

Nice video, I like the copper grease idea. I'm going to try that.

@lindvallpaul9861

3 жыл бұрын

was it good ?

Perfect tutorial . Well done :) Gold star bro ⭐️ Thank you

can't believe how far in the wheels sit standard! looks terrible! much better with the spacers.

@The_Noticer.

3 жыл бұрын

I think it's because they don't want the track to be wider than x-amount. But make the car bigger nontheless. Had the same on my Honda Accord CU1.

Love this video. Keep it up bro. 👍🏻

Awesome video good explanation and great ending

You're videos are the best man! i've probably seen all of them in these past like 2 weeks and I've done a lot to my car this week thanks to you! I was wondering if you can possible post a video on how to add the sound deadening to a car and how to take off different panels of a car, how to change lights to some aftermarket ones, more stuff under the hood like changing the headers of your engine. Haha you made me want to do so much! Can't wait for future videos! See ya later!

@milanmastracci

8 жыл бұрын

+JoshJimenez64 Funny you mention that :) Take a guess what the next video coming out is lol

Damn great video I subscribed

Dude I saw your video on your awning like yesterday haha and here I am again

Good vid! You have me sold!

I run blue lock tight too on the studs both spacer and hub ... I’ve had mine come loose from vibration

you did a very good job..nice vid..!

Very well made video...keep it up

Great video man!!!

@milanmastracci

8 жыл бұрын

+GT-Rrrrrrr THanks man!!

Good informative video. Thanks, man.

@milanmastracci

8 жыл бұрын

+4dangler Cheers buddy :)

Your car looks a lot better now!

Dude, your blinker fluid is so low..

@Tr33Tr331

8 жыл бұрын

😅😅😅

@mr17fyve

7 жыл бұрын

god damn it gavin

@itsjustatapbrohhh7779

7 жыл бұрын

Erblin Kurtishi what blinkers need fluid fuck havnt did mine in years

@MrBury74

7 жыл бұрын

What the hell is a blinker that needs fluid?

@RoninOC

6 жыл бұрын

Erblin Kurtishi just had to buy new piston return springs.. damn shame

That anti sieze aint gonna hurt sheit lol good shit bro

Good vid bro, thanks

great video broski!

@milanmastracci

4 жыл бұрын

Thanks buddy! 👊

nice suv bro，like it

another great video and another mod I want to install. 2016 is going to be killa to my 2012

@milanmastracci

8 жыл бұрын

+MYute87 Thanks man!! :) I wanna see before and after pics!!

Great video and nice car

@jamesmendell6763

6 жыл бұрын

I think so .really helpful to us.Great.

Have a Merry Christmas Milan!

@milanmastracci

8 жыл бұрын

+Tatiana M Thanks Tatiana!!! You too :)

you deserved my like

Dude you totally just helped me with my 3000GT. I've never used spacers before and I was trying to put them on the wheel hub BEFORE the rotor haha. Im such a tard

@milanmastracci

4 жыл бұрын

Its all good Ken! Ensure you use your torque wrench twice, once to install the spacer to the hub, then the wheel to the spacer 👍

GarageLine spacers are really good! Also better IMO because they are paint black.

I've been wondering about the re torque and how that works? Do u wind up having to take off ur tire to re torque the spacer and then 100km later re torque your wheel?

sick bro

it was helpful thanks

hey, i have an 8th gen accord as well, the link for the 38mm spacer isn't working though, could you post up another one?

Quick question if you don't mind? How did you know what size to get to make them flush? I have a 2006 accord trying to do the same. But I'm sure each model and year is different. Thanks for time!

Thank you 👍

Just got these in the mail today. 25mm front and 38mm rear wheel spacers. The link for the 25mm wheel spacers listed are out of stock so I got the same brand as the 38mm link.

@JonsDiary

6 жыл бұрын

chuct23 do you have hfp or stock suspension? Wondering if its gonna rub if lowered

Installing 1.5 in spacers in all 4 corners on my slammed 8th gen accord coupe today much excite

@davec431

4 жыл бұрын

Post a video

@ketchup9187

4 жыл бұрын

@@davec431 i dont have the car anymore bro but they held up great never had issues and even changed wheels a couple times. Make sure u use thread lock medium strength everytime and gently clean threads and everything is seated properly and will ride and function like normal wheels

Great video bud

@milanmastracci

7 жыл бұрын

Thanks buddy :)

@brandonshultz2925

7 жыл бұрын

Arandules

Those spacers come in handy when you habe a bbk and deep dish wheels too.

@milanmastracci

6 жыл бұрын

Yes they do!!

I gotta admit, when I selected your video I saw your face and thought "dayum! What's this young kid gonna be able to tell me?" But, I was very pleasantly surprised. You covered it all from A-Z, mentioned some things I hadn't even thought about and didn't spend all your time stuttering and covering extraneous and non-relevant material. Thanks and kudos to you!

Thank you

anti-seize was the only thing you did wrong, it's the equivalent of spreading some mud between your rotor top hat and rim, you don't want there to be anything between the rim and mounting surface its attached to. if your that worried about corrosion simply clean/paint the rotor and hub assembly. Most people should never have to worry about wheels being seized to the hubs, most people change they're tires ever 3-4 years and as long as you actually wash your car your fine.

@313mikido

8 жыл бұрын

+MechRider89 most people rotate there tires

@jasonobrien2846

6 жыл бұрын

Wrong. I worked with Chrysler engineers. They always said torque and anti seize everything.

@MrNickyDalenz

5 жыл бұрын

They're tires..... they are tires Their tires..... the tires on that persons car. Rotate there tires..... the place where the tires where rotated. Rotate their tires..... rotating the tires that person has on their car.

@TalsmaBRT

5 жыл бұрын

@@jasonobrien2846 Anti seize is for threads not mating surfaces. Maximum clamping forces need clean mating face.

@0hjaa3.06

4 жыл бұрын

@@jasonobrien2846 And they are Americans so... yeah..

Is there any other way to tighten the spacer bolts to the hub by ourselves, or do we need another person to step on the brakes?

I was considering getting spacers for my 8th Gen coupe as well! Now I have a food idea on how to install them if I do end up buying them. Thanks!

@milanmastracci

8 жыл бұрын

+Luqman Baig Not a problem buddy!! :)

@brandonsever2576

8 жыл бұрын

Be sure to get some wider rims to make sure that you're not adding any uneven pressure on your wheel bearings. Wheel spacers alone will put more force on to one side of the bearing than it's designed for, which leads to them wearing down faster and possibly damaging them over bumps.

@crush9197

2 жыл бұрын

@@brandonsever2576 How often do you re torque them?

Question here, plan to buy a new alloy wheels with 8 inch width. But my stock wheel is 7 inches. Do you think it does fit for 185 tire?

what size rotor would I need for a 4 piston caliper? and do the adapters come with the caliper kit?

Hey Milan, i have an 8th gen like yours but mine is hfp so lowered a bit. You think it would rub? Not really concerned about the rear but im scared the front will rub especially while turning. (NOT willing to fender roll or to stretch tires)

Cool suede PUMAs.

What are some of the cons to adding wheel spacers to your vehicle

nice vidio broo

Nice video

@milanmastracci

8 жыл бұрын

+LND Life Thanks :)

Sooooooo much better.

Hi I am big fan! Question: are wheel spacers safe? Do they hurt the car?? Will the wheel roll off?

Wow that looks so much better, especially with the car lowered. They leave so much space for the wheel for some reason.

@milanmastracci

8 жыл бұрын

+Ahmed Haggag Yeah it makes a huge difference!!

@ahmedahaggag

8 жыл бұрын

excuse my dumb question but is it going to effect the ride in terms of how the suspension works or is that all the same?

@milanmastracci

8 жыл бұрын

Nope. All should stay the same. The springs are going to react the same way, and your car is going to ride pretty close to how it was, the only difference is that because you have a wider track, when you turn, you will get a bit more grip :)

Is it possible to buy bigger hubs, which would have the same results but eliminate the need of a spacer?

Hey I know there have been news around the interwebs about wheel spacers causing more stress to your ball bearings. Is there any truth to this? I'd love to hear your long term review on this man. Thanks

yo bro my car sterring wheel started bubbling alot after installing spacers. i got the wheel alignment and balancing done as well .is there any way to stop wheel bubbbling .

I bought new rims for my car but they rub can The wheel spacers help for the rubbing plz let me know

Do I need to do wheel alignment if ever I put 10mm spacer in the rear?

Put 2” spacers I got vibration on high speed any idea what can I do solve the problem?

After 5 hrs of prying, kicking, and swearing to separate the spacer off the hub. I will ALWAYS apply antiseize. I rotated my tires about a yr ago and live in Colorado. It was absolute hell and was unsure it would come off..

Great job! I think you will need a hub ring, your wheel didn’t sit well on the hub

I drive a 08 Accord coupe will the 25mm work for the rear wheels instead of the 38mm cause they’re out of stock

I want to modify my Celica 1990 modifying body I don't have a problem but I love to know how to modify the suspension? Everything about front wheel I really want to know. Tank you

Cool

Hi I have a 54.1 oem stock bore size , does the bore size on the spacer go to a 73.1 or 72.1 ?

Hi Milan, i wanna know.. : How did you know the right size of spacer you need ? ( 25mm, 30 mm etc ) Bcause in my case, i just put 4 fender flares on my car.. and now my wheel look way to inside.. i need to make all of these pop about 1/2 inches from the fender..

What if existing wheel studs are longer than the spacer? Won’t they protrude?

Do I need anti seize if I’m only using the spacer for the summer ?

thanks bro

@milanmastracci

Жыл бұрын

No problem Will!

any issues with handling due to change in the scrub radius?

Any issues with the spacers thus far??? I want to put 2" spacers on my 2016 accord

Do you have to keep torquing down your spacers periodically ?

You should consider ceramic brake pads to reduce 70% of brake dust

@oh_look_bananas

2 жыл бұрын

I only use asbestos pads.

hi, after installed the wheel spacer do i need wheel alignment?

this works with 25 mm coversion spacers. 4x100 to 4x114.3?

good tutorial, may be quicker to coat the back of your alloy with copper grease instead touching the bolts on the spacer.

help me I'm about to fit 5x120 aluminium bmw wheels to my van that has 5x118 sizes I no I can fit wobble bolts that will be ok but the question I'm asking is can I fit wheel spacers aswell with the above many thanks

My vehicle manufacturer lug nut torque specs is 90 ft/lbs, but my spacer highest recommended spec is 80 ft/lbs. Can I go higher than the spacer's highest specification?

Some body told me to tourque is after 80miles. Do i realy need to tourque again after that 80 miles?

Does these fit a 2009 Acura TSX ?