I appreciate the time and effort you put in here and just wanted to say thank you. After a few initial mistakes I had it figured it out and it worked exactly as you showed.

@Kmcornell23

3 жыл бұрын

Good to hear!

Thank you! Just looked for hours after the information in your video. You are the best 💪🏼

@Kmcornell23

3 жыл бұрын

Glad I could help!

Thanks a million for sorting this out and posting it! I had one of these that wasn't calibrated, your instructions worked perfectly.

@Kmcornell23

3 жыл бұрын

Good to hear! I'm surprised how many people have viewed this video to be honest.

Thanks mate! you helped 1 person here, good job :)

@Kmcornell23

4 жыл бұрын

Glad I could help!

Thank you Kevin for your well explained informative video,,that properly got me out the dark

@Kmcornell23

5 жыл бұрын

Hey no problem. I know how frustrating it can be when something doesn't work and you don't know why.

Thanks for the effort bro. It’s appreciated 👊🏼

I have to say thanx for the info and link do appreciate you taking the time ti help info spot on thanx again

Thanks. Ive been trying to work it out all day.

@Kmcornell23

8 ай бұрын

No problem! It's definitely not explained very well in the instructions. That's made evident with how many views this video has compared to the number of videos I have and how many subscribers. 😂

@michaelreme241

8 ай бұрын

@@Kmcornell23 🤣 I still need to get the reverse going

Ty you helped me as well mine is the same esc but unbranded will go thru and set my points thank you so much man

Thanks a bunch man, worked perfectly, and here I was already waiting for the programming card to come in the mail, now I don't need it lol

@Kmcornell23

5 жыл бұрын

Well at least you were able to program it and I assume drive the car around. Having to wait is lame.... Lol. But once you have the programming card, you'll never want to go back to this method. the programming cards make it so much easier.

I just bought it ...to use @ 2s on 1/10 touring cars like V100 Vaterra, TT01 Tamiya, Sparrowhawk VX Thundertigher... all about 3300 to 4000 KV sensored motors.... Thanks for the instructions....

So helpful. I wrestled with that stupid esc forever till I found this video.

@Kmcornell23

5 жыл бұрын

No problem! That's why I made the video.

Just ordered one of these, and I’m so happy I found your video. Thanks man! Got it for a sensed motor, that’s going into a 1/8th scale crawler? Looking forward to the crawler setting. 👍👊😎🍻

@Kmcornell23

5 жыл бұрын

No problem! Hopefully the sensored setup works for you. I've never ran one myself.

You definitely helped more than one person!

@Kmcornell23

4 жыл бұрын

Apparently so. Lol

saved me a program card. many thanks!

Thanx a lot. It was great help :-)

ohhh! muchas gracias! too helpful, thx from chile...

Know you said that you "don't care", but I "liked" your video anyway!..Main reason, for me at least, was the simple fact that mine didn't come with any type of manual!..Been sit'n on this esc for about 2½ years and just decided to put it in a new build, with no programming card or instruction manual!..Your video was a definite migraine eliminator!..Lol🤣 #MuchAppreciated!..😎👍🏾#GreatPDFdownload!..📲

@Kmcornell23

4 жыл бұрын

Lol. Well I'm glad it helped you.

@DeemoView

4 жыл бұрын

Yessir it did!..😁👍🏾

Thank you so much dude!

Thank YOU Good SIr!! Much Much Appreciated

@Kmcornell23

5 жыл бұрын

Hey, no problem!

Thank you my friend😊👍

Thanks for sharing 👍🏻

I have this optical similar 120a with Hobbyking rebranding but has no set button. But I think I need to change the timing. Der motor gets hot without load when it runs for 1 minute

Thanks Kevin. I am trying to get a TSKY 35A working. It appears to work differently to your 120 unit. The unit does not beep and the instructions provided in your link dont seem to work with this unit. The red/green leds behave differently. Have spent ages trying to get the throttle calibrated. Any ideas please? Thanks alot

Thank You a lot!

@Kmcornell23

4 жыл бұрын

No problem. I'm glad it helped!

Do you have the link for the chart? I just got this esc, will be installing it soon. The description says it has turbo timing, but I didn't see that listed in the chart on your phone. Did the esc seem to have more parameters then the chart?

@Kmcornell23

5 жыл бұрын

Did you download the file that I linked in the description? That has what each beep means. As for turbo timing, I didn't see anything about that but there is a timing option that can be increased or decreased. I assume that's the same thing.

Thank you

I use the tsky 120amp esc it works good look at the label and you can use a hobbywing program card

@Kmcornell23

5 жыл бұрын

Yeah other people online mentioned you could use the programming card. It's just extra money. Lol. But if you change settings often, it may be worth the investment.

Thank you,hoping I can get reverse to work on mine.....

Do you no what to do if you don’t have the little set button beside the on and off switch

@Kmcornell23

4 жыл бұрын

Sorry, no idea then.

THANK. YOU.

@Kmcornell23

5 жыл бұрын

No problem!

Do you find when you have the battery connected the esc gets hot even when it is turned off?

@Kmcornell23

Жыл бұрын

No. The ESC shouldn't get hot if it's off. If it does, there's probably an issue with it. It should only get warm with in use. Even being on and idle it should still stay cool to the touch. If you got it recently, I'd consider sending it back and getting a replacement.

My esc is flash n red then blue. Can you help

Hi Kevin for mine reserve is forward how do I reverse the settings please

@Kmcornell23

2 жыл бұрын

Swap 2 of the motor wires on the ESC or program the controller to flip forward and reverse.

Does the esc survived

Olá amigo tenho algumas duvidas pode me ajudar?

How long did it last I bought my son one waited 2 weeks to get it and it didn't even make it thru a single 2's battery. Never got even warm. Running a 4200kv motor

@Kmcornell23

5 жыл бұрын

Mine is still running. Maybe you got a dud?

@rickyjohnson974

5 жыл бұрын

@@Kmcornell23 maybe or it's geared too high 90/21

I just installed one of these. Fyi it does not like 3s. It has stopped powering the transmitter. Fan still runs tho so I'm not sure what happened

@Kmcornell23

3 жыл бұрын

Yeah I wouldn't recommend 3s unless you have it in a low load application. Putting it in something like a slash would likely burn it up quickly. I'd only recommend this ESC if you only plan on running 2S.

@denilpt6792

3 жыл бұрын

Is replacing the mosfets possible

Anyone know if 4s is a option with this ? says 3s wondered if I could do 4s have a small low kv mtr needs 4s .....???

@Kmcornell23

4 жыл бұрын

No. It's only designed for 3s and to be honest, I'd only recommend 2s. You could probably do 3s on a low kv motor but personally I wouldn't.

@LuisBermudez69

4 жыл бұрын

I just have a 3s and I am afraid for used in 3s?????

@thedonnn01

4 жыл бұрын

@@Kmcornell23 I question if you get lo kv ... the motor has low rpm on 3s and is not pulling much amps ... if I had a higher KV motor I could get at least some speed out of the system .... as such why are you afraid to use 3s?

Good Look how do I connect to a sensored motor

@Kmcornell23

3 жыл бұрын

The same way you'd connect a sensorless motor, you just also have the sensor cable plugged in.

How much volts it can take

@Kmcornell23

3 жыл бұрын

It's rated for 3s (11.1v) but I don't recommend 3s at all. Only run 2s (7.4v) if you want it to last.

@csikilehel9153

3 жыл бұрын

@@Kmcornell23 thx so much

Program card does not work and now I cant get into set mode

@Kmcornell23

4 жыл бұрын

Yeah this was to alleviate using the program card.

Have you had any problems with that esc so far

@Kmcornell23

5 жыл бұрын

No actually. I wouldn't expect amazing quality though. Like if your motor is rated too high, you COULD burn it up. I would just suggest to only use it in 1/10th scale cars and don't gear it too high. As long as you aren't too hard on it, it should be fine. I was already giving thing thing hell in this Rustler and it took it just fine. Honestly if I needed another ESC, I wouldn't hesitate to buy another one, especially with the price.

@rigobertoortiz6535

5 жыл бұрын

@@Kmcornell23 oh okay yeah I might buy one for my 4x4 arrma mega I have the castle motor 5700 kv I'm going to gear it 17t pinion and 90 tooth spur does it handle 3s just fine?

@MrDefy2000

5 жыл бұрын

@@rigobertoortiz6535 then I would stay with 2S, 3S could be too much for this cheap esc

@Kmcornell23

5 жыл бұрын

@@rigobertoortiz6535 I haven't tried 3s but 2s works great.

My tsky 120a make my motor go backward when I turn it on

@Kmcornell23

2 жыл бұрын

Swap any 2 of the motor wires and it'll go forwards as long as you aren't using a sensored motor.

@Texas_bikes66

2 жыл бұрын

@@Kmcornell23 I don’t want to Risk it mind if I send you the links of my items

@Texas_bikes66

2 жыл бұрын

@@Kmcornell23 it worked but either my battery’s dead or its sensor and shuts off I think my battery I haven’t charged in 3 weeks

Is this the same esc that says enjoy myself on the fan anyone 🤷

@Kmcornell23

5 жыл бұрын

Yes it is!

@rickyjohnson974

5 жыл бұрын

@@Kmcornell23 cool I just ordered one and a cheap 3800kv for my son's pede hopefully they both do ok lol my pede has the castle sidewinder 3 he's trying to keep up with mine 😂😂

i can't get my reverse to work :(

@Kmcornell23

4 жыл бұрын

There is an option to turn reverse off if you look through the options. Make sure you select the one with break AND reverse.

@siccreations1287

4 жыл бұрын

@@Kmcornell23 Thank you and i did make sure it was on the second setting for forward and reverse w/ break and still no reverse. :( Just got in the hobby and i am not having fun....this sucks. I have two cars now and both are broke after just a few runs and NO crashes. 750$ in and i just don't know what to do.

And that are race legal

My car is stuck at full throttle now...

@Kmcornell23

3 жыл бұрын

Sounds like you need to recalibrate your throttle limits.

@anthonymiller6696

3 жыл бұрын

@@Kmcornell23 got it haha, I forgot to hold down and press the button, I do have a question though

@anthonymiller6696

3 жыл бұрын

@@Kmcornell23 my throttle is faster in reverse (that’s why I’m at this video), I’m running it with a sensor so I can’t just reverse the plugs, can I change the throttle driection by using the throttle limits?

@Kmcornell23

3 жыл бұрын

@@anthonymiller6696 I'm not sure if you can do that or not but you SHOULD be able to swap the A and C wires around. B has to be connected to B though. Or just run it without the sensor. It worked fine for me without it.

@anthonymiller6696

3 жыл бұрын

@@Kmcornell23 my issue without the sensor is it’s in a crawler, Now I’m wondering if I can reverse the ESC trim, and reverse my radio throttle.

No reverse

@Kmcornell23

4 жыл бұрын

Are you asking a question?

@didgeteria9068

4 жыл бұрын

@@Kmcornell23 my ESC is a 60a Version ..has no reverse . i thought it did but nope...merry xmas

Crappy cheap ESC don't buy this one!!!👎👎👍

@Kmcornell23

4 жыл бұрын

This ESC is like sub $20... What did you expect? It works great for low powered vehicles on 2s, that's about it. I wouldn't recommend for 3s or things like 4x4's with high gear ratios. What I WOULD recommend it for is something like a 2wd rustler or slash on 2s. You could do a 4x4 but you'd want a decently low gear ratio.