Been running one in 2wd 8.5t and has been great so far. You can program it with the old ezrun led programming box although it’s easy enough with the button. The punch control is just a delay as far as I can tell and make the car hard to drive so leave it on max.

so i plan on building my second Traxxas bandit pretty soon, im looking at my ESC and motor options cause i wanna run brushless with a 3s lipo. what motor would you recommend to go along with the quicrun ESC? looking for quick acceleration and a medium top speed (50 to 70)

Razor are you using a program card or the 2n1 LCD program box to tune? I have the 2n1 and it won't connect

I've had the best luck with Hobbywing ESCs, from Juststock 60a for my 13.5T clay buggy to 300a 5th scale setups for my sand bashers, and also 6S 75 mph RC boats. Plus they almost all use the same program box. I have that ESC in your video on my Associated 4x4 clay race buggy with a 8.5T motor, hasn't missed a beat and barely gets above room temperature after a long session.

@chrisjones7371

5 жыл бұрын

How good r ur breaks as mine are average ive got mine in a losi sct with 13.5t motor and it doesnt slow down as my other esc ive had in the past

I've been running this ESC in my eb410 since I got it. Super fast, and it runs super cool. I'm running mine with a 5.5t.

@anthonyharris6165

6 жыл бұрын

scursion07 I got one for my eb410 also. Haven't built it yet tho. I have a 5.5 also for street bashing.

@anthonyharris6165

6 жыл бұрын

scursion07 are you using a program card or the 2n1 LCD program box to tune? I have the 2n1 and it won't connect

@RenBobbins

6 жыл бұрын

I just did a plug and play with mine. 8 race days in and it's still running strong!

@ledenhoj

4 жыл бұрын

Thank you guys for this comment. I was hesitant to put this ESC on my off-road 4wd buggies with TLR 22-4 (6.5T) and Tamiya DB01 (10T).

@nomore25

3 жыл бұрын

How to know the t of motor? Mine is 2845 3800kv.

I think this is a brilliant esc. It costs a fraction of a price of most competition esc and still does 80% what the more expensive ones do. throttle response is really good, steering is great and it is really controlable which is what you want for comp. racing. it has enough programming settings and it is not too heavy. the only downside it has is that it can´t be programmed for a 7.4 volt bec output, which makes the steering a little less precise, but you can definetley get used too that, that is not a big difference.

What do you think this would do in a redcat wendigo i just got one it came with unsensored motor and the hobbywing 60 amp esc size it does great just need sensored and dont want to buy mamba x and all

Another informative video, thanks

@Mustyweed

2 жыл бұрын

Nothing was informative

Where are you supposed to buy the sensored wire separate I’m confused

Did you get a chance to race the SC in which you installed this ESC? Any feedback on the performance of the ESC?

Can you reverse it to run on a mid chassis slash? I know my castle I can set to run motor in reverse

@TTMOTO888

4 жыл бұрын

yes, you can set Cw / CCW

Running it on a Tekno ET410 with a bandit motor. She’s minty!

@xWORLDxCHAMPIONx

3 жыл бұрын

@Titan Jonathan fucking robots

Would the quicrun 10bl 120 amp combo be a better fit for the Rival MT10 vs the Ezrun Max10 140amp combo? Also what size motor would you put in the MT10? Trying to decide between the two. Thanks!

is it good for a 1/16 e-revo, aka mini e revo

Can you run IT on blinky mode? Cant find the info.

And also then b6.1 review do you run a hobby wing xr10 60a

What is real good and make it 10-5 turn up and run with a 7-5 or any of them you can outrun

Is it fully water resistant

What hobbywing motor goes with this

Will this do okay in a rock racer/bouncer? I don't want a pure crawling ESC, but I want to be capable of getting through the rough stuff.

@rcbustanut2057

4 жыл бұрын

that is not solely upon the esc as much as its on the motor you connect to it & your pinion & spur setup. a lower kv rating motor with a high torque gear ratio is what your looking for with crawlers.

Hey i have that esc but can you tell me the manual on the sensored program my esc is not programed for sensored so can you help me with that

@chevyrc3623

6 жыл бұрын

Razor RC ok thanks

Do these have blinky mode?

You prefer these to castle?

@razor rc - would you able to try to flash the firmaware to the V2.1? that would be awesome....

@florianbenardeau4004

3 жыл бұрын

very good question

Do you still have this? Or can you tell me thoughts after having run it some...? A few guys at races last summer turned me on to this one, and I'm looking to pick up 2, one for the parts bin, amd one for a cheap 4mod for my son to run...

@RazorRC

4 жыл бұрын

Isaiah Furrow it’s good. For some people they might find the double-tap reverse annoying, but 90% of people won’t notice.

Hi what conector is to battery?

hi I got a really cheap esc from surpass on eBay it seams to be ok till I get the throttle up so high and then it goes straight to full but there's no sensitivity well this one fix that problem because my car goes out of control once the motor goes wide open more than what I wanted to

@Dashkingforex786

4 жыл бұрын

Buy this at $26.99 amzn.to/2ZQdPYs

Hey, you said that this suits best for 1/10 scale 2WD, for 4WD what do your recomend? what spec should i look for on an ESC for 4wd 1/10 buggy? i have a 6,5t motor... thanks

@RazorRC

2 жыл бұрын

This works for 4wd as a cheap option

Its that with turbo boost?

I’m using one of these escs on my 1/10 scale sct but I don’t know what the LVC (low voltage cutoff) setting is from the factory and I’m trying to run a 2s spektrum smart battery with it and I want to make sure I have the cutoff right. Can someone tell me what the factory LVC is thanks :)

@nasstudio2540

3 жыл бұрын

From factory is perfect

Can I put this esc, for motor brushless 3670 2650kv on 3S battery? I plan to put this on my 1/8 buggy. Many thanks for answer me.

@isaakvervenne8387

4 жыл бұрын

Rizal Firdaus Aditama i think so

@Dashkingforex786

4 жыл бұрын

yes you can bro, Buy now at $68.88 amzn.to/2TU8Die

itc can fits in 144001?

How do you use the program card on this ESC I can't find where to plug it in at and the fan plug is only two cable you can't plug the card into it.

@stpbasss3773

5 жыл бұрын

@@RazorRC ahhh I never thought of that I'll try it I figured out how to program the basics with the quick program button.

@adrianortiz65

3 жыл бұрын

@@stpbasss3773 Do I have to program it?? And how do i?

@stpbasss3773

3 жыл бұрын

@@adrianortiz65 it's in the instructions but it's done with the little button on the power switch. You cant change motor direction with this esc though so if its spinning the wrong way you're kinda SOL.

@adrianortiz65

3 жыл бұрын

Thank yoou!!!

What programing card works with this esc?

@csupakabra4

3 жыл бұрын

The one i got with a hobbywing 1080 brushed esc is working with this. You have to plug the receiver wires to the programming card.

Hi it me Alex I got a b6.1 just got it today and I just won’t to ask if this esc is good for that type of buggy

@5059ramesh

5 жыл бұрын

Go ahead

Can I put it in on my Arrma Granite 4x4 mega? Thanks.

@pukeylukey2852

Ай бұрын

No its going to blow up and u will only have the wheels ledt😊i used IT in Tekno et48.3 and IT wouldnt handle the power baby..all broke even the 4 speed tranasmision

Will this run a 3300KV motor on a 4WD SCT with 3S Lipo?

@nasstudio2540

3 жыл бұрын

Yes

Just setting up my XR10 Combo, G2 ESC and V10 G3R Motor, everything hooked up and soldered and it will not calibrate, no beep from motor, rapid blinking red LED. Brand New Hobbywing XRpro and it's defective ? Very Disappointed

What kind of battery would I need for this !?

@dafarao5936

3 жыл бұрын

2-3s lipo battery

The v2.1 had a lot more features than this one. All the parameters were adjustable via the LCD program card. Also you could download different variations of the software ie. blinky, mod, etc.

@ominousnefarious5919

2 жыл бұрын

v.2.1 is not the same , its not a Quicrun. Version 2.1 is a XeRun and why it has Flashable Firmware support. The Quicrun is a cheaper model based on the same PCB, just has features removed, higher max wind motor support, and a different processor.

Wahhhhhh! I wish they had an option to customize a battery plug for these ESCS, I don’t know how to solder anything..

@landy076

3 жыл бұрын

Most of hobby shop offert the welding service 😉

@roberttruesdell6151

3 жыл бұрын

No better time to learn. You will need to learn to solder if your in the hobby.

Xerun 120a v2.1 vs quicrun 10bl120 ? which one would you choose?

@RazorRC

5 жыл бұрын

Ivan 28 probably the quicrun, the V2.1 has been discontinued.

What’s up brother,I think this is the same esc I was looking at the other day at my hobbyshop,trying to hop up my 2wd slash for the track, hows the buggy upgrades going? Lmk what u think of this once u run it👍👍👊👊📹📹that’s funny u just said good for a 2wd 10th scale,so I guess I was looking at the right esc,yup now I know I was cuz u just said for ur slash,sorry I right my comments to early in the video n then gotta add to it as video goes on,lol

@STEVOD313

6 жыл бұрын

Razor RC Thanks bro

@gpaje

6 жыл бұрын

You can also run the Hobbywing 120a SC8 which costs about the same if you don't need a sensored setup. It can run 2wd 10th all the way up to 8th scale 4x4.

@stpbasss3773

5 жыл бұрын

@@gpaje this ESC runs sensorless

@gpaje

5 жыл бұрын

You can if you want, but the Quicrun 120a is a sensored ESC.

Can you use this on a crawler?

@ConditionZero76

2 жыл бұрын

yes

Just purchased this ESC and plan to use it with a 4.5T motor I have lying around. Could you please explain what the ">" and "

@daveg5420

4 жыл бұрын

> means greater than. 3 5 is greater than 3. 3

How would this work with a 2wd 17.5 or 4wd 13.5 buggies?

@RazorRC

3 жыл бұрын

would work fine, but it doesn't have blinky mode if your track checks

@roberttruesdell6151

3 жыл бұрын

Ok cool so for a guy that hasn’t racing in years it’s a good option to get back into it. No performance gain or lost going with the 160amp or the spec specific?

This ok for a associated b6.3?

@RazorRC

2 жыл бұрын

yes it will work

What’s all the colored wires for

@chriswebb383

5 жыл бұрын

The motor and battery...

@danyan55

5 жыл бұрын

5-6-2019= I have an Arma Granite BLX 4x4 3s and having MANY problems with their BLX100 ESC;s does this or any other brand fit my Arrma Granite BLX 4x4 3s?? with no problems?? Anybody Know????????

I hate it. It won’t go into reverse and no brakes. I have another one just the same that works fine but this one won’t program to do anything… I ordered a program cars but over it to be honest. Ideas?

@paulpadilla5288

2 жыл бұрын

Check your radio settings...

Is this thing reliable for everyday 2s running?

@thetimetraveler1427

3 жыл бұрын

They can't get wet!!!! Buy traxxas

@Andrew-hh3ol

3 жыл бұрын

@@thetimetraveler1427 that’s a huge price difference

Hi there, I liked and subscribed, is this waterproof?

@RazorRC

5 жыл бұрын

Thanks for subbing, not waterproof.

does anyone know what the compatible sensorless motor specs are for the Quicrun 10BL120?

@CarminesRCTipsandTricks

6 жыл бұрын

I'd like to know also.... I just got its "little brother", the 10BL60. I was told by four different people that it will be fine for my Wraith, with a TenShock 1750kv 6 Pole, 9 Slot Sensorless Brushless Motor. I've been in the Hobby since 1985 (I'm OLD!). However, this is my FIRST Brushless System, EVER!! 😱😱 I got the Programming Card also - and be AWARE here! The Programming Card comes with 3 different Charts, telling which number corresponds to which ESC function..... *NONE OF THEM are Right for the 10BL60!!!* The instructions for the ESC state which is which - NOT the Programming Card!! So KEEP those ESC Instructions. 😉 I have no idea if it's the same for the 10BL120.... If after you plug it into the ESC, and scroll through the functions - and you ONLY have nine - the charts on the Card WON'T work! Use the programming chart on the ESC Instructions. Now, if anybody with Experience can help me...... Is the 60 Amp ESC going to be adequate for my Wraith, used as a Trail Rig with some Crawling, only momentary bursts of speed - with the 1750kv Motor?? I'll add, because I am old school, just getting back into the Hobby after an 18 year Hiatus - I STILL run NiMhs!! 😱 7.2 or 8.4 volts only..... That's as much info as I can think of. Will 60A be good? Thanks! Carmine 🚂

@quadflopper1012

6 жыл бұрын

wow I too started rc cars back in the mid 80’s and also just got back into rc cars again after quitting for 18 or so years, spooky coincidence, you don’t hear any twilight zone music playing do you? ok me either so were cool. Only been back into cars for 8 months or so but actually started flying drones a couple years ago which was fun up until the government started trying to crawl up everybody’s ass over flying, so I went back to cars..phuck the FAA I think I read somewhere that the quicrun 60a & 120a use the same programming card, maybe you got the programming card for the ezrun esc’s A 6 pole 1750kv motor what does that run like, bet it makes a lot of torque, I wouldn’t think that a 1750kv motor would have any problem running with a 60a esc, supposedly the lower the kv the lower amperage esc you need but who know for sure. That ‘s one thing really different about rc’s this time, trying to get useful comparable motor data is like trying to get a straight answer out of your ex-wife, and no one seems to want to or know how to make a cross over comparison between sensored and sensorless motors. Let me know what you find out I’m curious to know because it would be cheaper then running higher kv motors which require bigger esc’s

@CarminesRCTipsandTricks

6 жыл бұрын

That's a cool similarity!! 😱😱 I left the Hobby, because of craziness and drama. I was a Semi-Pro Driver for OFNA, in 1/8th Scale Nitro Buggies. Semi-Pro meant that Sponsors didn't completely Bankroll me. I only got some assistance, and free parts.... The pettiness of the other Drivers, Marshalls and Teams, was staggering!!! It became like being back in Kindergarten! 😭😭😬 It wasn't fun anymore, and it was a period when Rigs and Parts became OBSOLETE, SO quickly, that it was Expensive just to keep up. So... I walked away. The 1750kv TenShock Sensorless Brushless Motor is an absolute JEWEL!!!! (For what it was made for) 6 Pole 9 Slot Motor is really a First in the Hobby. Let me tell you, starting from stopped and Crawling.... This is nearly as Smooth as any good 27-45 Turn BRUSHED Motor! *With* longer runtimes, NO COGGING, cooler, more efficient, MUCH Faster, and at LEAST TWICE as much Torque!!! 👏👏👏👏👏👍👍😎 They are a smaller Company, with an amazing Product. They also make them in 1250kv and 2400kv. They're all 540 sized, with standard 1/8" Pinion Shaft. (The 2400kv isn't AS Smooth as the others, but has more reserve Wheelspeed) Here's where I'm at so far......... The Hobbywing WP10BL60 ESC hasn't even gotten WARM yet!! (I'm using Test Equipment) The Programming Card works well. To use it on THESE ESCs, disregard all of the Card Charts, and use the Chart in the Manual for the ESC itself. The Amp Draw, with my Motor in my 8 pound Wraith, is not even CLOSE to 60 Amps! Neither Burst Power or Stall Power are NEAR the Hobbywing's 240 Amp Burst Limit, at roughly 147 Amps peak. That leaves room for higher peaks, in different situations!! This 60 Amp ESC is MORE than adequate for the TenShock Crawler Motors at least! 👍👍😉 You're absolutely right!! Getting GOOD, comparable stats on Brushless Motors and ESCs is downright IMPOSSIBLE!!! If my tests keep going as well as they have been, I may have to come out of "Video Retirement", and try to make a Video with some actual USEFUL information! 😱 We'll see.... Carmine 🚂

@CarminesRCTipsandTricks

6 жыл бұрын

.... I did find out that your Rig's WEIGHT almost has more to do with ESC selection than Motor Rating! Although they are combined.... The higher Weight your Rig is, the lower the KV limit. If you want high KV, THAT'S when you want a higher Amp ESC. Brushless setup information is next to NIL!! It's going to be up to us.....

@quadflopper1012

6 жыл бұрын

i guess you could say i was semi semi pro back then, i was sponsored by a hobby shop and was running Kyosho 1/10 scale, I got most my parts free, entry fees and lunch on race days if the owners wife felt like packing us one. I had to stop because i broke my back and some other body parts at work and went through a boat load of surgeries, i still can only stand long enough to make it through 1 battery pack then i have to get off my back for a while sounds like you've got a better handle on the brushless thing then most of the self proclaimed experts so i'll bounce a question off you that i can't get an answer to. if low kv motors are for torque and high kv for speed, why are some of the guys doing 150+ mph speed runs running 7000+kv motors while others are running 2000+kv motors and the same goes for off-road vehicles, you see one guy's off road truck running a 2100kv motor while another is running a 5700 kv well i got to hobble off to run some errands talk to you later, Brad

I got a 4pole castle creation engine I'm keeping it but I got a esc by castle I dont have a computer to program it for reverse guess I'll just sit it in a box paid 200 for it

@daveg5420

4 жыл бұрын

you don't need a PC. the quick start set up guide is in the box with your esc.

@ConditionZero76

2 жыл бұрын

or just reverse your motor leads (very simple)

I don’t really see a reason in buying a $150 esc. I run these with all my race vehicles though.

@OswaldBeef

4 жыл бұрын

Brandon Cortez what about this for a super fast touring 1/10. Wondering about what motor to go with my hpi sprint on 3s.

@OswaldBeef

4 жыл бұрын

Brandon Cortez 8.5T?

@brandoncortez5669

4 жыл бұрын

I run this with a 10.5 reedy censored motor on 2s. I’m not sure on 3s. I thought 3s was make my motor run hot because it is only rated from 1-2s lipo.

@brandoncortez5669

4 жыл бұрын

If you want to run 3s , get a motor that will run on 3s. I run a 13.5 in my Durango desc210 SCT and it hauls ass. Make sure you get a good quality battery to get the most power

@brandoncortez5669

4 жыл бұрын

Run a 13.5 on 2s. It will last forever and run very well. I recommend reedy or Maclean. It’s expensive but they put a lot of work into there motors. For a battery I would run a reedy 2s shorty battery. They are high quality. Cheep batteries will crap out.

Hey Razor. I'm trying to upgrade on a budget my arrma Typhon to brushless from brushed. I have a 3660 surpass hobby motor that is 2650 kv. Would this ESC work in this setup? My biggest fear is ESC catching on fire and ruining the whole car. I mostly just bash this car and take it to the track to play with my kids occasionally.

@mouaxiong8618

2 жыл бұрын

Use a 2s lipo and you shouldn't have any issues.

Mine goes fast then cycles slow? Wtf

Would this run great with a 17.5?

The tsky 120amp esc is alot like this

@rustyus7739

5 жыл бұрын

Yes. Those cheap (key word) TSKY "blue" 120A ESCs that you find all over the interwebs does look like the Hobbywing. The TSKY is a wannabe ESC, but does not measure up with durability and specs of a Quicrun 10BL120. I've toasted, roasted, and fried numerous of the super low budget TSKY speed controls.

@gamingprotocol8871

5 жыл бұрын

@@rustyus7739 is that esc (hobbywing 120a) is ok with 3s 1/10 scale truck with 3650 4000kv motor?

@fx9188

4 жыл бұрын

@@gamingprotocol8871 I think so, because the 10BL120 I will put it in my turnigy Td10, with a battery in 3S 5000mAh 80C and a 5200kv motor

I'm goin put this in my rustler

HI, dose esc led blinking at 0 timing?

☆Edit: Changed my vote to the 10bl120!☆ I love my Quicrun 10bl120 but I would have to vote for the Hobbyking X-Car 120a ESC as the best BUDGET 120 amp ESC. Verion 2.1 is a different model than the Quicrun 10bl120, the Quicrun is not a newer model of the XeRun V.2.1 but in fact is it's own model all together, but based on the XeRun V.2.0 PCB. The XeRun V.2.1 does have 8 steps Timing control. The V.2.1 is a XeRun, not a Quicrun. The Xerun 120 (model#: 81020170) is very different. It has USB/PC upgradable firmware support. The Xerun V.2.1 has much better components like MOSFETS from IRTM in the U.S. and also uses UltraLow Resistance Capacitors from RubyonTM in Japan. These better components give the XeRun 120a ESC a burst current of 960 amps (the Quickrun 10bl120 has only a 760 amp burst) XeRun 120a ESC has a Resistance of: 0.0003 ohms; it can support much lower turn motors: on 3s it supports 5.5t:on-road/ 8.5t off-road (the Quicrun supports 8.5t/10.5t on 3s). That said the Quickrun is a fantastic Budget ESC! Having its PCB roots born from the well proven Xerun series and made by only Shenzhen workers that have proven themselves worthy to work the Hobbywing line! The XeRun 120a ESC is still manufactured, though hard to find in stock. It's available in blue or black from the Shenzhen Technology Co., Ltd's plant. The plant is absolutely MASSIVE, I've been there twice. Shenzhen Technology Co., Ltd. makes Hobbywing products under the name "Shenzhen Hobbywing Technology Co., Ltd". Shenzhen Technology Co., Ltd manufacturers many of the brands we are familiar with like Surpass Hobby, Hobbyking & Rocket. My vote for the best budget 120 amp ESC would be the HobbyKing X-Car 120a ESC. The X-Car IS a XeRun V.2.0 having identical components. The manual available for tge X-Car on Hobbyking's website IS the XeRun 120a V.2.0 ESC manual. You can flash the X-Car 120's firmware with Hobbywing firmware unlocking Turbo & Boost which the Quicrun does not have. Although the Xerun V.2.0 & X-Car 120 have 15% lower power output than the V.2.1, they still have more power output than the Quicrun and support the same motors as the XeRun V.2.1. And finally the X-Car costs $27.99, nearly half the Quicrun's price.

@RazorRC

2 жыл бұрын

Awesome information! I actually used the X-Car 120A in my Slash Race Upgrade series, but it died on about the 5th pack, so I never bought another. The QuicRun 10BL120 has been very solid for a few years now, so I still recommend that one.

@ominousnefarious5919

2 жыл бұрын

You know i haven't had any issues with the Xcar ....yet 😂! I have a second one NIB as a backup. I did the HobbyWing firmware update on my X-Car 120 and was wondering if yours had the same? It unlocked Boost & Turbo and it ran cooler and the brakes/reverse were so much better after the firmware swap. My 10bl120 is currently paired with an '8.5t SkyRC Ares III Pro' in a R35 bodied TA-04 and its been quite a workhorse ESC! I have to agree with you, im converted! When you combine the FOR CERTAIN Hobbywing quality with its support and features, size, power and price you can't beat it! I am currently looking for another budget ESC and require sensored, sensorLESS, 80a to 120a, and fairly low turn capabilities even on 3s. Narrowed it down (barely) to the 10bl120, Fire Phoenix XeRun 120a, the newly released Surpass Hobbies Rocket (now just called ROCKET-RC) clone of the 10bl120, and two fairly powerful 200a ESCs the LRP Spin Pro and the little known and very versatile Traxxas VXL 3355x. NOT the "3355R" but the "X", the X has automatic detection of sensorless AND sensored and does both Brushless or BRUSHED, its available from rcmart for only $80 and may be the most versatile BASHING ESC available, imo, 😆. Out of my list.... The VXL"X" is the most versatile, the LRP is most advanced, the Rocket-Rc is newest , but the 10bl120 is half the price of the 200a ESCs i listed and proven over time over the new Rocket-Rc 120a ESC. So once again the 10bl120 looks like a winner. BTW HobbyKing moved their Oregon warehouse to a smaller location earlier this year and since has had barely any stock of anything in the U.S.A., shipping from U.K. is astronomical and therefore ive weened myself from even going to their site! Booooo! Therefore the X-Car 120a ESC isn't even available in U.S.A. and if i ordered it from UK shipping would be somewhere around $35!!!!!!!! So it's not even a contender for "budget 120a ESC" anmore!

@Frank-o8h

9 ай бұрын

@@ominousnefarious5919 you are very experienced bro 👍🏾

Nope they suck .I got three runs out of mine,before the esc just started to power the motor flat out as soon as you turn the power button on ,yes the transmitter was on first ,it won’t calibrate the throttle again since it was set up ,it just beeps and nothing else ,there’s a few folk on the net with varying problems with this esc ,from no power to the motor,problems like mine and severe burning smell after a few runs .Mines only running a 13.5 turn ,so it ain’t a high output motor by any means .

This is going in my 1/16 scale hbx 16889 brushless 3s lol ha! Crazy

Great esc but not waterproof 🥲

Anybody run this thing on 4s?

@ConditionZero76

2 жыл бұрын

it's rated to 3s, 4s will burn it up fairly quickly

It's a brushed esc.

Decent!

ive seen this thing smoking alot

@TTMOTO888

4 жыл бұрын

All my race vehicles, 4 in all , have this onboard. Been reliable so far.

DONT buy this esc if you plan on running it sensored because there's no option to switch the motor rotation so its worthless for crawlers.

@ConditionZero76

2 жыл бұрын

reverse your polarity leads in your motor

These ESCs are garbage !! If they get they get moist they fry!! Vxl3 ect and castle is way better!! Never buy quic run!!!

The hobbywing is the best esc out there for the money i own 4 of the 10bl120’s and 3 10bl60’s you cant beat them