17.5 & 13.5 SPEED SECRETS, TIPS, TRICKS || How to tune motors, pump batteries, and weight

Become a channel supporter on Patreon! bit.ly/3pVGhkZ
======================================
Current Cars
My 2wd buggy: bit.ly/3u9bfyi
My 4wd buggy: bit.ly/48Of0In
My 1/8 EBuggy: bit.ly/4b7mSX3
My 1/8 Nitro Buggy: bit.ly/3vLNqNj
My ETruggy: bit.ly/3SgGBLt
======================================
What’s On My Cars
Best 1/10 Tires: bit.ly/485aUL7
Best ⅛ Tires: bit.ly/47RlIMH
Fast 13.5 Motor: r1wurks.com/collections/v21-h...
Fast 17.5 Motor: r1wurks.com/collections/v21-h...
Motor Fan: bit.ly/3uhc345
Nitro Engine: bit.ly/3uhuCVM
My Battery 2s: r1wurks.com/collections/2s-sh...
My Battery 4s: bit.ly/4bae2Yy
My Radio: bit.ly/3SwJARj
My 1/8 Servo: bit.ly/48K3opZ
My 1/10 Servo: bit.ly/4bms2yK
My ESC: r1wurks.com/collections/elect...
ESC WiFi Module: r1wurks.com/collections/elect...
Bodies: bit.ly/3SgKXSy
======================================
Pit Space Stuff
Super Powerful Charger: bit.ly/47OMJA7
Parts Box: amzn.to/2OkQqGF
======================================
Tools
Fav Allen Wrench Set: bit.ly/3Sb9MPT
======================================
Shop
Fav RC Store: bit.ly/494O2fu
======================================
Video Equipment I use:
Main Camera: amzn.to/3aV5fNg
Main Lens: amzn.to/3sytgzM
Zoom Lens: amzn.to/37NuGhx
Macro Lens: amzn.to/3qXDUQ8
Main Mic: amzn.to/3krcuQ5
Vlog Mic: amzn.to/3bMhXNm
=====================================
Social Media Links:
Instagram: ryan_stiles bit.ly/2nZxPUO
Facebook: Ryan Stiles Harris bit.ly/2GdbVUB
Patreon: bit.ly/3pVGhkZ
=====================================
#rc #rccars #rcracing

Пікірлер: 297

  • @jcchaconjr
    @jcchaconjr5 жыл бұрын

    Heh, back in my day, we used the old school approach to discharge our batteries. Your average 12V incandescent automobile parking light bulb pulls about 1 1/2 Amps. We used to daisy-chain discharge rigs with 16 bulbs together to pull a 24 amp load against our batteries. Aside from draining the battery, it also had the advantage of giving us a visual indicator of how much charge was left after a run. The technology may change, but the innovation never dies. 😉

  • @BOBBEATS504

    @BOBBEATS504

    3 жыл бұрын

    real

  • @Jut77

    @Jut77

    3 жыл бұрын

    Lol I did this

  • @n10cities

    @n10cities

    3 жыл бұрын

    Been there done that! Very effective! Some folks would use a sealed beam headlamp (in old cars) that did a pretty good job.

  • @TrevorCazes

    @TrevorCazes

    3 жыл бұрын

    thats what i did!

  • @josephgrenier9011

    @josephgrenier9011

    2 жыл бұрын

    @@TrevorCazes hey man my calls f****** taking s*** on me call me back and he called me to know for you

  • @rootsrock1n
    @rootsrock1n4 жыл бұрын

    I raced about 20 years ago. Trinity has always been an excellent product. Glad to see they are still great!

  • @NathanStorer-RC
    @NathanStorer-RC6 жыл бұрын

    I like your videos as they give legit tips. You've earned a new subscriber :)

  • @mathewavr8012
    @mathewavr80123 жыл бұрын

    I really appreciate all the tips and tricks your giving in all of your videos. I just got into the rc carpet buggy thing and was having trouble making one of the jumps at my local track. I had to turn the timing all the way up on my motor and went from a 28 to 30t pinion and started making the jump now. I'm going to have to look into some better batteries though as I'm only running a 100c pack. Very informative. Thanks for the help

  • @evhexrc1765
    @evhexrc17655 жыл бұрын

    Lol I watched this video the day you put it out... here I am again. Your interview video you put out a bit earlier reminded me of it.

  • @PursuitofPerfectionA
    @PursuitofPerfectionA7 жыл бұрын

    Another great video, I started breaking down my cars after every race weekend and clean them real good and also refill my shock oil and it was a night and day difference.. cars drove great and consistent!! Thank Ryan!!

  • @RyanHarrisRC

    @RyanHarrisRC

    7 жыл бұрын

    PursuitofPerfectionA That's awesome man! Glad you got your cars super dialed now!

  • @Cannabis_Connoisseur

    @Cannabis_Connoisseur

    2 жыл бұрын

    @@RyanHarrisRC you should do an update to this. It's got a ton of views and there's not a ton of other videos with this much good info so dense. Be nice to see so new tips 4years later.

  • @jimleconte1969
    @jimleconte19695 жыл бұрын

    Hey Ryan I watch a lot of your videos and they are very helpful. thank you and keep making them

  • @Vladle2099
    @Vladle209911 ай бұрын

    I’m running 10 year old equipment on some of my buggies and it’s fine for practice. I have newer stuff and I’m not there yet where it makes a huge difference. The older stuff is plenty for my skill level.

  • @jakelowang4132

    @jakelowang4132

    10 ай бұрын

    I do some Drift RC and i looking at video for adjusting my timming. I got the progbox 6 in 1 Skyrc and when i do the motor timming test it give me 27 degree. I run 27 boost changed the start rpm from 15k to 12.5k ad turbo his at 37 degrees and end at 42.5k. It get warm but seems to be fine, i try 30 boost and 40 turbo with same rpm and the motor get hot but still under 100 degree. I also change the pinion gear, from a 22T to a 20T, i go to the nearby track, one guy told me they run 19T, i had trouble follwing them at 22T but now at 20 ica follow them and they have a plastic track imported from Japan. They have the biggest track in Canada about 30 min, my friends and i do some on concrete. Concrete is harder is more abrasive

  • @artieaudio77
    @artieaudio775 жыл бұрын

    Love that old school flow of goodies behide. Haha the memories of rc racing in the early 90's

  • @scottylacombe7648
    @scottylacombe7648 Жыл бұрын

    Love the content, tips and trick’s you are sharing. Really appreciate the knowledge shared. Keep up the great work!

  • @tonyvtc3
    @tonyvtc3 Жыл бұрын

    Thank you for the reminder on these tips. It’s been over ten years since I race now 2022 I’m back into touring on road.

  • @Spdyjay001
    @Spdyjay0013 жыл бұрын

    I quit racing back in the day right at the cusp of Li-Po and brushless motors. The promise back then was "Charge and go". No turning motors, dialing brush springs and brushes, matching battery cells, discharging individual cells, dyno testing batches of 27T stock motors looking for a hot armature, etc. Looks like not much has changed, and I still need another duffle bag of charging/discharging and motor tuning equipment to stay competitive.

  • @alphawolf6458
    @alphawolf64583 жыл бұрын

    This video earned a sub! Cheers to the laps ahead✌

  • @rcracer3235
    @rcracer32352 жыл бұрын

    Good video Ryan thanks for the tips

  • @BenFreedmanRacing
    @BenFreedmanRacing4 жыл бұрын

    This is awesome information, I had no idea you could discharge faster with this method

  • @DesertJeff
    @DesertJeff5 жыл бұрын

    Awesome explanations! THANK YOU

  • @juniorvalentine8837
    @juniorvalentine88376 жыл бұрын

    the more of your videos i watch, the more of your videos i want to watch. thanks for making them

  • @Stewman454
    @Stewman4546 жыл бұрын

    Great video's Ryan!

  • @crazykoolrn
    @crazykoolrn6 жыл бұрын

    Love your videos, very informational. Your explanations are so down to earth. Are you able to make a video explaining how to make a discharge bank and selecting an appropriate charger for different racing needs? Thank you so much.

  • @kameroncowles3531
    @kameroncowles35316 жыл бұрын

    Please make more videos I really enjoy them and look forward to seeing them👍🏼

  • @RyanHarrisRC

    @RyanHarrisRC

    6 жыл бұрын

    Trying to man! I'm working on a few to get out soon!

  • @RTmadnesstoo
    @RTmadnesstoo5 жыл бұрын

    Great tips ! I wish I could drive good enough to take advantage of your ideas.

  • @FeedThatAddiction
    @FeedThatAddiction6 жыл бұрын

    Yes very awesome video thanks a lot; I wasn't sure of all these battery tricks some people are using.

  • @ricgruber9185
    @ricgruber91856 жыл бұрын

    Very informative,like your videos

  • @kevinbates3575
    @kevinbates35753 жыл бұрын

    Thank you for all the knowledge and tips! Been tinkering with RC for a long time but i am getting more serious about racing at the track now. I have older associated cars B44.2 with a 7.5T system , and a T3 with a 10.5T system. Might be upgrading soon if i keep at it.

  • @jbsimons4099

    @jbsimons4099

    2 жыл бұрын

    I have a 7t motor I my eb48

  • @briansee400
    @briansee4006 жыл бұрын

    U rock bro thanks for all the tips

  • @williammitchell9560
    @williammitchell95605 жыл бұрын

    Another Great video for a guys who is switching from oval to off road!

  • @vishnup5742
    @vishnup57426 жыл бұрын

    Awesome good job on the video

  • @chevyrc3623
    @chevyrc36236 жыл бұрын

    Awsome tips

  • @Chris-zc7my
    @Chris-zc7my6 жыл бұрын

    Great video dude, I do the regenerative charge on my lipo with the icharger 406 duo and the difference it makes is ridiculous !!!!! But at a risk to, keep lipo in safe sack and out the way of other people.

  • @steveroxx69
    @steveroxx694 жыл бұрын

    Thank you very much very informative video

  • @gregcano417
    @gregcano4172 жыл бұрын

    Hi Ryan I like that charger you have I just got a spectrum charger but I’m totally digging the one you have

  • @erichappy760
    @erichappy7606 жыл бұрын

    Great information thank you! Could you go into more depth on how to build the discharge bank?

  • @Corrie2078
    @Corrie20785 жыл бұрын

    Hey Ryan. Question, do you have a video that explains the best way to choose and set gearing? I’m new to electric RC and still watch your videos.

  • @speedrunner8356
    @speedrunner83564 жыл бұрын

    Good tips Ryan

  • @pjburcham5938
    @pjburcham59382 жыл бұрын

    Loving that jacc's civic on the shelf.... Would love to have 1 myself as I'm a Honda guy lol

  • @charlesjensen8908
    @charlesjensen89087 жыл бұрын

    Keep it up man, I look forward to you videos. I'm getting back into the hobby and I'm planning on getting to to racing on Astro turf any tips

  • @RyanHarrisRC

    @RyanHarrisRC

    7 жыл бұрын

    Charles Jensen Nice! That will be a lot of fun I'm sure! I don't have too much knowledge for astro or carpet stuff since I am an outdoor guy mostly. Maybe check the setup link in my description, find your car, and look at the astro setups there 👍

  • @mikeinvegas1
    @mikeinvegas14 жыл бұрын

    hi love your videos.. especially during this coronavirus time being at home. im about to start a drift build.. getting parts for mst fmx build. does all this apply to drift motors?

  • @mariowoodsN5
    @mariowoodsN54 жыл бұрын

    Hey Ryan, I’m setting up a T6.1 and want to get additional improvement parts during the build, comes led you suggest the parts I should start with, the best bang for my buck? I watch all your vids👌

  • @stavart13
    @stavart135 жыл бұрын

    Top video mate! You should open up an RC University, Great teacher!

  • @gabrielgarcia8526
    @gabrielgarcia85263 жыл бұрын

    Hello Ryan, Congratulations for your video. I love it. I'm frensh and here it's really difficult to have explanation about 1/10 TT or even more in general. Everytime I watch a video of you I learn something great 👍. I don't find a video about setting of 4wd chassis. Per example the drop of 1/10 TT..???. OK if you have a little time I would be really happy that you explain how I can setting the droop. Have a good day Gabriel

  • @vango82
    @vango827 жыл бұрын

    Very useful, I just bought my B64D :-)

  • @edwinwx260

    @edwinwx260

    4 жыл бұрын

    You still in the hobby?

  • @garrykennedy5484

    @garrykennedy5484

    4 жыл бұрын

    @@edwinwx260 Not sure he's with us anymore... Hmmmmm................

  • @papocordova717
    @papocordova7176 жыл бұрын

    Very helpful

  • @1c1r1x
    @1c1r1x5 жыл бұрын

    Hi Ryan, how about making a video on how to achieve the proper gearing.. Also, how to figure this out in determining what is proper for the track/ driving style etc.. Thanks Chris

  • @CraigMaline
    @CraigMaline5 жыл бұрын

    Ryan would tell me how you have your settings on your 406 due setup to charge and discharge. Thanks for the videos.

  • @sassch1
    @sassch16 жыл бұрын

    Very helpful video, thanx! Can U give us an instruction to build the external discharge helper for Your iCharger?

  • @RyanHarrisRC

    @RyanHarrisRC

    6 жыл бұрын

    I think I can do that! I'll have to order some fresh ingredients and make a nice one for you guys 👍

  • @hawkeyelikesbikes
    @hawkeyelikesbikes6 жыл бұрын

    Heads-up: You have your resistors wired up in parallel, not series. Otherwise, great video and thanks for the input. Coming into this after 16 years away - propulsion technology has completely changed!

  • @driverman8615

    @driverman8615

    Жыл бұрын

    :) back after 30 years I am a dinosaur.

  • @rocpile

    @rocpile

    Жыл бұрын

    Indeed, that bank of resistors is wired in parallel

  • @voruant10
    @voruant104 жыл бұрын

    Hey Ryan, just found your channel, its very fun and informative! are these brushed

  • @sebtarta
    @sebtarta6 жыл бұрын

    Great video as usual! One thing though, you said that the resistor bank is wired in series, yet they are in parallel in your video. 9:16

  • @leeroyexcavator9149
    @leeroyexcavator91492 жыл бұрын

    Good tips. Unfortunately there are no off-road tracks anywhere close to where I live. We only have a couple oval tracks now which is what we race..The only off road track that was near by lost it's building lease about 2 yrs ago! Anyway power still matters alot when limited by class rules.

  • @Skippy813Net
    @Skippy813Net6 жыл бұрын

    Hey Ryan with the resistor bank i think your meant to wire it in parallel ?

  • @KimmyR3

    @KimmyR3

    5 жыл бұрын

    yep.

  • @BK-zp8vl
    @BK-zp8vl5 жыл бұрын

    Hi Ryan, just found your videos and they are awesome. Hello RC racers, looking for some advise. I’m looking to getting back into racing and was wanting to know which class of 2wd 1/10 buggy would be. 17.5 stock, 13.5 stock or mod would be cheaper to be competitive in. Looking for electronics ( motor, esc and battery combo) for my TA b6.1.

  • @michaelmeyer7246
    @michaelmeyer72464 жыл бұрын

    Hey Ryan whats the best timing setting for 13.5 spec ? iv been told 50 degrees ?

  • @federicopralong9350
    @federicopralong93506 жыл бұрын

    Hi Ryan thanks for the video.A few questions. So the famous c values of lipo batteries don't apply here...? 2)- not many charger alows you to charge at 40 amp ..so could you recommend one..3). How much time takes you to discharge at 40 amp a lipo bat? They don't blew up or became bigger.i have some lipos and i m worry about the burst current all the time ..so the esc drain higger current from the battery??thanks your explanation helps me a lot to understant .

  • @Lindholmer5k
    @Lindholmer5k5 жыл бұрын

    would it be possible to use some sick resistors between the battery whatever needs power to boost the power ? i realize that the cap will not be able to supply the higher current for long, but atleast you would have a boost as you turn on to the straights?

  • @lilronnie678
    @lilronnie6786 жыл бұрын

    Hey Ryan, great video. What spur gear/ pinion gear combo do you recommend with a 13.5 motor 4wd buggy

  • @RC-ty5ym

    @RC-ty5ym

    4 жыл бұрын

    What car? What internal gear ratio?

  • @markreed9875
    @markreed98755 жыл бұрын

    I was wondering if you would answer a question about discharging/dumping your batteries. When u discharge them at the max amp discharge, what do you bring the battery down too? I’ve recently started this and I was told 3.22 by a racer at my local hobby store. Do u mind sharing your opinion and what they should be brought down to. Thank you, great video btw.

  • @andrewcorreia3
    @andrewcorreia36 жыл бұрын

    Hey Ryan, I know it will vary from track to track but can I ask what timing and spur/pinion combo you are running on your B64? I am running the same motor in mine at SDRC. Also I made a grave error and ran the buggy for too long without a fan and it temped ~204 F when I took it off the track... first run too. If I put it on a motor tester is there parameter that would show if/how much it had been damaged? Another very informative video for when I get to the point of running consistently enough to use these tips.

  • @kurtosborn7577
    @kurtosborn75776 жыл бұрын

    What is the best way to select the proper Antiroll bar for high traction carpet...

  • @superjoint57
    @superjoint575 жыл бұрын

    What size resistors are those? And what did you use for the metal rods that connect them? Thank you!!!

  • @LuisSanchez-hc6fh
    @LuisSanchez-hc6fh6 жыл бұрын

    Ryan what can I do to repair d front steering, is not working because I think it burned when I used another battery 😕

  • @Bobby-Love
    @Bobby-Love Жыл бұрын

    Where did you get that cool pit box behind you? Good video.

  • @corydixon65
    @corydixon653 жыл бұрын

    Isnt there a better way to put heat into a battery than charging/discharging at extremely high amps? Like some sort of warmer or blanket or heat gun?

  • @manuel39164
    @manuel391646 жыл бұрын

    What Think you about Certified 13.5turn Motors from Trinity thx

  • @alfa7108
    @alfa71086 жыл бұрын

    good vid my fellow Ocalian. hope to see u at our local track soon

  • @RyanHarrisRC

    @RyanHarrisRC

    6 жыл бұрын

    billy Johnson me too 👍

  • @thomaskuter6689
    @thomaskuter66895 жыл бұрын

    You video is talking about 2s batteries when tuning motors I was wondering about running a 1s battery 1/12 scale pan car How would I set timing up and amp draw limits on the 1s power

  • @VestedUTuber

    @VestedUTuber

    3 жыл бұрын

    More or less the same process. The voltage doesn't change how the equipment works.

  • @luizdemattos4485
    @luizdemattos44856 жыл бұрын

    What is the highest acceptable internal resistance for a shorty running spec, before it is time to dispose it? Thanks

  • @roosterreagan8469
    @roosterreagan84696 жыл бұрын

    u might add "C" ratings to your battery overview, about how C rating is discharge rate (but C is also used in reference to charging, its easy, discharge is like 30 or 60 or 110 C and charge rate C's are like 1C or 2C, as recommended by manufacturer) and thats where your "punch" comes from(i.e. 100 C>80 C), i know some guys over look it and get a 30 C battery and charge the crap out of it thinking that's the trick. just a thought, not trying to step on anyones toes or be a know it all, vids are great, i'm subbed, keep it up!

  • @AndrewClarkePhotography
    @AndrewClarkePhotography2 жыл бұрын

    Hey Ryan, seen so many of the videos, love your work. I am wondering if you may do a :newbie to racing video. Not so much about setup, but what you need to get started, specifically around tools. I personally run 1/5th truck and dabbling in mini 1/5 this is the FG stuff. But also run electric GT serpent in the social clubs races. Interested in your thoughts, on were to put money initially to cover you for different sizes and quality. I know all categories have their specific tooling or that particular car. But I think this is more aimed at the rookie generalist. There are a lot of club guys looking for info and they definitely fall under the new to racing category and it all gets very confusing. As always, thank you again for all the work and content you put out, I have learn so much from you, 'keep it right side up' all the best.

  • @robsmith7560
    @robsmith75603 жыл бұрын

    What's up Ryan.. I recently entered for a brushed class near me. What is the proper way to maintence and maintain a 12t brushed motor.

  • @gorillabrakes
    @gorillabrakes6 жыл бұрын

    Ryan can you answer this one How would you set 7.5T and 10.5T motors? What's a good starting point for current draw?

  • @AnthonyM1
    @AnthonyM16 жыл бұрын

    Hi Ryan....first off...THANKS. Question?....Do you set the timing to draw 6 amps under No Load?

  • @magicalminis597
    @magicalminis5976 жыл бұрын

    So interesting to see battery conditioning ideas of 25+ years ago for NiCd and NiMh batteries being used on todays LiPo packs. When LiPo batteries first came out the marketing was battery conditioning was a technique of the past.

  • @KimmyR3

    @KimmyR3

    5 жыл бұрын

    lol yeah. my thoughts exactly when people started doing these things about 2 years ago on my local track.

  • @mattstang1983
    @mattstang19835 ай бұрын

    What would you discharge and charge a 850mah 2s mini b battery at to get some extra punch?

  • @SnakeLover1989
    @SnakeLover19896 жыл бұрын

    hey dude., im looking to start up 1/10 touring car carpet racing, but dont know where to start, motor and esc wise.. i think im going to start off in the slower class, not going to jump straiight into 13.5 brushless.. So may start in 21t brushed.. any BRCA legal 21t motors that youd recommend? Thanks

  • @MrZimeir
    @MrZimeir6 жыл бұрын

    just tune both my engines and temps are great, thanks

  • @michaelcondrey8681
    @michaelcondrey86816 жыл бұрын

    I do speeds run, on road car , the batteries in parallel or series ? and why? for fastest speed

  • @JustinGreenRC
    @JustinGreenRC7 жыл бұрын

    Nice explanation

  • @RyanHarrisRC

    @RyanHarrisRC

    7 жыл бұрын

    Hope it helps!

  • @99ville
    @99ville3 жыл бұрын

    Is 5 or 6 amps good for no prep racing with a 3.5t or 2.5t motor?

  • @mdemers767
    @mdemers767 Жыл бұрын

    Hi Ryan... I can't be sure without getting a closer look at the polarity, but are you SURE that resistor bank is assembled in series? Because it sure looks like it's put together in parallel.

  • @douglasseitz9478
    @douglasseitz94784 жыл бұрын

    Hey Ryan love your videos. Question I run 13.5 Short Course Street Stock class and a 21.5 buggy Street stock class on dirt oval do you have any videos for tips on setups and advice for these classes and oval configurations

  • @RC-ty5ym

    @RC-ty5ym

    4 жыл бұрын

    Oval sucks!! Driving in circles isn't that difficult! Go to a right race track!

  • @VestedUTuber

    @VestedUTuber

    3 жыл бұрын

    ​@@RC-ty5ym You've obviously never actually raced oval of any kind. It's probably the most effort for the least amount of gain for any form of racing, in part thanks to its simplicity.

  • @jamesbimmer7321
    @jamesbimmer73216 жыл бұрын

    How would you set 7.5T and 10.5T motors? What's a good starting point for current draw?

  • @alfa7108
    @alfa71086 жыл бұрын

    hey Ryan, hru? are the new 7.6v batteries track legal ?

  • @craigjones2854
    @craigjones28544 жыл бұрын

    Iv seen the battery thing done. But there is one thing it does not last. The IR is at its lowest when the batter is hot. Then during the charging process it will self cool down. Then the IR comes back up. Iv done all kinds of test over and over again. The best thing is to find some good batteries buy a few. And use those for your main packs. Shorty packs will always have high IR because of the size and design of the cells. Getting HV cells are better in the IR numbers. They are a better grade of cells. You don't have to over charge them.

  • @kurtwenger5883
    @kurtwenger58836 жыл бұрын

    I would advise changing pinions first, not timing. There is usually a timing that is the best balance of RPM and Torque (around 35-50 degrees usually) and I don't vary it.

  • @AnthonyM1

    @AnthonyM1

    6 жыл бұрын

    But 35-50 is a variable

  • @TheRCNetwork

    @TheRCNetwork

    5 жыл бұрын

    The Coach has spoke

  • @bradlee5277
    @bradlee52773 жыл бұрын

    can you do a video explaining gearing please?

  • @superjoint57
    @superjoint575 жыл бұрын

    What did you use for the “rods” on the resistor discharge device? Thank you!

  • @robertmoore119
    @robertmoore1196 жыл бұрын

    What's up Ryan, good video. The part with the motor analyzer is the part I enjoyed the most. I had a question, Im sure I could check some rules and find the answer to my question somewhere. The last time I was racing, NIMH were the hot batteries and we still had brushes. I raced stock class 2wd. The motors came with bushings and you couldn't run bearings. Ive been planning on getting back into racing. The New brushless motors come with bearings in 17.5 and 13.5. My question is can these bearings be upgraded? ie, higher abec? Or different material?

  • @robertmoore119

    @robertmoore119

    6 жыл бұрын

    Well I googled and answered my own question. Bearing upgrades are allowed, so are rotor changes. I was aware Of the tuning rotors, but not aware of the rules about bearings. Which is information Im glad to have found. I like the idea Of being able to take something that came one way and change it too my liking. That can make it more difficult for the novice to keep up however. Too be honest, in stock class, I always had the hp, I just didnt have the consistency I would have preferred. Looking forward to getting back into racing after a long break. Back then I was much faster driving my competitors vehicles who always seemed to grab spots 1 and 2.

  • @alvisgineika9306
    @alvisgineika93066 жыл бұрын

    For Batteries Try CS-Electronic the 7600 2S2P is good but depends what you use it for Regards

  • @jguillermoii
    @jguillermoii7 ай бұрын

    Hey Ryan, do you think 13.5t is too kucb power for thr Tamiya C11? Not racing. Thanks!

  • @bensp1193
    @bensp11934 жыл бұрын

    Hey Ryan. Love all your videos. Easy to follow and educative. Quick question. 150 degrees does it with or without fan on motor? Thank

  • @bretttuley6537
    @bretttuley65374 жыл бұрын

    Could you keep your battery warm with a heater (pants pocket, warm rice bag, temperature controlled container) rather than through fast discharge/charge cycles?

  • @codywichman213
    @codywichman2136 жыл бұрын

    Can you make a video about b64 setup up. And all the cool stuff you did to hop it up

  • @RyanHarrisRC

    @RyanHarrisRC

    6 жыл бұрын

    Already done my friend! Check my recent videos

  • @stumason7003
    @stumason70036 жыл бұрын

    My tips Get a current gen. Motor Get a silicon graphene battery Charge battery at 2 amps above 3C Rebuild shocks between each race day Make sure your car is straight and not bent Alignment Get a body that’s right for you Good tires Get wide selection of springs Good radio Good tools And finally... DRIVE THE GOD DANG CAR GOOD!!

  • @TheRatchet4234

    @TheRatchet4234

    6 жыл бұрын

    Lol get a motor that works good on your track that people have success with.

  • @gsf2817

    @gsf2817

    5 жыл бұрын

    Add grp tires

  • @MX-CO

    @MX-CO

    Ай бұрын

    Why Rebuild the shocks every time?

  • @MX-CO

    @MX-CO

    Ай бұрын

    The biggest difference I've noticed as a newbie is tires, I was shocked how big of a difference slicks made, I put on a set of Smoothie 2 silvers and they stick to the track like velcro

  • @jackieloggins586
    @jackieloggins5866 жыл бұрын

    cool

  • @wloop7659
    @wloop7659 Жыл бұрын

    Is a capacitor bank against the rules? could help buffer when the amp draw is high

  • @dimagass7801
    @dimagass7801 Жыл бұрын

    Getting back into rc since last time I was like 12 and a 1/10 rc car with no job is impossible with no money, I am wondering if there are any good upgrades for a 1/18scale rc car?

  • @rcjer6473
    @rcjer64735 жыл бұрын

    hey bro I just recently installed a gyro and the gyro worked as far as turning but I had no throttle anymore. so I took the gyro out and connected the normal way without gyro and I still have no throttle. and I tried to calibrate my neutral forward and revers but it wont let me. I have a redcat black out sc pro brushless with a hobbywing wp-10bl60 rtr esc. I tried a new esc also same model and same thing again. no throttle. you seem knowledgeable and I watch you often. maybe you can help me figure this out.

  • @agoodballet

    @agoodballet

    5 жыл бұрын

    RCJer make sure you plugged in the ESC correctly on the RX. Some of the black wired stuff can be a bit confusing.

  • @kidlat1968
    @kidlat19686 жыл бұрын

    hi you seem really knowledgeable about rc motors, can you help me with what 13.5 engine should i buy? i have a budget around $500 aside from the tekin brand what is the best fastest motor there is? thanks!

  • @RyanHarrisRC

    @RyanHarrisRC

    6 жыл бұрын

    The Trinity Monster Max 17.5 & 13.5 motors are my favorite motors! The Trinity 4000mah 2s Shorty White Carbon is my favorite battery. All of them are linked in my description!

  • @Ben_Howard
    @Ben_Howard6 жыл бұрын

    Trinity recommended setting at 4.3a freedraw on a motolyser