Otto. Man, thank you, thank you. Whoever designed this system had no concept of their user base. After watching three of you very clear videos, I was able to reset the limits on my two shades. Each required the 3-8-3 second power cycle reset, followed by the remote sequence you describe. There is no way I would have been able to do it without you.

Awesome and thorough instructions! Thank you

This video is awesome! It saved me having to buy a new blind for $$$. Thank you so much.

Thank you. Clear, helpfull & to the point!

Very helpful, thank you! 😊

Now I learn how to program sumfy remote...thanks your video.

Very helpful, many thanks Otto

You are a lifesaver! Thank you very much.

شكراً سيد أووتو شرحك واضح وسهل اتباعه 😇 Thanks Mr. Otto very easy instruction to follow and helpfully

Perfect, saved me, thanks

Thanks mate, you saved me a lot of time.

Thanks!

@motoriseit

Жыл бұрын

Thank you for the tip - much appreciated!

I have two blinds operating from one remote with 4 channels. All was working well but something happened and I had to reset the limits. Now the 5 channel when both blinds operate together does not work I've tried to program this to reprogram the channel. The blinds are battery operated

@motoriseit

3 жыл бұрын

Hi Ranbhere, when you reset the motor, you need to re-create the group channel, as that channel isn't created automatically. So if channel 1 operates blind one, press prog until the motor responds (jogs), next, go to channel 5 and press prog again. the blind will jog and you can now operate blind 1 with channel 1 and 5. Wait 5 minutes and repeat the procedure for the next channel and start with the channel you want to add to the group channel. Here's a video that shows this procedure: kzread.info/dash/bejne/f4antM99fdqWZrw.html good luck, otto

Nice clear instructions….nice not to hear “ whats up guys” at the start of the video 🙄…..thank you