How to program a GMC Yukon remote key fob 1997 - 1999
Автокөліктер мен көлік құралдары
An easy to follow video on how to program a remote key fob for a 1997 - 1999 GMC Yukon.
More free keyless entry programming instructions available at www.ProgramYourRemote.com/
1. Locate Data Link Port. It is located under dash on drivers side. Be sure you know which pins are 8 and 4.
2. Make sure there are metal contact pins in terminals 8 and 4. Connect 8 to 4 with a suitable jumper wire ( leave the jumper wire connected throughout the programming procedure). Make sure you know which terminals are 8 and 4. The vehicle will respond by locking and unlocking the doors to signify entering of programming mode.
3. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed and after about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release buttons on remote.
4. Within one minute, repeat step 3 on the remaining remotes to be programmed.
5. Remove jumper wire applied to OBDII port.
Пікірлер: 28
Awesome and very precise step by step lesson. I'm a licensed locksmith and your vid was spot on.
@PYR-Auto
3 жыл бұрын
Thanks!
Excellent video. Thanks!
@PYR-Auto
2 жыл бұрын
You're welcome!
Very helpful!!! Appreciate the video
@PYR-Auto
7 ай бұрын
Glad it helped!
doors lock and horn beeps. Alarm will not sound when you open a door. What to do?
It works out!!! ❤
Thank you sir about your information . Once i take wire to conecred with obd . Am not found any improved no respand from sentor lock . So what dose it mean ??
@PYR-Auto
4 жыл бұрын
If you are getting no response after inserting the wire, there is a good chance the vehicle is not set-up for factory remotes.
@alghamdi9999
4 жыл бұрын
@@PYR-Auto Thank u sir for your feed back Can u please give me the idea What can i do ?
@alghamdi9999
4 жыл бұрын
@@PYR-Auto I will tell u what happen with my car from the begining Ihad smole accedent on driver door after fixed i face the issue I go to elicteric tech to solve the issue he side every thing fine axepet one insturment device is name : remote function control modual no power . So u have to replace with new one After that i bering the same devise and also not woking today i breing another one and i will see if there is improve or not and then i will ahere it with u . Thanks alote .
@thepeoplesreviewer7164
3 жыл бұрын
You may have a blown fuse. If you check fuse diagram you'll be able to find keyless module fuse. Once found, inspect and replace. NOTE: fuse may look fine but don't be fooled, replace it anyway. Then try to program with jumper wire again. Make sure you are programming correct remote as there are many look alike remotes but for different years and models.
@alghamdi9999
3 жыл бұрын
@@thepeoplesreviewer7164 Thank you my dear i replace the cntrol locke inside dach pored and then sys back to normal thank you sir 👍
Need help on 01 yukon the hold the unlock button don't work, hear it enter program mode
@PYR-Auto
2 жыл бұрын
If the vehicle is entering programing mode but the remote is not responding, there may be an issue with the remote you are using.
My vehicle enters the programming mode but doesn’t do anything when I hold down the unlock and lock buttons
@PYR-Auto
2 жыл бұрын
If the vehicle enters programming mode but will not respond to the remote - there may be an issue with the remote you are using
@Dewaynemckynzi
7 ай бұрын
I had the same problem at first. Try a different remote
@chris1k_
7 ай бұрын
@@Dewaynemckynzi yes that worked I had the wrong key number or something ended up getting the right key number
Mine does not have the 8th pin It has the slot but it's blank
@PYR-Auto
4 жыл бұрын
That indicates that the vehicle does not have the factory remote option.
@WhoIsAktive
3 жыл бұрын
@@PYR-Auto what does that mean?
Do I need to turn on the car ?
@PYR-Auto
Жыл бұрын
no
نبغا تشغيل عن بعد جمس 1995
@PYR-Auto
4 жыл бұрын
This will not work on a 1995 Yukon.
@user-lk9vc9jh1m
3 жыл бұрын
هاذا امريكي ما يعرف عربي