This is legit. Programmed my 99 Tahoe, my girlfriends 97 GMC Suburban, and my moms Silverado! This channel is great!

@PYR-Auto

Ай бұрын

Glad it helped!

Thx for the video, I can't believe there is not a single paper clip in my entire house

@AFatherToTheFatherless

6 ай бұрын

LOL I was in the same boat about a decade ago. I bought a whole pack and I still have them 10 years later

Worked absolutely marvelous took my 99 remote programmed to my 97 within seconds

@PYR-Auto

14 күн бұрын

Nice!

Perfect...worked exactly as you showed for my 1997 Tahoe.

@PYR-Auto

4 жыл бұрын

Cool!

Great information ,Maryland showing ❤️

@PYR-Auto

3 жыл бұрын

Thank You!

Thank you very much for your time. Video was extremely helpful. Got two key fobs from Amazon for less than $30 and programmed them both. Can of corn.

@PYR-Auto

2 жыл бұрын

Nice! You're Welcome

Thanks man. Great cut to the chase video. Perfect. Worked great.

@PYR-Auto

Жыл бұрын

You're Welcome! Glad it helped

Thanx! Worked like a charm.

@PYR-Auto

2 жыл бұрын

You're welcome!

Great video, thank you!

@PYR-Auto

8 ай бұрын

You're welcome!

This worked for my '97 tahoe.

@PYR-Auto

4 жыл бұрын

Great!

Awesome thanks a lot!

@PYR-Auto

Жыл бұрын

You're welcome!

thank you ,,

@PYR-Auto

2 жыл бұрын

You're Welcome!

have a 96 Tahoe 2 door Sport, power everything, fancy seats. Should have keyless. What is the clue it may have been equipped? This vehicle shares not much of anything with the 4 door Tahoe series, which began same year. 2 door was end of line in 1996, prior design, electrical. They share 5.8L and therefore the same ECM. BCM? not sure. I saw a reference about glove box sticker. Asked dealer to look up VIN and he said NO, not equipped. Is there a electrical box object under dash that controls the keyless I can hunt for?

I am trying to program the remote for my 97 Chevy Express van. I have a paper clip that I connect to ports 4 and 8 on the OBD connector. After I plug in the paper clip to ports 4 and 8, there is no response. The door locks are supposed to cycle and then be put into programming mode but they aren't. What am I doing wrong?

@PYR-Auto

3 жыл бұрын

It sounds like the vehicle may not be set-up for factory remotes

Thanks for that that was easy can you do one on changing the cigarette lighter to a USB quit charging

@PYR-Auto

2 жыл бұрын

Ill keep that in mind!

Where do you buy a replacement remote to go with your existing one ?

@PYR-Auto

3 жыл бұрын

I would recommend checking out bit.ly/CarAndTruckRemotes.

Hello, the truck must be with the key in ignition or no?

@PYR-Auto

3 жыл бұрын

No, you don't have to have the key in the ignition.

Hello, I have carried out the entire procedure but it does not work on a 1997 and a 1998 Chevrolet Tahoe. When puncturing pins 4 and 8 of the OBDII connector, the central locking closes and opens, but then when you hold down unlock and lock for up to 60 seconds, it does not work. nothing happens. The controls are with new batteries. What could be happening or missing?

@PYR-Auto

2 жыл бұрын

If the vehicle is going into programming mode but not responding to the remote - there may be an issue with he remote you are using

I have a 1995 suburban. The obd port only has 12 pins, 6 on top and 6 on bottom. I have done a lot of research trying to program a key fob but nothing works. I cant get the truck to go into programming mode. Maybe you can help?

@PYR-Auto

4 жыл бұрын

This procedure does not work on a 1995 Suburban but you can find those programming instructions here www.programyourremote.com/classified/1995-chevrolet-suburban-keyless-entry-remote-key-fob-programming-instructions-listing-6326.aspx

@thomascunniff6739

4 жыл бұрын

@@PYR-Auto I looked at the sticker in the glovebox and it didn't come with factory keyless entry. When I bought it he gave me a key fob with it so I just assumed it did.

@renesmythe9095

2 жыл бұрын

My 1995 GMC K2500 Suburban does NOT have keyless entry & it has OBT1, not 2...

I need to program a key do you have a video for that I have a 1996 Tahoe

@PYR-Auto

9 ай бұрын

1996 tahoe does not use a chipped key - so no programming is needed

I have a 97 Silverado and the 4 and 8 are there but my remote is not responding is there a certain remote I need

@PYR-Auto

3 жыл бұрын

Yes it needs to be compatible with the original factory remote

Will it work even if I don’t have the power window ?

@PYR-Auto

3 жыл бұрын

You just need to have the factory remote option installed - not all did in those years

So i held both buttons. After 20 seconds I heard the cycle. But then i try locking it or unlocking. And it wont work

How do bye the correct Remot for my 96 chevy tahoe LT 4x4

@PYR-Auto

3 жыл бұрын

I would recommend checking out bit.ly/CarAndTruckRemotes.

So I just bought a 98 Tahoe. It did not have a remote at all when I bought it. Can I still get a remote and program it to the truck?

@PYR-Auto

4 жыл бұрын

Yes, but the truck needs to have the factory remote option. Not all did in those years.

@djh254

4 жыл бұрын

Program Your Remote ok. Thanks for reply. How can I tell?

@PYR-Auto

4 жыл бұрын

@@djh254 If you look at the connector under the dash that's shown in the video, there will only be pins in the slots 4 and 8 if the vehicle is set-up for factory remotes. You can also take your VIN # and call a GM dealership's parts department and they can look of the original build sheet for the vehicle and see if it has that option.

@involucradosperformance

3 жыл бұрын

@@PYR-Auto you can also check in the glove box there are some equipment codes and the code for keyless entry is “AU0” if it’s there then it’s equipped with it

@gldixon86

2 жыл бұрын

Ok I have a 99 gmc suburban with the Au0 code doors cycle but when I do the buttons on the remote NOTING they don’t connect an I got new ones from Amazon??? Plz help

My locks don’t cycle after jumping the connection. What can I do?

@PYR-Auto

3 жыл бұрын

it sounds like your vehicle may not have the factory remote option

Can I buy a universal remote and do this

@PYR-Auto

4 жыл бұрын

No, this is procedure is factory remotes only

😂Awesome Possum 🎉🎉

When I did it on my 1996 suburban I connect the wire to start the cycle but my remote key will not connect to it or it will not response at all

@PYR-Auto

3 жыл бұрын

Are you sure your Suburban has the factory remote option? Not all did in 1996

@roygonzales8290

3 жыл бұрын

I just figured out it has a silencer security system on it already

@roygonzales8290

3 жыл бұрын

Ima have to order a replacement remote key for it

I’m not sure why but it didn’t work on my Tahoe. Paperclip cycles the locks, but the fob didn’t work. I opened it up and made sure it wasn’t a battery issue. Not sure

@PYR-Auto

3 жыл бұрын

Since the vehicle is entering programming mode it does sound like an issue with the fob iteself.

@dumbledoresarmy7569

3 жыл бұрын

@@PYR-Auto I believe they sent me the wrong fob (eBay) I have a 2000 Tahoe z71 but they sent me one for the regular 2000 Tahoe when the z71 still has the obs body style. I believe that is the issue.

@louiegary

6 ай бұрын

When I’m in the programming mode, I’m unable to program the second remote. I Waited 2 minutes and nothing..

Small paper clip or big?

@PYR-Auto

Жыл бұрын

probably bigger

نبغا تشغيل عن بعد يوكن 1995

I have a 2000 tahoe the paper clip wont work it dosent cycle the lock for pair mode and i tried the unlock an turn key twice and it dosent work PLSSS help

@PYR-Auto

2 жыл бұрын

It sounds like your truck may not have the factory remote fob option

This worked for my 1998 gmc Yukon slt but did not work for my 1996 Chevy Tahoe LS. ☹️

@PYR-Auto

4 ай бұрын

The Tahoe may not have the factory remote option

نبغا تشغيل عن بعد جمس 95

Paper clip didn’t send it into programming mode. Put it in to 4 and 8 but still got nothing…

@PYR-Auto

2 жыл бұрын

Sounds like your vehicle may not have the factory keyless remote option

1995 and 1996 have a good more rectangle remote not this rounded one. Late 95 had obd2 and all 96 had obd2. The remote in video is for use in 1997-98 trucks and 97-2000 suv. Please update video.

@PYR-Auto

4 жыл бұрын

The style of the remote does not indicate what programming procedure is used, the years are correct as listed.

When I did these the remote didn't work but now my doors are not working to lock

@PYR-Auto

4 жыл бұрын

When you insert the jumper wire into the correct slots, are the door locks cycling?

Mine doesn't honk

Bought a new remote and it didn't work.

No luck at all. Tried it on a 2000 Escalade and as usual with that car, nothing worked.