شكرا لك ياطيب

Bought a keyless entry key fob (2-pack) for my 2011 Chevrolet Malibu about 5 years ago and was able to program them myself without any issues. Came online now (5 years later) to remind myself how I programmed it before and everything is saying “dealer or locksmith required”, which I know from personal experience is BS. So, did some tinkering and figured it out. Get in car with key and keyless fob, close all doors, insert key into ignition and turn to On position without starting car (radio/lights will be on), now hold down both lock and unlock buttons on keyless fob until the horn honks twice, then release the keyless fob buttons and turn the key the rest of the way to start the car. You should hear the horn honk twice again and that’s it, programming complete. Hope it’s as easy for you as it was for me! Not sure if they eliminated the self program feature from the newer key fobs or what, but definitely don’t need a dealer or tools for the older ones.

@BestCarFixes

Жыл бұрын

thank you for your tech support

@angelaldacoaa

Жыл бұрын

The guy commenting might sell these key fobs on amazone cause they copied and paste this comment on other videos probly tryna get people to just go buy one of theirs

@vinnymedina4039

5 ай бұрын

@@angelaldacoaayeah I thought the same thing.

He didn't do it right, you have to hold the unlock button while cycling 5 times then your door's will cycle letting you know you in program mode hold the lock and unlock on remote for 1 minute or until they cycle by themselves once done check button's and it's complete for on boarding

@BestCarFixes

Жыл бұрын

Thanks a lot for your help

So do I need to buy the same machine you have for my remote to work?

@BestCarFixes

2 жыл бұрын

no there is a lot of different tools in the market see what you can buy