Handy hints on preparation required to get a good re-point on a terracotta tiled roof. By: www.theroofingprofessionalswes...
Жүктеу.....
Пікірлер: 13
@Benzknees11 жыл бұрын
If the new mortar is just applied as a thin layer onto old pointing, it'll crack and spall off in no time atall. You need to rake out the old mortar to form a key, assuming it is reasonably sound. If it's loose or badly cracked, then you'll need to completely remove it, possibly inc
@jamsandwich61422 жыл бұрын
I love widge caps
@dgb582011 жыл бұрын
Great footage
@neiltreloar11 жыл бұрын
Cowboy! Take the ridges off and re-bed them using good 3&1 mortar.
@dylangale5577
Жыл бұрын
It’s all about explaining to home owners the process. Not everyone wants to rip people off with a full rebed and point mate. If you can’t physically remove the ridge from the old mortar it’s fine to clean and over point and mind you more cost effective and appealing to the home owner
@Starlight01212 жыл бұрын
@TheCrazyturnip "what do you mean rake out the motor?" I have similar situation on my roof here that require re-pointing. What i'm about to do it, rahter then using a wire brush I'm going to apply some anti-fungi detergent all around the crack area then high pressure clean using 3000 psi spray gun then do then apply the flexi-pointing . how's that sounf? hope it work.
@kyle212121
Жыл бұрын
So 11 years later. How’d it work out for you with the new re-point after detergent ?
@jaimejaime38503 жыл бұрын
Did u repoint on top of the old existing bedding?
@dylangale5577
Жыл бұрын
If you can’t lift the ridge capping from the old bedding it will be ok to clean and repoint over the top. The old bedding is only cement with a oxide mixed through. If you can get away with just an “over point” it’s easier and more cost effective for the home owner
@francisbalfour43549 жыл бұрын
Thort you said it was terrachotta repaint then, was like. U got to be joking me, do t paint terrachottas -.- unless they don't know who you are, then go ahead hahahaha
@jacksmith43753 жыл бұрын
Cowboy
@jackharvey64527 жыл бұрын
So many people talking shit about a blokes work. Perhaps the reason he didn't strip and re bed all the hips is because the customer didn't want to pay for it. I'm a roof tiler, and if there customer doesn't want to spend the money well, they get a shit job
@jacksmith4375
3 жыл бұрын
And if they don’t wanna proper job walk away certainly don’t post yourself on internet doing shoddy things
Пікірлер: 13
If the new mortar is just applied as a thin layer onto old pointing, it'll crack and spall off in no time atall. You need to rake out the old mortar to form a key, assuming it is reasonably sound. If it's loose or badly cracked, then you'll need to completely remove it, possibly inc
I love widge caps
Great footage
Cowboy! Take the ridges off and re-bed them using good 3&1 mortar.
@dylangale5577
Жыл бұрын
It’s all about explaining to home owners the process. Not everyone wants to rip people off with a full rebed and point mate. If you can’t physically remove the ridge from the old mortar it’s fine to clean and over point and mind you more cost effective and appealing to the home owner
@TheCrazyturnip "what do you mean rake out the motor?" I have similar situation on my roof here that require re-pointing. What i'm about to do it, rahter then using a wire brush I'm going to apply some anti-fungi detergent all around the crack area then high pressure clean using 3000 psi spray gun then do then apply the flexi-pointing . how's that sounf? hope it work.
@kyle212121
Жыл бұрын
So 11 years later. How’d it work out for you with the new re-point after detergent ?
Did u repoint on top of the old existing bedding?
@dylangale5577
Жыл бұрын
If you can’t lift the ridge capping from the old bedding it will be ok to clean and repoint over the top. The old bedding is only cement with a oxide mixed through. If you can get away with just an “over point” it’s easier and more cost effective for the home owner
Thort you said it was terrachotta repaint then, was like. U got to be joking me, do t paint terrachottas -.- unless they don't know who you are, then go ahead hahahaha
Cowboy
So many people talking shit about a blokes work. Perhaps the reason he didn't strip and re bed all the hips is because the customer didn't want to pay for it. I'm a roof tiler, and if there customer doesn't want to spend the money well, they get a shit job
@jacksmith4375
3 жыл бұрын
And if they don’t wanna proper job walk away certainly don’t post yourself on internet doing shoddy things