Great and tidy finish mate. Top work 🙌🏽🙌🏽

Looks better to work with then nutech maxi point, what brand was this?

Good video, very helpful. Put some more vids up so us DIY's can save a buck!

@dazaussieguy1954

3 жыл бұрын

its so easy to do but on the roof the hardest u have to walk on the joist on the tile concrete bunnings cost $29 15 litres

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

@demetriusjohan5899

3 жыл бұрын

@@dazaussieguy1954 Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

Those tiles must be rock hard .. standing on the top course & valley cuts. Not many trowel marks by the looks of it .. don’t forget to poke the top ridge.

Any videos on putting the mortar around roof piping?

Beautiful finishing

Mate u made that look easy soo smooth finish

@Abu7929

Жыл бұрын

Keep at it mate and the penny will drop and you'll find that all of a sudden you can point. Now it's warming up make sure you keep your bucket mixed between every butter up

so bloody neat

Very nice job! if the mortar is not cracked, do you still recommend applying the flexible pointing ?

@Abu7929

Жыл бұрын

Only if you are re-coating as we were on this one, otherwise I'd leave it alone.

Do you not grind back Ridge edge for a more permanent bond . We see many new houses with pointing separating from Ridge tile from not at least wire brush or grind first

@Abu7929

2 жыл бұрын

Don't know what you mean by that mate. New houses have a fresh bed, there is nothing to grind back. On this one it's been pressure cleaned, the existing pointing was sound. If it isn't a re-bed we either pressure clean or wire wheel for repoints.

what flexi pointing brand you are using? any recommendation? Do you have to rake the bedding under the ridge tiles to create a strong bonding?

@Abu7929

3 жыл бұрын

That was Starpoint but I don't worry too much about it I use most brands. If it's new I run a key beneath the cap but for a repoint just make sure it's clean, either pressure wash or brush. Sometimes you may have to grind yourself an clean edge too depending on how wild the old pointing is

@wheredoigofrhere

3 жыл бұрын

@abu7929 Thank you so much for your response. My roof is old and they didn't do flexi pointing back then, just motar. Now got all the crack and the bedding is currently not cut back( vertically )so you can apply the pointing (creating an angle for water running off) and like you said when bedding is freshly done, we can a screw driver/key to run along under the ridge tiles or hip tiles. How we do it with the old existing motar? Do you recommend the mix(like motar and pointing) to fix up crack or missing motar but the motar bond is still strong. I got Selley's pointing from Bunnings. Not use yet but ppl said its not creating a smooth surface. Have you tried them? Would you recommend Monier?

@Abu7929

3 жыл бұрын

@@wheredoigofrhere Yeah Selley's is fine. If there's missing chunks of mortar you will have to tuck bed it before you point. So make up a 3:1 yellow bricks sand:cement mix and tuck that in with your trowel, then when it goes off you're ready to point. As I said, pointing should be clean, and if there's any problem with getting a seal with your trowel along the cap edge you will have to grind it back, have a look at cup grinders at Bunnings

@wheredoigofrhere

3 жыл бұрын

@@Abu7929 Thank you so much brother. You are the man👍

Good video showing proper technique and a neat finish. Thanks for sharing=)

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

@johnrb9397

Жыл бұрын

@@demetriusjohan5899Amen.

@sorrowinchrist3387

11 ай бұрын

@@demetriusjohan5899 Are you going to help rather then just chatter? Your words are dead with out action man.

Nice Job mate

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

Excellent work guys I absolutely love your work. Can we have tips for using trowel? Does it need to have that flat bottom?Mines ones are rounded tip or pointed tip? Is the selley’s pointing similar to apply? with cracked missing mortar do I clean out loose mortar, brush aways dust etc then force mortar in with trowel and let cure then point over it with flexible pointing as shown after I’ve ground ridge tiles cleaned etc? Cheers.

@Abu7929

6 ай бұрын

Selleys is fine. They all differ a bit but same principle. We use gouging trowel, rounded at bottom. Over time they just get worn with use and can look a bit flat. If there is anything loose or rough we use a cup grinder to grind top edge of all ridges before pointing. Yes, always either pressure wash or brush/blow when repointing. If old mortar is very bad, ie bits of bedding falling out everywhere, you likely will have to rebed

@Abu7929

6 ай бұрын

No I rarely go over same spot twice with pointing. Only necessary if you get a weird angle, sometimes happens on gable ends or apex's. Just butter up thicker. You will be able to see if it's innapropriate; if gap is too big then you will have to either fully rebed or tuck bed

Bro quick question. Did you leave any "weep hole" when repointing? I'm doing DIY job for my house just wanted to clarify. Thank you.

@Abu7929

2 ай бұрын

Yes you can see there are weep holes in the ridge. After we point and it goes off we go back and poke the holes through. If your ridge doesn't have weepholes either leave it alone and just point or drill them in with a long 6mm hammer drill.

Is there any problem with covering the weep holes with pointing?

@Abu7929

6 жыл бұрын

Before the pointing goes off the weep holes are poked back through. They are necessary to let water escape when the pointing invariably develops cracks in the future

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comment

So hard to find those rubber boots in New Zealand 😢

Thanks for sharing you nice work. Except I thought you supposed to get a matching colour ?

@Abu7929

3 жыл бұрын

In this case the roof is being sealed and re-coated so the colour of the pointing isn't important

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

Nice job mate, very tidy. What brand of pointing do you use? Cheers 👍

@tomaxiomroofrestoration9259

3 жыл бұрын

Star point in this case mate

@MrJFoster1984

3 жыл бұрын

@@tomaxiomroofrestoration9259 Thanks

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

@demetriusjohan5899

3 жыл бұрын

@@tomaxiomroofrestoration9259 Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

@demetriusjohan5899

3 жыл бұрын

@@MrJFoster1984 Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

Perfect work mate. If u seen my work youll freak out lol

@Abu7929

5 жыл бұрын

Pointing's one of those things that looks easy but takes time to get it right.. keep at it bro, if you're not improving get someone to show you again

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

Anybody use Dunlop flexible repointer? I tried it today and it wouldnt stick to anything no matter what we did

@frenchiefrog1564

3 жыл бұрын

Fuck i m just using the selleys one, same problem man and it s not even wet like this one in the video, take me ages to smooth out. Even tho when i did scrap ridges cleaned it and blew it up. Got to put in strength when you apply it i guess but yeah not ideal

Ive been a roofer for 30 yrs ,That is a Monier Elbana Tiles .Im just wondering why you arnt matching the original Color & why is it being Repointed its looks fine .

@Abu7929

4 жыл бұрын

It's being restored, so the colour isn't important, we point before we paint. With jobs like this pointing is left to the customers discretion, a lot of people want it done because they want the job to be 100%

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

@pauloconnor7951

18 күн бұрын

@@demetriusjohan5899 With respect to you. Is this response an automatic circuit ?.

you make look easy bro lol i'm an apprentice

@Abu7929

3 ай бұрын

Don't over think it. Once you get it you'll get it. if it feels hard it's wrong, if it takes too long it's also probably wrong.

That compound looks much easier to spread than the stuff I got. Did you add anything to it to make it softer or is that how it came straight out of the tub? What brand is it?

@tomaxiomroofrestoration9259

3 жыл бұрын

Straight out of the tub. Make sure you mix it heaps with your trowel regularly. This is star point. Some of them are better than others.

@stevemumbling7720

3 жыл бұрын

@@tomaxiomroofrestoration9259 Thanks mate. Any recommendations?

@tomaxiomroofrestoration9259

3 жыл бұрын

@@stevemumbling7720 I'd say star point, flexipoint and dunlop are the pick of them. Dunlop available at Bunnings

@stevemumbling7720

3 жыл бұрын

@@tomaxiomroofrestoration9259 Magic. Cheers.

If thats an apprentice than good job anyone above 2nd year that's not far off the slowest an thickest pointing I have ever seen

@Abu7929

4 жыл бұрын

Yeah OK mate. Give us a link to yours

@jakeoshea7844

4 жыл бұрын

@@Abu7929 then again for painting over it I havnt done so I don't if it's gotta be thick or not but yeah I don't video myself pointing man got some pics if ya really wanna see them haha

@brendan4401

3 жыл бұрын

@@jakeoshea7844 What? Is English your third language or something?

@frenchiefrog1564

3 жыл бұрын

@@Abu7929 lol it take me twice this time, you re doing good

good one

very good one, thanks for sharing!

@demetriusjohan5899

3 жыл бұрын

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments

I'll attempt this but my back is gonna die a horrible death. I guess a bit each day is the key.

@Abu7929

Жыл бұрын

Most people struggle with something, mostly back, often knees, feet, etc when starting out There are different techniques you can try to make it more comfortable. One of the boys sort of sits beside the ridge as he points as opposed to leaning over it

hey bro i’m boss said it’s the wrong colour pointing if u need a colour chart i can send u a star point colour chart

THERE POINTING OVER CRACK TILES THERE DON'T YOU REMOVE THEM BEFORE TOPPING GUYS

So nice job ! What is black on top cement ?

@Abu7929

6 жыл бұрын

That's the pointing. The pointing is what secures and waterproofs the cap, the 'cement', or bedding, only positions them.

@elenakurus2010

6 жыл бұрын

How you mix this pointing ?

@Abu7929

6 жыл бұрын

You don't mix it, it comes ready, it's called flexible pointing. This has been used for 20+ years because of it's durability and flexibility. Some manufacturers of this product include Flexitech, Selleys, and CSR. In the past a 3:1 cement mix + lime + coloured oxide was used

@sharons9367

6 жыл бұрын

Hi the pointing does it come in different colors ? Or can you color the product please ?

@Abu7929

6 жыл бұрын

yes it comes in different colours

really u went over the old concrete thats bullshit u suppose take the old broken concrete of then re do it dirt wood

@floydgraveling3256

3 жыл бұрын

only if it is falling apart does it need a rebed, if the ridges are solid not moving, no lose mortar etc. cleaning and applying flexipoint will still work aight

Didn’t even need repointing .

@Abu7929

3 жыл бұрын

Not really it's up to the customer, they usually want it done

Those ridges should be bedded with a butt joint instead of overlapped. It's why the mitre looks so rough

@Abu7929

5 жыл бұрын

I take it you mean the collars? This job is a re-point, we are going over old work, the finish of the new pointing is limited to some degree by the quality of the original. I take it you're not in Australia? There isn't much convention here of doing butt joints with concrete caps, almost all existing work and the majority of new see the caps lapped in this way. Butt joints are good too but they require obviously a secret gutter etc, more can and will go wrong unless. I see no advantage aside from aesthetics which is objective.

@al4840

5 жыл бұрын

Mate you only but ridge flat tiles

ITS CALLED A PATCHED UP JOB GUYS THE ROOF STILL DIRTY

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer request put in comments And if your family has any prayer requests to

Romans chapter 10 verse nine if you declare with your mouth Jesus is Lord and believe in your heart that God raised him from the dead the Bible says you will be saved Jesus loves u Any prayer put in comments