How to Power a Dash Cam With a OBD-II Port - Thinkware OBD-II Power Cable
Автокөліктер мен көлік құралдары
#DashcamOBD-II #Dashcaminstallation #Hardwiredashcam
Thinkware OBD-II Power Cable: ca.thinkware.com/product-page...
0:00 Introduction
0:24 OBD-II Installation
0:51 Enable Parking Mode
1:17 Changing Vehicles
1:28 Outro
Visit the Thinkware Dashcam Official Website | Site Visiter notre site officiel:
bit.ly/23gkk3o
Like Us on Facebook | Aimez-nous sur Facebook: on. 1pPqhwE
Follow Us on Twitter | Suivez-nous sur Twitter:
bit.ly/1t5DSFf
Follow Us on Instagram | Suivez-nous sur Instagram:
bit.ly/1tFM1RJ
Пікірлер: 91
Thanks for posting!
@thinkwaredashcam
3 жыл бұрын
No Problem 😊
Hi there, it seems to be out of stock in the link, do you know when it will be restocked?
Hi, Firstly this is a question related to another brand of Dash Camera, I have a FineVu GX-300, I am thinking of hard wiring it, but now just stumbled across this little gem of an idea, as reluctant to use add a circuits as they never sit correctly. I am seeing that this lead has the same single pin connector that the FineVu also runs for power, not a Mini USB style, I am wondering if there is anyone out there that has used this OBD Plug set up on a different Camera.
Does it work with the radar as well .?
Great thanks
which is good obd installation or hardwiring
I have one concern on the thinkware obd cable. It uses more pins than power pins, it should be only 2 pins just like iroad obd cable. Can you please advise the reason of using these exta pins?
Hi Thinkware.. what is the maximum current rating this cable can supply on 12v . ?
I have just bought the u1000 with radar sensor & ivolt external battery, Can I use the obd option with the ivolt external battery & the radar sensor instead of hardwiring ?
@thinkwaredashcam
3 жыл бұрын
No, The ivolt mini does require you to either connect to an ACC fuse or use your 12v outlet.
does it has 3 cables similar to the fuse tap wiring kit the ACC, POWER and ground?
@thinkwaredashcam
3 жыл бұрын
Hello Joenas! The OBD Cable provides ACC and Constant power by just plugging it into the OBD Port.
I have F770 and the old Cellink B battery hardwired to my fusebox for about 4 years. Is it possible to get the external battery connected on OBD 2 instead of hardwiring it?
@thinkwaredashcam
3 жыл бұрын
Hi There, unfortunately, you won't be able to use the OBD Cable with the external battery.
I'm looking for a dash cam solution. I want something to cover front/back and internal. Thinking about getting the Vantrue N4 Three Channel Dash Cam. Not sure what would be best
@thinkwaredashcam
Жыл бұрын
Hi, Matt! Thanks for checking Thinkware Dashcams. We offer different types of dash cameras (Front camera, Front and Rear camera, Interior camera). Feel free to check on our website to learn more about our products. thinkwarestore.com/
Hi. I just got the u1000, will this Thinkware OBD-II Power Cable work with my dash cam? Is there only one Thinkware OBD-II power cable?
What is the s-p mode switch on the OBD plug for? Can't find any mention of it in the manuals.
@beaverprey
11 ай бұрын
Answered my own question. It's on the side of the box. And here I was reading the manual; silly me. P is parking mode ON, S is parking mode OFF.
is it gonna drain the battery if i use this obd cable compare to a traditional cigarette plug?
@human_hope
Ай бұрын
Did you find out the answer?
Does this work with BMWs? M2 specifically. thx
@thinkwaredashcam
2 жыл бұрын
Hello John! Yes, the Thinkware OBD-II Power cable should work with no issue, with your vehicle model!
Do you have to use parking mode when using the OBD cable or can you use it as just a power cable
@thinkwaredashcam
4 ай бұрын
Hi! The OBD II Cable enables the parking mode feature of the dash cam.
Differences between this and the echo master besides the obd port forward?
@reyfelix6249
3 жыл бұрын
i realize I'm kind of randomly asking but do anyone know a good website to watch newly released series online ?
@finneganyahir6868
3 жыл бұрын
@Rey Felix I watch on flixzone. You can find it on google :)
OBD-2 port on 2020 Honda Odyssey doesn’t supply voltage to Dash cam…………. Any suggestions? Thank-you.
@thinkwaredashcam
Жыл бұрын
Hello Paul! If your OBD port cannot provide voltage, we recommend using a Hardwire cable if possible. Thank you.
Great new feature. How significant is the power draw if the car is sitting for one week?
@JokerTheVlad
Жыл бұрын
Get a drone mobile installed, i have one, i start the car up to 3 times a day to charge the batteries when I fly out and gone for 2 weeks.
How does the dash cam know if you've turned off your ignition? It doesn't look like it'll pull any information from the OBD-II port.
@thinkwaredashcam
2 жыл бұрын
Hello there, the power cables, like the OBD or Hardwire cable, are able to detect your battery voltage which is how it determines when your car is turned on or off!
Is this compatible with the 2022 Hyundai Tucson petrol
@thinkwaredashcam
Жыл бұрын
Hello Jamie, Yes this should be compatible.
I got obd connect to my car and my wifi dash cam is on so when I go back and check if it’s recording on my tg card it’s not showing up on the card reader so what do I need to do next
@thinkwaredashcam
10 ай бұрын
Hi there! Have you tried accessing the recordings using the app? You can check here what app to use for your dash cam, thinkwarestore.com/mobile-apps/ You can also reach out to us via email at support@thinkware.com for further assistance.
@alikdouh369
10 ай бұрын
@@thinkwaredashcam to get the 24 hours monitoring to work does the dash camera need to have a parking mode to access the 24 hours monitor.
Like the hardwire cable, will the ODB2 connector stop power being drawn to the camera if the car's battery voltage drops?
@JohnWisden
2 жыл бұрын
"Activates the built-in voltage meter in the main unit which monitors the battery level and automatically shuts off the device if low voltage is detected" that is from their ad, i just bought one
Can you turn off the parking mode? I want to use an obd cable, but I have an enclosed garage and sometimes I don't get to use my car for days and i don't want to drain my battery.
@thinkwaredashcam
2 жыл бұрын
Hi Mike, you can Enable/Disable Parking Mode from the Settings. With Parking Mode disabled, the Dash Cam will automatically shut off when you turn the vehicle off.
@MoChua
2 жыл бұрын
@@thinkwaredashcam Thank you.
@mclukey9037
2 жыл бұрын
@@thinkwaredashcam I have the Echomaster OBD cable in a new 2023 Kia Sportage and my problem is "it won't shut off!" Have tried every configuration thinkable on the app and no luck. Going back to Geek S tomorrow for troubleshooting
@thinkwaredashcam
2 жыл бұрын
@@mclukey9037 Hello! We are sorry to hear about the issue you are experiencing! Are you able to reach out to our support team? We would like to help you with this. (Support Email: support@thinkware.com)
@mclukey9037
2 жыл бұрын
@@thinkwaredashcam Just returned from Geek S trouble shoot and the "new" OBD cable turned out to be defective. Removed, wired with hardwire accompanying dash cam and now shuts when ignition off.
NICE no more cutting into the factory harness which can void factory warranty . Will this work for the Q800 pro ?
@thinkwaredashcam
3 жыл бұрын
Yes, the Thinkware OBD-II power cable is compatible with the Q800PRO.
Will this work with 2014 Tesla model S obd2 port?
@thinkwaredashcam
Жыл бұрын
Hello Lasana, Unfortunately, the OBD power cables do not work with Electric/Hybrid vehicles. If you are wanting the parking mode option, we highly recommend using the Hardwire Cable!
@halcontv
Жыл бұрын
there is an option for electrich/hybrid option for obd in the store
Works in 2021 mustang gt?
@thinkwaredashcam
Жыл бұрын
Hello Maveric, the OBD cable should work as long as you have a fully gas-powered vehicle. The OBD does not currently work with electric/hybrid cars. Thank you!
Every time I plug my obd and then closed the car door and then try to lock the car it won't be able to let me how can h fixed this problem
@thinkwaredashcam
9 ай бұрын
Hi! Please reach out to us via email or phone call at support@thinkware.com or 1 (844) 865-9273 so we can assist you with this. We'll be more than glad to help you out. Thank you!
Hi there! Does hooking up a camera to the OBD2 port drain the battery when the car is off?
@thinkwaredashcam
Жыл бұрын
Hi there! All Thinkware Dash Cams feature the Battery Protection (Voltage Cut Off) Setting to ensure you will not return to the vehicle to a low or dead battery. The Dash Cam will automatically power down once the vehicle's battery voltage level is lower than the selected value for more than 5 minutes.
Is there an app for x700?
@thinkwaredashcam
3 жыл бұрын
Hi There, unfortunately, the X700 is not compatible with the mobile app.
What is the reason behind removing and reinserting the plug three times when changing the vehicle?
@contidozack
2 жыл бұрын
Thinkware. Please answer this question
@nylinamaicrag1867
2 жыл бұрын
It doesnt work mine the obd powercable it doesnt work on the dashcam? What else i can do? It said there just plug in but Dasmcam cant power on
@andreipadurariu5364
2 жыл бұрын
Video is pretty explanatory, why ask pointless questions..
@Knowbody42
2 жыл бұрын
@@andreipadurariu5364 If it's that explanatory, give the time stamp where the explanation is.
What advantages does this have over traditional one?
@thinkwaredashcam
3 жыл бұрын
Our new OBD-II cable is easier to install, plus it's less bulky which makes hiding the wires easier. It's even a little bit less expensive!
@josemerlos334
3 жыл бұрын
@@thinkwaredashcam I was never able to get parking mode working for a U1000 camera. Is this OBDII cable exclusively for parking mode or is it a complete wiring solution, for both continuous & parking mode recording?
@marktraxler6203
3 жыл бұрын
@@josemerlos334 good question. I have mine in my 2019 Ford ranger. I have the older OBD cable and about 4 minutes after I turn the ignition off, it powers down the camera. But once I open the doors, it will power back up. I don’t know why that does that. I thought being hooked up into the OBD port, it would remain on all the time.
@thinkwaredashcam
3 жыл бұрын
@@josemerlos334The new Thinkware OBD-II power cable functions as a power solution for both continuous and parking mode recording.
@thinkwaredashcam
3 жыл бұрын
@@marktraxler6203 Please reach out to our support team and they would be happy to resolve your issue! support@thinkware.ca/1-844-865-9273 🙂
I just order one
What a bout a rear camera? How to do install both?
@thinkwaredashcam
Жыл бұрын
Hello there! We have specific videos on our channel showcasing how to install cabling for front and for rear cameras as well!
Hello. I am planning to use this to my dash cam, but the connector to my dash cam is usb-c. Do you have an adapter to convert it to usb-c? Thanks in advance!
@thinkwaredashcam
Жыл бұрын
Hello Gino, Unfortunately the Dash Cam cannot be powered via USB-C. The power options we currently offer are the 12V Car Charger, Hardwiring Cable, OBD Cable, and iVolt Battery Pack.
@ginocruz8220
Жыл бұрын
@@thinkwaredashcam thanks for reply. Can i use the ivolt battery pack?
@thinkwaredashcam
Жыл бұрын
@@ginocruz8220 You can use the battery pack, however, it does not use or connect with a USB-C.
@ginocruz8220
Жыл бұрын
@@thinkwaredashcam how can i use it if my dash cam only has an usb c input?
@thinkwaredashcam
Жыл бұрын
@@ginocruz8220 Unfortunately, We can only confirm the compatibility of Thinkware Products with the iVolt Battery Packs.
Does it work with lexus nx300h hybrid car?
@thinkwaredashcam
3 жыл бұрын
Unfortunately, our OBD-II cable does not work with hybrids or electric vehicles.
@VincentGomez2255
3 жыл бұрын
@@thinkwaredashcam On your website, you guys carry both for hybrid and electric vehicles.
@siricepick
2 жыл бұрын
@@thinkwaredashcam Hi, can you explain why it doesn't work? I have a Volvo XC90 Recharge, and I just want to understand why. Thanks.
@thinkwaredashcam
2 жыл бұрын
@@siricepick Hello there, the OBD cables cannot read the voltage levels on Electric or Hybrid vehicles which can cause the camera to go into parking mode while you are driving!