THIS VIDEO IS PERFECT. Simple directions, quick delivery, straight to the point. You're the best. Thank you😊😊

Kind sir, that paint job is flawless! If I matched my wood that well, I'd lay a picture frame around it! Lol

@Yachtnurse51

11 ай бұрын

🤣😂

I found this video useful in that it encouraged me to repair a gouged vintage receiver end-cheek. I brushed on some 2 part epoxy adhesive, sanded it, then applied brown and black Humbrol/Testors paint (with a brush); the sort used to paint plastic scale models. I used a straight edge to help me keep the grain accurate. You need a bit of patience, leaving enough time between coats. Brown on first, then bIack (sparingly) for the grain, then a realy thin coat of brown again to blend the colours of the previous coats. I then finished it with clearcoat. The results were impressive, (if I say so myself).

Wow, after months of trying to fix/match my vanneer cabinet door I used your technique. Great results, great video. Thanks

Amazing, complete, to the point, short.

This was the most helpful video I watched..thank you

Thank you, did not know about this product before watching your video, will give it a try.

Nicely done!

Wonderful, thanks so much.

Alright smarty pants . We aren't all top artists some of us struggle with drawing matchstick men. You've done a great job, I just want to patch veneer on a table top I have sanded down as it's dark oak but with minimal grain I am hoping I can find a filler like a 2 part epoxy then stain it quite dark as the legs are dark anyway hopefully it will hide any misdemeanors. I don't usually take on furniture projects for myself with damaged veneer but it's now time after a friend donated me some 1960s gplan coffee tables and I am a fan of this era (even though gplan is just cheapy particle board under the veneer) it still has lots of style and character and deserves my best efforts I can't paint it that is sacrilege. Thanks for the upload it's interesting but you are far far to good at matching colours.

DAP/Plastic Wood stain markers work really well to stain JB Weld Quickwood, too.

Excellent thank you!

Nicely done sir

This is so helpful. Our chip is in the middle where one of my kids peeled a piece off.

Awesome thank you.👍🏻

thank you.

So cool!

Why didn't you show the finished job? It didn't look close enough to match by the time the video ended. Did it get better looking?

@ramonrabre7387

4 жыл бұрын

BBJayJayBB of course not. Nothing replace the veneer like other veneer

Perfect!

I have a use for this tip ! Thanks !

Will this work on particle board. The decades old particle board cupboards have large dents and deep scrapes on them.

Nice

This is great, thanks. Do you think it might be ok to finish with danish oil after the paint has dried, or that might mess up the paint job?

Thank you for this great video. My search for Quickwood results in J-B Weld KwikWood Epoxy Putty Stick 1 oz. Is this the product you used?

I have a piece that needs repair in the middle of the table, not on an edge. Can this technique be used?

@Saintathantwinpeaks

Жыл бұрын

The edge is the trickiest part. Why would you even think you couldn't do a repair in the middle?

my trial didn't work out at all. I did it just like the video. The Quickwood didn't come together easily and after 15 min of kneading it was still hard. I put it on just like the video, but repeated attempts to smooth it over & remove excess w/ a flat metal spreader, only pulled the stuff up from the space I was trying to cover. I pressed it down w/ my thumb as thin as I could get it. It ddin't have that flat, smooth look of the video at all. I tried filling another space w/ good ole' Plastic wood. IT worked like the video showed the Qw working. It dried up nicely, as did the Qw. I sanded both and the stain I used covered the Plastic wood filled space much better than it did the Qw space. That spot stayed the same color as the QW was coming out of the package. Maybe I messed up somewhere, but I won't prder any more Qucikwood.

@Saintathantwinpeaks

Жыл бұрын

If something isn't sticking then you need to degrease it first, rinse with water, then allow to dry.

Can you use oil stain to paint the patch?

Now this is a repair video .All the ones i see are done with white filler and painting the door I don't want to have to do that .

did u sand or cut by a card after?

I could never make kwikwood take stain. Is it only gel stains that work?

That looks better than a patch.

I wish I had thought to simply repair veneer instead of removing it and damaging the piece underneath

Damn. Believe me, I mean that in the highest regard.

Where do you get the quick wood and hell stains? That was great!

@AngeloLuis22

4 жыл бұрын

Quick wood for short epoxy

@claireclaire238

2 жыл бұрын

Hell stains ! 😂😂😂

I'm wondering if this would hurt the sound of an acoustic guitar

Gelatine is that some sort of wood dye.

What wood patch you used ?

Where do you get the gel stains? What brand do you like?

@brandonhill2183

3 жыл бұрын

minwax is the most common brand for stains and gel stains. You can find them at home depot or lowes

I have wood filler i was goingbto try that, can I use that, and where did you find those paints?

@jessicawendland9666

4 жыл бұрын

What are the Paints??

@kellygervais3440

4 жыл бұрын

@@jessicawendland9666 he never said, I couldn't find what I wanted here in canada, I thought maybe it was a boat paint... I ended up using stains but that sucked, maybe he used a type of hobby paint, but it's very hard to cover wood filler....

@jessicawendland9666

4 жыл бұрын

@@kellygervais3440 That's what I was thinking too. Wood filler is hard to cover with stain.

Whaaaaaaat?? WHHHHHYYYY would you not show the finished end product?

Hi

Wont those tabs eventually rust?

He was doing a great job until he fucked up in the end and the paint got muddy. You have to let it dry, seal it, and then bring the darker color.

@yaash4123

3 жыл бұрын

Looks better than it did before.

Quickwood LOL

This time I will do it manually with the help of Woodglut designs.

Step 1 fill with wood putty. Step 2 just be a fukin artist with no other direction.....

@Yachtnurse51

11 ай бұрын

😮

This is un respectful with the furniture

Sorry, this is no fix. I guess some people wouldn't care but it sticks out like a sore thumb.

@johnnyshinnichi1785

4 ай бұрын

How do you know? He didn't show it completed.