How To Paint Your Car Using These 3 Easy Steps
Автокөліктер мен көлік құралдары
🟢🟢CHECK OUT OUR ONLINE STORE🟢🟢www.amazon.com/shop/paintsociety
🔺🔺SHOP ALL Exclusive Products found on our KZread channel for your project! 🔺🔺
BUY THE OFFICIAL PAINT SOCIETY Paint Suite!: amzn.to/3qlkVUs
In this video we will gonover the 3 Easy Steps to Prep and Prepare your vehicle for paint!
Products in this video:
Paint Gun Choices:
Expensive:
DV1 Clearcoat Gun: amzn.to/3BBqL5O
DV1 Basecoat Gun: amzn.to/3RcSQ9j
Budget:
Astro Pro HE: amzn.to/3FhGPLQ
Astro Pro HVLP: amzn.to/3FIfuno
Iwata Kiwami: amzn.to/3hgHYva
Iwata Air Gunsa:amzn.to/3iMYxPH
Cheap:
Harbor Freight: amzn.to/3UKSFUw
Paint Gun Cleaning Kit: amzn.to/3qZ4dXM
Gloves: amzn.to/3R9C9eW
Gun Cleaner: amzn.to/3LDv2tW
Water Cleaner: amzn.to/3Budv2V
Lacquer Thinner: amzn.to/3VQBsdk
Lint Free Towels: amzn.to/3UnAd40
Places to Buy Paint Online:
Tacmopaint.com
Paintscratch.com
speedokote.com/paint/
Eastwood.com
Пікірлер: 136
I love how you have like 20+ comprehensive beginner how to videos. The more I watch, the more confident I am going into this. Keep it going!
@PaintSociety
7 ай бұрын
Thanks for watching !
Man absolutely knows his craft. Makes it look so easy. It’s incredible.
The Chanel where the learning does not stop at the end of the video....... love it. Thank you sir !!!!
@PaintSociety
11 ай бұрын
Glad you enjoy it!
Brian (I really love it when you demonstrate this sort of job that we might attempt at home) thank you!👍
@PaintSociety
11 ай бұрын
Glad it was helpful!
@BeaterCollector
9 ай бұрын
It's against the law to paint a vehicle in your driveway. It sucks cause someone called the bylaw on me.
@PaintSociety
9 ай бұрын
You get one car a year in florida
@BeaterCollector
9 ай бұрын
@@PaintSociety What's the deal with paint chipping off when I did a wet on wet on the front bumper? Maybe I let the sealant dry overnight before I painted it? I can't remember but other than that what could have caused it to chip off?
@philtucker1224
9 ай бұрын
@@BeaterCollector Don’t you have a driveway of your own buddy?
Hey bud I enjoy all your videos helps refresh my memory I haven’t painted a vehicle in years but plan on painting my truck soon. Thanks for all the tips 🙏🏽
Excellent work my friend. Beautiful job! I love the way you masked off the right way. You taped right to the front of the car the way it should be. You rarely see that people are always trying to cut corners. They say don’t worry it blends in. No need to overdo it. I just subscribed because you are wonderful.
I was waiting for this!!! VERY NICE 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
@PaintSociety
11 ай бұрын
I need you to hold down KZread paint videos, I’m actually busy at work and can’t post as many videos!
@speedokoterefinishnetwork4937
11 ай бұрын
@@PaintSociety LMAO perks of being a owner operator my friend. I can spend more time making content. But it has its downsides as you and I both know dealing with customers is HARD.
Hi Bryan, thanks very many for the awesome video. And all the teaching and you are a super painter. These videos are extremely useful to know what to do and what not to do. Obviously DIY ers and weekend warriors can not afford to buy all the stuff you use, that too for a small repair. But I get the gist of it, how to sand, apply bondo(putty) a very thin layer, and use black primer on a black color car (common sense) , how to make the surface very very flat and smooth, and how important is to make it bone dry, after cleaning it with super degreaser. Very very helpful tips for some one who never painted cars but fixed kids as a profession. Thanks Bryan, appreciate you.
Thank you for being so thorough!
Beautiful job. Very well explained.
'Thanks Brian! Love your videos. Very informative and full of great tips for us amateurs. Thanks for sharing.
Your the man Brian , love watching your videos
Thank you, never too old to learn and you're a great teacher.
Excellent instructional follow through on this video Brian! Better every day brother, thanks for all you do 😊👏👏👏🍻
Looking good as always! Awesome job
Awesome job!
Very impressive work ethic! Congratulations!
Hey Brian, interesting you finish the repair with a 320 on the DA. I finish my repairs with 320 on the block then feather the deeper scratches surrounding the repair with 320 on the DA. Good work as usual👍🏼
you is the best started painting cars thanks to you makes everything easier to start
Great teacher! I love your videos
Perfect, You Win!
nice job man and great tips in this one
Nice.. well done brian 👍
Amazing job.
Thanks Brian.
Perfect I like it
Thanks Brian, I'm heading to the garage now, this was the video I needed!!!
@PaintSociety
10 ай бұрын
Glad to help
nice well done job young man .
I love paint society, and the way Brian explains everything 💪
@PaintSociety
11 ай бұрын
Great to hear!
Hey Brian thanks for this video im getting ready to paint my first car 97 camry hope it comes out nice like your beautiful jobs.
Very nice!
You are a very good KZreadr. ❤
Sagola what? I thought your DV1 was your favorite clear gun. I was about to buy one thinking it will help me with my novice clear skills even though I know it will not, but I can dream. Great video as always. I learn something from each one and really appreciate the time and effort you put into them to share your knowledge and experience. I learn every time I spray including today when I made a huge clear mistake. That just means I get to sand and re-do tomorrow. Like you say, it is just paint.
Banger!! Pretty cool to see that fk8 yellow in the background too
Love you bro 🌹 the best channel
Great video Brian
It would be nice to see more footage of the finished product if possible. thank you!
Thank you so much for this and your other videos bro....... really helpful
@PaintSociety
11 ай бұрын
My pleasure
Have always found black (even metallic blacks) most of the time not neading to blend the base coat. Aslong as the repair is good, black always comes out great!
Italian,,a little bit short video but one of your best production,nice explained with words and video
Hey bud u are awesome u have makes easy the job for me 🙌🏻 i have a question what do you think for the spray gun sata jet x5500 rp 1.3 I nozzle??
thanks bro
Hey Brian. What 2k clear coat would you recommend for body and headlights?
Great Videos great job Question Had my car done professionally Car was down to mostly metal . Sigle stage paint was applied How many coats of paint should usually be applied on single stage ?
You can actually see Brian filming in the reflection. Great work bro.
Hi Brian, I've watched loads of your videos as doing a paint job on a modified 300zx with a wide body kit. Dam car keeps bitting me back and I'm forever going back on it. 1st time I see a few grey primer specks in the clear. Then 2nd time I had tried to see if I could blend the clear inn. Nope as It did as u showed on this video. So I tried fadeout. Omg I wish I never now as reacted, so had to do again. Now I've a reaction on the rear arch. Driving me nuts so come home to chill away from it
Nice, did you sand all the way up A-pillar also, with that K600? Can you paint directly over old clear coat? Thanks
Any chance you will discuss the inflatable paint booth?
Nyc working
Brian, i often get a sticky substance on the surface of putty. What causes that? I'm thinking that its not thoroughly dry. A little reducer wipe will remove it.
It is my understanding that many 2k base coats and 2k lacquers contain isocyanates in the activator. I notice in your video that you are not wearing an air fed mask or using eye protection.
So if i had a perfectly fine part, factory painted, clear coat everything is fine. And i simply wanted to change the color. Do i sand down removing the old clear and base coat. Prime it and paint Or sand the clear for the new paint or primer to grab onto to.. Beginner learning. Have some panels lying around i wanna practice on
hi brian, saw recently a video that you talk about K-grid sandpaper, do u still use it? or do you prefer the old P-grid?
Can you use a bright color spray paint for guide coat? I mean a cheap spray can.
Hello, dumb question. getting ready to paint a panel truck with a step ladder. center of the truck is too tall to reach from the ground. Using nason single stage paint. Should I paint the whole top of the truck with the 3 coats of paint then finish the sides. Maybe this will keep me from scratching the truck. What weather conditions and temps should I aim for? Or should i get up early in the morning to paint. Thanks Brian
wow nise
Do you let the paint fully dry before removing the masking tape and plastic
What did you use to sand the rest of that panel, on the top of the windows?
What type of sanding respirator are you using
Hello ,Brain. We are speacilized in making coating thickness gauge and we wonder if we have chance to work together
One day could you do a video on painting the inside lip of a wheel well? I just painted the bottom of my car (all steel), and I really struggled. I know in a gun review you did you had it down to basically an air gun fan. Anyway...sure would help
Ty for ur
Brian, could you do a video sometime about decals under clear coat?
Brian: I’m painting my 1965 C10 where the top is white and the bottom half is Red. They meet without a trim piece. Question: should I mask each color where they meet or apply white then mask and paint over the white with the red. I’m way old school using single coat paint and no clear since in 1965 they didn’t use clear. Gary - in Nebraska
How long does bondo have to cure before you sand and prime? How long does primer have to dry before you can paint base coat? How long does paint have to dry before clear coat? I’m just painting my hood with rattle cans.
Hey man i need some advise on my 1933 studebaker, how can someone get a hold of you?
Hi, could you give me a bit of help, I bought a car that has been repainted all under the hood area and it had a few chips in the paint so I started to repair it but then I found that the entire paint was just peeling off and had not stuck to the surface at all so I used a paint scraper and just remover every bit of the paint back to the original Black paint underneath as the car was originally Black but now I am wondering why the paint did not stick so I can do it again without the same problems. Can you give me any advice as to what to do now. Thanks.
Great video. I have a few amateur questions! What happens if you try to cut paint into the middle of the roof rail? It will delaminate? The old burn in/cut area looked like it could have been sanded and compounded to blend? When you used a block are you allowed to use one hand? Can't it create uneven pressure? Or does it not matter as you refine with the orbital? Can you find 2k primer in a can like you can 2k clear? Can you use regular primer for a proper repair or will it shrink or fisheye eventually? Amazing job. Flat black seems like an easy repair. Thanks for simplifying paint for us laymen
@pbassassinz8097
9 ай бұрын
12:21 just sand it down with 180 doesn't matter if it's in a roof rail area treat it the same keep the block flat don't worry about the pressure so much just let the sandpaper do the work. Yes use only 2k primer no cans just get a paint gun if you can't get a proper setup you can't paint cars period.
Is it true that urethane primers can be more porous than an epoxy high build primer? Why is it or when is it better to use a single stage vs a two stage base coat/clear? Thanks for great videos. Sub here
My WRX paint is 8 years old. It's looking dull, can i scuff up the whole car and hit it with some 2k clear to save the base and bring back the factory gloss? Then I'll cut and compound the whole car panel at a time
Happy Father’s Day 👊🏻
I have the same color Acura 2014. When can you work on mine
great work. I have a different question I wanted to see if maybe you could link one of your videos. I have a hood that was touched up by the dealership about 1 year ago. Now the paint has a chalky white look to it. Any videos on taking care of this?
@sealisland1
11 ай бұрын
If it's black, chances are that it's a cheap single stage. Best thing is to strip to metal and refinish.
Hi, please make a clip about color reaction. Why does the reaction occur and how can we fix it? Thank you
im still wondering if one can paint without a booth and without a garage(like in the open air, but with like a tent over the car. my biggest fear is to get dust and debree in the paint since i dont even have a garage)
I've watched a lot of your videos and purchased items you have recommended. Thanks for all the help. I have a question. I was spraying primer on a door that I had horizontal. As I sprayed it, I got over spray on the panel just ahead of where I was putting the primer on which caused my primer to be rough. Is this a gun adjustment problem? Too much air pressure or too much fluid? It could just be a newbie. Thanks for any help.
@PaintSociety
11 ай бұрын
Add 10% reducer to the primer. That will Help
@Frank-cx2fj
11 ай бұрын
@@PaintSociety Thanks Brian. I will give that a try. Keep up the great videos.
How much did this job cost? I want to learn how to do estimates so i can do sideline.
All the wet sanding and water washes... I have extremely high mineral content to my water... I'm country and it is well.... so what do you suggest? (No I'm not dropping huge $ for a reverse os system!!!) Thanks.
how long between base coat drying and tacking? how long after you apply the clear coat did you buff?
@PaintSociety
11 ай бұрын
10 min and 24 hr
Hello, please I like to know why come scratch and broken the paint after filler and primer .. I want help because I have 3 car come same problem Thank you
Anyone else notice the Y49 CRX at 041 and 5.28? Brian, why are we not seeing the work done to the CRX???
I'm first!😂
What kind of car painting process is 2 cm/p?
What kind of paint were you using?
whats the difference between laquer, acrylic laquer, and urethrane? what type of paint is best for a metallic paint, which one is the most affordable, is it cheaper to paint my entire car with a rattlecan?? i have no spraygun, and none of your videos explain lacquer vs urethrane!
❤❤
U stated with 180 the u go to p180 what’s p 180?
👍 🏎
👏👏👏👏👏👏
it looked like burn on the blend , as far as da , I always do it first , then repair , then prime , finish wet 800 on cob nice job 👍though
@PaintSociety
9 ай бұрын
Thanks for the tips!
@icarusdb58
9 ай бұрын
didn't intend it that way
I am also painter❤
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
You hllp me i nied job i.m 11 years exapirnce
Wer u guys from ? I need a truck painted 😢
Hi Brian can you put the putty on over the sanded paint
Sir job vacancy for ther
@jayeshjayesh2428
11 ай бұрын
Plz reply
By the way, I forgot to ask where are you located? If I ever need you, I’m gonna come find you. 😂
I need work prmant i am pakistani my experience 7 years
🇲🇦🇲🇦🥇🇲🇦🇲🇦
Im car pantar