How to Mix Slip and Tack Solutions For PPF Installation - TESBROS
Автокөліктер мен көлік құралдары
This was part of our DIY PPF course, however, we have slip packets now so you don't have to use the syringe. This video seemed to help other installers so we're keeping it up!
If you're interested in applying DIY PPF to your Tesla, check out our courses at courses.tesbros.com/
---
Tesla Cleaning Products:
● Starter Car Wash Bundle: tesbros.com/products/clean-st...
● Interior Cleaner: tesbros.com/products/interior...
● Waterless wash w/ wax: tesbros.com/products/waterles...
● Car Shampoo: tesbros.com/collections/clean...
● Glass Cleaner: tesbros.com/collections/clean...
Top Tesla Accessories:
● Model S: tesbros.com/collections/model...
● Model 3: tesbros.com/collections/model...
● Model X: tesbros.com/collections/model...
● Model Y: tesbros.com/collections/model...
---
Our Shop - tesbros.com
Facebook - / teslabros
Twitter - / teslabros
Instagram - / teslabros
Email - support@tesbros.com
---
This video and design is protected by the U.S. and international copyright laws. Reproduction and distribution of this video for commercial purposes without written permission from TesBros LLC is prohibited.
#teslaaccessories #tesla #ppf
Пікірлер: 46
I have watched about 20 ppf videos looking for the proper mix for solutions. This is the 1st I have seen that actually tells your mix rates. Thank you!.
Good video I mix fresh slip daily for tint....with distilled water....
Thanks! Good video man
Hi, do they make precut 3m 2.0 2024 model 3 ppt? Can you also make some video to install the fender, doors, and trunks? Thanks.
Great video thanks. For the tack solution - I noticed you used 70% isopropyl alcohol. What if I used 90% isopropyl alcohol does the 8:2 ratio still work or does the alcohol need to be further dilluted?
@tesbros
Жыл бұрын
Since it’s stronger I would further dilute it. I normally use 70
Can the tack solution work on Matte paint finishes without damaging the paint ?
@tesbros
6 ай бұрын
yes
Hi Tesbros, what particular soap? Can i use baby shampoo? The 200 ml ISO Alcohol, is ithat a 70% or 90% isopropyl alcohol that I pour into the 800ml distilled water? Iam in Australia hardware store sell 2 kinds of ISO alcohol 70% & 90% ISO alcohol. Thanks
@tesbros
Жыл бұрын
70% iso alcohol. I like using 7th generation dish soap or dawn dish soap, but I know some people do use baby shampoo
I have an area of PPF where a few millimeters have started lifting on the edge after about a year. Would tack solution fix it?
@tesbros
3 ай бұрын
Since it's been a year, no. It'll probably keep lifting. If it bothers you, you can get the panel replaced. If you got it done through an installer, see if you have a warranty that protects against this.
is it okay if i use Fairy for the slip solution?
@tesbros
8 ай бұрын
shouldn't be a problem!
Do you really need to discard the solution if not using within a day? I was planning to do rockers today and the hood next week.
@tesbros
27 күн бұрын
Yes, it's better to remix if waiting that long. Fresh slip solution maintains a consistent mixture, ensuring a cleaner, more effective application throughout the installation process. Older solutions may become less effective as the components separate or evaporate.
I have seen videos saying not to use alcohol and water on headlights just hot water. Is that true?
@tesbros
5 күн бұрын
@@robert_murphy916 there’s nothing wrong with using tack on headlights. We usually use it to seal the edges at the end at least. You shouldn’t need much though
@robert_murphy916
4 күн бұрын
@@tesbrosok thanks how much soap do I add to a 32 Oz bottle and alcohol
where can i get those double trigger bottles?
@tesbros
Жыл бұрын
Here you go! tesbros.com/products/spray-bottle-2-pack
Thank you! Just ordered the kit as it is exactly what I was looking for.
@JetSkiSuper7
Ай бұрын
The kit arrived yesterday and I am truly impressed with the contents as its got everything I need to install PPF on my Tacoma. $100 well spent and thanks for all. BTW, your installation videos are stellar.
@DriftKilles12
Ай бұрын
You straight up a downy, you can buy all these things for less than 20bucks. Theirs a fool born everyday
Can we use tack solution for installing ppf?
@tesbros
Жыл бұрын
Yes, you use both slip and tack
excuse the noob question but what type of soap should I use for slip solution?
@tesbros
Жыл бұрын
We usually use seventh generation dish soap
@302project
Жыл бұрын
@@tesbros thank you!!
@nasigeo2790
Жыл бұрын
@@tesbros hello, what is the difference in texture of 7th gen to baby shampoo? i found baby shampoo to be oily, im not sure with 7th gen its not available in my country, is it the same as Dawn dishwash?
man i just mixed some dawn dish washing fluid and water. fuck all that
Is there any validity to use hot water as a tac solution?
@tesbros
Жыл бұрын
It can be when you want the film to stretch a bit easier and water can be used as tack. Essentially what you are doing is flushing out the soap and replacing it with water or water mixed with alcohol. That activates the adhesive and makes it “tack”.
@mrbrown30238
Жыл бұрын
@@tesbros thanks . I'll be doing my 1st install soon. Ive mostly heard of alcohol and water mix until It next heard of just only hot water. Would you recommend one for this 1st time diy'er? I have a tac diagram for each piece.
@tesbros
Жыл бұрын
@@mrbrown30238 Good luck! I usually use hot water only in certain areas. For example, I use it for mirrors when I'm bulking it. Or when I'm doing a good amount of stretch on a difficult bumper. If you don't have to use it, I'd recommend using the alcohol/water mix for tack.
@nickpapa6872
Жыл бұрын
@@tesbros is it advisable to use heatgun on the edges for easy stretching?
@mrbrown30238
Жыл бұрын
@@tesbros very much thx
How many gallons of distilled water needed to do the whole front?
@tesbros
Жыл бұрын
2 gallon should be enough since one bottle per panel but doesn’t hurt to have extra.
Tesbros Bros team Pls pls pls start selling a matte version of the Ppf- I would like a matte look on my black Tesla Y.
@tesbros
Жыл бұрын
We plan on it!