Well, if anyone's still not pursuaded by the benefits of wet-sanding then they never will. The ridiculous level of improvement in smoothness and reflectivity from the original orange-peel laden bumper is beyond words. Absolutely amazing result. I learn a lot from your videos PoV and this is another one to add to the armoury of knowledge. Cheers!

@cvrpov

Жыл бұрын

Agreed

@user-rf5nq6fw2m

2 ай бұрын

Too scary to take too much clear coat off if you don't have a lot to begin with, they're expensive and time consuming to reclear, tape up entire car again, etc. Sometimes even 2000 sandpaper takes off a lot. I guess sandpapers are all different by different brands.

@roymoxley2587

7 күн бұрын

Damn right wet sanding is the only technique to get that show finish and of coarse the polishing after , I always put a little soap in my water

You’re a proper craftsman, a pleasure to watch and learn, thank you, Sir.

@cvrpov

7 ай бұрын

Very welcome

Jus came across you videos, painting aircraft wingtips spinner and eventually the fuselage with acrylic urethane single stage and was looking for a was to cut and buff, good video. Simple and to the point. Cheers.

Probably the best video I've seen so far. Tried your techniques on my car door that had some orange peel and it now looks absolutely perfect.

Had the exact awful respray on my bumpers. Followed your instructions to the T. My God the poor paint work now looks better than OEM! Thank you so much for educating me/us 🙏🏼❤️

@cvrpov

6 ай бұрын

Glad I could help

This video is so good , i have bought exactly the same mop and thought it would be rubbish and now after watching you , and CLEAR instructions with no edits at important parts I say THANK YOU I have a black car as well and will be doing this to save a respray on the door Nice one for taking time to explain clearly to us who are not professional and giving in depth information All the best to you sir

Wow what an unbelievable finish! Thanks so much for the tutorial I shall be using this on my Merc in the coming days, wish me luck, if it comes out half as good I'll be delighted

Cheers, ive been struggling with trying to find a cutting compound that actually tells u what grit sand paper to use prior to the polish (rather than marketing shite) and knowing how much time to spend on each section with the polisher. U cleared it all up and im off to buy stuff and then re-polish a car I bought a week ago.

Great video and great detail. Thanks very much for showing the whole process.

Love the video matey , your so real and simply explained for anyone understand, well done bro ,really enjoyed it

@cvrpov

Жыл бұрын

I try and keep it real, interesting and not waste anyones time with unnecessary chat

Top job. Going to try the exact same thing now with my x5 to remove the hazy finish

Absolutely amazing . Exactly what I was looking for thank you

Spot on and to the point as usual. Excellent video, well done.

Brilliant, very impressed a well put together and informative video.. Did a course 30 years ago on car body restoration and spraying. and just messed up and this video showed me how to put it right

@cvrpov

9 ай бұрын

Glad it was helpful!

Thank you for your time with this demonstration. I learned a lot.

Great video, and great results , really easily explained!!Nice

Never usually comment but can definitely vouch for the technique and product used in the video. Got a mirror Finish after following this video. Thanks mate 👍

@cvrpov

5 ай бұрын

Awesome, thanks for commenting

Thanks for sharing your technique . Love all your videos.

@cvrpov

8 ай бұрын

Cheers

Great Video Sir! Definitely a worthwhile experience to know. Thanks for sharing your knowledge and experience with us.

@cvrpov

Жыл бұрын

My pleasure!

I try it with my car and It works,, fantastic, thank you ❤

Wow thanks again bud keep the videos coming 👍 love it

Well done, thanks for the useful tips.

Fantastic result

Beautiful. Well done.

Make easy and simple with Awesome results thank for sharing,,,God bless

Your skills are #1 along with your easy explanation & tutorial are very impressive 👍✌🏻

@cvrpov

Жыл бұрын

Thankyou

Amazing work🎉

Amazing video! I have a black car with blemishes, and now i know how to get rid of them! Thanks!!

You are a good teacher, I am going to paint my truck I have a clear understanding of how to finish and make my work look good.

@cvrpov

8 ай бұрын

Awesome mate good luck

Amazing work !

Awesome video, thanks for the handy tips.😅

Thank you for all your videos!

@cvrpov

Жыл бұрын

Thank you for watching

Wow. Outstanding job.

@cvrpov

Жыл бұрын

Cheers

Excellent video mate thank you

This is outstanding. Thanks for showing us mate. A bluddy massive help

@cvrpov

8 ай бұрын

No problem 👍

Absolutely brilliant! Thank you!

@cvrpov

Жыл бұрын

No problem

Remarkable! Thank you for sharing mate 👌🏻👌🏻

@cvrpov

Жыл бұрын

No problem thanks for watching

WOW, amazing job

Brilliant. Thanks for all the tips.

@cvrpov

Жыл бұрын

Thankyou Akbar

Nice informative video, thanks for sharing.

What a brilliant job again 👍👍👍🇬🇧

@cvrpov

Жыл бұрын

Cheers

Outstanding work thank u so much for showing us from Richard in Cardiff

Thing is, people are afraid to do this, as putting sandpaper - even high-grit wet sandpaper - to a car's paint freaks people out. But your video is so detailed, it gives me the confidence to at least try it. Very well done!

@mattiagri

29 күн бұрын

Tried it last weekend on my car's tailgate (it was resprayed by the previous owner)... Came out like a mirror and now I have to proceed on the whole car because I love the finishing, that is better than the original paint one. One important thing: if you don't have a VERY aggressive polishing compound, the first pass with the buffing machine will disappoint you. After the initial panic, you can simply try with another pass. And another one. Very time consuming process, but very effective at the end!

Absolutely amazing job mate , first vid of yours I have seen and gonna sub. Thank you so much .

@cvrpov

Жыл бұрын

Appreciate the support Paul

ANOTHER. BRILLIANT. VIDEO. Thank you soo much. :)

@cvrpov

Жыл бұрын

No problem

Bloody great job m8 .Cheers from Tassie Australia..

@cvrpov

Жыл бұрын

From the uk my man we appreciate the support

Beautiful job!

@cvrpov

Жыл бұрын

Thankyou

This is brilliant. Thanks 👍🏻

@cvrpov

Жыл бұрын

Thanks for watching

Amazing work mate...

@cvrpov

9 ай бұрын

Thanks for watching!

that is just amazing bro what a great job done stunning work az allways great content and great cam work its a credit to watch your great talent of skill

@cvrpov

Жыл бұрын

Thanks kian great support

Another good job 👍🏻

@cvrpov

Жыл бұрын

Thanks

Great video, much appreciated:)

@cvrpov

7 ай бұрын

Glad it was helpful!

Great video again mate

@cvrpov

2 жыл бұрын

Cheers rich

Awesome job

@cvrpov

Жыл бұрын

Thankyou

Perfection!

@cvrpov

2 жыл бұрын

Thanks

Wow what a mirror shine!

@cvrpov

Жыл бұрын

👊🏻👊🏻

Lovin these videos.

@cvrpov

Жыл бұрын

Glad you found the channel

Great job👌

@cvrpov

2 жыл бұрын

Cheers bud

Awesomeness 💯👀👍

Amazing.

Jus the vid I needed 👍 Jus finished painting my rear bumper that had flaky paint, looks good but very dry to the feel a bit peely an not as shiny as rest, only done with rattle cans, gonna have to try this now👍

@gunhojack915

Жыл бұрын

Update! Tried this 2day, what a difference it made shiny bumper again, top job thanks! 👍

@cvrpov

11 ай бұрын

Glad I could help

I would of gone 3000 wet trizact after 1500 alot quicker and easier, but everyone does it different top work as always boss 👍

TYVM Gov'👍👍👍💯

Good man , thanks for showing me how to make paint shiney , cos by Christ i made a mess of the paint job. I need all the help I can get mate lol

Looking good

@cvrpov

Жыл бұрын

Thanks

Iv achieved these results with a DA and paint/clear out of cans but the 3000 grit was Definitely needed

Outstanding video on removing orange peel👏👏

@cvrpov

Жыл бұрын

Thankyou

ABSOLUTELY UNBELIEVEABLE. CANT WAIT TO DO MY CAR.

@cvrpov

Жыл бұрын

Cheers thanks for watching

I love it

@cvrpov

2 жыл бұрын

Thanks for watching

That video was great thanks..just did a new panel on an audi. First attempt at flatting used 2000, 3000 then G360 then AutoGlym super resin Polish but still a haze. Watching this looks like I didn't cut the peel deep enough to start. Can I just restart and cut again with 1500 now though? Kept getting dry circles with the G360 using my cheapish DA. Any advice would be great. One thing missing was when reloading pad, do you have to clean between adding more product, if so how? DIYer @ home. Thanks for the video was great 👍👌

Can u list the products plz? I really enjoyed this video and now I wanna try this on my car

❤awesome bro

@cvrpov

Жыл бұрын

Thankyou

Great clip, simple to the point and clear. You’re a good instructor. What about how much lacquer is on the panel and not removing too much? I may have a go on our seventeen year old Fabia which had a very average paint repair on some damage on a door.

@cvrpov

8 ай бұрын

If its orange peel then it's a usually got enough to play with

@Chrismckinney1

7 ай бұрын

@@cvrpovI’m in a similar situation with my 18 Tahoe. A guy repaired my damaged passenger side doors but left a harsh finish on them but I do see gloss but I want to be sure it’s ok to do since there’s bondo underneath?

Should never use a bucket chances are you will pick up some contamination and scratch the paint, best to use spray bottle with warm soapy water

Use a hybrid silkwool pad at speed setting 1 and u can cut that 1500 grit sanding right up. You dont want heat or pressure when cutting or polishing today's clearcoat. Laquer paint from years ago, you would benefit from heat during polishing. Friction and abrasives are the only factors in polishing now

Thanks for the video. Will the sheen fade away if you wash the car a few times?

You should do a pricing video and how u price jobs! Good job !

@cvrpov

2 жыл бұрын

Hi. Pricing is always down to the individual, geographical differences and assessing your client. I always work out how long it has taken and try and work to a rough hourly rate/how much I've saved the client, travel etc

Thanks alot man nice tutorial , i'll try to do it in my car door panel and i hope i won't screw it up haha

@cvrpov

10 ай бұрын

Good luck mate

Wish I could find an individual like you in the United States!

@cvrpov

Жыл бұрын

I'm sure there are people over there mate

Just recently spray painted new one piece plastic front end for Sonata. Oem Black 93 sprayed on first plastic adhesion sealer, three basecoats, two coats clear coat. Had fly land just as finished last clearcoat. To remove fly mark n get lustre should I do what you show in video??? I have not done anything for lustre and shine yet just steps mentioned. Great video, nice mirror like lustre!

@cvrpov

11 ай бұрын

Yes it is possible to knock the fly back with some sand paper and polish the area

did this on an outboard motor restoration. the entire mid looks soaking wet absolutely incredible! edit: im not sure i even want to use it now haha.

@cvrpov

5 ай бұрын

Love this mate. Thanks for the feedback

@ct1762

5 ай бұрын

@@cvrpov hey cheers my pleasure thanks again!

Excellent watching you do this. I've just bought a new car and there's some minor swirl marks in the topcoat. Just to get rid of swirl marks would you recommend using the G360 or if they are light swirls would you try just seeing if they'd buff out with polish/polishing pad first ? I've watched some of your stone repair videos too. Really excellent advice. I got rid of them totally

@cvrpov

Жыл бұрын

Hi Steven. www.paintgear.co.uk sell g360 snd also they do a polishing pad pack... it can be possible to use the g360 on a soft pad to refine the swirls from a cutting pad

@stebrad123

Жыл бұрын

@@cvrpov Many thanks will give that a try

Top man

@cvrpov

Жыл бұрын

👊🏻

I'm following this process on my GSXR nose cone after a crap respray. I work for an automotive product company so I have all compounds and polishes needed, do i start with stage 2 compound or stage 1 abrasive?

Ive used that g360 and like how it finished down but I find it has a short working time and is dusty when used with DA in Australia. Switched to 3D 500.

@cvrpov

5 ай бұрын

Depends on the car paint I find

This was so informative thank you! What pad do you use with the compound vs the pad on the polish part?

@cvrpov

9 ай бұрын

Just a stiff pad and then a soft pad

do we need repeat this often? what happens winters when can do this my paint will be look muggy? since cant compound? and what about car wash is it not gonna remove this layer?

Nice

@cvrpov

2 жыл бұрын

Thanks for watching

Can I wet dry a base coat of the original till I get to the original clear coat. The base coat was applied on top of the clear coat

I have paint touch up that came and said it needs clear. Can you do this process over clear?

Would you have to clear coat this aswel ?

So after everything is done you put any ceramic coating around it

How long should one wait after painting before sanding and cutting if you're doing a garage paint job?

how long do you wait after paining clear coat can you start sanding?

Love the videos mate! Very informative. What's the best way to get into smart repair properly painting and scuff repair. Any course recommendations? Cheers

@cvrpov

2 жыл бұрын

Probably watching my videos mate to be honest haha 🤷‍♂️. It's a bit short on courses. Where are u based

@TheZainy876

2 жыл бұрын

@@cvrpov based in leicester bud

@TheZainy876

2 жыл бұрын

@@cvrpov videos have done me great so far! Haha

im new to painting but iv been dry sanding 1500 with a da never burned through an edge i feel like drysanding is so much better and i can see where the orange peel still is, i then dry sand 2000 with da and wet sand 3000 trizact and my jobs come out like glass, is there any difference from doing it this way to wetsanding?

Hi thank you for these videos. those sanding scratches will come back in the future? I’ve been spending too much money in compounds but always the marks come back. Ty

@cvrpov

Жыл бұрын

They need to be thoroughly polished out. Alot of people don't polish enough

How about turning on polishing lights? 😄 I believe that some sanding marks and holograms will be still there 🙂

This a very informative video, however, have you or would you produce a video guide for repairing deep scratches you can feel with your fingernail? the type of damage caused by a keying, shrubbery, or more commonly the reckless supermarket trolley!

@cvrpov

Жыл бұрын

Yes I have..check our playlist out, chip and scratch repair. There is a green Jaguar bonnet with exactly this

Really like the real world attitude here. Not everyone has 40 buffers and 100 polishes and a thousand pads doing a 6 bucket wash process. I bet most internet experts would be delighted with a 1 stage cut/polish frankly!