I'm replacing 2 window motors because they went out within a month of each other and I chose not to use the others. I thought the window fell out of the track/holder (happened on my older autos). When I went in to fix it I found a mess of wire coming out of the motor. Asked my brother-in-law about it because he has had several of my make and model and he said they wouldn't have done that had I kept my tracks lubed as this video suggests. Well I never knew it was a thing. So after replacing them I am going to clean lube them just like this video instructs. Thanks Sweet Project Cars!

@SweetProjectCars

Жыл бұрын

If you use this tinyurl.com/bdf6a6ky you will never have that problem again Larry. Thanks for watching and sharing your story, we really appreciate it, have a great day my friend. mad Mike the hammer SPC

@DJGrasshopa

Ай бұрын

Hey Larry, I have to replace my driver door and 2nd row passenger window motors in my 05 Highlander. Can you tell me more about the mess you ran into with yer Beastie? They didn't work well before some crackhead beat out my windows now they work even worse.

@dwbiggly6907

13 күн бұрын

Yup, and a standard trani.👍

I can vary the speed of the window movements in my car by changing how fast I wind the handle!

@SweetProjectCars

3 жыл бұрын

LOL, I bet you can! Thanks for the chuckle and for watching. Have a great day. mad Mike the hammer SPC

@sorleymcsorley5558

3 жыл бұрын

Nice one

@emptyjar02

3 жыл бұрын

Hahaha

@styldsteel1

3 жыл бұрын

Lol!!! And never breaks down lol!!

@bongo874able

3 жыл бұрын

Amen to that 🙂

I have been in the auto detail industry for over 25 years and honestly the window tracks have never crossed my mind in terms of them slowing the up and down process, I always figured it was a weak motor... interesting, two 👍👍

@SweetProjectCars

3 жыл бұрын

Thank you for watching and commenting Rick, we really appreciate it my friend! Your customers will love you for doing this for them. Hope you have a great day. mad Mike the hammer SPC

@-na-nomad6247

3 жыл бұрын

Either this comment is fake, or you really didn't get to work on many cars in your 25 years of experience, I hope it's not the latter.

@reallifeengineer7214

Жыл бұрын

@@-na-nomad6247 he said auto DETAILING industry. Not auto industry. Detailing: making the car look nice, show-room ready. Nothing to do with fixing things on the car. 😅

I've been into fixing my vehicles for years and I have NEVER seen some of the stuff you guys do. It's awesome! Keep it up!

@SweetProjectCars

6 жыл бұрын

Tanner glad we can help and hopefully the tricks and tips prove very useful for you my friend

@dporrasxtremeLS3

Жыл бұрын

Outstanding!

Never would have thought it make THAT much difference. That's incredible! Wish I would've known this years ago

@SweetProjectCars

3 жыл бұрын

It really does! Thank you for watching and sharing E! Have a fantastic day my friend. mad Mike the hammer SPC

@KevinBrown-yn5mt

3 жыл бұрын

Lol I love u tube

The folks in your town must be so glad they can bring their car issues to you. I bet you have a hugely loyal customer base. I live thousands of miles away so I'm always grateful to you for sharing your experience as skills on KZread. Please don't stop now :)

@SweetProjectCars

6 жыл бұрын

bigblue we are glad to share all we can and have much more to do for great people like yourself :)

The main problem with sticking windows is it puts strain on the motor and regulator which can be an expensive repair. Good demonstration here which includes cleaning of the channels.

@SweetProjectCars

6 жыл бұрын

Ms thank you for your great comments and being here with us :)

Thumbs up for sure, the only video I have seen where the person cleans the window channel first and actually shows the window going up/down before and after.

@SweetProjectCars

2 жыл бұрын

Thank you very much, glad you liked it! Thanks for watching, we appreciate it my friend, have a great week. mad Mike the hammer SPC

You give so much good information to strangers trying to help them, may your good deeds come back to you tenfold! Best channel on KZread, period!

@SweetProjectCars

6 жыл бұрын

Brad my friend we truly thank you for your great compliments and for being here with us :) !!!!

Well... Now I know what I'm doing tomorrow!

@SweetProjectCars

6 жыл бұрын

awesome you will love the results thank you for your great comments and being here with us :)

Thanks for this. I can't believe I have overlooked cleaning the side channels on the windows and can't wait to give it a try. My front windows are quite slow, this should help a lot.

@SweetProjectCars

3 жыл бұрын

Glad we could help! Thanks for watching and sharing, have a great day. mad Mike the hammer SPC

@boastyy

3 жыл бұрын

@@SweetProjectCars Thank you , have a great day!

Car Detailer for the last 30 years from Brechin, Scotland here, Just recently came across your channel, Fantastic tips Keep up the good work love your videos

@SweetProjectCars

6 жыл бұрын

Ossie we are glad to hear that and very thankful to have you here with us :)

Thanks for improving my love for automobiles and how to take care of them. You’ve been the first channel I come to for car care.

@SweetProjectCars

2 жыл бұрын

Happy to help! Thank you for watching and for the comment, we take it as a compliment given your user name :) LOL Have a fantastic week my friend. mad Mike the hammer SPC

That’s the greatest thing I’ve seen all day!

@SweetProjectCars

3 жыл бұрын

Glad you think so! Thank you so much for watching and commenting R. Have a stupendous day my friend. mad Mike the hammer SPC

Always attributed slow windows to worn out motors. Absolutely blew my mind that it was that easy of a fix. Great video.

@SweetProjectCars

3 жыл бұрын

Thanks 👍 Glad to help my friend. Thank you for watching. Hope your day is the best. mad Mike the hammer SPC

Awesome videos!! So informative and helpful. It's great to have a "one stop" youtuber for all the detailing tricks instead of gathering videos from different sources. You guys are the BEST!

@SweetProjectCars

6 жыл бұрын

tee roy thank you so very much :)

@troy9864

6 жыл бұрын

Just did this trick today as preventive maintenance to keep them operating smoothly.

Your character is really coming through now in the voice overs and it really adds to the pleasure of watching a video. Keep going, you are doing your subscribers a lot of good :)

@SweetProjectCars

6 жыл бұрын

bigblue ya we had to go from car detailers to video guys and gals it was a bit tough but we are getting it slowly :) thank you for your support

Man. I'm glad I'm subscribed to your channel. No BS. No useless commentary. Short and to the point. Just instructions that produce results...on the cheap! Thank you staying on topic and not boring us with stories of how the burrito you had at lunch is making you fart all afternoon. Just saying.

@SweetProjectCars

6 жыл бұрын

Hot Farts we try really hard to get to the point and just get the job done thank you very much my friend for your great comments:)

I know this is an older video, but I just did this on a used car I just bought and it worked great. Both front windows were sticking about halfway - not going slow, stopped. I was worried I'd have to get new motors - this did the trick, even before the lube. THANKS!

@SweetProjectCars

3 жыл бұрын

Great to hear thanks for sharing have an awesome day mad Mike the hammer SPC

Dude just blew my mind 🤯 I’ve been wanting to fix my windows forever and I wasn’t even looking for this video but it showed up haha I thank you for your service 🙏🏻

@SweetProjectCars

3 жыл бұрын

Great to hear! Our pleasure my friend. Thanks for watching and sharing. mad Mike the hammer SPC

Did this today and even though the windows weren't that bad it still made a noticeable difference . Another good video .

@SweetProjectCars

6 жыл бұрын

awesome glad to help Willy thank you very much for your great comments my friend it is good for the entire channel :)

Wow, this is one of the most useful videos I have seen lately

@SweetProjectCars

3 жыл бұрын

Glad you think so! Thank you for watching, it's our pleasure to help. Have a great day Max. mad Mike the hammer SPC

This is some real top of the line professional advice !!!

@SweetProjectCars

3 жыл бұрын

Glad to help! Thank you for watching and for your comment. Hope you have a great day. mad Mike the hammer SPC

Bro your videos are legend quality. I’m always amazed at what you come up with. I made a video about my favorite you tubers of 2017 and you made the list. You are actually one of my favorite out that list

@SweetProjectCars

6 жыл бұрын

AutOdometer thank you very much and we are very flattered, to say the least ...We appreciate you more than you know :)

Thanks for video, straight and to the point with not too much talking like most videos out there. Really hoping this works for me and it’s not my motor or wiring that needs replacement.

@SweetProjectCars

3 жыл бұрын

Thank you for watching and for your comment my friend. Sounds like you've got nothing to lose! Give it a shot. Have a great evening. mad Mike the hammer SPC

One of the most useful channels on youtube, common sense videos we can all learn from to make our wheels last longer, stay cleaner and give us better service.

@SweetProjectCars

6 жыл бұрын

From one Mike to another Mike, thank you very much

@tonybiesmans9005

3 жыл бұрын

Super channel proficiat

I hadn't really given a thought about making sure that you exercise your power windows like this - to help keep the motors from going bad. Been there, done that - replacing the motors is NOT a fun time! So I shall add this to my list of things to do on our mini-van. And after driving down to Florida and back and experiencing the "love bugs" I think that I shall invest in a removable screen / bra for the front of the car so I can remove it and clean it. Right now the headlights need a good cleaning - just like you've taught us in the past. Cheers, Mike.

I tried this on our 18 year old GMC Yukon and it worked! Thanks for the tip.

@SweetProjectCars

4 жыл бұрын

You are very welcome glad we could help

Thank you so much for this. It fixed my window and was a huge relief. I will definitely do this from now on.

@SweetProjectCars

3 жыл бұрын

Glad it helped! Thank you for watching and sharing, we truly appreciate it my friend. Have a great day. mad Mike the hammer SPC

I always used a little silicone spray with a tube on the can, running from the bottom of the window channel to the top. I never thought to clean it out and use rain-x to coat the rubber, though. Great video, as always! Thank you for sharing your tips and tricks!

@SweetProjectCars

6 жыл бұрын

Nitro you are very welcome my friend

@jerrysingleton4956

7 ай бұрын

Which Aim product did you use to spray in track, I'm on website & don't know which one to buy that's the "dry" one is.

Love all your videos....you are the best Sir

@SweetProjectCars

6 жыл бұрын

Patricio thank you very much and we are glad to have you with us:)

Thank you sir. See to believe! I will try it. Maybe I will also find out that my power window motors were not bad after all!! Keep showing us how to make our lives easier for us. Most appreciated.

@SweetProjectCars

Жыл бұрын

Most of the time, it's not the motors, we've found that are bad. Thanks for watching and sharing kil, hope you have a great week and all the best on your project my friend. mad Mike the hammer SPC

Yo cuz ,another great tip ,when I detail some of my family or neighbors cars I'm going to do this for them weather they need it or not along with all your other great tips you shared with us all on detailing...YOU ARE THE MAN...can't THXX U ENOUGH ...KARL

@SweetProjectCars

6 жыл бұрын

RECON thank you for your great comments and being here with us :)

You sir, just gained a subscriber. Great info!

@SweetProjectCars

3 жыл бұрын

Welcome aboard! Thank you for watching my friend, we truly appreciate it. Hope you have a great day. mad Mike the hammer SPC

"!DUDE-YOU-ARE THE FREAKIN-"!MAN!" YOU HAVE TAUGHT ME SO MUCH IN THE PAST TWO DAYS OF DISCOVERING YOUR CHANNEL !!!!🛠🛠🚘🚘🔨🔧🔧🔩🔩🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

@SweetProjectCars

6 жыл бұрын

Tony Belisle thank you and so glad we can help :)

What you said about "use it or lose it" is exactly correct! When I got my old Buick- nobody had hardly used the passenger side window. As soon as I began to- SNAP CRACKLE POP and I was installing a new motor. The nylon gear was dry, and the glass tracks were filthy and sticky. That dry lube is a great idea- no mess on the glass, no petroleum distillates to damage plastics. Excellent! Thank you.

@SweetProjectCars

6 жыл бұрын

Hubba you nailed it my friend !!! and you are very welcome :)

Thats really impressive. What big differences clean rails can provide is astonishing

@SweetProjectCars

3 жыл бұрын

For sure! Thank you for watching and commenting. Have a great day. mad Mike the hammer SPC

Gotta love that guy. Big thanks

@SweetProjectCars

3 жыл бұрын

Thank you very much Gabriel, we appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC

I’m impressed and and I never thought of cleaning the channels .And I will perform this ASAP.Maryland showing 👌🏾

@SweetProjectCars

3 жыл бұрын

Awesome, you will love the results my friend. Thanks for watching and sharing, glad to have you with us. Have a fantastic day. mad Mike the hammer SPC

Thank you for such an informative video, I would have never thought of performing this cleaning procedure.

@SweetProjectCars

6 жыл бұрын

Pedro you are very welcome my friend, we are very glad to have you here with us !!

him: "most of you don't have glass that moves this slow" me: "you're right, mine moves MUCH slower"

@SweetProjectCars

3 жыл бұрын

LOL :) Thank you for watching and commenting, we really appreciate it my friend. Have a great day. mad Mike the hammer SPC

@utubecomtw13

3 жыл бұрын

Wait... Your glass can move?

@Jacob-le3jc

3 жыл бұрын

Same

@progsam

2 жыл бұрын

Hhhhh me, even more solwer 😅😅

@progsam

2 жыл бұрын

@@utubecomtw13 hhhhhh you killed me 🤣🤣

I don't have a window problem but it's great to learn something anyway! Would love to see what you do behind the door panel just in case haha I have a coupe which has frameless Windows ;)

@SweetProjectCars

6 жыл бұрын

Niamh we are glad to help and we will do one on the door panel repair :) thank you very much :)

Love your channel love your videos but best of all I love how you show undeniable proof! On top of that you always give the why the why is so important thank you for all that you do sir

@SweetProjectCars

6 жыл бұрын

Mr we thank you for your great comments and kind compliments :)

Best practical car repair channel hands down. Thanks SPC! Scotty just likes to hear himself talk. I'm dumping his lol

@SweetProjectCars

5 жыл бұрын

Bleau Hartley glad to hear that my friend and we are glad to have you with us we believe action speaks louder than words

I love this channel

@SweetProjectCars

6 жыл бұрын

Thank you Bernardo g we thank you for coming here to watch :)

The old saying "if you don't use it I wears out, almost, faster, when it's not being used." Ah yes, grandma said this all the time 😄

@SweetProjectCars

3 жыл бұрын

Thanks for watching Big D. Have a great day. mad Mike the hammer SPC

@thurgoodstubbs9670

2 жыл бұрын

I try to explain this to my girlfriend every day! Then we start to talk about cars.

@harryberry474

6 ай бұрын

Funny I was going to post the same thing, I'm sure there are some sayings I've never heard this one before but...really this is a saying? hahaha I've heard a saying similar "If you don't use it you lose it"

Good basic practical and to the point. Best video I’ve watched for a while

@SweetProjectCars

3 жыл бұрын

Glad you enjoyed it! Thank you very much for watching and sharing, we appreciate it Trevor. Have a fantastic day. mad Mike the hammer SPC

I just did this on my 2003 Chevy Silverado. The windows had been running pretty slowly. I doubt the original owner ever cleaned them. I did not have your fancy air nozzle 😊, but I used a computer can of air. By golly, they are working so much better!! THANK YOU!!!! ❤❤

@SweetProjectCars

5 ай бұрын

Thanks for sharing and glad we could help!! mad mike

Hello All our Great Sweet Project Cars Friends! We have a great way to help take the load off your window motors by allowing the glass to move more freely and in turn last longer. We hope You enjoy and find great value in it. Have a great Weekend everyone. Also, Check out our Newest Channel for motorcycles... Sweet Scoots

@pgdmed

6 жыл бұрын

Can you please do a video on how to fix slow seat belts? When I get out my car its really slow to coil back in. Thank you

@gtoboss600

6 жыл бұрын

As long as we are on the subject of power windows... I have an annoying issue that you may have a trick for! When it gets super cold out (Northeast Winters) my window likes to freeze shut. You have to wait for the cabin to warm up on the truck so the window "thaws" out and will go down. It sure would be nice just to hit the switch like summer time and have the window go down! Any suggestions? I am sure I am not the only one with this annoyance, maybe it's video worthy if there is a simple solution?

@KBzPTGT

6 жыл бұрын

This vid should help with that freezing. It acts as a moisture barrier. Also make sure the rubber weather seal surrounding the upper window is well conditioned so as to NOT trap water to freeze.

@Coco-Crisp25

6 жыл бұрын

I love your videos. I have a power window that goes down fine but comes up a few inches at a time. Any suggestions??? Ps- we love Rottweilers in our home :)

@youngvantesince8212

5 жыл бұрын

Why do you use rainx water repellent? Just curious..

Ya I definitely can’t wait 10 seconds for my windows to open and close! OK I’ll admit, it actually does really annoy me... thanks for an easy fix!🤣

@SweetProjectCars

3 жыл бұрын

LOL, thanks for watching and commenting Blakehx. Hope you have a great day. mad Mike the hammer SPC

Been watching for awhile now & love it. Keep up the outstanding videos. 👍

@SweetProjectCars

6 жыл бұрын

david we will do our best and thank you very much :)

Videos like this is why I am a subscriber. Keep up the good work!

@SweetProjectCars

6 жыл бұрын

tim thank you, very much for the great and kind comments, we are very glad you are here with us :)

Just tried this trick out, and it 100% worked for my window! My passenger window rolls up as fast as my driver side now. I was hoping this would also fix how my window is slightly crooked when fully rolled up, but that's probably a different issue.

@SweetProjectCars

6 жыл бұрын

thank you Vicious glad to help and glad you are here with us :) and your crooked window would be an inner door track issue.

Thank GOD for "Old Fashion" Tried & True Crank Windows on my 2002 S10 SPORT...

@SweetProjectCars

3 жыл бұрын

LOL, true! Thanks for watching Steve, we appreciate it. Have a great day. mad Mike the hammer SPC

My window had issues for years. This helped! It is working almost like new now. I have a 2003 Crown Vic.

@SweetProjectCars

3 жыл бұрын

Thank you so much Keith for watching and sharing your great results! Hope you have a fantastic day my friend. mad Mike the hammer SPC

What a great video. I can hardly wait for it to warm up a little outside so I TOO can have speedy windows. I'm so glad I subscribed to your channel. I appreciate you so much. THANKS.

@SweetProjectCars

6 жыл бұрын

Mark we are very glad to help, and you are very welcome my friend, we are very glad to have you here with us !!

Thanks for making sure we don’t know what type of wd-40 lube you used.

@SweetProjectCars

3 жыл бұрын

Hello Simon99, it's this amzn.to/2CV0n7o no intent to hide anything, and just a reminder, all of the products/tools we use in ALL of our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will be happy to help you. Thanks for watching and kindly asking. Hope you have a blessed day. mad Mike the hammer SPC

@raygunn4392

Күн бұрын

It’s called WD-40 specialist dry lube with PTFE.

I've used spray silicon for years, works amazing! Great video as always

@SweetProjectCars

6 жыл бұрын

thank you Steve glad to help and glad you are here with us :)

@bigal2417

3 жыл бұрын

Or WD40 I would think works.

@lordjaashin

3 жыл бұрын

@@bigal2417 wd40 collects dust, right?

@bigal2417

3 жыл бұрын

@@lordjaashin dont know, so u think that wont work ?

@DVSUte

3 жыл бұрын

@@lordjaashin what does not ?

Wow!! That's insane! I'm going to do this for the poor old mommivan. How simple and fast and effective! Thank you! Thank you! 😁

@SweetProjectCars

6 жыл бұрын

you are very welcome Trish thank you so much for being here with us :)

My skeptical engineering mind was completely blown away. Just purchased my son a used car and the drivers side window rolled down very slowly. I was thinking window motor but thought I would try your method. Truly unbelievable. DRAMATIC difference and completely amazed! I did find it easier and less messy to soak the cloth first and apply the RainX but other than that I followed your instructions to the letter and again completely amazed. Thank you sir!

@SweetProjectCars

Жыл бұрын

Glad we could help Eric! Thank you for watching and sharing your ideas, we really appreciate it, have a great week my friend. mad Mike the hammer SPC

YOURE THE BOMB

@SweetProjectCars

6 жыл бұрын

toosweet thank you very much my friend :)

The dislikes are from the people that would prefer that something so easy wouldn't work

@SweetProjectCars

3 жыл бұрын

We're with you on that my friend. Thank you for watching and sharing. Hope you have a great day. mad Mike the hammer SPC

@johnmartinez7440

3 жыл бұрын

...what?

@SweetProjectCars

3 жыл бұрын

John what do you mean What ? What don’t you understand?

@honestguy7764

3 жыл бұрын

or jealous because they have crank windows!

@ModernGentleman

3 жыл бұрын

Or people who watched until he said we needed "this specific special lubricant" then hid the lubricant needed.

Super impressive! Great job!!!

OMG,I followed your procedures and I`m so so very impressed...So much better...

@SweetProjectCars

3 жыл бұрын

Great to hear! Thank you for watching and sharing Rickie! Have a fantastic day. mad Mike the hammer SPC

I was waiting for him to bring out the mothers.

@SweetProjectCars

6 жыл бұрын

Thanks Jason crazy part about the products we use is they can do so many different things on a person‘s car that they never thought of. Have a great day

Please do inside the door. I'm getting ready to pull mine door panels off to replace the door locks and would like to do it all at once. Thanks.

@SweetProjectCars

6 жыл бұрын

we will do the video for you and many others thanks for asking my friend :)

Holy crap! I was thinking my motors were wearing out. You Sir are a gift from God! I’ve got a detail scheduled to the the tune of $325, I bet they don’t even touch the windows other than cleaning the glass.

@SweetProjectCars

3 жыл бұрын

Glad I could help, and I bet they don't my friend. Thanks for the view and comment, we really appreciate it Kelly. Hope you have a great week. mad Mike the hammer SPC

That was an awesome piece of information. I will be using this trick asap on my 80's collector car.

@SweetProjectCars

3 жыл бұрын

Glad it was helpful! Thank you for watching and sharing, we appreciate it. Hope you have a great day. mad Mike the hammer SPC

I don’t believe my eyes

@SweetProjectCars

3 жыл бұрын

Thanks for watching. Have a great day. mad Mike the hammer SPC

SOME BAD ASS SHIT. MONEY SAVER. LOVING IT THANK'S!😆

@SweetProjectCars

6 жыл бұрын

soul thank you very much my friend :)

.Sweet. Who would've thought about this working so simply.

I knew about the silicon spray trick, but not the cleaning the track. Thank you! Mike

@SweetProjectCars

3 жыл бұрын

Glad to help, thanks for your comment my friend. Have a great day. mad Mike the hammer SPC

Can you do a video about a full engine detail which is cheap and less time consuming but gives the same results as a concours show stand job.

@SweetProjectCars

6 жыл бұрын

vikings we will see what we can do for you on the engine compartment detailing thank you my friend :)

@vikingraiders4138

6 жыл бұрын

Sweet Project Cars Thank you much appreciated.

@SweetProjectCars

6 жыл бұрын

you are very welcome :)

Make the video of door apart yes

@SweetProjectCars

6 жыл бұрын

that video is coming up my friend thank you for your great comments and being here with us :)

Great tip. Just did it to my Peterbilt semi's windows worked great. Thank you sir.

@SweetProjectCars

3 жыл бұрын

Glad it helped my friend! Thank you for watching and sharing, we really appreciate it. Hope you have a great day. mad Mike the hammer SPC

Captain, this tip is absolutely great!!!

@SweetProjectCars

3 жыл бұрын

Thank you very much Michael, we really appreciate it. Hope you have a great day. mad Mike the hammer SPC

🤷🏽‍♂️And just think the whole time I thought the saying was, "if you don't use it, you lose it"🧐🤣

@SweetProjectCars

3 жыл бұрын

Thanks for watching. Have a great day. mad Mike the hammer SPC

And the faster it rolls up the better because If someone reaches in to steal something while you’re at a light, the better chance you’ll have of locking their arm in and dragging them down the street.

@SweetProjectCars

3 жыл бұрын

LOL, that is true!! Thanks for watching and for the chuckle this morning. Hope you have a great day. mad Mike the hammer SPC

@dr.brinebasterd8982

3 жыл бұрын

Grind the legs off those thieves

@Enforcer_WJDE

3 жыл бұрын

I did this to my newish car and now the windows popped through the rocker panels that's how fast they went.

@seanmacattram9320

3 жыл бұрын

Sean

I've done this and it works. I helped my officemates who were having the same issues with their windows. Fixed the problems during 15 minute coffee break.

@SweetProjectCars

3 жыл бұрын

Nice!! Thank you for watching and sharing your results Joseph, we appreciate it. Hope you have a great day. mad Mike the hammer SPC

great video with good info that I can use. Thank you.

Never seen something like this done before. Do you think this will stop my windows from squeaking everytime I put them up and down? Lol

@SweetProjectCars

3 жыл бұрын

Sure will! Thanks for watching and asking. Have a great day. mad Mike the hammer SPC

@BMW_nation

3 жыл бұрын

Use superglue, it will lubricate the rubber trim better than wd40 or anything else

@anonymous12593

3 жыл бұрын

@@BMW_nation maybe blinker fluid after that 🙄

@ForidKhan123

3 жыл бұрын

@@BMW_nation 🤣🤣

@drewj3329

3 жыл бұрын

A piece of tape on edge saturated in silicone can clean the track below the window run..

Not trying to be rude any doing the lube might work but you are not getting enough of voltage to the window motors with the vehicle off. You should have the vehicle running. Most likely you will have about 13-14v when running under draw without running you might be 9-10

@SweetProjectCars

6 жыл бұрын

thank you very much, but the window did this weather the car was running or not...we talked to the customer about it and we were correct in our assumption, their son always sat in the back on the passenger side of the car so the back drivers side window was not used whatsoever that's why they all worked well but the one we did the video on. thanks my friend for your great comment

@harryl7946

6 жыл бұрын

I thought the same problem but the window was operated under the same voltage both times. And having said that I am doing all my windows this weekend. 👌🏼

@SweetProjectCars

6 жыл бұрын

SGT you nailed it my friend thank you for your great comments and being here with us :)

@SweetProjectCars

6 жыл бұрын

Harry you will love the results thank you for your great comments and being here with us :)

@Vistal11

6 жыл бұрын

gotshirts2ink doesn't matter if it's off or on. If it's slow when it's off .. it may be 10% faster when the cars on. So after it's 50% faster off and 60% when the cars on.. same difference.

Definitely going to try this. Thanku so much Sir. 🙏

@SweetProjectCars

3 жыл бұрын

Awesome! You will love the results. Thank you for watching and sharing my friend. Have a great afternoon. mad Mike the hammer SPC

Hey buddy what a great way to clean and make the glass function better!! Thx a lot bro!!

@SweetProjectCars

3 жыл бұрын

Happy to help Zubair! Thank you for watching and commenting. Have a fantastic day my friend. mad Mike the hammer SPC

that's the MOTHER in law window it can stay right up !!

@SweetProjectCars

6 жыл бұрын

LOL! Awake that's a good one thank you for your great comments and being here with us :)

Gotta love it, how to make window fast but the line @2:40 "Now "YOU" take the special lubricant "WE" use and it is not an oil base by any means it is a dry lubricant" ...AND doesn't share what the lubricant actually is??? I could make out it's a product by WD40 but WTF couldn't manage to show it/or say the name of this "special lubricant" which I suspect is a major part of this "how to Video"

@toddwessells

12 күн бұрын

He did. It's wd40 dry lube. I guess if you don't know wd40 products it might be confusing but come on all you have to do is type wd40 dry lubricant into Google and bam there it is. Would have taken you alot less time to do that than it did to post this pointless comment. ☣️

Sure am glad that I found your channel, you're a blessing for the diyer

@SweetProjectCars

3 жыл бұрын

Our pleasure! Thanks so much for being here with us, we really appreciate it. Have a great day. mad Mike the hammer SPC

Another thing I wouldn’t have thought of. Thanks again.

@SweetProjectCars

6 жыл бұрын

stranger thank you for your great comments and being here with us :)

The saying is use it or lose it lol

Thank you. It is the little things that make life so much better.

@SweetProjectCars

3 жыл бұрын

Couldn't agree more! Thank you so much for watching and commenting, we truly appreciate it Elma :) Hope you have a great day. mad Mike the hammer SPC

impresive, i always have a clue but finally i have the certain thanks for you, I always believed that the engine becomes weak over the years but this must also contribute to the engine wearing out, thank you very much!

@SweetProjectCars

Жыл бұрын

Happy to help. Thank you for watching and commenting, have a fantastic day my friend. mad Mike the hammer SPC

You have helped a lot of people out. Many thanks

@SweetProjectCars

6 жыл бұрын

208 thank you for your great comments and being here with us :)

Thank you for your time!!! Got your self a follower!!!

@SweetProjectCars

6 жыл бұрын

Milton Jasso thank you very much :) and we are glad to have you !!

Love love love your videos, I look forward to each new one

@SweetProjectCars

6 жыл бұрын

Mike thank you for your great comments and being here with us :)

Wow !! Thanks amigo. Greetings from Texas.

@SweetProjectCars

3 жыл бұрын

You're welcome! Thank you for watching and sharing Magdaleno, we truly appreciate it. Welcome Texas, hope you have a great weekend. mad Mike the hammer SPC

Wow never thought of doing this! I’ll be trying this tomorrow on my weak 98 XJ windows see if I can get them moving faster! Thank you for sharing your tips!

@SweetProjectCars

3 жыл бұрын

Absolutely, it's our pleasure! Thank you so much for watching. Hope you have a great day Arthur. mad Mike the hammer SPC

@vadimnesen8060

2 жыл бұрын

Did it work?

Thanks for the video. I took a toothbrush I had from the .99 cent store and ran it up and down both channels and my window went up and down much faster. I did use the Rainex and dry lube after that. Now don't have to worry about burning out another window motor.

@SweetProjectCars

2 жыл бұрын

Awesome EU! Thanks for watching and sharing, hope you have a great day my friend. mad Mike the hammer SPC

Great video, i will be doing my car very soon. Thanks for the tips.😎💪💪💪👍

@SweetProjectCars

6 жыл бұрын

Alberto thank you for your great comments and being here with us :)

Nice video, really helpful. Thanks!!

I like it , cheap and cheerful with a little bit of effort = big rewards . That's me

@SweetProjectCars

3 жыл бұрын

Right on Robert! That's how we roll and what we like to share with our great subscribers :) Hope your day is the best! mad Mike the hammer SPC