On this weeks lure build we make the perfect Glide Bait. Nothing better then watching the action of a glide bait in the water.
Жүктеу.....
Пікірлер: 84
@ureasmith3049 Жыл бұрын
Brilliant! Thanks for sharing the process mate!
@TradIrishHarper Жыл бұрын
Absolutely gorgeous glide bait
@fishingwithjollip
Жыл бұрын
Cheers
@barrettbryan89055 ай бұрын
Turned out awesome and wicked paint job! Cheers pal and thanks for sharing!
@fishingwithjollip
5 ай бұрын
Thanks for watching
@pauljohns8215 Жыл бұрын
Great work, you’re a master
@troycote4503 Жыл бұрын
That's the Negotiator. The Mother's like 12 inches. Nice work! That's money. I'm thinking of trying my hand at it. I might mold it first. My friend is Joey Lanciotti and he makes some incredible baits!
@fishingwithjollip
Жыл бұрын
100% bang on mate sure is my mistake in the vid. Awesome yes he makes fantastic lures.
@FishingWithTroyBoulton2 жыл бұрын
That’s an Awesome lure mate can’t wait for the next vid 👌
@fishingwithjollip
2 жыл бұрын
Cheers mate
@Woodyisfishing2 жыл бұрын
Great work 👏
@fishingwithjollip
2 жыл бұрын
Cheers mate
@pitbullcustomlures19172 жыл бұрын
Thats a high quality glide that one mate, great job 🙌
@fishingwithjollip
2 жыл бұрын
Cheers mate
@colinfardon57162 жыл бұрын
Nice job mate, bait turned out perfect!
@fishingwithjollip
2 жыл бұрын
Cheers mate
@fishing_with_stewy5103 Жыл бұрын
So bloody good mate , great work 👏
@fishingwithjollip
Жыл бұрын
Cheers legend.
@Mickey_Z2 жыл бұрын
Awesome work Mate!!!
@fishingwithjollip
2 жыл бұрын
Cheers mate
@prawn.dealerАй бұрын
looks so sick mate. that pectroral fin looks mint.
@pointbreakfish Жыл бұрын
Great Vid Joey 🔥🔥
@fishingwithjollip
Жыл бұрын
Cheers mate
@christophershelton1735 Жыл бұрын
Beautiful
@fishingwithjollip
Жыл бұрын
Cheers
@gaanjuit404 Жыл бұрын
Tnx 4 sharing ❤
@paulvout42672 жыл бұрын
Nice work mate 👍
@fishingwithjollip
2 жыл бұрын
Cheers
@waynesammyswingle6107 Жыл бұрын
I'll be honest, when you said you were going with a drip pattern I thought it was going to ruin the lure. Terrible foresight on my part. I can't believe how great it came out. I love it!
@fishingwithjollip
Жыл бұрын
Cheers for the feedback 👌🏻
@user-ii4tf8oy9g
10 ай бұрын
You couldn’t just see the thumbnail? 😂
@TheArtisticAngler Жыл бұрын
I would suggest using a angled block of wood and a handsaw to cut the joint when it is still square. Epic bait man!!
@fishingwithjollip
Жыл бұрын
Cheers I just prefer doing them in the bandsaw.
@TheArtisticAngler
Жыл бұрын
👍
@Pyrexia333
Жыл бұрын
@@TheArtisticAnglerI've been following u for a while now! That's great advice btw, just like Marling uses with the magnets!
@briangodbold7604 Жыл бұрын
Great lure…
@fishingwithjollip
Жыл бұрын
Thanks
@eddieelling4329 Жыл бұрын
that’s awesome work I’ve been making my own for probably 10 years but I haven’t really got fully involved in it. I mean I want to make some more but I’m doing everything out of Balsawood and some broomstick handles and stuff like that the weighted word is what I’m honestly concentrating on because then you don’t have to add no white to it it’ll be like natural Weighted kinda. I just need to get airless spray rig. I need to know where you get all the mesh the different patterns and so forth and where do you buy the paints at and I need to get the clearcoat as well
@nathansoutbackfishing2 жыл бұрын
Congrats on 1k
@fishingwithjollip
2 жыл бұрын
Cheers mate
@nathansoutbackfishing
2 жыл бұрын
@@fishingwithjollip all good
@michaelmoore24983 ай бұрын
Nicely done. Trying to figure out how you attach the half's together? With a pin?
@treyurban36265 ай бұрын
Pretty bait. Any tips on what to do when a glide only turns one way. Hinges are nice and free and it sinks level.
@mattsmith352 жыл бұрын
Looks up unreal
@fishingwithjollip
2 жыл бұрын
Thanks mate
@waynecryer6894 Жыл бұрын
Love your work looks mad . Would be cool if you could make a big square bill suspending crankbait that you can twitch and pursue for shallow water or shore based inpoundment cod . I'm thinking 3mt max . what do you think ?
@fishingwithjollip
Жыл бұрын
Hi mate we do a 110mm square bill called the Ripper110sr. They float but are deadly around the gorge country
@stasiukasa Жыл бұрын
I love how you make glide bait. What kind of wood did you use?
@fishingwithjollip
Жыл бұрын
That’s jeleutong mate
@jacob.1684 Жыл бұрын
What gear ratio reel do you like for glide bait fishing also great video
@fishingwithjollip
Жыл бұрын
I just use my 6.3 that I use for everything else mate
@busterharrill72672 жыл бұрын
Fantastic work! How did you make your connection between the front and the rear section. Please show us how you did that. Very important to the action.
@fishingwithjollip
2 жыл бұрын
Hi mate If you look back at the last lure build swimbait video it’s how’s the joint in more detail.
@stephenlatimer14282 жыл бұрын
nice roman made joey. i have the roman made negotiator n still use it, but not often. sweet glide mate. wats the length n weight Joey. congrats on the 1K.
@fishingwithjollip
2 жыл бұрын
There a cool bait It’s came it at 160mm and 60g Cheers mate
@stephenlatimer1428
2 жыл бұрын
@@fishingwithjollip nice size n weight for big flathead. interested in the glide for the up coming spring/summer. wen u have time mate messenger me with color range n price pls.
@dalefurrer34864 ай бұрын
I'm not familiar with the wood you mentioned. What could we use in the US?
@kings_nemesis5995 Жыл бұрын
What size drill bit did you use for the line tie and hook hangers
@fishingwithjollip
Жыл бұрын
I think it was 2 mm That suits 1.1mm twisted wire fine
@168amax Жыл бұрын
just a tip drill you eye with 2mm drill before cut out then eye is in same spot
@VinhWasted86 Жыл бұрын
What do you use to prime and seal?
@peatographee5428 Жыл бұрын
What size band saw blade do you use?
@fishingwithjollip
Жыл бұрын
I’ll double check on that one and back to you
@nickkelly7800 Жыл бұрын
What sort of wood are you using?
@fishingwithjollip
Жыл бұрын
That’s jeleutong mate
@benjamingrue51015 ай бұрын
bonjour .quel type de bois utilisez vous pour ce genre de leurre svp?
@bsouthrn Жыл бұрын
What machine was that, that made the bait steam?
@jimmyjones2426
Жыл бұрын
Dude it was just hot lead (dropped out of the lead pot) being placed into the water to test buoyancy
@barles27027 ай бұрын
What wood did you use?
@fishingwithjollip
6 ай бұрын
Jelutong mate
@River_Savage Жыл бұрын
Awesome glide and paint job. Where did you get that cool stencil at? Everyone I see looks lame compared to yours haha.
@fishingwithjollip
Жыл бұрын
Cheers mate. I just buy them of a guy online. Send me a em on Facebook and I’ll find his contact.
@River_Savage
Жыл бұрын
@Fishing with Jollip you got it. Thanks man!
@deanboulton79802 жыл бұрын
Build some kingfish tuna lures 140- 160mm out of wood
@fishingwithjollip
2 жыл бұрын
Watch this space
@davidwright86094 ай бұрын
Do you have a print of this lure?
@ericneedham3136 Жыл бұрын
Just some helpful tricks and advice from someone who has their own glidebait. Weigh each section separately with all the hardware, mark and start your joint cut 3/4 of the way while it has square sides before you start sanding and carving the bait. Still room for improvement as always but looks great none the less!🤘
@andrewsparrowey9157 Жыл бұрын
Friend, what kind of wood do you use to make a bait layout?
@fishingwithjollip
Жыл бұрын
Hi that’s jeleutong
@nathankrueger35869 ай бұрын
😅
@fishing8one529 Жыл бұрын
you didn't video all the steps, that sucks. I wanted to see how you actually hinged both pieces together.
@fishingwithjollip
Жыл бұрын
I’ll show it in another video mate.
@user-ii4tf8oy9g10 ай бұрын
All that work for nothing. 🤦♂️ you were supposed to seal the bait after you drilled the lead hole but before you added lead. You put naked wood in the water that’s not good
@fishingwithjollip
10 ай бұрын
Just wondering how you figure there’s naked wood in the water. Once the lead is in and the primer and clear had covered the lead there’s no way water can enter the wood. Only way for this top happen is if your using a clear coat that’s not compatible with your other products and it peals or cracks. If your referring to when i testing it the lure os dried out before any primer goes on.
Пікірлер: 84
Brilliant! Thanks for sharing the process mate!
Absolutely gorgeous glide bait
@fishingwithjollip
Жыл бұрын
Cheers
Turned out awesome and wicked paint job! Cheers pal and thanks for sharing!
@fishingwithjollip
5 ай бұрын
Thanks for watching
Great work, you’re a master
That's the Negotiator. The Mother's like 12 inches. Nice work! That's money. I'm thinking of trying my hand at it. I might mold it first. My friend is Joey Lanciotti and he makes some incredible baits!
@fishingwithjollip
Жыл бұрын
100% bang on mate sure is my mistake in the vid. Awesome yes he makes fantastic lures.
That’s an Awesome lure mate can’t wait for the next vid 👌
@fishingwithjollip
2 жыл бұрын
Cheers mate
Great work 👏
@fishingwithjollip
2 жыл бұрын
Cheers mate
Thats a high quality glide that one mate, great job 🙌
@fishingwithjollip
2 жыл бұрын
Cheers mate
Nice job mate, bait turned out perfect!
@fishingwithjollip
2 жыл бұрын
Cheers mate
So bloody good mate , great work 👏
@fishingwithjollip
Жыл бұрын
Cheers legend.
Awesome work Mate!!!
@fishingwithjollip
2 жыл бұрын
Cheers mate
looks so sick mate. that pectroral fin looks mint.
Great Vid Joey 🔥🔥
@fishingwithjollip
Жыл бұрын
Cheers mate
Beautiful
@fishingwithjollip
Жыл бұрын
Cheers
Tnx 4 sharing ❤
Nice work mate 👍
@fishingwithjollip
2 жыл бұрын
Cheers
I'll be honest, when you said you were going with a drip pattern I thought it was going to ruin the lure. Terrible foresight on my part. I can't believe how great it came out. I love it!
@fishingwithjollip
Жыл бұрын
Cheers for the feedback 👌🏻
@user-ii4tf8oy9g
10 ай бұрын
You couldn’t just see the thumbnail? 😂
I would suggest using a angled block of wood and a handsaw to cut the joint when it is still square. Epic bait man!!
@fishingwithjollip
Жыл бұрын
Cheers I just prefer doing them in the bandsaw.
@TheArtisticAngler
Жыл бұрын
👍
@Pyrexia333
Жыл бұрын
@@TheArtisticAnglerI've been following u for a while now! That's great advice btw, just like Marling uses with the magnets!
Great lure…
@fishingwithjollip
Жыл бұрын
Thanks
that’s awesome work I’ve been making my own for probably 10 years but I haven’t really got fully involved in it. I mean I want to make some more but I’m doing everything out of Balsawood and some broomstick handles and stuff like that the weighted word is what I’m honestly concentrating on because then you don’t have to add no white to it it’ll be like natural Weighted kinda. I just need to get airless spray rig. I need to know where you get all the mesh the different patterns and so forth and where do you buy the paints at and I need to get the clearcoat as well
Congrats on 1k
@fishingwithjollip
2 жыл бұрын
Cheers mate
@nathansoutbackfishing
2 жыл бұрын
@@fishingwithjollip all good
Nicely done. Trying to figure out how you attach the half's together? With a pin?
Pretty bait. Any tips on what to do when a glide only turns one way. Hinges are nice and free and it sinks level.
Looks up unreal
@fishingwithjollip
2 жыл бұрын
Thanks mate
Love your work looks mad . Would be cool if you could make a big square bill suspending crankbait that you can twitch and pursue for shallow water or shore based inpoundment cod . I'm thinking 3mt max . what do you think ?
@fishingwithjollip
Жыл бұрын
Hi mate we do a 110mm square bill called the Ripper110sr. They float but are deadly around the gorge country
I love how you make glide bait. What kind of wood did you use?
@fishingwithjollip
Жыл бұрын
That’s jeleutong mate
What gear ratio reel do you like for glide bait fishing also great video
@fishingwithjollip
Жыл бұрын
I just use my 6.3 that I use for everything else mate
Fantastic work! How did you make your connection between the front and the rear section. Please show us how you did that. Very important to the action.
@fishingwithjollip
2 жыл бұрын
Hi mate If you look back at the last lure build swimbait video it’s how’s the joint in more detail.
nice roman made joey. i have the roman made negotiator n still use it, but not often. sweet glide mate. wats the length n weight Joey. congrats on the 1K.
@fishingwithjollip
2 жыл бұрын
There a cool bait It’s came it at 160mm and 60g Cheers mate
@stephenlatimer1428
2 жыл бұрын
@@fishingwithjollip nice size n weight for big flathead. interested in the glide for the up coming spring/summer. wen u have time mate messenger me with color range n price pls.
I'm not familiar with the wood you mentioned. What could we use in the US?
What size drill bit did you use for the line tie and hook hangers
@fishingwithjollip
Жыл бұрын
I think it was 2 mm That suits 1.1mm twisted wire fine
just a tip drill you eye with 2mm drill before cut out then eye is in same spot
What do you use to prime and seal?
What size band saw blade do you use?
@fishingwithjollip
Жыл бұрын
I’ll double check on that one and back to you
What sort of wood are you using?
@fishingwithjollip
Жыл бұрын
That’s jeleutong mate
bonjour .quel type de bois utilisez vous pour ce genre de leurre svp?
What machine was that, that made the bait steam?
@jimmyjones2426
Жыл бұрын
Dude it was just hot lead (dropped out of the lead pot) being placed into the water to test buoyancy
What wood did you use?
@fishingwithjollip
6 ай бұрын
Jelutong mate
Awesome glide and paint job. Where did you get that cool stencil at? Everyone I see looks lame compared to yours haha.
@fishingwithjollip
Жыл бұрын
Cheers mate. I just buy them of a guy online. Send me a em on Facebook and I’ll find his contact.
@River_Savage
Жыл бұрын
@Fishing with Jollip you got it. Thanks man!
Build some kingfish tuna lures 140- 160mm out of wood
@fishingwithjollip
2 жыл бұрын
Watch this space
Do you have a print of this lure?
Just some helpful tricks and advice from someone who has their own glidebait. Weigh each section separately with all the hardware, mark and start your joint cut 3/4 of the way while it has square sides before you start sanding and carving the bait. Still room for improvement as always but looks great none the less!🤘
Friend, what kind of wood do you use to make a bait layout?
@fishingwithjollip
Жыл бұрын
Hi that’s jeleutong
😅
you didn't video all the steps, that sucks. I wanted to see how you actually hinged both pieces together.
@fishingwithjollip
Жыл бұрын
I’ll show it in another video mate.
All that work for nothing. 🤦♂️ you were supposed to seal the bait after you drilled the lead hole but before you added lead. You put naked wood in the water that’s not good
@fishingwithjollip
10 ай бұрын
Just wondering how you figure there’s naked wood in the water. Once the lead is in and the primer and clear had covered the lead there’s no way water can enter the wood. Only way for this top happen is if your using a clear coat that’s not compatible with your other products and it peals or cracks. If your referring to when i testing it the lure os dried out before any primer goes on.