For a second I thought that fist was a massive bass 😂😂😂😂

Nice build. There are not many small glide baits on the market. I may take a stab at this…..your videos are definitely clear enough to be instructional. Thanks for sharing the results of all your work.

I’ve scoured the internet for a glide just like this. I’m in small mouth country up in Oregon. These would be amazing up here. Fantastic vid!!

Привет из Кыргызстана,💯💯💯💯💯💯💯💯💯💯💯💯💯% лайк!!!!!!!!, особенно мне понравилось нанесение чешуек!!!!!!!!!!!!

That little scale pattern jig is genius!

@lureup9973

2 жыл бұрын

Thank you

Happy I found your channel! I've been making my own lures recently and decided to look up some glide bait builds. This video popped up so I decided to check it out. Awesome video!

@lureup9973

2 жыл бұрын

Thank you

Loved it. Great look and action.

@lureup9973

2 жыл бұрын

Thank you

Cleaver to use screen for scales definition. Perfect!

Awesome as usual! Love the video

@lureup9973

3 жыл бұрын

Thank you James!

That action looked perfect!

@lureup9973

2 жыл бұрын

Thank you!

nice vid , great tip with the treble placement.

@lureup9973

3 жыл бұрын

Thank you!

Great video

That was the best intro I have ever seen

Well done, excellent work

@lureup9973

2 жыл бұрын

Thank you !

I like this build. Was wondering if u tried it in an area without current. As you know current has a significant affect on how the lure behaves. I would be interested in how it looked in a test tank ie. Sink rate, was it sitting level in the water. Etc. Explaining your line tie placement would also be helpful. Nice build.

Intro was killer lol

This is the first video of yours I’ve seen and I really enjoyed it. Great job on the little glide! I live and fish in East Tennessee and that little dude would wreak havoc on the big river smallmouth around here. Would love to have one. Have you considered making a mold and casting resin baits from this?? I’m fairly new to bait making and I’ve been working on getting a couple larger swimbait prototypes of mine dialed in over the last year or so and it’s the tiniest of details that matter that can make or break the action your looking for. Again, awesome job on getting a lure this small to glide and slice through the water so nicely, especially considering the current. I look forward to watching your channel grow. Best wishes for your future success👍🏻

@lureup9973

3 жыл бұрын

Thanks so much for the kind words!...I fish East Tennessee too!...yes you are so right..the tiniest details make all the difference in bait performances...I do make some larger glides, and am considering the smaller one, just not sure if it will bring the price for the effort...thanks again for the nice words!

Your work is amazing and your are funny as all get out

Looks great especially for it's size...the Deps 115 is the smallest jointed glide I've fished and I wasn't impressed. The smallest jointed glide I've made that worked and caught fish was 7 inches. I'm working on some smaller one's too, but they really don't glide as well as when large. Really just kind of swim but no glide. Maybe that's why it took them so long to become a thing? Most lure designs are small and work pretty well at any size, but glides need size to bring out their best characteristics.

@lureup9973

3 жыл бұрын

Thank you!

@reelfunnyfishing651

3 жыл бұрын

Thoughts on the gancraft claw 70?🤔

@lureup9973

3 жыл бұрын

@@reelfunnyfishing651 I’ve never fished it, but did go and look at its action, beautiful bait, but like you said not much mass, not much glide… I’d say in a River one could impart a lot action if you were to work the rod

What is the collaboration with world's worst fishing about? Awesome to hear that you are teaming up! Can't wait!

@lureup9973

3 жыл бұрын

I designed an 8” gizzard shad , built the model, made a mold and then shipped the mold to Chris Jones of world’s worst fishing, and he is gonna pour it, and paint it!

@joehall5487

3 жыл бұрын

Super cool....i gotta get my hands on one!

@joehall5487

3 жыл бұрын

I'm sure it will turn out great that guy is awesome

@lureup9973

3 жыл бұрын

@@joehall5487 👍😎

@joehall5487

3 жыл бұрын

Put a couple of builds on my channel.... not to your level yet but I'm closing in on you brother....lol

Hi Todd, i am new to making lures i like your idea with the pin into the joints, what are the little s/steel pieces you used for the joints ? a top idea, love the video Cheers Aussie Chris.

@lureup9973

3 жыл бұрын

Thank you, the wire pieces I use in the joints are called hook hangers and are commonly used when making crank baits, they can be order from a company called Roscoe inc.

Juiciest intro ever

@lureup9973

3 жыл бұрын

Thank you!

Love that paint job

@lureup9973

3 жыл бұрын

Thanks Joe!

@joehall5487

3 жыл бұрын

Does it matter which half the hinge pin is inserted into??

@lureup9973

3 жыл бұрын

@@joehall5487 yes it changes the pivot point

@joehall5487

3 жыл бұрын

@@lureup9973 have you ever hinged a Glide bait in the back half

@lureup9973

3 жыл бұрын

@@joehall5487 yes, it works on a glide better than a regular swimbait because it limits your degree of mobility if you try to conceal your cut

👍👍👍👍👍

Hello! What material did you make it out of? Love it!

@lureup9973

12 күн бұрын

@@deneskovecses5656 it’s called pvc board it’s used in construction as an exterior trim board, you can find it at Lowe’s or Home Depot

Great video and I love the intro! Has anyone ever told you that you look like actor Jack Coleman (plays the senator in The Office)? Just wondering lol.

Is there a fish paint or does any paint work? I may try to find a airbrush set to make some

@lureup9973

11 ай бұрын

I use paint designed for airbrushes, it needs to have fine pigment and a certain viscosity...I use Vallejo

I'm very curious is that a jig saw that you mounted upside down ? I've been thinking of trying that since I don't have a band saw. If it is a jig saw do you have any tips ?

@lureup9973

Жыл бұрын

Yes ....sorry I missed this

lmfao that intro, easy sub.

@lureup9973

Жыл бұрын

Thank you

What wood did you use in this video looks nice

@lureup9973

3 жыл бұрын

Thank you, it’s actually pvc board used in exterior trim when building homes...Home Depot and or Lowe’s carry it!

@LeviVanSluijs

3 жыл бұрын

@@lureup9973 thanks, I already was thinking like how does is have almost no grain structure

After you cut it in half what do you use to connect it back together

@lureup9973

Жыл бұрын

Store bought hook hangers from a lure component website… I believe it was lure parts online or Jann’s net craft

What kind of wire fo you use?

@lureup9973

Жыл бұрын

I use eyelets/ hook hangers for hinge and just hardened stainless for pin

How thick is the wood

@lureup9973

Жыл бұрын

The wood is a pvc board that is almost 3/4” thick

What is that rotary bit tool called?

@lureup9973

3 ай бұрын

I’m not sure, there is one laying on my bench that is a 1/4” grinding bit, and the smaller steel bit in the dremel tool is similar to a 3/32” end mill

What material use For the lures ?

@lureup9973

2 жыл бұрын

I use pvc board, usually available at construction supply stores like Lowe’s

A great job can i order one

@lureup9973

2 жыл бұрын

Sorry it not selling them yet

Rather than breathing in lead fumes, just cut it. It's extremely soft

For a small bait like that, you can probably get away without using a rear treble hook. The action of the lure will be much better.

@lureup9973

3 жыл бұрын

Interesting you say that!… I usually drop the rear hook when I make baits if I think I’ll get better action, for some reason I did not think of that….might have to try that!… thanks for the input!

@paulrichards1921

3 жыл бұрын

@@lureup9973 Your baits are great. It is just a matter of time before you have a huge following.

@lureup9973

3 жыл бұрын

@@paulrichards1921 thank you, I sure appreciate your support!

Do you have prints of this?

@lureup9973

4 ай бұрын

I do not

You do not soac that wood in water to check weight. That piece of that wood hawe to be painted with clear water resistance paint and cure, and than check for needed weight. Other way that wood will suck water and get wet. Than you hawe to dray it which will make a lot of waisting time.

@lureup9973

Жыл бұрын

The wood is actually a form of waterproof pvc plastic, it does not absorb water when left without a coating

What kind of playtime is the tail

@lureup9973

Жыл бұрын

The tail is made from.032Lexan(polycarbonate)

Making the Smallest GlideBait Ever | One Day Build to Catch Marling Baits

i need like 5

Can you just make me 5 of those lol and I’ll 💰 loll

M

B

@lureup9973

Жыл бұрын

Thats way better than I did at school, so I’ll take it👍😉

what is the white body material used in this video.

@lureup9973

Жыл бұрын

Hello Mike, it’s pvc board available at most large lumber suppliers, it’s used as exterior trim on construction projects like homes

@mikelanford6891

Жыл бұрын

thank you. great video