Neighbor Kid: Daddy, the weird Guy over there is bathing his plastic stuff again...

@flioink

4 жыл бұрын

Neighbor Kid's Dad: Shut up junior - that man is a legend!

@bitterjames

4 жыл бұрын

Neighbor Kid's Brother: okay boomer

@army6669990101

4 жыл бұрын

Neighbor Kid's Sister: The future is now old man.

@R_C420

4 жыл бұрын

Neighbor kid's mom: lives in Austin with "other dad".

4 жыл бұрын

There was even some "investigation" here, in the local TV news, why people put "old computers bathing in water to the sun". It was very funny to watch, TV people trying to figure out what's going on, with total strange ideas ;-P I guess they didn't ask right people about the "mystery" :)

3:47 This isn't sped up, this is his real scrubbing speed after years of restoring computers.

@niko5008

3 жыл бұрын

@@eiron6490 wut

@dougiebell9944

3 жыл бұрын

@@niko5008 its a joke

@Hi-jv7ew

3 жыл бұрын

Looks like he deleted the comment

@mini-_

3 жыл бұрын

Wax on, wax off!

@danielpowers5891

2 жыл бұрын

_plastic has left the chat_

“I think I can build a contraption to use them safely” Famous last words

@jwhite5008

4 жыл бұрын

Actually it's not THAT dangerous, just put the lamp in a closet and don't open that closet with the lamp on. A second or two of exposure aren't fatal, although should still be avoided. This includes sunbathing without strong sunscreen

@nzoomed

4 жыл бұрын

@@jwhite5008 The biggest danger would to be to your eyes if you look at the light source, especially since its invisible to the eye. An EPROM eraser uses such a light and has a switch that turns the lamp off if you open the drawer.

@NimhLabs

4 жыл бұрын

Wait... is there really a new ElectroBoom video today?

@gmirwin

4 жыл бұрын

Jack White Just locate the switch outside the closet and you’re good.

@VDavid003

4 жыл бұрын

@@nzoomed You mean EPROM with a single e, right? 'cuz an EEPROM is an "Electronically Erasable" PROM, so you don't need an UV light for that.

Step 1: Have a brother with all the tools.

@gorillachilla

4 жыл бұрын

lol

@m.hoseyni5768

3 жыл бұрын

:))

@lamecowear5070

3 жыл бұрын

Word

@ubahnlexi

3 жыл бұрын

i gotchu fam

@ino_mation

3 жыл бұрын

Or at least a Brother label maker

Of all the places this channel could go, i was never expecting Spencer's

@markvickroy6725

4 жыл бұрын

😥😂

@itswift

4 жыл бұрын

Once upon a time, Spencer's was just a shop with stupid shirts, magic tricks, and fart machines. It wasn't always a hard core sex toy shop.......

@KairuHakubi

4 жыл бұрын

Spencer's Gifts! Because you wouldn't want to keep anything here for yourself.

@Christopher-N

4 жыл бұрын

So, you didn't expect a kind of Spencer's inquisition? Nobody expects a Spencer's inquisition!

@pickeljarsforhillary102

4 жыл бұрын

Mall closest to me has Spencer's Gifts right next to Victoria's Secret. COINCIDENCE???? I THINK NOT!!!

“But that’s it for the moment.” Immediately transported my brain to Techmoan.

@picc9000

4 жыл бұрын

As always, thanks for watching.

"It would look great if I had a few more days, but I don't have that." "Four days later..."

@raven4k998

4 жыл бұрын

we don't need no stinking badges

@mina86

4 жыл бұрын

He was referring to the weather.

@raven4k998

4 жыл бұрын

@@mina86we don't need no stinking badges

@MMRYPRDX

4 жыл бұрын

@@raven4k998 we don't need no stinking badges

9:22 That's one low-capacity backup drive.

@billman69

4 жыл бұрын

That has more storage than my pc has ram

@kayabasogul1370

4 жыл бұрын

Thats bad, thats bad

@bachibak

3 жыл бұрын

@@billman69 ouch

@gmansplit

2 жыл бұрын

@@billman69 My man is rocking sub 3 gb ram in 2021 (though maybe/hopefully he has upgraded since this comment in 2019)

@SeeJayPlayGames

2 жыл бұрын

I hope that's a typo. Shouldn't it be 3TB? I haven't seen a hard drive that small in over 20 years.

Only the 8-Bit Guy could make me watch a 20 minute video about making 80s computer stickers.

*sees title of video* "Hey, I'm gonna quote that line from The Treasure of the Sierra Madre in the comments, that'll be SO funny." 1:03 Oh damn.

@The8BitGuy

4 жыл бұрын

what? did I beat you to it?

@valkasolidor6727

4 жыл бұрын

I just watched that film again a month ago and I don't recall any badgers!

@stevenemert837

4 жыл бұрын

I'm devastated. I thought the line read, "Badges? We don't need no stinking badges!" Edit: Got to 1:14. Never mind! Close enough!

@jakublulek3261

4 жыл бұрын

Glad to see people still remember that movie, the best role of Humphrey Bogard (for most, for me his best role is Sabrina).

@ImpetuouslyInsane

4 жыл бұрын

I only know the version from Mel Brooks' "Blazing Saddles". I was wondering if he was gonna use THAT version.

I appreciate you showing your "failures" as well as the successes. I often feel like I'm not always successful at a restoration project and it is nice to see that I'm not the only one who has that problem.

@LilNewo

4 жыл бұрын

Can be quite handy to learn from others mistakes. Like you I wish people would learn to not be ashamed of others seeing them

I love how he casually shows his brothers awesome R2-D2

When I do my badges/labels I always go vector. I use as many sources as possible, get them overlapped with correct perspective in GIMP (image editor) and line them up in InkScape to vectorise. I try my best to source the highest quality print I can, some of my electronics have "battery choke hazard" warning badges that are very small, yes the font is quite remarkably high DPI (I never put them under a microscope to inspect, I should do that!). I tend to keep all my badge vector files too, so if I end up sourcing a better print service I can swap to that and do an even closer-to-original output. Takes hours to get a solid, original looking design - only for most of it to be muddied up at the print.

@LanceMcGrew

4 жыл бұрын

I second that idea. CorelDraw used here at my shop.

@pedrofelck

4 жыл бұрын

I liked the open source software being used!

@LPlFan81

4 жыл бұрын

I still use Paint Shop Pro 7.04 (released in 2000), because it has very easy to use vector layer mode and vector drawing tools you can overlay over bitmap images. After 7.04 version they made a lot of changes both UI and functionality I never got used and it was eventually sold to Corel.

@ZTK-RC

4 жыл бұрын

8-Bit Guy has the most heart but sometimes his craft leaves me wanting. Sometimes he hand-waves terrible quality stuff without just admitting that he simply doesn't have the resources to do it correctly. At some point its like, why bother? I like to imagine that restoration is more detail oriented than this.

@prismstudios001

4 жыл бұрын

Xilefian you go vector? You never go plaid?

There is an restoration channel called Odd Tinkering where he uses a transparent plastic crate wrapped around with UV LED strips for his plastic whitening process (including but not limited to yellowed game consoles and controllers), instead of a bulb light.

@Jadisons

4 жыл бұрын

That channel is my late-night guilty pleasure, I won't lie.

@damianvila

4 жыл бұрын

This is the way.

@AtanvarnoALDA

4 жыл бұрын

That's the exact thing I was going to say! Count on the Hivemind :)

@TheMainCore

4 жыл бұрын

This, was going to say the same.

@TsuNAmI2069

4 жыл бұрын

Oh lol i just posted a reply saying the same thing.. didnt notice yours :) So have a thumbs up :)

I just cannot believe this man's maniacal commitment to detail. I could not care less about these machines, but through his eyes, there is such beauty in this.

"I think it is important to show the mistakes as well as the successes!" *ElectroBOOM has entered the chat server!*

@RequiemDream

4 жыл бұрын

I think I have to rebadge the size of the thing you have between your legs :) I'm just joking :) I like to be funny :)

@calebt8182

4 жыл бұрын

@@RequiemDream tf

@serraramayfield9230

4 жыл бұрын

Requim Dream Not funny, cringe

@xanx3572

4 жыл бұрын

@@RequiemDream wtf dude

@Leymora

3 жыл бұрын

@@RequiemDream It's been 8 months but it still has to be said: b r u h

Be sure to tell your brother to double check the motivator on that R2 unit!

@pickeljarsforhillary102

4 жыл бұрын

He says he's the property of Obi-Wan Kenobi, a resident of these parts...

A difference in yellowing between parts on the same device (if all are original parts of that same unit) is frequently due to different chemical mixing of the plastics during the manufacture of the parts. This is most often seen on the Super Nintendo (SNES) where either the top or bottom shell case (or the cartridge door) is grey, but the other side (top or bottom) is highly yellowed. The chemicals of one plastic part was mixed correctly, and the other part was mixed poorly or unevenly, so the bromine yellowing becomes far more pronounced in only one plastic shell part, even though the entire unit was exposed to the same amount of sunlight. Also, nice to see the "Treasure of the Sierra Madre" (1948) hat-tip at the beginning! (Also paraphrased in 1974's "Blazing Saddles") It's good to know that older (pre-1977) films are still being appreciated, even if it's mostly through their famous quotes. ^_^

@moosemaimer

4 жыл бұрын

Also referenced in UHF. _Badgers?_

@gooseknack

4 жыл бұрын

I've seen that myself on an old MicroBee computer years ago. The top was badly yellowed, but the bottom, was almost normal colour.

@eveappleby2211

4 жыл бұрын

I think he talked about this and the effect that Retrobrite has on pieces like that in another restoration video.

@BCProgramming

4 жыл бұрын

The yellowing is inherent to the ABS plastic itself, not the Tetrabromobisphenol-A added to it.

@bobblum5973

4 жыл бұрын

@@moosemaimer Just in case anyone doesn't get the reference to "UHF", that's the _Weird_ _Al_ _Yankovic_ movie of the same name. So now that means you need to watch it.

Dude.. the quick cut to The Treasure of the Sierra Madre was hilarious.

@TheLordOfNothing

3 жыл бұрын

robertd1965 you’re right!

@charismaticcatholic1

3 жыл бұрын

Thank you for naming the film! Was trying to figure out which it was.

Anyone else find the sped-up scrubbing really satisfying?

When doing your retro Brighting I'm wondering if a small aquarium heater inside the vat would help to raise the temperature of the water and help the the process along a little quicker

@ImpetuouslyInsane

4 жыл бұрын

They do make tea maker rods that go into coffee cups to heat water. That with a pond pump might actually do it

@Coolshows101

4 жыл бұрын

He has a sous vide he used once.

@ImpetuouslyInsane

4 жыл бұрын

@@Coolshows101 I thought it would be better to find a cheaper way of doing it because the peroxide could destroy that thing. Heat and oxidizers do strange things to medals after all.

@wyattroncin941

4 жыл бұрын

@@ImpetuouslyInsane immersion heaters are stainless, so unless you're running voltage through the water it'll be fine. I'd be more worried about the plastic.

@victorpelini5995

4 жыл бұрын

Yes, he sure should build a retro bright rig

Hi, I used to clean a lot of old telephones in a previous job. I found the best thing to remove adhesive is called oil flow. It is available at floor laying supply shops. I think you should try it :-) it works wonders for old labels and things like that.

@peterpanther8627

4 жыл бұрын

Upvoted

@RealSquareMEal

4 жыл бұрын

That stuff works well but the odor is super strong. He'll need good ventilation or a mask.

@serhio4275

4 жыл бұрын

i have no idea what about you talking, but seems you know it pretty well, so like.

@Jezee213

4 жыл бұрын

SquareMEal huts huhu

@MintdowsOnYT

4 жыл бұрын

I don't sell phones but i collect them! I post vids of them on my channel! Sorry for the ad!

Had one of those Excelerator Plus drives for most of the time I had a 64 as a kid. Much less likely to go out of alignment than a genuine 1541, and easier to realign when it eventually did. Solid, if legally dubious, product!

You are like the Bob Ross of computer repairs. It's therapeutic.

I was honestly surprised that you did not attempt to use the Souz-Vide immersion cooker you got in a donation for this, seeing how it is winter. You could even combine that method with the black fluorescent bulb.

@mediaphile

4 жыл бұрын

This is exactly what I came to the comments to suggest. They also sell long fluorescent tube UV lights at Walmart that would give more even coverage. Seems worth trying.

The 8-Bit Guy is truly one of the most professional productions on KZread! He has the wonderful talent of making even the most technical subjects highly entertaining and informative. The 8-Bit Guy is very popular in the UK and Poland!

@marinacelada3246

4 жыл бұрын

And in the rest of the World, I'm sure he is, too.

@exilsaarlander9813

4 жыл бұрын

I think here in Germany he is too, at least I know a ton of people who know amd watch him, too. Also watching his videos boosted my english grades quite a lot

@marinacelada3246

4 жыл бұрын

@@exilsaarlander9813 That's the same for mine (I'm Italian).

Those small CLEAR bins nest in each other. You can line a "dry" bin with the aluminum tape to create a reflective container, then put a second bin, a "wet" bin, inside that to keep the cleaning liquids separate from the tape, allowing it to work on the various computer bits. Might want to use two of the bulbs in that case, as there is a level of opacity to the clear plastic that needs to be overcome. Otherwise, maybe visit some cooking supply stores to see if you can find some large, clear glass pots, bowls, or basins you can use, just wrapping the outside with aluminum foil (shiny side in!) for the reflectivity and less opacity from the glass.

The Blazing Saddles "We don't need no badges" is a better badges.

@pacman10182

4 жыл бұрын

god that movie was great

@robb233

4 жыл бұрын

I prefer UHF: "Badgers? We don't need no stinkin badgers."

@Lexilove2016

3 жыл бұрын

@@robb233 THANK YOU!

"It looks like it was pulled out of a landfill - Let's try some windex on it!"

@psygn0sis

4 жыл бұрын

Is that comment for the deaf? You do realize that we ALL just watched the same video as you did, right?

@namenamename390

4 жыл бұрын

@@psygn0sis I was trying to emphasize that this statement is kind of funny, not just merely quote it.

@tegrqbruh4158

4 жыл бұрын

@@psygn0sis woosh

@InvisibleMan2

4 жыл бұрын

@@psygn0sis why are you attacking him? Is it the first time you're on the internet? People quote some things in comments when they like to share their favorite quotes from a video, because they liked them. That's very common. What is not very common are aggressive comments like yours.

@vincereterram8150

4 жыл бұрын

@@InvisibleMan2 Too be fair aggressive comments are just as common if not more so, albeit not by someone as truly triggered and crotchety as psygn0sis seems too be. It's quit funny though, very "Ok boomer" esque

The printer thing is something I would like to watch even if it was a hour or 2 long

Printing labels with SVG instead of PNG prevails algorithms of numbers, making up for pixelated prints with "fine" resolution: Hence when printing with SVG, your labels and anything else you have in mind--looks professional as the real deal. :) Love the video and thrilled seeing people doing stuff I dreamed of too! :D

7:11 I do love that vacuum extension going to the floor, making sweeping up a breeze.

Man, seeing that excelerator plus makes me so nostalgic for my C64 setup I had as a kid. I had a paper route, and earned my own money to buy a refurbished C64 and 1541, and then at some point later bought the excelerator for a 2nd drive. I don't remember it having any compatibility issues and was so much smaller than the 1541, and its multicolor LED was pretty cool too.

I'd love to see a video about the history of printers. From the old spool typewriter style all the way to modern 3D printers.

@jackkraken3888

4 жыл бұрын

Yes that would be awesome. In fact people still use dot matrix printers to this day since they are very reliable and can print on multipart paper.

@bobblum5973

4 жыл бұрын

That might be a long video. I'm trying to remember all the different types I've used or worked on. Thermal, electrostatic, wax transfer... trying to recall the printers used with Tektronix storage tube terminals, some sort of video capture. Impact printers using 9- and 24-pin printheads, multi-hammer band printers, daisy-wheels. Actual Centronics printers. And we could include plotters, too!

@jackkraken3888

4 жыл бұрын

@@bobblum5973 make it a multi part video! This is the history of tech! We should learn to preserve it.

@Christopher-N

4 жыл бұрын

*Jeff Finch:* While not as up to date as you're describing, there is series 3 of _The Secret Life of Machines,_ with *Tim Hunkin.* No episode specifically about printers, but they do cover related technologies such as the fax machine and the photocopier.

@jackkraken3888

4 жыл бұрын

@@Christopher-N I actually emailed Tim a few years ago. Great guy. And the secret Life of machines is an amazing TV show

To your UV comment near the end of the video. I live in Canada, so retrobrighting is never an option in the winter, so what I use is a metal halide bulb suspended over my bathtub. I cover the pieces I want to retrobright in peroxide creme and wrap them in saran wrap before placing them on a baking tray in the bathtub. This type of bulb requires a ballast and I had an external one made with a switch, that way I can place it outside of the bathroom and turn it on and off with the bathroom door closed so I'm not exposed to the UV light. I'll check the status every several hours (with the light off) and rotate the pieces and make sure the peroxide is evenly distributed. This method has worked very well for me!

"So that's it for the moment" Ok techmoan

Next episode, David's going to have a tanning bed for his indoor retro-briting. Ha ha

@Robert-Wilson

4 жыл бұрын

Aaron Kaase that the UV bulbs he needs.

"That's it for the moment" Paging Technoan.

@StuartVallantine

4 жыл бұрын

@@dgpsf Cue the strains of 'Cuba Baion' (originally from a Teifon cartridge) and his Muppets acting daft at the end ("Flippin' 'eck...").

@Christopher-N

4 жыл бұрын

Anytime I think of retro computer stuff, the first words I hear in my mind are _"Greetings, and welcome to an _*_LGR_*_ thing,"_ in Clint's voice. I even woke to a _Thrifts_ dream this morning.

@pickeljarsforhillary102

4 жыл бұрын

We need an 8-bit puppet.

@grfeld84

4 жыл бұрын

I was thinking the same thing! Techmoan much? I know I do!

@cbspydoge

4 жыл бұрын

“Technoan” If he edits the comment, this is what it said before

I have been using various types of a4 sized paper for my printer that works as stickers. I have both clear and white backed "paper" which works great for this exact thing. It's propably something you should look in to using to get rid of the overlapping lines as is on your PC jr badge and you can print as high of a ppt as your printer supports so they should also fix any resolution "issues" that you might be having on some of the badges to. Just something to think about if you plan on making a lot of these badges.

Great video and adding the classic "We don't need no stinking badges." THAT WAS GENIUS!!! Oh and next time you need to do some wider scraping ask your brother if he has any wood chisels that would work, they can be sharpened to razor blade sharp. It might be worth investing in some.

I remember the Excelerator Plus as the Oceanic OC-118N. Neat little drive.

Have you thought about a little fish tank heater to keep the water nice and warm during retro-brighting?

@AM-os4ty

4 жыл бұрын

Yep. I mentioned that too. They come bigger for agricultural uses, too.

@fuelvolts

4 жыл бұрын

If the air temperature is low, that means the ground water is cold. It could take hours or even days to heat that much water up with a fish tank heater. Probably better to use sous vide heater.

@joshm264

4 жыл бұрын

Someone donated a sois vide cooker for this, and yet he doesn't use it

@Ltulrich

4 жыл бұрын

Wise or not, they make bathtub water heaters that hang on the side of the tub that keep your bath warm.

@jacobharvey2946

4 жыл бұрын

I’d be curious if a fish tank in general would work better... perhaps with something reflective on the OUTSIDE. Perhaps the seal would break down with the chemicals? Just an idea, never seen anyone try it.

In my retro-bright experiences, I have used a large aluminum baking tray to reflect the blacklight. It is a cheap tub like tray used for cooking turkey in the oven. Usually a 2-pack is a couple of dollars. I also used 2 4-foot blacklight bulbs in a cheap shop light fixture. I have retro-brighted old consoles (SNES) as well as GI Joe and Star Wars toys in this manner with great success. Left in solution for 24 hours. I have found temperature has less to do with the process than a good UV source.

You have an awesome job: restore and work with retro tech from my times, draw logos, live the results... Bliss.

This makes so much since he’s your brother, you guys are into the same thing

@alerey4363

4 жыл бұрын

brother looks better equipped with variety of power tools, constuction bench and even computer+photo printer for stickers

@jovetj

4 жыл бұрын

NERDS!!!!

The excelerator plus label is actually dark red. With your colour blindness you might not be able to tell the difference but it's very clear to us.

@MataNui1231

4 жыл бұрын

OK boomer

@Kumimono

4 жыл бұрын

I'm thinking the label maker is B&W only, anyway.

@peterg.8245

4 жыл бұрын

Meh good enough

@patemathic

4 жыл бұрын

Well yeah, good enough for the average Joe but a collector would certainly notice it within the first 5 seconds of looking at it.

@patemathic

4 жыл бұрын

@@MataNui1231 no u

I'll never stop being interested in these restoration videos. I admire your dedication to preserving these old pieces of technology.

Hey, I tried your baking soda trick the other day to clean the thrift store wax pencil/crayon price marking off a set of Creative Labs speakers I bought. I had been worried that it might affect the texture of the plastic somewhat when I had seen you do it in the past, but in this case it removed the markings with no perceptible change to the plastic itself. So, thumbs up for that cleaning tip, it works a treat!

2:00 It's fascinating to see the discrete decoupling capacitor for each chip on the board.

The high-speed cleaning montage at 3:45 reminds me of the episode of Family Guy where Peter Griffin discovers Red Bull.

@Killamarshian

4 жыл бұрын

Reminded me of the Bionic Woman cleaning her flat in the 70's. :)

@mrmimeisfunny

4 жыл бұрын

I think he got editing tricks from Perifractic.

@damian9303

4 жыл бұрын

And I feel, like I just got homeeee And I feel

@blackgenesisishere

4 жыл бұрын

lol, i love that episode :)

Here are a few ideas with building your indoor cleaning tub: 1) Try using glass container for your tub, such as a 1-piece aquarium without the silicone seams or a large glass Pyrex casserole/lasagna pan, 2) Instead of putting the reflective tape inside of the tub, attach the reflective side of the aluminum foil around the outside of the glass tub so it won't react with the chemical mixture, 3) go to an aquarium store to find a temperatue adjustable and submersible water heater that's built within a test tube. Hope this helps and gives you ideas with your design and construction.

I'm sure half of these comments are going to be suggesting retrobright techniques. But I've done a lot of experimenting myself (peroxide hair cream, industrial peroxide solution, high power LED UV strip light, sunlight, ambient light, various temperatures etc) Without going through every iteration, I basically found out that blasting it with UV light doesn't make much of a difference from ambient sunlight. However, heating the solution makes a massive difference. I now have a clear plastic tub similar to yours with lid and a sous vide heater. I put the parts in undiluted 12% food grade H2O2 @ 60-70 deg C and leave them on a window sill during the day. It takes 1-3hrs this way. You can dilute the mixture 50% and it takes twice as long. A really interesting thing to note is I did this at first and thought the parts still looked a little yellow, I dried them off and left them on the side overnight and in the morning they were perfectly white. I have no idea how this could happen though :S I'd definitely recommend heating the solution over any other kind of method and a sous vide cooker is the perfect way to do this accurately.

There's something oddly satisfying about the sped-up scrubbing.

16:50 From that photo, I can see that the fonts used were from the Eurostile family, which is used with most products both then and now. I recommend getting the fonts for any future projects.

@jovetj

4 жыл бұрын

Some of them are slightly modified. Easy to do in Photoshop, too. (Convert the text layer to a shape and adjust the vectors at will.)

i watched a guy who restores gaming consoles. he made a giant box with tin foiled walls, floor and ceiling. Then he would place the clear container in the box with the peroxide solution and then used black light LED's on strips, kinda like how Christmas lights are on strands so that they could be placed all over the box and therefore the UV light would get in every crack and corner of the box. you could even re-adjust the LED strips as needed if needed. and his plastics would come out beautiful and brand new looking, and some of these things were truly ugly going in. maybe you could do something similar to this. i hope you read this and it gives you some ideas. love your channel. keep up the good work.

Back in the day I loved making custom badges as the final touch for a mod project. I think my first was the old "Evil Inside" intel logo fascimile. I was lucky enough to have a father with a laserjet and would print on clear overhead transparencies.

"We don't need no stinking badgers!" Lol didn't know UHF parodied another scene!

@Fulano5321

4 жыл бұрын

Same here, I thought that was just totally random yelling about badgers!

@CarterGregg25

4 жыл бұрын

Wow I just learned this too

@gorebrush

4 жыл бұрын

I too learned more than I thought, today.

@Spinalfields

4 жыл бұрын

@ Ye, judging from your comment I bet you saw The Treasure of the Sierra Madre premier day or something in 1948.

@Spinalfields

4 жыл бұрын

@ When in your life did you realize the asshole life didn't chose you, but you decided voluntarily to be an asshole?

"So small that nobody's really going to notice." I did, even before you told us. Since you have the label on that drive still basically intact, why not scan it and then edit it to clean it up, and then use a regular printer with transparency sheets, with the right color of printing, instead of on the label maker, for best results?

@ValkyrieTiara

4 жыл бұрын

Ugh, I'm glad I'm not the only one who thought they looked like crap. A piss-poor quality label maker is mostly to blame (I don't know how the HELL you end up with those artifacts on a flat horizontal/vertical line of pixels...) but if he's gonna be drawing letters by hand anyway instead of trying to track down a font, then he really should just do them in vector.

@HelloKittyFanMan.

4 жыл бұрын

Oh yeah, vector! Good point, @@ValkyrieTiara. Or in this case it might even be easier to just scan the existing drive label at a good 600+ DPI and then clean it up in raster drawing software (like he was using). I can see using vector for scratch, but if I have something to scan that I can just clean up, I'd rather go that route. Thanks for your reply and like!

@jovetj

4 жыл бұрын

You can also set the resolution in Photoshop to something more than 72. If it's a 300 DPI printer, set it to 300!

@kyleolson8977

4 жыл бұрын

I can't believe he used a microscope to prove that the results on his low res printer were the same no matter how good the source was. The point is so totally missed. "Hey, maybe you should use 1080p instead of 720p for your video? It might look better?" "When I play it back on my CRT using composite video it looks just as bad either way. Zoom in real close and you can see it." Either way, the original source regular or doubled wasn't close to a high enough resolution for good results on a good printer with clear sticker paper or other transparent sheets.

@jovetj

4 жыл бұрын

*@Kyle Olson* Exactly. It's like expecting photo real results on a Lite-Brite.

Hi, I watch a bunch of reconditioning videos on KZread including lots of yours (Thank you!). Your channel is where I learned about retro-briting (is that a real verb?). Every time I see anyone trying to remove labels and marks from various pieces of equipment, I always wince at their efforts with Isopropyl Alcohol and/or WD40. Although WD40 works a lot of the time, there are better substances out there that require much less labour. One is Non-Chlorinated Brake Parts Cleaner (Automotive store), and the other is Methyl Hydrate (any Paint store/department). The brake parts cleaner is better than any of the purposed label removers like Goo Gone etc. It will soften just about any label glue and, unlike the other stuff, it will not touch the plastic. The only down side is that it has a pretty intense odour. You can even use it on some oil or solvent based stains on clothing. It works kind of like dry cleaning fluid. Methyl Hydrate is much better than Isopropyl Alcohol at removing marks and has no odour. It instantly removes Sharpie marks without hurting plastics as well. It can be had for about $5/litre at any paint store. I used to be a signage installer, and we used these chemicals all the time to remove vinyl lettering and removing tape goo and labels after installing or removing signs. Cheers!

Man, just discovered your channel, you've made my day thinking back to what I used to do in the 80s ...

Look up the recipe for “secret sauce” that us sneaker heads use to remove the oxidation on the clear soles of older air Jordan shoes. The process is much quicker than using so much liquid and the results will surprise you

@prismstudios001

4 жыл бұрын

B2D 327 That’s the stuff on a Big Mac?,

@RailRide

4 жыл бұрын

@@prismstudios001 Most likely referring to some folks selling pre-mixed hydrogen peroxide (the most effective strength is hard to come by since it's only sold to licensed beauticians) with a thickening agent so it sticks to surfaces long enough to do its job.

@prismstudios001

4 жыл бұрын

RailRide I’m sure. You can get concentrated H2O2 from taxidermy supply houses. It’s used to bleach bones.

@b2d327

4 жыл бұрын

RailRide that is correct. It’s a mixture of the peroxide solution with corn starch as a thickening agent. It’s then brushed on and covered with regular store bought shrink wrap to keep from drying out and left out in the sun or under up light until desired results

@GeorgeVCohea-dw7ou

4 жыл бұрын

@@prismstudios001 Big Macs don't actually have "secret" sauce. That stuff is special sauce.

That feeling when it's almost Xmas but you live in Texas so it's still summer all year round xD I'm envious lol

@H3boy

4 жыл бұрын

50 Degrees F = 10 Degrees Celsius not exactly summer weather

@sikkepossu

4 жыл бұрын

@@H3boy Yeah, well but compared to this crappy weather here in Finland it is SUMMER! :P

@give_me_my_nick_back

4 жыл бұрын

@@H3boy still better than -10 :D

@lightmagick

4 жыл бұрын

I'm in Texas too and I'd be happy to switch my weather for yours any time. I hate this Texas heat even though I've lived in it for all my life.

@H3boy

4 жыл бұрын

sikkepossu Fair enough, stay warm!

Hello, 1. I saw a guy removing old badges heating them, using a hairdryer or a similar professional tool; 2.. Acetone can dissolve and clean superglue BUT damage /change the plastic color and surface. I think metallic surfaces (ink free)are not modificated by acetone; 3. After print the new logos/badges you can protect them with a special spry to protect paintings. It's not the same original protection but can help. Attention, apply this spry before apply the badges on the device. Thanks for the great video, from Seoul, Tito.

Brilliant idea! The only thing you forget is a heater to maintain the water with peroxide warm. BTW the idea is brillant.

*sees the wrenches places as weights* "Well, talk about throwing a wrench at the problem!" =P Honestly, it's a good idea!

This channel makes me so happy. I do a chair dance when I hear your synth-y intro. 🎶🎵🎶

Voultar has a good setup for retrobrighting. He has an opaque bobby bin lined with foil or reflective tape, and then UV led strips. Since you retrobright so much, it's probs worth investing in building a rig like that. Great vid!

The only channel on KZread where Music Dosen t suck Ort annoy.

3:48 ooook that was super satisfying

Great stuff! Note: Some of these plastics re-yellow when the plastic is in a light free environment! I've found that on a mouse I did a few months ago.

@sircompo

4 жыл бұрын

Yeah. My Sam Coupé was pristine when I put it in its box 20 years ago. Was shocked at how it had yellowed when I took it out a couple of months back. Even more noticeable on the Sam as MGT used white plastic.

@derekwhidden9730

4 жыл бұрын

Spot on. In fact in many cases the yellowing will occur faster, and will cause some plastics to yellow where they had not before. I have watched videos that actually ask, "to retrobrite, or not to retrobrite, that is the question." And they named these problems among others as arguments for not retrobriting. I think though, that one of the most convincing arguments against it, is collectors shunbthe process and feel it devalues the things they are trying to collect. In David's case, he is trying to present content in a historical format and it is interesting to see this old tech in its original condition.

@Chaos89P

4 жыл бұрын

I think yellowing is also heat-related on top of being light-induced.

@lukasperuzovic1429

4 жыл бұрын

@@Chaos89P I think it depends on the individual plastics and the mixture/chemistry involved.

@GadgetUK164

4 жыл бұрын

@@Chaos89P In this case - cold related! It has been in the coldest darkest area of the house in a box! Yellowed again after maybe 6 months!

Thank you for the video content and all the unforeseen segments. I enjoyed it very well, so from my point of view, maybe you did a better job than you might have anticipated yourself. I also found it nice to get a glimpse of your brother and some of his work, thank you for mentioning his channel.

I used to print out sheets of foil stickers during my university years (nothing nefarious like annual proof-of-subscription stickers for my student discount card, promise!). My tip for foil stickers: tape a slightly smaller sheet of kitchen aluminium foil on a regular sheet of a4 printer paper so you can run it through an ink jet printer. Print using high resolution settings (B/W & color work equally well), after printing spray on some cheap automotive clear coat to seal the ink on the aluminium (thin coats to keep clarity) and they're ready to use (contact- / spray adhesive works well). I did try laminating the sheet before cutting the stickers out, but that didn't seem to have any added benefit and the laminated plastic just peeled of sooner than the clear coat got scuffed up. The stickers survived daily carry in my wallet for at least a year at a time for me, so on a drive like these they'd look good indefinitely. BR. RK from Finland

MAAAAAAAAA! The neighbor is washing his computers in the front yard again!

@agomezjunco

4 жыл бұрын

TheVictorotciV LOL!

5:50 the irony of only getting a smooth finish when you stop using the razor...

I love the dedication of how you went and did a number of these logos simply by just replicating them in a paint program by hand. Instead of the speedier option of using Photoshop and looking for a similar font style and editing it to look like the logos. Kid me would've certainly done the same if I had never discovered or used Photoshop. od

Another excellent video Dave. I wondered if the metal tape would have been better on the outside of the container. Great stuff.

This is a restoration video in disguise

1:46 the drive‘s logo looks like the Blender logo…

@PixelBrushArt

4 жыл бұрын

Huh. Neat.

@jk9554

4 жыл бұрын

nice catch!

@Dovaah

4 жыл бұрын

I thought so too! Thought I was losing my mind

Every time I hear your intro music, I know I'm gonna have a good time and learn some things as well. Quality from start to finish.

Perfect summer morning outside and a new 8-Bit Guy video. What a wonderful day it is!

now you know, have the reflective surface OUTSIDE the reaction chamber... in which case normal foil would also work, probably, but could also just tape that aluminium tape to some cardboard or something...

@absalomdraconis

4 жыл бұрын

Maybe even silver spray paint on the inside of a box.

2:08 Likely from a Commodore product, lolz Looks like it came out decently enough. Yes, do assert caution with UVB/C lighting, and with procurement of it because it's one of those things that people love overcharging for...

I never tried it myself but I would attempt a used fish tank (20 gallon) coated with mirror paint (many many coats. Finished with black paint. You could leave a hole on the bottom for (or other sides) for additional lights. You’re the expert I’m just spit balling. Love the channel and love your work. I hope it helps.

I have that same Blue Chip 5-1/4" diskette drive for my C128...still works great. I also just picked up a couple of other Commodore machines....a C64 and a VIC-20, $19 each at a local electronics reseller. Most of the machines they had were pretty well destroyed, missing parts, etc. I didn't pickup any disk drives they were way too far gone, didn't have to do much cleaning to either of the machines just some all purpose cleaner and they cleaned up pretty well both of them powered on and seemed to be fully functional units, my C64 apparently has a PET keyboard in it from what information I received from a Commodore Facebook group.

"I think its important to show the failures" I still remember that video with the sparks! :P

@toku7319

4 жыл бұрын

What video?

19:19. But that's it for the moment. Sound familiar? Well, read it in Techmoan's voice.

ive been a gamersince i was a kid, never in to old computers except for the few i got to play with in the 90s (half life, blue shift, opossing forces (illegal copies)) but i LOVE your videos. You and Clint both, glad you get to do what you love to make a living, keep it up, we appreciate you.

I had one of those Oceanic drives... I got it very cheap as the previous owner had issues with it. I had a great run with it though... Way back then it was terrific to not have the HUGE shoe-box sized 1541 on your computer table/desk!

Imagine David walking into Spencer’s wearing a Rick and Morty t-shirt.

@Cole-ek7fh

4 жыл бұрын

gross. spencer's sucks.

@RiderLeangle2

4 жыл бұрын

Wouldn't be that surprising if he got the shirt there in the first place.

I would've used sandpaper for the recessed badge place

Mr. 8 Bit Guy it is good to bring more humor in your videos (I mean the video cuts from that movie) You are doing very well and I always wait for the new content and in the mean time I watch the previous ones, so thank you very much for thesethings you do here sir.

Double thumbs up for using the clip of Sierra Madre! Love that film, got the Bluray.

We don't need no badges! :D

@friendlyjapanesebusinesswoman

4 жыл бұрын

?

I went here as soon as I saw the notification :P

You should just wrap the outside of the tub with aluminium foil to prevent any chemical reaction. You can just stick it to the tub with double sided tape or even just tape it on. Or use two tubs (the ones that store inside each other) and put the foil between the two of them... Great video as always, thanks

>50 F outside >full winter coat Texan confirmed.

you realize the label on the excelerator plus is red and yellow?

@marinacelada3246

4 жыл бұрын

He is colour-blind.

@DrewLemmy

4 жыл бұрын

he's colourblind

@Nolroa

4 жыл бұрын

@@marinacelada3246 But he made the one of "Enhancer 2000" with the right colors. The label maker he used to make the Excelerator Plus logo only prints in black.

@chloedevereaux1801

4 жыл бұрын

it's actually 5 colours.... if you look with your eyes open

@marinacelada3246

4 жыл бұрын

@@Nolroa I don't know. You could try e-mailing him about it. I know he can see only SOME colours, perhaps that's due to that.

Wouldn't sanding be way more gentle and still effective? Going down in grit size and you might not see anything. :)

As someone who lives where it's cold 8 months out of the year, I'm really excited to see what you come up with for an indoor setup. I've experimented with a few things, but I'm always kinda nervous investing time and money into things that might not work, or worse, damage what I'm trying to clean up. Rock on sir!

Dude, the fast motion cleaning shots... Thats Awesome!!!