HOW TO MAKE 'PERFECT SHOTS' COFFEE WITH ESPRESSO CREMA USING MOKA POTS

Тәжірибелік нұсқаулар және стиль

Let's face it. The ultimate moka pot brewing technique should give you a smooth tasting brew with that beautiful regulated crema flowing out of your moka pot into the cup! Just like what you would expect out of espresso from an espresso machine. Except this time at a fraction of the cost of an espresso machine.
With a few tweaks in the brewing technique and adding this crema valve, you might just get those perfect 'shots' using your affordable moka pots. I also found that using the valve eliminates the need for paper filter.
This handmade crema valve was invented by a gentleman from the South of Thailand. If you would like to give it a try, links to order are below:
This crema valve is only available in Thailand #daypressomachioni
Free Worldwide Shipping: bit.ly/3wf5bmH
Shopee Thailand bit.ly/3tV2Vhx
Shopee Philippines bit.ly/3CE6RHy
Send us your results too!
MOKA POT CREMA VALVE
For use with Moka Pots 1-6 cups. Best used with 3-cup moka pots
Directions for use:
• Insert the valve in the stem of the coffee collector (pot)
• Put firmly in place
• Place the filter plate then the rubber gasket
• Brew as normal
• To take out, tap out or push out through the funnel using a soft toothpick or wire.
Recommended Brewing Proportions
Fill the coffee basket with medium to fine grind coffee depending on the roast.
Fill the boiler with water up to just below the pressure valve.
For gas burners: brew on medium heat and reduce the heat when the coffee starts to flow out.
For electric hot plates: brew on high heat, reduce the heat after 1 minute or so, then turn off the heat as soon as the coffee starts to flow out.
Cleaning Directions: Rinse with water and keep dry.
Materials: Stainless Steel, Rubber Rings
HANDMADE IN THAILAND
LINKS:
James Hoffman's Ultimate Moka Pot Technique
• The Ultimate Moka Pot ...
👉Follow me:
KZread bit.ly/3tZ8qdnchaoyoutube
Facebook / riza.sripetchvandee
Instagram: / riza.sri
Don’t forget to check out my books. The first books you should read if you are planning to start a coffee or tea business or if you are already in the business and want to know more.
The books were written for home and business - with tips, recipes and techniques that are simple, cost-effective and ingredients that are easy to find.
📚THE BASIC BARISTA - for all things coffee, smoothies, frappe and milkshakes
📚ALL THINGS MILK TEA - for all things tea and milk tea
To order the books:
eBooks on AMAZON.COM
All Things Milk Tea amzn.to/3Ehl9gm
The Basic Barista amzn.to/3FsH2ug
👉WITHIN THAILAND:
Shopee TH: The Basic Barista bit.ly/3vGoth2
Shopee TH: All Things Milk Tea bit.ly/3ek0qhX
👉WITHIN PHILIPPINES:
Lazada PH The Basic Barista bit.ly/3qPDVbq
Lazada PH All Things Milk Tea bit.ly/3Dx5Tw2
Shopee PH The Basic Barista bit.ly/3vqZQEZ
Shopee PH All Things Milk Tea bit.ly/3aHRhgX
Hardcover Books
👉OUTSIDE THAILAND AND PHILIPPINES:
The Basic Barista bit.ly/3eA3d5P
All Things Milk Tea bit.ly/3t2ZhzA
Thank you everyone! For your love and support!
📚For milk tea and coffee shop supplies available at Chao, please visit
👉Chao Website bit.ly/2YCjSzr
👉Lazada Philippines bit.ly/34jTVr9
👉Shopee Philippines bit.ly/3lZ6bUc
📚Website: chao.ph bit.ly/2Zd6dzu
📚Facebook: chaocafeph bit.ly/chaocafeph
📚Instagram: chaocafe bit.ly/33M2xTy
👉Don’t miss the opportunity of joining our comprehensive online training programmes.
bit.ly/2zNRQ9z
👉START YOUR COFFEE OR TEA BUSINESS RIGHT OR UPGRADE/FIX YOUR EXISTING SHOPS. GET A MENTOR! Professional Online Consultations
chao.ph/collections/courses/p...
Lots of love from Chao!
👉🥤😄🍮🍭🙌🎂💞🥗🎄📍🏫 📅
#chaoph #chaocoffeeandtea #cremavalve #madeintthailand #diycrema #mokapot #bialetti #mokaexpress #cremaonmokapot #crema #rainbowmoka #nobrandmokapot #genericmokapot #review #bychao #mokapotcrema #howtogetcremaonmokapot #howtobrewusingmokapot #3-cupmokapot #mokaexpress #bialetti #nobrikkanoproblem #brikka #jameshoffman #ultimatemokapottechnique #trending

Пікірлер: 116

  • @fernandoherranz4095
    @fernandoherranz409511 ай бұрын

    I use the paper filters which do a good job of giving some crema. Don’t forget this is not espresso! The crema is short lived, but i can say that the paper filter does help the coffee texture. Maybe this valve helps too? I think the technique in this video is very good in getting a better tasting cafe. I usually let my moka get too hot on the flame which makes the coffee more bitter. This makes a bigger difference in how good the coffee turns out if you pull it off the flame earlier. Thanks for sharing!

  • @finediva
    @finediva2 жыл бұрын

    I always wondered if there was such an attachment and saw this video and just bought mine. Thank you!

  • @alfredprochaska8601
    @alfredprochaska8601 Жыл бұрын

    Hi, thank you for this brilliant review. What is the best way to clean the crema valve?

  • @davidherreranieto5492
    @davidherreranieto54926 ай бұрын

    Good content fair review

  • @rizasri

    @rizasri

    6 ай бұрын

    Thank you kindly!

  • @allanparkinson8050
    @allanparkinson8050 Жыл бұрын

    Hi, mine arrived today do I install using all 3 O rings or just one? 3 cup Bialetti

  • @danielshin1984
    @danielshin1984 Жыл бұрын

    I ordered that valve today! Luckily I live in Thailand.

  • @user-ir7gu8en4v

    @user-ir7gu8en4v

    2 ай бұрын

    Where can I get the cremavalve in the US?

  • @suzannehicks5856
    @suzannehicks585610 ай бұрын

    So how do you get one of those valves please?

  • @user-ir7gu8en4v
    @user-ir7gu8en4v5 ай бұрын

    Would you please tell me where to get the crema valve for the moka pot!

  • @Keithphotorama
    @Keithphotorama4 ай бұрын

    I have the IMUSA 6-cup Moka pot and using medium roast Turkish coffee fine grind that gives me some crema. I don’t need to add the extra valve that probably wouldn’t fit my Moka pot anyway.

  • @bethzaidavasquez6794
    @bethzaidavasquez67942 жыл бұрын

    I just placed my order. I also ordered the mini hot plate but forgot to check if I can use it in the USA 🇺🇸

  • @rizasri

    @rizasri

    2 жыл бұрын

    Hello, we have sent you an email. The hot plate is 220V so it might not work in the USA.

  • @merakicustomade
    @merakicustomade Жыл бұрын

    That is such an amazing invention! So is it not available for purchase anymore ? The link says that this website is not available. I just wanted to touch base with you and make sure. I am interested in buying this. Thank you for your amazing news and never stop creating such wonderful content. You just got a new subscriber!

  • @rizasri

    @rizasri

    Жыл бұрын

    Hello, we are currently out of stock. Thanks for subscribing!

  • @alexyatel6581
    @alexyatel65813 ай бұрын

    does this valve work for the Bialetti Musa 4 cup model (steel, not aluminum) ? thanks! and I cannot find to order on your www-shop

  • @user-qm3be8ie1m
    @user-qm3be8ie1m4 ай бұрын

    Where can we find the tool? Give me the purchase link. I am from Africa

  • @bm-br3go
    @bm-br3go Жыл бұрын

    Interesting concept that I haven't seen before. The results look great, but I'm a little worried about the added pressure making the whole unit too hot. In your experience, has this been an issue?

  • @rizasri

    @rizasri

    Жыл бұрын

    Not at all. My experience is that one should use less water in the boiler so as not to overly increase the pressure.

  • @ejaldoseri-iw4xs
    @ejaldoseri-iw4xs Жыл бұрын

    From where i can buy that valve mam , please

  • @allhandsgointowork
    @allhandsgointowork7 ай бұрын

    Where can I get a creams valve

  • @user-ir7gu8en4v
    @user-ir7gu8en4v2 ай бұрын

    Would you please tell me where to buy the cremavalve for a moka pot!!!!

  • @xenod1066
    @xenod106611 күн бұрын

    What does it do? How does it work? Like what's the principle of operation? Anybody know? Thanks.

  • @docspot1961
    @docspot19616 ай бұрын

    I would like to buy this crema valve for bialetti moka induction 2 cups …where is it possible ? Thanks

  • @keppela1
    @keppela15 ай бұрын

    Great video. Do you know what the valve is made out of (e.g. aluminum, brass, stainless steel) and if there are any plastics inside the valve? Thank you!

  • @rizasri

    @rizasri

    5 ай бұрын

    Pure stainless steel. Nothing else

  • @MrAmbro001
    @MrAmbro001Ай бұрын

    where can i buy from please

  • @chriskimx
    @chriskimx24 күн бұрын

    Anyone in US how can we order this filter?

  • @Thadnill
    @Thadnill Жыл бұрын

    Hi, does this valve work for the Bialetti venus 4 cup models? thanks!

  • @rizasri

    @rizasri

    Жыл бұрын

    Hello, no it does not. Works on Moka Express and Brikka. Honestly, you can simply use coffee filters and it should work equally well. :-)

  • @sinan6713
    @sinan6713 Жыл бұрын

    How much pressure does the crema valve make the system create?

  • @sO_RoNerY

    @sO_RoNerY

    Жыл бұрын

    1.5 probably. Maybe 1.3

  • @anthonyscarmato8458
    @anthonyscarmato84582 жыл бұрын

    Will this work with a stainless steel Bialetti espresso maker?

  • @timothysetiadi5521

    @timothysetiadi5521

    2 жыл бұрын

    I was thinking the same thing too.

  • @FengFaith

    @FengFaith

    Жыл бұрын

    Third to this same question. 😂

  • @jdicarlo4060

    @jdicarlo4060

    Жыл бұрын

    Anyone find out an answer?

  • @francochan
    @francochan Жыл бұрын

    Awesome invention. Question: how do you remove it to help clear the moka pot? Or is it a permanent mod, and once it has been placed inside, it cannot be taken out?

  • @rizasri

    @rizasri

    Жыл бұрын

    You simply have to tap it out. TBH, using a paper filter would achieve an equally good brew

  • @francochan

    @francochan

    Жыл бұрын

    @@rizasri really? What do you mean by “equally good brew”? you mean, using a paper filter will achieve the crema this valve offers? I don’t think so. I’ve tried adding a paper filter to my 3 cup moka pot and the result is the same. No matter the grind size. But what I want to know is, once you plug the tube/shaft with that Thai-invented gasket/valve, how does one remove it? Those rubber/silicon o-rings look pretty tight, and one would worry that once it’s jammed inside tightly, it will be close to impossible to remove. Does it come with a tool to remove it easily?

  • @kiyoponnn

    @kiyoponnn

    6 ай бұрын

    ​​@@francochanIf you want crema, buy an espresso machine. Trying to force crema out of a moka pot will only result in poor tasting coffee.

  • @francochan

    @francochan

    6 ай бұрын

    @@kiyoponnn first of all, I feel like I ought to wish you a Merry Christmas as of all the days of the year, you’d rather spend it taking some of us here in the comments section to task than spread some positive cheer. Second, maybe shy away from any assumptions about people you may not know. Why do I say this? Because: 1. I do have espresso machine, and I do enjoy true crema, among other things that an espresso machine delivers. And; 2. I also own a moka pot, and have owned one for many years, and respect it’s Italian heritage in coffee making, as well as its design simplicity in being able to deliver good coffee in such a small package. To address your pointed query, some may not have the option to get an espresso machine due to budget or space constraints, in which case, a moka pot (like generations of Italians can attest to) serves as a smaller, portable, more economical and accessible way to obtain someone’s espresso, with only a stovetop burner needed.

  • @francochan

    @francochan

    6 ай бұрын

    @@kiyoponnn Also, precisely, most of the people who have watched and appreciate this video are intrigued by this easy attachment that adds a further extra bit of pressure to any moka pot in the cupboard. I have since purchased one of these, but before I share my own observations, I just want to preface it with this: I am aware that moka pots do not technically create true pressurized crema, they can create a sort of micro-foam residue that closely resembles it in limited amounts and in varying degrees - a “faux crema”, if you will. Now, what this “spout cap” invention does create however, is simply a higher, more frequent occurrence of this “faux crema”, by bringing the standard top spout of any moka pot to an efficiency of a Bialetti Brikka moka pot, which has a similar “spout cap” that increases the pressure just a little bit more to create “faux crema” for those seeking it in their moka pot brews.

  • @timothythegreat6294
    @timothythegreat6294Ай бұрын

    😍

  • @kijijiwang1659
    @kijijiwang1659 Жыл бұрын

    How can I buy the crema valve? I am in Canada. Thanks!

  • @ChuckieT266

    @ChuckieT266

    9 ай бұрын

    I am looking to purchase this cream Valve as well!! In the USA

  • @kevinalkindy
    @kevinalkindyАй бұрын

    how to order the crema valve from Malaysia?

  • @rizasri

    @rizasri

    Ай бұрын

    Hello, it is available on Shopee and Lazada in Thailand

  • @danteaustria962
    @danteaustria9622 жыл бұрын

    Hi. . Where did you set the hotplate when you lower its setting. .

  • @rizasri

    @rizasri

    2 жыл бұрын

    Max is 5, I lower to 4 after 1-1.5min then 0 when it starts to flow out.

  • @ricardogodoy7911
    @ricardogodoy791111 ай бұрын

    Hello, how are you, i live in lima, peru, could you tell me where I could buy that valve because i can't find it?

  • @rizasri

    @rizasri

    11 ай бұрын

    Hello, it is out of stock at the moment.

  • @jpkatz1435
    @jpkatz1435 Жыл бұрын

    "A little bit of trile and error." I really like that. Interesting. Thankyou.

  • @fattony9227

    @fattony9227

    6 ай бұрын

    Trial

  • @user-ir7gu8en4v

    @user-ir7gu8en4v

    2 ай бұрын

    Where can I get the cremavalve?

  • @CelticKym
    @CelticKym2 жыл бұрын

    I just got my valve. I have a bialetti 3 cup. Should the valve be snug? I keeps falling out. Do I need to push the valve in so it’s tight?

  • @rizasri

    @rizasri

    2 жыл бұрын

    Hi, the valve can be pushed in or could also be loose. When I pushed too tight I had to use a soft bendable wire to push out :-) Good luck!

  • @CelticKym

    @CelticKym

    2 жыл бұрын

    @@rizasri I got zero crema. I think this has a learning curve. It still tasted good and I’m not giving up! You got crema so I am certain this is user error on my part.

  • @rizasri

    @rizasri

    2 жыл бұрын

    @@CelticKym Yeah, even with Brikka it takes a bit of trial and error. Never give up!

  • @EdDetlie

    @EdDetlie

    2 жыл бұрын

    I just tried, and didn’t get much crema, but the taste seemed to be improved over the same coffee and water without the valve.

  • @rizasri

    @rizasri

    2 жыл бұрын

    @@EdDetlie Don't give up! It took me a few iterations before I got the hang of it. If you follow my tips you might get the crema fine. Yes, I agree the the taste is cleaner and fuller body.

  • @yigitturgut2296
    @yigitturgut22966 ай бұрын

    James Hoffman technice for moka brewing

  • @cachi-7878

    @cachi-7878

    2 күн бұрын

    What does this mean?

  • @fattony9227
    @fattony92276 ай бұрын

    Does the crema valve work on a New Venus 2 cup? Thanks.

  • @rizasri

    @rizasri

    6 ай бұрын

    No, it does not.

  • @fattony9227

    @fattony9227

    6 ай бұрын

    @@rizasri That's too bad. I have been using paper filters (1 0r 2) and experimented with water temps (from room temp to very hot) and I only use filtered water but NO crema. Perhaps time to use a different coffee other than Lavazza medium grind. Keep up the good work.

  • @lucasyu9224
    @lucasyu92242 жыл бұрын

    where to buy the crema valve?

  • @rizasri

    @rizasri

    Жыл бұрын

    Free Worldwide Shipping: bit.ly/3wf5bmH Shopee Thailand bit.ly/3tV2Vhx Shopee Philippines bit.ly/3CE6RHy

  • @bethzaidavasquez6794
    @bethzaidavasquez67942 жыл бұрын

    Do these fit any moka pot?

  • @rizasri

    @rizasri

    2 жыл бұрын

    Ideally 2-4 cups

  • @weelliesoe652
    @weelliesoe652 Жыл бұрын

    Hi, does the valve suitable for 1 cup moka pot?

  • @rizasri

    @rizasri

    Жыл бұрын

    No, it is not recommended

  • @weelliesoe652

    @weelliesoe652

    Жыл бұрын

    @@rizasri alright, thanks!

  • @auniqistina8957
    @auniqistina89572 жыл бұрын

    where can i buy a crema valve like yours....how much it is in thai baht

  • @rizasri

    @rizasri

    2 жыл бұрын

    If you are in Thailand, you can buy directly from the product owner. It is 550 Thai Baht (US$18) For worldwide shipping it is US$25 including shipping. Free Worldwide Shipping: bit.ly/3wf5bmH Shopee Thailand bit.ly/3tV2Vhx Shopee Philippines bit.ly/3CE6RHy

  • @zulkeflicheani8040

    @zulkeflicheani8040

    2 жыл бұрын

    If in bukit kayu hitam/ sadao thai......where i can buy this crema valve......

  • @ahmadqayyimnafis8881

    @ahmadqayyimnafis8881

    Жыл бұрын

    @@rizasri worldwide shipping link is no longer working.. please fix 😢

  • @cyberslug9755
    @cyberslug9755 Жыл бұрын

    has this been tested with a 6 cup musa?

  • @rizasri

    @rizasri

    Жыл бұрын

    Not that we know of

  • @peterlee9691
    @peterlee9691 Жыл бұрын

    I think the pursuit for a good looking crema is an outdate concept, having crema may look great but it's not an indication of a great coffee.

  • @stellarorbit1341
    @stellarorbit13416 ай бұрын

    Is there a way to order this to the USA?

  • @rizasri

    @rizasri

    6 ай бұрын

    Not at the moment. It is too small and we have had cases of loss in transit :-(

  • @maureenjoycanasa1556
    @maureenjoycanasa15562 жыл бұрын

    Hi po mam idol😍...can i use crema valve using electric moka pot? TIA💕

  • @rizasri

    @rizasri

    2 жыл бұрын

    Hi, the gadget is too small for the 6-cup electric moka pot. The inventor has to design a larger crema valve for these ;-)

  • @katedurr9160
    @katedurr9160 Жыл бұрын

    Where do you buy this in the uk?

  • @rizasri

    @rizasri

    Жыл бұрын

    Hello, this is only available in Thailand as the tool is made in Thailand.

  • @katedurr9160

    @katedurr9160

    Жыл бұрын

    @@rizasri Do you sell it? Or are you able to put me in touch with the person who makes them please?

  • @ahmadqayyimnafis8881

    @ahmadqayyimnafis8881

    Жыл бұрын

    @@rizasri yes please help for outside of Thailand and Philippines..

  • @davefan4589
    @davefan45892 жыл бұрын

    Where do I buy a valve? I can’t find one at all.

  • @rizasri

    @rizasri

    2 жыл бұрын

    Free Worldwide Shipping: bit.ly/3wf5bmH Shopee Thailand bit.ly/3tV2Vhx Shopee Philippines bit.ly/3CE6RHy

  • @EdDetlie

    @EdDetlie

    2 жыл бұрын

    My order shipped to me in the U.S. in about 2-1/2 weeks, with no problems.

  • @rizasri

    @rizasri

    2 жыл бұрын

    @@EdDetlie Good to know!

  • @pegwinn
    @pegwinn6 ай бұрын

    Where do you get this valve?

  • @rizasri

    @rizasri

    6 ай бұрын

    They are available in Thailand

  • @hanhbachkhoa2527
    @hanhbachkhoa2527 Жыл бұрын

    Where can I buy CREMA VALVE FOR MOKA POT ? Thanks

  • @rizasri

    @rizasri

    Жыл бұрын

    Free Worldwide Shipping: bit.ly/3wf5bmH

  • @PackingLess

    @PackingLess

    7 ай бұрын

    @@rizasri That link says "404 Page Not Found The page you requested does not exist." is there a new link to buy it?

  • @hommefield9612
    @hommefield9612 Жыл бұрын

    Was this a 3 cup moka pot? Seems like you emptied out the pot with just 1 cup

  • @rizasri

    @rizasri

    Жыл бұрын

    That's how I typically brew my coffee for home - milk added later! :-) kzread.info/dash/bejne/iX2F0NqRnMjQnpM.html

  • @hommefield9612

    @hommefield9612

    Жыл бұрын

    @@rizasri Let’s say I want to make an 12 oz Americano; do I have to put less water in the chamber if I want it to act like an espresso? How many shots does a 3 cup moka pot yield?

  • @bm-br3go

    @bm-br3go

    Жыл бұрын

    ​@Homme Field In a 3 cup Bialetti, if you fill the base with 130g of water you can usually get 85g - 95g of brewed coffee out with proper temperature regulation. This is around 3oz of coffee. Making a moka americano, I would use between a 1:1 to 1:2 ratio of brewed coffee to hot water. Ultimately the ratio is up to you, but I start losing complexity above 1:2. So at most your americano will be likely be around 9oz. Use the max amount of water and a full basket of coffee each time. Keep in mind that the less water you use, the more steam you need to generate to begin brewing (which usually means a hotter brew temperature). Moka pots are such sensitive brewers that aiming for specific results is pretty tough unless you are unreasonably consistent.

  • @tangshibin6861
    @tangshibin6861 Жыл бұрын

    How many ml of espresso yielded out from that 120ml hot water?🤔

  • @gigcrizchan9486

    @gigcrizchan9486

    Жыл бұрын

    about 90ml.... everytime you brew, you get 1oz. or 30ml less or at least that's what I get.

  • @cachi-7878
    @cachi-78782 күн бұрын

    The generic moka pot didn’t show any crema once you poured in your cup but when you tasted, you said it had a beautiful crema…🤔

  • @aymenaqraa5900
    @aymenaqraa59002 жыл бұрын

    Please we need receipt for Milkshake and freakshake Frappuccino all things you know maybe more names

  • @rizasri

    @rizasri

    2 жыл бұрын

    I don't understand

  • @collinmartin3589
    @collinmartin35895 ай бұрын

    one should note that this is not proper crema it is just foam similar to the increased crema foam created by the double walled portafilter in a cheaper espresso machine.

  • @rizasri

    @rizasri

    4 ай бұрын

    Agree on the double wall

  • @h34p
    @h34p9 ай бұрын

    Sorry to crash the party, but that's not crema. plain and simple.

  • @rizasri

    @rizasri

    9 ай бұрын

    Forgiven!

  • @umbertoprocentese
    @umbertoprocentese Жыл бұрын

    Please don't follow this types of videos. Follow the videos of bialetti and illy. You have to use it fresh water just beacuse when you put the moka on the stove the water will boil at 100 celsius degree and then the coffee will start to come out. The moka preparation is not for crema but just for an espresso size coffee, if you want a crema espresso you have to use an espresso machine cause the extraction pressure is much much higher, for example 8 bar, that the about 1.1 bar of the extraction with the moka. The moka brand will not affect your coffee taste, but how much you will use it the moka in the future because the first 3/4 coffee you have to throw it in the garbage. Then using the moka frequently will change the colour of the gasket and the taste improves. In Italy we use Bialetti just beacuse is an Italian brand, it makes beatiful and well constructed moka, and you find replacement parts easily.

  • @grumpyae86

    @grumpyae86

    Жыл бұрын

    Nah.. use James Hoffman technique. Makes amazing moka.

  • @K0sm1cKid

    @K0sm1cKid

    8 ай бұрын

    Depends on the coffee for me. I have noticed darker roasts taste better when I start with room temp water, but medium roasts are better with the boiling water method. But I am no coffee expert.

  • @LenKirin

    @LenKirin

    5 ай бұрын

    Already misinforming. The water is pressurized; it's boiling past 100C. 9 bar extraction for espresso, not 8. Also, fresh water takes longer to heat up; conductive heat transfer thru the pot itself will burn your coffee before then from the heat source. I agree that these types of videos aren't the best; they misinform as well, but don't spread misinformation to beat out other misinformation.

  • @11BossLife11
    @11BossLife114 ай бұрын

Келесі