How To Make Money Building Cornhole Boards
A lot of people think of cornhole boards are just a DIY project. Well, we make custom cornhole boards all of the time and we make MONEY doing so.
In this video, I break down my steps to building clean and durable cornhole boards. Efficiency is key and if you take my advice, I promise you can make enough money from cornhole boards to make shop improvements, upgrade your tools, etc.
If you have any questions or feedback, please leave a comment!
Here is the cutlist:
3/4" Plywood: (2) 24" x 48"
2x4: (4) 47 7/8", (4) 20 3/4", (4) 12"
Other Materials needed:
- Pocket Hole Jig (a total of (16) 1-1/4" pocket hole screws are needed 2-1/2" if using Kreg Jig)
- Drill (3/8" & 3/4" drill bits)
- (4) 3/8" bolts (4" long)
- (4) 3/8" washers
- (4) 3/8" nylon lock nuts
- 6" hole saw or router jig (if using a router, 1" flush trim bit)
- Wood glue
- Brad nailer and nails
- Clamps (not necessary, but definitely help)
- Old paint can
- Socket wrench to tighten bolts
- Choice of paint/primer or stain
- Choice of clear coat (water based or oil based)
Here's a link to a lot of these materials in my Amazon store: www.amazon.com/shop/lazylabacres
My Website: www.lazylabacres.com
Instagram: / lazylabacres
#diy #howto #cornholeboards
Пікірлер: 1 600
This is how I paint them kzread.info/dash/bejne/X4KbypOvYMW-grg.html
My son and I built a set of these close to 40 years ago. Everyone that came over for barbecues and such loved the game, but it was all new to them. My son is now 47 and his kids use the same original thing we made. Makes you feel kind of good.
@Immolate62
4 жыл бұрын
If you change the workflow, you can use a drill press to properly align the hole. If you don't have a drill press, you can get a drill guide for drilling holes with a regular drill straight. I always recommend drilling for the show side so any tear-out will happen on the hidden side, but if you make sure there's a backer like he's using here, you shouldn't have any tear-out.
@Gravy_Master
3 жыл бұрын
@@Immolate62 Hey Tom - looks like the guy was just getting a little sentimental, not looking for detailed building tips.
@Immolate62
3 жыл бұрын
@@Gravy_Master thank you for pointing that out, guardian of all sensibilities. What would the internet be without self-appointed protectors?
As a female with no woodworking background what so ever. This was an amazing video! You described everything perfectly and I understood what you were doing from start to finish! I just recently found my interest in making things out of wood and finding videos like this is what helps me out the most! Im not the most knowledgable person when it comes to this yet. But you made this a quick and EASY step by step! So, thank you!
My sister-in-law started making and selling these out of her garage. Now she’s making amazing looking boards and she’s busy as hell. She has upgraded her tools, graphics, paints, and techniques. Great side hustle
I have been struggling with the legs so much, I'm glad I checked this video to see your method for the legs. Shame I didn't find this a week ago when I started the whole process lol.
Made a few sets using your techniques and it made it so easy! And they came out amazing thanks to your ideas! Thanks for taking the time to make this video!
Nice build! Excellent blend of functionality and economy. I don't make cornhole boards for money, but I do make them for gifts and donate them to local charities for fund raising events and such... this is the first 2x4 build I've seen that looks like it was done by someone who gives a crap. Excellent tip about the frog tape and gel stain! I might suggest only three minor things to improve your build: 1) put a 1/8" or 3/16" radius roundover bit or chamfer bit in your router and run it along the top edge of the top plywood board and around the edge of the hole on top and bottom (or just sand a little relief into these edges). This will reduce splintering of the edges of the plywood top and make them more comfortable on the hands when reaching into the hole to pull bags out. It will also help to reduce the "bag buster" effect of someone throwing a bag that lands directly on a sharp corner at the front of the board. 2) place a cross beam in the frame along the underside, running horizontally - even though you're using 3/4" plywood, it still flexes when a 1 lb bag lands on the middle of the board... this crossbeam will reduce "bounce" so that the boards will play a bit more "true", especially if they get used on a hard surface such as a parking lot or paved driveway. Since you're using 2x4 frames they are plenty strong, so this crossbeam isn't for strength, just to reduce flex of the top - it can be even 1x3 - just so it's flush against the underside of the top board - pocket hole screw and glue it into the frame, pin nail it down from the top too. 3) place a cross board between the legs - it can just be a 1x3 or 1x4 pocket hole screwed horizontally between them - somewhere between the lower edge of the frame and the ground, about 2/3rds of the way towards the ground. This will help with leg stability (though with 2x4 legs that's not a big deal in your build) and it will also help keep bags that are "air mailed" directly into the hole from bouncing/rolling out the back. This is a big convenience for drunken beerbecue score keeping ;) The above would add about 15 minutes total to your entire build, and maybe an extra 2x4 or 1x3 and 16 more pocket hole screws total per set of boards to the material cost, but will add a relatively large amout of quality to the playing experience relative to the cost (an extra $10?) for your customers.
@LazyLabAcres
5 жыл бұрын
I appreciate the feedback and thanks for the support!
Great video. I do a little woodworking but this is a wonderful project to build with my son and take camping. Thanks for the time to share your method.
@LazyLabAcres
5 жыл бұрын
Thanks for the support!
@davidmayhall6567
5 жыл бұрын
Do you take turns corn holeing each other? 😮
I literally caught myself smiling when you used the paint can to get the angle needed. That's brilliant.
Dude! Great great great video. Very thorough and I appreciate how you broke everything down. Many tutorial videos leave out small but important details. You nailed it. Thanks!
@LazyLabAcres
5 жыл бұрын
Thanks for the feedback!
I've built a bunch of these, and used to use 1/2 plywood and 2x4s. A lot of people have complained of the weight, so I started running the 2x4s down to about 1" with a thickness planer, and using 1/4 maple plywood. I like the flush trim detail, great idea!
Great job explaining the process and work needed to do one of these boards. Great work sir and keep up the good job 👍
@LazyLabAcres
5 жыл бұрын
Thank you for the support!
Dude, I love that you simply tell it like it is. You don’t get overly technical, but it’s clear that you know your stuff. Excellent tutorial!!
@LazyLabAcres
4 жыл бұрын
Thanks for watching and for the feedback!
Thanks, for the detail, I wish more people on KZread would explain projects like you!
@LazyLabAcres
5 жыл бұрын
Thanks for the support!
I've been making corn hole sets for about 5 years. I appreciate your video! Using a couple of your tweaks, I can streamline things a little better. Thanks!!!
@LazyLabAcres
5 жыл бұрын
Thanks for watching!
@JamesRoberts-gn9oz
4 жыл бұрын
Amy Caves t
I gotta say, this was the simplest and most helpful video I've found on how to make these things... THANKS!
You broke this down perfectly. You kept it simple and it was insanely easy to follow along. Thanks man.
Great idea. Thank you for making it simple. Thank you for your service as a police officer. My son is one also.
I’ve made a hundred of these games and never thought of doing the legs like that. Great idea! Thanks
@LazyLabAcres
4 жыл бұрын
Thanks for watching!
I have been struggling with my leg construction, but after watching your video it all makes sense now! Great job.....Thanks!!
@LazyLabAcres
5 жыл бұрын
Thanks for watching!
I have my own business and this may be the extra money making deal I need. Thank you for the inspiration and you video is excellent.
Great instructional video I'm looking to make my first set this weekend and glad I found this gonna make my process so much quicker.
Great instructions man. Simple and straight to the point. I would love to see the end product and stencilling/ paint process as well. I love the router jig idea for making the hole and flush trimming the sides. Your video was in my suggestions group, now I'm a subscriber.
@LazyLabAcres
5 жыл бұрын
Thank you very much for the support!
@themostamazingblaine
5 жыл бұрын
That router jig is brilliant, I've had my ass kicked by a 6in holesaw more times than I'm proud of.
one of the best woodworking vids I've seen on any build. thanks for the clear information!
All of your videos are great. It’s nice to see that you have so much pride and craftsmanship in your projects. I look forward to watching more of your videos. Jam up work.
@LazyLabAcres
5 жыл бұрын
Thanks for the support, I'll keep em coming!
Definitely show how much you can sell for as well as the finished product next time. You have all the ingredients to make an amazing video, and that would make it worth our while watching. Thanks for the tips!
@LazyLabAcres
5 жыл бұрын
Thanks for watching and thanks for the feedback!
As soon as I started watching the video I added up the cuts trying to figure out how it would add up to 24in wide. I do like the flush cut trick! Thanks for the information!
One of the best videos I've seen as far as simplicity and thoroughness! Great Job!
My 14-year old son watched your video and now has a side business making these things. He's sold 5 of these so far and this last set turned out very nice! Thanks for the video!
@LazyLabAcres
4 жыл бұрын
That is so awesome! Thanks for the support!
If you use 1x4 it's easier to find straight pieces. I also use the pocket hole screws from underneath to secure tops. Zero filler needed.
By watching your video I've cut my time in half on making boards. I just wanted to say thanks and keep the videos coming.
@LazyLabAcres
5 жыл бұрын
Awesome! Thanks for the support!
I respect your choice to spread information vs gatekeeping it. Thank you! We will pass it on
Excellent video. You explained all the details most people miss. Thank you!
Awesome video and super simple to follow. I'd be interested in seeing how Jamie makes the vinyl designs and paints the boards.
@LazyLabAcres
5 жыл бұрын
Thanks for watching! We are planning on doing that video in the near future!
This is awesome bro I have thought about doing a few years ago but with work and my family all my time is taking up with my job and my family in which I love them more then anything in this world so maybe now that my kid is 13 I can have him help me and we can start our own wood shop together lol
@LazyLabAcres
5 жыл бұрын
Absolutely get him involved!
Your video is great! We’re trying to make 8 sets for family for Christmas. 1 down...7 to go. We keep watching your video and it explains everything we need to know, so well. Thank you so much!
@LazyLabAcres
3 жыл бұрын
Thanks for the support!
First time on your channel. Definitely subscribing. You're the man! Thanks for this video and your humbleness in spreading the wealth and knowledge! Takes a real man to make another man better.
Really good video. Thank you. The paint can trick is very smart.
@LazyLabAcres
5 жыл бұрын
Thanks for watching!
Great information I like the jig you made for the hole. I don’t know how many times I twisted my wrist using the 6 inch hole cutter
@LazyLabAcres
5 жыл бұрын
The hole saw can definitely be a pain
@knkincabotkent9486
4 жыл бұрын
So how did you make the pattern or template?
@dfgroup
3 жыл бұрын
@@knkincabotkent9486 Yeah what he said!
Thanks. So generous of you to share. Hope you continue to prosper!
@LazyLabAcres
4 жыл бұрын
I appreciate the support!
Great video! Simplified, step by step for beginners, which I am! Going to see if I can make this with my grandson. Would like to see your finished product. Thanks for sharing! You have a great talent for teaching. You should be a woodshop instructor. 👏
We used the use staples through the top. We now blind pocket screw from underneath. Much stronger and better looking. We also recess our frames and round our corners to not rip the bags. We add a washer between the leg and the frame to prevent rubbing as the legs swing. The jig for cutting the holes are definitely a must.
@LazyLabAcres
5 жыл бұрын
Thousand different ways to do it 👍
@13paulieg
5 жыл бұрын
Nice tutorial
Great video. Could you do a quick video on your router jig for the hole??
Best video I’ve seen on making cornhole boards so far ... simple yet quality! Love it man, gonna follow on Instagram now.
@LazyLabAcres
5 жыл бұрын
I appreciate the support! My wife uses a cricut stencil cutter to help out with painting and you can find them online or in a bunch of different stores. We'll be doing a video on stencil layout very soon!
very well explained loved showing all supplies/materials needed. very helpful..great video
@LazyLabAcres
4 жыл бұрын
Thanks for the support!
Very good detailed video. Also would have like to seen the final product.
@LazyLabAcres
5 жыл бұрын
Thanks for watching! Pictures were posted on Instagram and Facebook. I had a deadline to meet so unfortunately I didn't have time to film. They were painted, clear coated and sent on their way!
Great video! Thanks for sharing. I intend to build a pair soon. Would enjoy seeing a video on the cricket stencil cutter and the final painting process. Thanks again.
@LazyLabAcres
5 жыл бұрын
Thanks for watching! We have a stencil video coming soon!
Great job, I understood everything perfectly,gonna build my own, much appreciated 👍
Thanks again. I just make these for friends and always refer to your video since it's always a few months between builds. I don't make money, I just enjoy giving them as gifts....kudos
@LazyLabAcres
4 жыл бұрын
I appreciate the support!
Nice job! I think this might be a good project for me
@LazyLabAcres
5 жыл бұрын
Fairly quick and easy project!
Wow, just wow. You have a gift for teaching. Thank you.
@LazyLabAcres
4 жыл бұрын
Thanks for watching!
Brilliant mate, i used this video to show my son, then we made one... great father n son activity
Great breakdown of the build! I love the router jig idea. I need to build one of those. I would love to see the breakdown of how you paint your artwork on to the boards. I have played around with a few techiniques, but haven't really dialed anything in just right yet.
@LazyLabAcres
5 жыл бұрын
We are planning on going over the painting process in a future video. My wife uses a stencil cutter to help paint them
What will a set cost me that you make with your standard pattern on it? Thanks and great video as always
Thanks for the video. I really liked your practical approach. I particularly liked that you continually came back to what's important, efficiency, consistency, return on investment.
I really enjoy seeing how you make the corn holr game. Job well done.
router jig idea is not bad. I struggle with the 6" hole saw.
@LazyLabAcres
5 жыл бұрын
Router jig is wayyyy better in my opinion. I used the hole saw for a while and it was rough and took a toll on the drills as well
@jchet27
5 жыл бұрын
How did you make your jig so perfectly round?
@LazyLabAcres
5 жыл бұрын
@@jchet27 my small CNC cut it, but you could easily run the hole saw through some MDF and make your template that way
@firechicken5
4 жыл бұрын
jchet27 you can also use a different router jig to cut the hole for this jig. It’s like a big base for the router that you can drill a smaller hole in and pivot the router in a circle. That way you’re not buying an expensive hole saw that you only use once
@troseii9899
4 жыл бұрын
I used my drill press.
I'm curious about the painting & final finishing. Do you / will you have a video of this? Great video btw
@LazyLabAcres
5 жыл бұрын
Thank you! We plan on making a video covering that topic really soon!
@wiscowoody2716
5 жыл бұрын
kzread.info/dash/bejne/ep54xdqce9LSorg.html
Thankyou for insight and quick tips, I made my protype and sold in 1 hr I now have 9 more orders Thanx Gary
NESTING, great idea, what a difference for carrying and storage, thank you for sharing
what do you sell these for finished and unfinished?
A quarter inch spacer when you draw your line off the edge of your workbench will make your boards regulation. 10 second fix and you can advertise as official height.
@LazyLabAcres
5 жыл бұрын
👍
@666hobart
5 жыл бұрын
regulation drunken bar games, I love it!
@waynebanks8656
4 жыл бұрын
Regulation?????? Get da fuck outta here with that shit man, everyone Campin is buzzed up and not giving a fly 747 Fuck about that part.
Love it Man, great example. You cover everything. Happy Father's day to you tomorrow.
@LazyLabAcres
5 жыл бұрын
Thanks for the support!
I wanted to find a video to build cornhole boards with my son and you gave some great tricks to make it easy to build some in our garage thank you and yours looks great. I’m going to use your way of making them and I’ll look like a genius lol
Awesome instructional video! Quick question, would you mind sharing how much you’d charge for such a set?
@LazyLabAcres
4 жыл бұрын
typically a few hundred dollars!
Are you squaring off your 2x4 edges since most are rounded?
@LazyLabAcres
5 жыл бұрын
Nope, not worth the time to do so. Flush trimming makes everything nice and sharp up top, but the bottom stays rounded so they don't slice you when you pick them up
I've watched other video's building these and your video is the best I've seen. Great job explaining how to do it. Thanks for the video.
@LazyLabAcres
3 жыл бұрын
Thanks for the support!
Thank you for taking the time to show us this
"I am the great Cornholio!"
@kcajmortsnnew1488
5 жыл бұрын
this be money hole , this be corn hole
@GoblinsWorkshop
5 жыл бұрын
@@victorbunch7725 You must be too young to know who Beavis and Butthead are.
@victorbunch7725
5 жыл бұрын
@@GoblinsWorkshop No i just never cared to watch stupid shit like that and the family guy ! By the way i am 39 for the 37th time,,,,,,
@captralf
5 жыл бұрын
Are you threatening me?
@GoblinsWorkshop
5 жыл бұрын
@@victorbunch7725 im 41
What price point is reasonable? I've seen and played them but never bought one, and have no idea of what they fetch. Some mention of the profit margin would be a nice addition to this video.
@EvanstonKabob
5 жыл бұрын
Mark Conger I've had multiple people purchase sets of these for graduations and such and they didn't have a problem paying $250 for them
Awesome tutorial, to the point, easy to follow and no-nonsense jibberish. Thanks!!
@LazyLabAcres
5 жыл бұрын
Thanks for watching!
Best tutorial ever man! Thanks for all of the detailed info step by step. 💯
@LazyLabAcres
4 жыл бұрын
Glad it was helpful!
Nice vid but can you share total materials costs and what the final price point is? You alluded to how solid the margins were but no figures to back that up. Thanks
@rhyssaxton9431
5 жыл бұрын
were i live in Canada, materials for this project would range from 60-80$ for materials (depending on quality of wood/stain used) and you can buy cornhole boards from $85 -$250$ .I would say if you were to build these exact same cornhole boards as he did you could sell online for $125-175 including bean bags!
Watched all the way to the end just to see what a cornhole board is. I admit i fast forwarded towards the end but still don't know!!
@rivi67
5 жыл бұрын
its like shuffleboard game
@stevefranks9239
5 жыл бұрын
its a stupid game with a even stupider name
@LazyLabAcres
5 жыл бұрын
Thanks for watching! It's a backyard game
@estherhaberman1840
5 жыл бұрын
peter wright it’s a bean bag toss game.
Came out extremely professionally. Looks like something you would buy at a nice store. I would buy it.
This is one of the most informative videos on the whole internet!
What did it cost to make? How much do you sell them for? They seem heavy
@themostamazingblaine
5 жыл бұрын
About $50 for lumber, paint/stain/finish varies but shouldn't be more than $20-30, my signature was doing light burns with "map gas" (or a plumbers torch) then clearing over the burn. Vinyl stickers can get pricey if you cant do them yourself, not to mention vinyl machines can be annoying/expensive. If you don't have all the tools for this or you don't plan on doing woodworking much this definitely isn't a project I'd pursue, might as well just buy them. I sold my boards for $160 without vinyl, vinyl prices would vary based on what my decal guy would charge me, usually I'd mark up $5-10 on the sticker because applying larger vinyl can be annoying. If you buy stain's by the gallon as well as your clears it can help cut down on your cost as well. 3/4 plywood is the bulk of the weight, 2x4 sections probably only weight 5-6lbs, all together they can't be more than 40-45lbs.
Couple questions...what do you charge for this type of board and how much for an unfinished set? Do you make bags as well? I have been making sets for about 6 years and always wonder what others charge...we charge $225-250 for full paint and $125 for unfinished and we include bags (we make the bags too). All regulation and our decks are cabinet grade
@LazyLabAcres
5 жыл бұрын
I don't make unfinished sets because we market to people who want custom paint and stain. You could probably ly charge more since you supply the bags. I recommend the "all weather" bags from victory tailgate because they last forever
@patricktaylor7021
5 жыл бұрын
@@LazyLabAcres yeah, we try to stay "official" so we use corn filler...we have looked at the plastic pellets to make all weather sets but haven't made any yet...where you located? I'm in Michigan
Excellent video. Good production quality, information and instructions. Thank you for sharing.
Great video! Very informative and instructive. Retired LEO here! Watch your six... run 'em all through LEIN!
@LazyLabAcres
5 жыл бұрын
Thank you for the support sir!
"I stain all my cornholes with the Marlboro design!!!"
How much would you sell this set that you just made?
@rhyssaxton9431
5 жыл бұрын
were i live in Canada, materials for this project would range from 60-80$ for materials (depending on quality of wood/stain used) and you can buy cornhole boards from $85 -$250$ .I would say if you were to build these exact same cornhole boards as he did you could sell online for $125-175 including bean bags!
@jimc5229
4 жыл бұрын
Rhys Saxton that’s waaaay too low. I make and sell similar style for $225 and will be raising my price to $250-$275.
Two minutes into the video and I already liked and subscribed . Good info and good delivery.
This is great stuff. I saw a pair of cornhole boards in a local antique shop not too long ago. They had a great design on the top and a burned in logo of the creator and year it was built and a number. They looked great but they were 70 years old. I hope you are doing the same to your boards. I am in the middle of designing an entire line of stuff and will include cornhole boards for sure. And I will burn in my logo and date on the underside like I saw in the antique store. Thanks for this video. Very informative and encouraging.
@LazyLabAcres
5 жыл бұрын
Thanks for the support!
I appreciate you reducing the audio when using your power tools. Too many diy’ers don’t.
@LazyLabAcres
4 жыл бұрын
I don't understand why people leave the volume up. No one wants to hear that hahaha
@MyVantasticLifeVoyage
4 жыл бұрын
Exactly right and for listeners like myself, I’m often wearing earbuds, so all that tool noise going right into your ears is the opposite of hearing protection. #stopthehammering
Question: I had planned on ordering a 6" hole saw, but I like the router method better that you use. How do you cut the hole in your jig so straight? Whenever I cut them free hand with a jig saw, they look kind of wonky. Any advice without buying a hole saw? Hole saws do kind of suck to use, like you said.
@BrianHw1
4 жыл бұрын
Nevermind, I saw the answer in one of the comments below. I'm looking up how to cut a perfect hole with a router now.
@allenlebeau1744
4 жыл бұрын
How much do you charge to build the corn hole boards?
@LazyLabAcres
4 жыл бұрын
Thanks for watching!
@LazyLabAcres
4 жыл бұрын
Usually $250
I've been looking to take woodworking classes for years. Unfortunately, no one in my area teaches them. Thank you for the video!
@LazyLabAcres
4 жыл бұрын
Thanks for watching!
Great video, thanks for putting it up here. I followed what you did and the boards turned out great. Thanks for the Frog Tape recommendation. Much cleaner lines than the blue stuff.
@LazyLabAcres
5 жыл бұрын
Glad to hear the video helped. Thanks for the support!
Weird. I always thought cornhole was a euphemism.
@LazyLabAcres
3 жыл бұрын
Whatever floats your boat
How much would you sell these for so I can get a good starting price
Thanks for sharing. Appreciate it very much. I do a lot of wood working projects, and people have been asking me to make them some corn hole boards. I just needed to know the sizes and measurements of everything. Thank you!!
Definitely gonna try and make a set of these this summer. Awesome video!
actually i clicked it cause i wanted to know wth a cornhole board was
@LazyLabAcres
5 жыл бұрын
👍 thanks for checking it out!
@patrickkeller2193
5 жыл бұрын
@@LazyLabAcres I stil have no idea what it is except a board with a hole obviously.
@LazyLabAcres
5 жыл бұрын
@@patrickkeller2193 typically there are bags filled with corn that you toss onto the boards. You get more points for getting it in the hole. Very simple and fun game
@tkarlmann
5 жыл бұрын
Me too!
@islandgardener158
5 жыл бұрын
I thought it was going to be a new of removing kernels off the cob
Why didn't you show us the painted finished boards?
@LazyLabAcres
3 жыл бұрын
They weren't being painted until a few days after I finished the video. Bunch of pictures on my IG though
Great directions, sizes of tools, materials used and sizes! Awesome job, thank you!
@LazyLabAcres
4 жыл бұрын
Thanks for watching!
Good stuff, appreciate the relaxed approach to the build.
@LazyLabAcres
4 жыл бұрын
Thanks for watching!
2X4's are kind of overkill for this. Using a 1X4 or even some plywood ripped at the correct dimensions is going to make this a lot easier, not to mention lighter and when factoring in the cost of materials possibly even a little cheaper to produce. Not to mention that you won't have to waste time searching through stacks of 2X for decent lumber only to have it twist on you if you don't use it right away and it starts to dry.
5 жыл бұрын
I agree. Still I don't see how there's any real money to be made after the costs of materials and labor. Then again he might be selling them for $250.
@calebsayranian4205
5 жыл бұрын
@ 250 is what I sell mine for. 300 if they want more than the standard design.
@LazyLabAcres
5 жыл бұрын
Thanks for the feedback y'all!
@playhardbegood
5 жыл бұрын
Actually the weight of the 2x4's help with game play. It's just a bit more solid when the corn whole bags land.
@glennjamieson1635
5 жыл бұрын
If you use 1/2 inch plywood brace the underside with a 1x4 midway in the frame to eliminate the bounce.
How much are you charging for finished boards??
@LazyLabAcres
5 жыл бұрын
Each set is different based on the design. You have to create your prices based on your own market and cost, labor etc.
@natebrooks7015
5 жыл бұрын
is it a secret?@@LazyLabAcres
@LazyLabAcres
5 жыл бұрын
@@natebrooks7015 top secret
@AndrewBrowner
5 жыл бұрын
@@LazyLabAcres cost break down and how much to charge is always the hardest part and nobody seems to want to share any of that.. its a cornhole board its really not gonna change much between regions.. probably 20% more in the city compared to rural but i think the cornhole stock is uniform nationwide... maybe it will replace the gold standard
@tomspallone1868
5 жыл бұрын
Andrew Browner I always wonder about things like that. What makes it more frustrating is, I’m a maker. I have a hard time looking at things for a price and not thinking, “I can make that!”. So, I don’t know how “normal” people perceive the value of things. How much would someone pay for this? I’m just guessing.....$50-$75? And they still need to get or make the “corn” bags. Materials cost, what, $30-$35? Maybe a 2 hour build with extra time for finishing. I wonder if the effort is worth it myself.
Awesome, love the way you explained your method!
@LazyLabAcres
5 жыл бұрын
Thanks for the support just wanted to keep it to the point (still took 22 min though lol) no need for a miter saw montage on this one!
Nice video man!! Very well done and fun to watch. I will make some myself. Thanks so Much!!!