How to Make Layered Signs: Tips & Ideas for Small Business & Hobbyists- Laser Cutter Possibilities
Тәжірибелік нұсқаулар және стиль
www.xtool.com/?ref=QeZa4pIV3R...
Making custom wooden signs has always been a great deal of fun for me. I've made them with many different tools and materials. This video shows the most efficient way to make high quality signs for small business sales or gifts to friends and family as a hobbyist. I show the steps and tips for making 3D layered signs as well as ideas for designs, materials, and all the possibilities.
Additionally, I showcase the xTool P2, a 55Watt CO2 Laser and show how this unit or the other laser machines can transform your projects and exponentially increase efficiency. Even with zero woodworking or laser experience, you can be up and running in no time. Bottom line, this machine is incredible and can help your small business or side hustle explode with productivity and profit. It's pretty awesome for hobbyist projects too.
#xtool #lasercuttingmachine #lasercutting #laserengraving #woodworkingtools #woodworkingbusiness
-⏱Timestamps⏱-
00:00 Introduction
00:53 MDF & Double-Sided Tape Sheets
03:01 Painting Tips
05:03 Plywood Signs
08:39 Hardwood Plywood
09:50 Acrylic
13:42 "Shower Board"
14:25 Laser Options & Benefits
17:21 Final Thoughts
To learn more about the laser machines, add on accessories, other machines, and more, check out this link: www.xtool.com/?ref=QeZa4pIV3R... (Purchases made using this affiliate link helps support the channel and enables more content like this.)
💡Promo Code ($80 off Use code: xTool68)💡
💵US Store: bit.ly/43cjsP8 (Use code: xTool68)
🍁CA Store: xtool.pxf.io/jr0qGM
💶DE Store: bit.ly/49KwvKc
💷UK Store: bit.ly/3Tf0QcJ
💶EU Store: bit.ly/48Sh7ua
💶FR Store: bit.ly/4c5upq1
➡️xTool P2⬅️
💵US: bit.ly/3PhBxWk
🍁CA : xtool.pxf.io/zNGJ9G
💶DE: bit.ly/3TdE4lB
💷UK: bit.ly/3Vfny7k
💶EU: bit.ly/4ad3B5r
💶FR: bit.ly/3wQBZ7G
➡️xTool S1⬅️
💵US: bit.ly/4c8eC9L
🍁CA : xtool.pxf.io/Or0P3P
💶DE: bit.ly/3Vb714l
💷UK: bit.ly/3wZCvjE
💶EU: bit.ly/3VbLSXN
💶FR: bit.ly/3ThgODj
➡️xTool F1⬅️
💵US: bit.ly/3Tlqzk6
🍁CA : xtool.pxf.io/dag6j2
💶DE: bit.ly/3wTlJTu
💷UK: bit.ly/43dlajx
💶EU: bit.ly/3v8NBT0
💶FR: bit.ly/3IywehF
▶️Laser Materials & Accessories◀️
⚙️Inline Duct Fan: bit.ly/3IyfwPx
🪵Hardwood Plywood Mix: bit.ly/44gOkif
🪵Cherry Plywood: bit.ly/4chl3r5
🪵Bubinga Plywood: bit.ly/4c7MdAV
🪵Walnut Plywood: bit.ly/3VgGnqJ
🪵1/8" Basswood: bit.ly/3TwWvDi
🪵Long 1/8" Wood: bit.ly/48SfDQn
⬛Thin 1/25" Black Acrylic: bit.ly/4dhhd1K
⬛Acrylic Pack: bit.ly/4a9znAi
🟦Colored Acrylic: bit.ly/3wSeLyd
⬜Mirror Acrylic: bit.ly/4agEE8S
⬜Glitter Translucent Acrylic: bit.ly/4bAyv8w
⭐️10 Free Digital Files! ⭐️Creative Fabrica is an amazing resource for getting graphics, fonts, project files, & so much more. Right now you can get 10 free downloads and an amazing deal on an all-access subscription. For the cost of a few files you’d find on Etsy, you have unlimited access to download all kinds of files. Plus, they all come with a commercial license, allowing you to sell without an additional cost. Check out my affiliate link here: www.creativefabrica.com/promo...
-📸Instagram🎥-
/ 6_8woodworks
-🔨Tools/Supplies I Use🔨-
Full List: www.amazon.com/shop/6_8woodworks
-As an Amazon Associate, I earn from qualifying purchases.-
Laser Cutting/Engraving Supplies: amzn.to/3NfRLNX
Double-Sided Tape Sheets: amzn.to/3DrEn4Q
Large Double-Sided Tape Sheets: amzn.to/3LuphQl
CA Glue: amzn.to/46iXs5D
CA Glue Pack: amzn.to/48jtNv0
Tweezers: amzn.to/48pF6BZ
Acrylic Color Pack: amzn.to/471ccqV
Laser Masking: amzn.to/3CBSMLo
Nylon Brush: amzn.to/3OamWMs
Roller: amzn.to/3qU24jq
Card Spreader: amzn.to/3qU24jq
Calipers: amzn.to/3Xcvy7W
Bubinga Plywood: amzn.to/43HtmH6
Walnut Plywood: amzn.to/3OaSK2k
Spray Lacquer: amzn.to/3rzsXJx
For more options on acrylic as well as the pre-finished hardwood plywood, check out www.craftcloset.com They had the best selection, prices, and good deals on shipping.
The sander I use has amazing possibilities that virtually eliminates all hand sanding. Seriously. Particularly using their foam abrasive pads, I was able to clean up any burn residuals in no time. Check out the sander, foam abrasives, other abrasives and more at surfprepsanding.com Use my affiliate code “68WOOD” for 10% off your order & to support the channel. It's a game changer. Seriously.
For more about woods I use, where to buy the wood, and other tips and info, check out my Wood 101 video: • Wood 101 For Woodworke...
-💻Website💻-
www.sixeightwoodworks.com
Пікірлер: 112
💵US Store: bit.ly/43cjsP8 🍁CA Store: xtool.pxf.io/jr0qGM 💶DE Store: bit.ly/49KwvKc 💷UK Store: bit.ly/3Tf0QcJ 💶EU Store: bit.ly/48Sh7ua 💶FR Store: bit.ly/4c5upq1
I have never seen a workshop that was clean, organized, and full of colors. Most workshops are dusty and scattered. beautiful work.
@SixEightWoodworks
9 ай бұрын
Well, it’s rarely clean. Just for the videos 😆 But much appreciated!
Wait, a HD Panel saw that works?? That is as rare as the Loch Ness Monster!!! Great video BTW!!
Thanks so much, very informative. As an old retired shop teacher I bet your students love you as a inspirational educator. Stay well and safe out there.
@SixEightWoodworks
10 ай бұрын
Awesome! Love when I can do some projects with my fifth graders!
Excellent video tutorial. Thank you for sharing the knowledge!
Great video! Cool items made. I can’t wait to get my hands on this machine.
Love the shop assistant! Great content and pacing. Beautiful results.
@SixEightWoodworks
10 ай бұрын
Thank you so much!!
I always get great inspiration from your instructional videos, and this one is no different! Thanks for all the care you put into each one!
@SixEightWoodworks
9 ай бұрын
Thank you so much friend!
My dad built custom cabinets after he retired. His shop never looked as immaculate as yours. I think I still have sawdust in my lungs from 1999! LOL Love the Hogwarts sign. May have to steal that idea! :) New subscriber because of that! LOL
Great video! I would love to see a more indepth video showing how you build those with the software and CO2 laser.
Im here for the Kraken, looks awesome
I love you! I've been looking for something like this.
@SixEightWoodworks
9 ай бұрын
Hope it helps!
Great video, some great tips here, enjoyed it.
Lots of great ideas, I am impresed at all your work!
I'm going to be 100% honest, I watched this and subbed just for the Kraken signs!
I enjoyed watching. Thank you and for reminding us about copyright
Great video thanks for sharing!
@SixEightWoodworks
9 ай бұрын
Thank you!
I’ve been using my thunder for 7 months, and I just found out about staining. Never thought about it! Husband even owns a wood shop!
@SixEightWoodworks
9 ай бұрын
It’s one of my favorite methods. So quick and inexpensive.
Hi from Spokane, nice video, super clean shop. My shop is my garage, not nearly as clean, lol. Thanks for some ideas !
Thanks for the ideas, may God bless you
Thank you so much for this video!!! So informative!!!! I have the XTool D1 Pro 10W. I'm not sure if it has the same capacity to cut, score, and laser all the materials you used.
Thanks for all the information!
Not only are your signs bad ass but so are the teams. Hopefully, we'll get the Sonics back again soon. (Even if it will never be what we had). I do signs, Woodworking & refinishing furniture for fun on the side. Was happy to find your channel since your taste is good! LOL! Keep up the good work!
@SixEightWoodworks
9 ай бұрын
Awesome! Hoping the Sonics will be back within a few years now that Climate Pledge is done and the Kraken are rocking.
Great video with valuable tips It would be great if you could do more videos like this..
Great video! I am going to purchase a laser cutter soon and this was very helpful. When cutting acrylic, is there protective film on both sides? If so, do you remove the backing and add the double sided tape before cutting? The double sided tape is a game changer, I use it a lot for my paper projects. Thank you for the detailed video.
I own a sign business. Great job on the detailed video!
@SixEightWoodworks
10 ай бұрын
Thank you so much!
Great video... Thank you !! I have a better idea now on how to get creative with my Xtool
I would love to see how you stack acrylic designs in software. I am looking into making badge reels and would like to learn the stacking process, something different. Thank you!
Just a tip for all of you out there. My go to material is called RightPly and is sold at Home Depot also, very inexpensive as it’s sold as underlayment, comes in 3/32” and 3/16”, cuts great and takes paint much better than mdf.
Thanks for the video! What kind of clear coat do you use iver the stain?
I am curious about the permanence of the double sided tape. Does it not give out over time?
You are getting very good at making videos.
@SixEightWoodworks
10 ай бұрын
Thank you
I was contemplating getting a D1, for hobby but then I came across Alienfox combo CNC and laser. Any thoughts on those?
I came here to give you a thumbs up and say GO COUGS!
@SixEightWoodworks
9 ай бұрын
Appreciate. Rough weekend for you, but great looking team. Hoping the conference issues get figured out soon!
What did you spray on the engravings? @like 9:40
Have you tried acrylic paint on the mdf? It doesn't wick into wood.
i thought a diode laser cannot cut acrylic? im new to it and just got a diode 20 watt laser but was scared of trying it. Is there anything to help us understand acrylic with diode lasers more?
I am currently making wood signs and logos myself. I own a D1 10W. I am currently working with Baltic Birch and Basswood. I struggle a lot with warping. I want to upgrade to a CO2 to start using MDF because my 10W takes a lot of passes to cut MDF. I want to sell a little more before I make the jump into a CO2. You have any advice on the warping with baltic birch and basswood?
Nice work !!! Hope to see a more step by step video on layering
do you think the D1 would cut through the shower board or would it be to reflective? Go Hawks!!
How about MDO for exterior projects?
Where do you get your thin mdf?
What exactly is the home depot shower panel? Is it laser safe to cut?
The panel saws I have seen are near perfection, it’s the knucklehead staff member who makes the mistakes. I never hesitate to show them how to use those saws, they probably hate me.
Does dell vostro run lasergrbl decently? Or a dell Intel 7?
How thick MDF and ply boards do you recommend for the signs? Great video and thanks for sharing.
@SixEightWoodworks
10 ай бұрын
These are 1/8” sheets just for ease and the extra weight. I have done 1/4” and 1/2” for backer board though. Just have to account for the added weight.
I got kind of lost as video is moving so fast. Did you leave double sided tape on when you cut it?
What thickness is that MDF?
I would love to see beginner instruction videos for the XTool software!! I’m old and struggling to learn the software. I bought the XTool F1 but haven’t made anything yet even though I bought some Etsy svg files. It would be great if you could walk us through every detail of making something 🤓😬🤞
@SixEightWoodworks
10 ай бұрын
Yes! I’ll definitely be adding a XCS software video to show the steps.
@KD-Bee
9 ай бұрын
@@SixEightWoodworks Yay! Thank you! Looking forward to watching the video!!
Sorry if I missed this part but are you adding the double sided tape to the back of the material before your laser? Then running your file and the laser is cutting through both?
@SixEightWoodworks
10 ай бұрын
You got it. Should have shown it in this video. I did in my ornament video at 13:29 kzread.info/dash/bejne/maypo7STktDFabQ.htmlsi=VBdUm-cdyfS5ScGJ
I'm also in the PNW, where do you get your MDF and ply?
@SixEightWoodworks
9 ай бұрын
The thin MDF I order online. Ply, I just use the big sheets from big box stores. Always looking for a local source though.
What brand of stain did you use for the plywood??? Tia
@SixEightWoodworks
5 ай бұрын
I used Varithane
I have the XTool D1 Pro 20 Watt Laser can that cut Aryclic? I hear no only CO2 Laser can. I'm I wrong?
@SixEightWoodworks
9 ай бұрын
There are some acrylic limitations with Diode lasers. I’d test out 1/8” clear or black before a big order of acrylic sheets. I know acrylic is typically best suited for CO2 lasers.
What adhesives are you using? Your works are awesome!
@SixEightWoodworks
9 ай бұрын
Thanks! I’m using these: amzn.to/3ZxnQql I also use these:amzn.to/3rva7nd
@simpatiko2k5
9 ай бұрын
@@SixEightWoodworks about that double sided tape, do you stick it to the material first and then you laser cut them?
Do the CA glue and double sided tape make for a permanent hold?
@SixEightWoodworks
8 ай бұрын
Yea, they should. Unless there’s extreme shifts in humidity or extreme heat fluctuations, as indoor signs, they should be just fine.
Wait are you from Vancouver wa ?
How do you match the correct colors of characters and sports logos?
@SixEightWoodworks
9 ай бұрын
I just try and get as close as possible. Took some time finding different color acrylics and have quite a few spray can colors now.
Great video!! What software do you use?
@SixEightWoodworks
5 ай бұрын
Thanks. I use xTool’s XCS software. Very intuitive and free.
Do you find that the laser offers a better ROI or more efficient way to make money than, say, your previous "traditional' woodworking products like the charcuterie boards and such? I'm debating whether to invest in a CNC and/or laser cutter to make a few bucks as a side hustle.
@SixEightWoodworks
10 ай бұрын
I’d say the laser would be a better ROI than the CNC. Definitely quicker and more efficient than the CNC. But depends on what you plan on making. With the laser, you don’t need additional woodworking tools to complete products and get a quick sale. With the CNC or other woodworking tools, more tools/bits and consumables are necessary. But again, there’s variables and you might eventually want to branch out and change it up/expand your options. Hope that helps!
@stephenmcgeown
10 ай бұрын
@@SixEightWoodworks Thank you so much for your very informative reply. I hadn’t thought about the additional tools and greater number of consumables needed for the CNC. It’s great to see you branch out and share your learnings with us!
i think most of us wondered in some Point how these are made 😁
@SixEightWoodworks
10 ай бұрын
Thanks!
LOL!!! I think you mentioned licensed products enough times. 🤣😉
@SixEightWoodworks
10 ай бұрын
Maybe just one more time to cover my backside 😆
Where do you source your MDF?
@SixEightWoodworks
4 ай бұрын
Big Blue Laser design or Craft Closet are good sources
need to know on doing charcuterie boards on the laser how to keep the engraving dark not to wash out when wash
@SixEightWoodworks
10 ай бұрын
After engraving add some board oil or wax. If the recipient maintains the board it should stay dark.
How do you get the templates?
@SixEightWoodworks
9 ай бұрын
I just add an outline in the software to what is getting cut so I get the template as well. I’ll work on making a more detailed video in the future with the software.
@dbreezy1201
9 ай бұрын
@@SixEightWoodworks what software do you use? I have v carve a wood router. Is it possible with this?
I see a bunch of Kraken logos... 😁
@SixEightWoodworks
10 ай бұрын
Yeah!! 🦑🦑🦑
Go Hawks!, Bring our Sonics back!, Let’s go Kraken!, Sea us rise! Sounders til I die! Hmm.. did I miss any?
@SixEightWoodworks
10 ай бұрын
You got it! I mean, guess we could add the Dawgs, Cougs, and Zags. But great era for Seattle Sports. Just need those sonics back…should be a few years I think.
Try to find somebody in Homedepot to cut for you
@SixEightWoodworks
10 ай бұрын
It can be a challenge for sure!
You don't really talk about how to set up your layouts in order to do the layered sign look.
Oh! Never mind, I don’t have an expensive laser cutter 😔
what about all the IP infringement?
@SixEightWoodworks
9 ай бұрын
Yep, I talk about it a bunch throughout the video. These are just tests at home. Not selling any copyrighted items for sure.
Great news winnie the pooh is now public domain
@mortonsfarm652
7 ай бұрын
The tiger is not tho. Also the disney version of pooh is still in debate.
You often say that you do not sell licensed products but it is also illegal to make them for your own use as well. No one will likely know if you do but I wouldn't advertise it. I'm not judging you just giving you a heads-up...
Really a sales pitch for xTool and nothing to do with the title.....Where was how to make layered signs??? You show some but nothing on how.....CLICK BAIT
@danjacobsen7645
8 ай бұрын
90% of the video shows exactly what the title says. Not sure what video you watched.
Oh! Never mind, I don’t have an expensive laser cutter 😔
Oh! Never mind, I don’t have an expensive laser cutter 😔