Between my 3D printers and laser engraver I basically should own stock in blue painter's tape at this point.

@MRJSWORKSHOP

Жыл бұрын

Me also, I have use for all projects 👍🏻

Thanks for the video. I'm picking up a laser today. I'm hoping I can cut tape on a screen printing screen and use it to screen print.....thanks for the idea!

Is this supposed to work with IR laser over metal surface? I tried it and it did not cut through the tape. it just dyed my surface blue with the project instead of actually engraving.

I like the Plastic Cutting Board Idea. I lost interest in the Painters Tape Stenciling concept when the Paint would bleed through the Stencil. Exactly like you mentioned. Thank you.

@MRJSWORKSHOP

3 жыл бұрын

Thanks for your thoughts it’s a hit or miss on painters tape

@MRJSWORKSHOP

2 жыл бұрын

Vinyle roller could be helpful to seal the tape edges.

I have seen others use transfer tape instead of masking tape. Your thoughts on transfer tape?

@MRJSWORKSHOP

2 жыл бұрын

If you have transfer tape that would be my first choice otherwise I’m just using using masking tape.

I hate using blue painters tape when laser engraving and doing paint fill. The tape always is hard to remove and leaves a glue residue on the project.

@MRJSWORKSHOP

Жыл бұрын

Hi Thomas Thanks for common comments ! How do you presently handle those problems?

Have you tried transfer tape and if so which do you prefer?

@MRJSWORKSHOP

Жыл бұрын

Hello I mostly use the blue masking tape but what I’m not using that I use vinyl stencil masking. VViViD Blue Stencil Vinyl Masking Film with Anti-Bleed Technology.