Got parts f Feel free to ask me questions in the comments, I like to share my ideas and knowledge and hear others!
Жүктеу.....
Пікірлер: 68
@highspeed95182 жыл бұрын
ABSOLUTELY TOP NOTCH INFO!!! seriously you should make more vidoes this is by far the best video and info and technique out there, i have spent 2-3 hours a day for the last week trying to find this info and its all here in one place step by step with basic tools, well done sir well done
@oldmanhenry75255 жыл бұрын
Good Job dude! keep it up. Love seeing new techniques like this
@Jamesarthurmitchell54 жыл бұрын
Thanks for the video! I really appreciate anybody who is creating content on this subject! For your safety, on the table saw, you should not ever leave small pieces of material between the blade and the fence. That piece can get launched at you at really high speed and do a ton of damage. The safest way to do this is with a cross cut sled.
@chags93074 жыл бұрын
One of my favorite Maná songs in the intro. Nice.
@Name-ps9fx3 ай бұрын
I don't know how this got to be on my feed, I've been searching for "Rocky and Bullwinkle" cartoons, and this popped up. Thinking this might be a previously unknown animation, I watched the whole thing....now I have the know-how to make a suppressor, but I have no need for it, because I lost all my guns in a tragic boating accident years ago. Oh me oh my, whatever should I do with this esoteric knowledge? How will it help me with the search for more Rocky and Bullwinkle cartoons?! I don't know. I just have to take things day by day. 🤠
@robmesser4934 жыл бұрын
Good job sir 💯
@garystuckogh7861
4 жыл бұрын
Thank you Sir.
@johnneedle8119 Жыл бұрын
Where you get the baffles from
@Catchmeifyoucan209Stockton2 ай бұрын
For all you folks who value you little fingers or big fat fingers. Fingers of all sizes dont really matter im going to give you a very valuable piece of advice!!!! DO NOT WEAR GLOVES OF ANY KIND OR LOOSE FITTING LONG SLEEVE SHIRTS ON ANY MACHINES YOU FIND IN A MACHINE SHOP EVER!! MILLS, LATHES ( SHOULD BE A NO BRAINER?, DRILL PRESS. Some things ok say a CNC. Be Smart if theres even a 1% chances you could get caught in a machine dont do it. A lathe with rip your arm off and could kill you. Drills will rip hands off!! Follow these rules keep your 🙌👍🤙
@tommcfarland53682 жыл бұрын
Anyone have a link to the end-mill carbide cutter and what size? Thanks in advance
@mugenrios2k4 жыл бұрын
very nicely done!!! Does the alignment of the baffels matter after doing the DHC. (EG Baff1 clocked 0 Baff 2 clocked +45or90deg Baff 2 clocked +90or135 Baff 3 etc) Being that the cuts are symmetrical I would think no.....
@garystuckogh7861
4 жыл бұрын
Being that they are symmetrically clipped it doesnt matter. if it was single (asymmetric) clipped then they would need to be oriented.
@MegaJcampbell154 жыл бұрын
What drill press at what rpm when using the end mills? Curious if a cheap harbor freight or northern tool drill press will work.
@garystuckogh7861
4 жыл бұрын
Im sure it will
@SgtEaglefort2 жыл бұрын
what do these cuts do for the user?
@twitzig4 жыл бұрын
How well did it test? also, do you have a video of it in testing?
@garystuckogh7861
4 жыл бұрын
Yes, we do have videos of it, but I am retiring from everything, to old and health, my buddy is taking over everything, head over to his channel: kzread.info/dron/S5XUN3Kw5PDQCOl_mZ0CEg.html
@clintmullins86703 жыл бұрын
You think DuHiC's are the way to go for Rimfar? Killer DIY, Thanks!
@jasonbuckner3289 Жыл бұрын
I am curious. Does it matter if the clipped baffles are all aligned all the way down the bore? I am doing a Modular suppressor which I just received approval on my form 1 via the ATF filing individual and electronically. Applied Aug 18th and approved Nov 11th (about 3 months) What do I do with my suppressor as far as clipping the baffles? I have the KM Whisper 7.8” stainless steel modular solvent trap kit. I was able to get it drilled on my drill press with a jig but I’m curious as to how I should clip the baffles. I don’t believe there is any way to align them all perfectly once they’re all put together. Any idea, suggestions or knowledge someone could share on this would be awesome
@akaLuptonPittman
Жыл бұрын
Aligned asymmetric 👍… also, a straight line marked down the entire outside of all baffles tightened to how they’ll be, will give a decent reference for clips
@luisvg645322 күн бұрын
Where do you buy the baffles?
@th3warm0ng3r4 жыл бұрын
Most of these links have been removed from youtube and amazon, what caliber was this for as I am trying to follow it for a 22lr can but don't want to order parts until I am sure. thanks!
@garystuckogh7861
3 жыл бұрын
here you go www.xrttactical.com/
@glbernini04 жыл бұрын
Any estimate on how durable it will be? Can anyone with a good garage make that or does one need a special license?
@garystuckogh7861
4 жыл бұрын
Its stainless steel so it will be very durable. Its whats used by the big pro companies.
@ThePatriotParadox
Жыл бұрын
@@garystuckogh7861Will aluminum work? I can't find stainless anymore because all the unconstitutional bullshit!t...
@MegaJugMan4 жыл бұрын
Damn! Mine warnt squre! Kiddiing.
@haywoodjablome44 Жыл бұрын
Where are the links for the end mills?
@ifell35 жыл бұрын
Quite expensive baffles. Really nice work thou!!
@garystuckogh7861
5 жыл бұрын
I have looked for cheaper ones, but the closest I found was aluminum ones for around the same price.. SS is so much better.
@ifell3
5 жыл бұрын
@@garystuckogh7861 can't remember what other videos have used, maybe something to do with oil filter or something but they brought the baffles loose!! Edit, ak custom, used a fuel filter.
@garystuckogh7861
5 жыл бұрын
OIl filters are crap
@ifell3
5 жыл бұрын
@@garystuckogh7861 I did just edit it, have a look, it's almost a suppressor out of the box, not like your movie oil filter aha
@garystuckogh7861
5 жыл бұрын
Sorry dude but you make no sense at all. You got some very poor english man.
@jfpinkston15 жыл бұрын
Nice job! Where did you buy the baffles to begin with?
@garystuckogh7861
5 жыл бұрын
Seriously bro? Its in the video text and in the video description. Same as my other videos lol people asking where I got the parts. Read the info in video description lol.
@salessi9495
2 жыл бұрын
@@garystuckogh7861 It's not there..
@BackFire10mm
6 ай бұрын
I guess you have to buy some place, but he aint saying, and he aint talking either...lol
@jasontroutman73134 жыл бұрын
What size drill bit would you recommend for making these clips on a .30 cal ?
@TheSchumijr
3 жыл бұрын
3/8”
@tothepoint42402 жыл бұрын
How well did that clip design work? And what cal do you use with it? nice video too!
@chip25674 жыл бұрын
your amazon link for the main tube dos not work
@garystuckogh7861
3 жыл бұрын
Here you go www.xrttactical.com/
@jessemeanlt15 жыл бұрын
What the purpose result of the vent?
@garystuckogh7861
5 жыл бұрын
It makes for better suppression than straight unclipped cone baffles
@samuelsmall40024 жыл бұрын
I am assuming these are aluminum? What about stainless or Ti baffles? It's not so easy using a drill press. Wondering if you have any insight on working with stainless or Ti?
@clintmullins86703 жыл бұрын
Where's Rusty these days?
@igorsvigir58833 жыл бұрын
You are kidding. Where You lost the precision?
@snapforth4 жыл бұрын
You really shouldn't be wearing gloves while operating a drill press. It's not pretty when the glove gets caught in the bit.
@vasudevannair94993 жыл бұрын
0
@alaskanalain Жыл бұрын
I enjoyed that stupid background music way too much.
@mikecollins42985 жыл бұрын
As a person who has inside knowledge of making an illegal item....this is good info if u know the other steps...like i do
@mikecollins4298
5 жыл бұрын
Drill 2 holes on both sides of each cup 4 ventilation. If not it will explode in ur face😰🙏
@moeynola6747
5 жыл бұрын
What's illegal about this?..this is informative for people who want to build there own suppressors on form 1 instead of buying practically the same thing from some name brand company for $800-$1000
@jfpinkston1
5 жыл бұрын
Mike Collins What makes you think this is illegal?
@garystuckogh7861
5 жыл бұрын
This is not illegal at all bro! It is regulated, but not illegal
@garystuckogh7861
5 жыл бұрын
uuhhhh.... no. Looks like you need some more knowledge in this stuff if your saying that
@TyinAlaska8 ай бұрын
Incredibly unsafe use of the table saw. Holy crap. Read a book.
@bhutjokolia4 жыл бұрын
Would have watched the video but the music sucks and was really not needed. Thumbs Down
Пікірлер: 68
ABSOLUTELY TOP NOTCH INFO!!! seriously you should make more vidoes this is by far the best video and info and technique out there, i have spent 2-3 hours a day for the last week trying to find this info and its all here in one place step by step with basic tools, well done sir well done
Good Job dude! keep it up. Love seeing new techniques like this
Thanks for the video! I really appreciate anybody who is creating content on this subject! For your safety, on the table saw, you should not ever leave small pieces of material between the blade and the fence. That piece can get launched at you at really high speed and do a ton of damage. The safest way to do this is with a cross cut sled.
One of my favorite Maná songs in the intro. Nice.
I don't know how this got to be on my feed, I've been searching for "Rocky and Bullwinkle" cartoons, and this popped up. Thinking this might be a previously unknown animation, I watched the whole thing....now I have the know-how to make a suppressor, but I have no need for it, because I lost all my guns in a tragic boating accident years ago. Oh me oh my, whatever should I do with this esoteric knowledge? How will it help me with the search for more Rocky and Bullwinkle cartoons?! I don't know. I just have to take things day by day. 🤠
Good job sir 💯
@garystuckogh7861
4 жыл бұрын
Thank you Sir.
Where you get the baffles from
For all you folks who value you little fingers or big fat fingers. Fingers of all sizes dont really matter im going to give you a very valuable piece of advice!!!! DO NOT WEAR GLOVES OF ANY KIND OR LOOSE FITTING LONG SLEEVE SHIRTS ON ANY MACHINES YOU FIND IN A MACHINE SHOP EVER!! MILLS, LATHES ( SHOULD BE A NO BRAINER?, DRILL PRESS. Some things ok say a CNC. Be Smart if theres even a 1% chances you could get caught in a machine dont do it. A lathe with rip your arm off and could kill you. Drills will rip hands off!! Follow these rules keep your 🙌👍🤙
Anyone have a link to the end-mill carbide cutter and what size? Thanks in advance
very nicely done!!! Does the alignment of the baffels matter after doing the DHC. (EG Baff1 clocked 0 Baff 2 clocked +45or90deg Baff 2 clocked +90or135 Baff 3 etc) Being that the cuts are symmetrical I would think no.....
@garystuckogh7861
4 жыл бұрын
Being that they are symmetrically clipped it doesnt matter. if it was single (asymmetric) clipped then they would need to be oriented.
What drill press at what rpm when using the end mills? Curious if a cheap harbor freight or northern tool drill press will work.
@garystuckogh7861
4 жыл бұрын
Im sure it will
what do these cuts do for the user?
How well did it test? also, do you have a video of it in testing?
@garystuckogh7861
4 жыл бұрын
Yes, we do have videos of it, but I am retiring from everything, to old and health, my buddy is taking over everything, head over to his channel: kzread.info/dron/S5XUN3Kw5PDQCOl_mZ0CEg.html
You think DuHiC's are the way to go for Rimfar? Killer DIY, Thanks!
I am curious. Does it matter if the clipped baffles are all aligned all the way down the bore? I am doing a Modular suppressor which I just received approval on my form 1 via the ATF filing individual and electronically. Applied Aug 18th and approved Nov 11th (about 3 months) What do I do with my suppressor as far as clipping the baffles? I have the KM Whisper 7.8” stainless steel modular solvent trap kit. I was able to get it drilled on my drill press with a jig but I’m curious as to how I should clip the baffles. I don’t believe there is any way to align them all perfectly once they’re all put together. Any idea, suggestions or knowledge someone could share on this would be awesome
@akaLuptonPittman
Жыл бұрын
Aligned asymmetric 👍… also, a straight line marked down the entire outside of all baffles tightened to how they’ll be, will give a decent reference for clips
Where do you buy the baffles?
Most of these links have been removed from youtube and amazon, what caliber was this for as I am trying to follow it for a 22lr can but don't want to order parts until I am sure. thanks!
@garystuckogh7861
3 жыл бұрын
here you go www.xrttactical.com/
Any estimate on how durable it will be? Can anyone with a good garage make that or does one need a special license?
@garystuckogh7861
4 жыл бұрын
Its stainless steel so it will be very durable. Its whats used by the big pro companies.
@ThePatriotParadox
Жыл бұрын
@@garystuckogh7861Will aluminum work? I can't find stainless anymore because all the unconstitutional bullshit!t...
Damn! Mine warnt squre! Kiddiing.
Where are the links for the end mills?
Quite expensive baffles. Really nice work thou!!
@garystuckogh7861
5 жыл бұрын
I have looked for cheaper ones, but the closest I found was aluminum ones for around the same price.. SS is so much better.
@ifell3
5 жыл бұрын
@@garystuckogh7861 can't remember what other videos have used, maybe something to do with oil filter or something but they brought the baffles loose!! Edit, ak custom, used a fuel filter.
@garystuckogh7861
5 жыл бұрын
OIl filters are crap
@ifell3
5 жыл бұрын
@@garystuckogh7861 I did just edit it, have a look, it's almost a suppressor out of the box, not like your movie oil filter aha
@garystuckogh7861
5 жыл бұрын
Sorry dude but you make no sense at all. You got some very poor english man.
Nice job! Where did you buy the baffles to begin with?
@garystuckogh7861
5 жыл бұрын
Seriously bro? Its in the video text and in the video description. Same as my other videos lol people asking where I got the parts. Read the info in video description lol.
@salessi9495
2 жыл бұрын
@@garystuckogh7861 It's not there..
@BackFire10mm
6 ай бұрын
I guess you have to buy some place, but he aint saying, and he aint talking either...lol
What size drill bit would you recommend for making these clips on a .30 cal ?
@TheSchumijr
3 жыл бұрын
3/8”
How well did that clip design work? And what cal do you use with it? nice video too!
your amazon link for the main tube dos not work
@garystuckogh7861
3 жыл бұрын
Here you go www.xrttactical.com/
What the purpose result of the vent?
@garystuckogh7861
5 жыл бұрын
It makes for better suppression than straight unclipped cone baffles
I am assuming these are aluminum? What about stainless or Ti baffles? It's not so easy using a drill press. Wondering if you have any insight on working with stainless or Ti?
Where's Rusty these days?
You are kidding. Where You lost the precision?
You really shouldn't be wearing gloves while operating a drill press. It's not pretty when the glove gets caught in the bit.
0
I enjoyed that stupid background music way too much.
As a person who has inside knowledge of making an illegal item....this is good info if u know the other steps...like i do
@mikecollins4298
5 жыл бұрын
Drill 2 holes on both sides of each cup 4 ventilation. If not it will explode in ur face😰🙏
@moeynola6747
5 жыл бұрын
What's illegal about this?..this is informative for people who want to build there own suppressors on form 1 instead of buying practically the same thing from some name brand company for $800-$1000
@jfpinkston1
5 жыл бұрын
Mike Collins What makes you think this is illegal?
@garystuckogh7861
5 жыл бұрын
This is not illegal at all bro! It is regulated, but not illegal
@garystuckogh7861
5 жыл бұрын
uuhhhh.... no. Looks like you need some more knowledge in this stuff if your saying that
Incredibly unsafe use of the table saw. Holy crap. Read a book.
Would have watched the video but the music sucks and was really not needed. Thumbs Down
@clintmullins8670
3 жыл бұрын
That was a joke right?