HOW TO MAKE BUBBLE CANDLES USING SOY WAX | KERASOY 4120

Тәжірибелік нұсқаулар және стиль

I tried making the bubble candle with the Kerasoy Soy Wax and Rapeseed wax!
Supplies from - www.livemoor.co.uk - USE CODE KIMA10 for 10% off!
Worldwide shipping 🌏📦 Please check their T&C's
00:32 - What Livemoor sent me
2:23 - Let's get started!
5:38 - Melting the wax
9:21 - Adjusting the wick
9:58 - The Unmolding
------------------------------
Method:
170g-180g of wax
Heat the wax to 80°C
Add fragrance at 65°C - 70°C
Pour at 65°C
Leave for AT LEAST 2 hours before unmolding
Equipment:
Kerasoy Pillar wax 4120 - bit.ly/3EO4NMK
Rapeseed Wax 9562 - bit.ly/3oa8zt6
Waxed tabbed ECO wicks - size 2
Bubble Mold/Mould - 🇺🇸 amzn.to/3mTMxvk 🇬🇧 amzn.to/3D0mtEi
ECO wick calculator - bit.ly/2Yp90Hj
Wick Guide - bit.ly/3mTMqQq
Tips : Temperature doesn't have to be EXACT when it comes to heating. If you are having difficulties reaching certain points, you can be a few degrees off. - just keep a close eye on the cooling temp!
I've created a vibely account where we can all discuss everything candle related! Join me - join.vibely.io/xFTIjJ5eplb 💛
OTHER VIDEOS ⬇️
Which Wicks I Use For My Soy Wax Candles - • Which Wicks I Use For ...
Which wax to use for decor candles + wax melts - • Which wax to use for d...
CANDLE FROSTING | Tips on how to avoid ❌ - • CANDLE FROSTING | Tips...
#bubblecandle #soycandles #kerasoywax

Пікірлер: 37

  • @onyaeonyae7
    @onyaeonyae72 ай бұрын

    I just came across your page for needing to sharpen my décor candles and you've been such a help. Thank you for taking the time

  • @olesya8737
    @olesya87372 жыл бұрын

    The most informative video I've ever watched about making a bubble candle. Thank you so much!

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    I'm so glad it was helpful for you! Thanks so much for watching 💛

  • @carmelavicaria7129
    @carmelavicaria7129 Жыл бұрын

    Brilliant tutorial thank you so much for sharing, I have just started making candles myself ❤

  • @KIMALONDON
    @KIMALONDON2 жыл бұрын

    I used Kerasoy 4120 wax in this video not 4130 which I meant to say is a container wax! I will go over in the next video how usually rapeseed wax turned out 👀 Thanks for watching! 💛🕯

  • @MadeInBelize
    @MadeInBelize2 жыл бұрын

    Great Job. I like how honest you are. 3:45 I use my stick thermometer to make the hole in my moulds, then push the needle and or wick through. Pretty easy, you should try that.

  • @aquaticassistantt9581
    @aquaticassistantt95812 жыл бұрын

    I really appreciate you making this video!! It is super helpful

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    Thanks soooo much for watching!

  • @tanyamack1481
    @tanyamack1481 Жыл бұрын

    Thank you for this video. I am trying bubble candles for the first time so this helped. And by the way, you are gorgeout!

  • @blushbaby6898x
    @blushbaby6898x2 жыл бұрын

    Amazing to see you again!! I hope you are well xx

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    Hey lovely!!! Good to be back! Aww I hope you are all well too! 💛

  • @remathe-beloved
    @remathe-beloved Жыл бұрын

    Thank you so much for how detailed and straight to the point you make your videos. New subscriber here😊 can I ask why you let it reach 80 degrees and then let it cool to 6something?

  • @whoareu9683
    @whoareu96832 жыл бұрын

    Heeey, love all the infos in your video. Curious though: did the wick eco2 turn out nicely? Aka the burn time was nice?

  • @Checaruiz
    @Checaruiz4 ай бұрын

    Important tip 🤦🏻‍♀️ in order to be more efficient on time-work, use a microwave and set it for 3 min., if it’s not completely melted set it again for 1:30 more! Hugs and I hope this works for you as well.

  • @Cee_Cee8
    @Cee_Cee82 жыл бұрын

    Great video just wondering if you have ever burned a bubble candle I tried to make it but every time I've tried the candle as the candle is burning it drip all over my candle plate. is it meant to do this? id rather it just tunnel down than seep out. any advise you could give would be great. my bubble candle has a 5 inch diameter and I've used tcr 24/14, tcr 21/12 gonna try an eco 0.5 and eco 1 tomorrow. I'm determined to make one for my mum for mother's day hunting running out of time 😬

  • @roseg6703
    @roseg67032 жыл бұрын

    Good trick for stableising tricky candle mould shapes is put it a bowl of sand set it with some sand packed around the mould good to go.

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    Great tip! Or even rice? 👀

  • @tayoajanaku9
    @tayoajanaku9 Жыл бұрын

    Hey Ik this is an old video but how do you get your bottoms to be flat? Mine ALWAYS sink in, I’ve tried heating from a lower temp and also heating my mold too but it still sinks, no matter the mold, the candle sinks.. any tips? Cause yours looks amazing

  • @sams.k.y3920
    @sams.k.y39202 жыл бұрын

    what is the best degree to pour soy wax and how many minutes we have to wait so we can add the fregrance????

  • @aliciamarie3384
    @aliciamarie3384 Жыл бұрын

    What wick do you use for the 4120? If you don't mind me asking

  • @Arigni_Handmade_Products
    @Arigni_Handmade_Products7 ай бұрын

    I did this. But i got some rough surface. Is there any oil to apply in the mould? Pls tel me..

  • @sams.k.y3920
    @sams.k.y39202 жыл бұрын

    is the soy wax bearable to stand or it gonna melt by itself and it is better to pour soy wax into glasses or containers

  • @meekdevaserenitycandles9309
    @meekdevaserenitycandles93092 жыл бұрын

    Those bubble candles came out perfect. What do you put them on to burn them safely?

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    Sometimes a glass plate, sometimes a mirrored plate!

  • @delilapipoly
    @delilapipoly2 жыл бұрын

    🔔😍😍

  • @meysak
    @meysak2 жыл бұрын

    My bubble candles never seem to set on the top properly (so bottom of the mould) I’ve tried leaving it to set longer and I’m making sure I pour at the right temperature, tried putting the mould flat on the bench and ontop of something with the same problem. I’ve not had a problem with any other mould shapes wondering if you have any tips to stop this happening!

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    Thats so weird! Never heard of this! Does it set at the bottom (top)? If you have pics, please show! (Facebook, vibely or IG) xx

  • @AnkitaDas-ui7vh
    @AnkitaDas-ui7vh2 жыл бұрын

    You're so cute ❤🥺 I can feel you. Wish you luck Love from India

  • @KIMALONDON

    @KIMALONDON

    2 жыл бұрын

    Aw thank you Ankita! 💛

  • @kiarahenry3198
    @kiarahenry3198 Жыл бұрын

    Can i just use just Kerax KeraSoy Pillar Flakes 4120 without mixing any other wax??

  • @KIMALONDON

    @KIMALONDON

    Жыл бұрын

    Yes!

  • @andreeaflonta1096
    @andreeaflonta10962 жыл бұрын

    Hello, I really need your help! I have kerasoy 4130 pillar, I bought it because I saw you working with is. Is it me or it's not good? All of my candles are breaking. It's so frustrating. Please help me. I'm sad cuz I bought 20 kg, and it's not working for me...

  • @chrisellis8045

    @chrisellis8045

    Жыл бұрын

    4130 isn’t pillar wax lol

  • @nopasanada2613
    @nopasanada26132 жыл бұрын

    good girl

  • @stonecandles8665
    @stonecandles866511 ай бұрын

    Great video! We offer coconut wax candles and supplies. Check us out!

  • @raniaranoucha4193
    @raniaranoucha4193 Жыл бұрын

    Lady ... you're so cute and lovely ... watching u from Algeria 🇩🇿

  • @majofalconite4537
    @majofalconite4537 Жыл бұрын

    Thank you sooo much, this is the most informative video the I've seen/watched. Its worth the watch also 😇😇😇 #newsubscriberhere 😊😊😊

Келесі