Great video, this seems like a really good option. Do you know where the actuator is located on a 2022 M340i? Thanks in advance!

Thanks for the tip. I can confirm that on 550i F10 from 2010 this worked just like described: Connecting both hoses to t-shaped pipe connector. Now the valve is remains open.

@JJBanuelos

Жыл бұрын

Awesome good to know. Thanks for letting us know.

@livingthelifecollection

10 ай бұрын

I have the Same car , love it 💯

Hi looks a good hack. Getting a new 2024 X5 50e shortly and would this hack also enhance the sound and where would the hoses be. Thanks

Hi We’re I find the actuator for a X5 ‘23 and we’re to find the white small tube you use on the video to connect the two tubes Thanks for your help

I need help, awesome video by the way! I have 2019 M850i, where would my hose be located? Same place as yours. Thanks in advance 💯

Thanks for this video Tuo ting they are work for I4 X5 2022

Hello sir thank you very much for your video regarding the exhaust pipe that BMW 740! . I have a BMW 2019 740i I’ve bought it seen August but 2 weeks ago I found out that one of my exhaust pipe no smoke was coming out of it , I was worried about that, I call the dealer where I’ve bought my car and I describe what I’ve noticed about 2 weeks now . The told me that my car was not supposed to do that unless I’m on the highway and the actuator will open . I was worried and I said I just don’t believe it . I went on KZread I saw your video I went back to my car and looked at through the exhaust pipe then I saw the actuator . Now I have no worries anymore. Thank very much for your video. It’s really helpful 👍🏻👍🏻👍🏻👍🏻👍🏻

@JJBanuelos

2 жыл бұрын

Awesome glad this helped!

2015 75li should be in the same location ? and would it be better to get the wireless fob one?

Hello man. how it work on prius With changing Exhaust FUll system?

I have a 2014 550 xi it’s too quiet and I want to drill a few holes on the muffler till I get a muffler delete should I do it ?

can you explain why adding that t keeps the valves not just open but fully open?

2021 BMW X5 40I. Does it have a valve? Thanks

2017 540i x-drive. Where to find it? Thank you!

Would you know where to find it on a 2023 540?

2016 BMW X1 would it be located same area

2014 535i will this work? Thanks

Hi we‘rr i find the actuator for a x6m 2018?

Would this work on a 2014 428i

I have a 2014 bmw x6 xdrive35i would like to know where my is located

Would it work on a 2022 x6 40I

Thanks for the information and video. I have a 2014 640i. Could you let me know what I need to do for my car to get the sound we "need"!!

@JJBanuelos

Жыл бұрын

Your car definitely has the correct valve for this to work. Not to sure where it’s located on your model. Do a little research & if no luck let me know & I’ll see what I can find.

I have bmw 740 li 2008 model Is it poss in that car

I have a 2011 x5 50i am I able to do this mod bossman

Can this be done with a bmw x5. 2015

Hey buddy have you thought of installing an exhaust System on your highlander? If not do you know of one that can be bolt on? Thank you.

@JJBanuelos

2 жыл бұрын

Not on a Highlander, it’s a V6 they just wouldn’t sound good. It would make it sound like those annoying Honda’s with those big mufflers.

Does it work for an bmw 220i from 2021?

I have a 2010 bmw x1 e84, where is my actuator located?

Is it the same for the 23 X3?

I have a 2021 X6 m50i how do I make it loader

Where can I buy the piece?

WHere is this actuator for a 2019 xi ??

Location on the 2018 bmw x1 ?!?

Can I do this with e92 M3?

I have a 2013 BMW X6 35i where is mine? Thanks

Where's the vacuum pump on the 2018bnw x1 ?

Heyy! Is this process possible for a 2020 228i bmw gran coupe? I checked in the trunk and it was quite difficult to find. I might not have it, idk?

@purpleguy6973

Жыл бұрын

u have it

Firstly thank you for this helpful video and I’ve just tried it on my 2010 750Li. The drive is much better now, however my exhaust sound hasn’t changed much and don’t have any of that nice bang sound. Any suggestions?

@JJBanuelos

2 жыл бұрын

My suggestion would be to eliminate some of the cars resonators it has. That really cuts down the noise you want.

@Gino20202

2 жыл бұрын

The drive is much better “now” but the exhaust sound hasn’t changed?… 😂 This doesn’t improve the way your car drives, it changes the exhaust note. 🙄

@HARDMAN999

Жыл бұрын

This mod permanently closes the exhaust valve. The controller allows an Vaccum leak at certain RPM to operate the valved system. In order to work leave the Source Vaccum line on the bottom and remove the Left Vaccum like line that runs straight to the Vavle the atmospheric pressure holds it open. No engine light. Simply

Where is the actuator on a 2015 BMW 650 I grand Coupe X Drive

Hi I have a 2022 430i. What diameter/measurement barb fitting do I need?

@karthikkakumanu6569

Жыл бұрын

Did you find it?

Hey can you tell me where and vacuum line on a 2011 BMW X5 35ixdrive?

@JJBanuelos

Жыл бұрын

I’ll check tomorrow & find out for you

hey man great video ! i have a 2003 325i would this work for me?

@Braglemaster123

2 жыл бұрын

No

@HARDMAN999

Жыл бұрын

Hey mate, Have you looked at your exhaust to see if it has a Valve on the backbox/exhaust tips?

Hi, would this work for a 2022 x5? Thanks!

@camachofrank9968

Жыл бұрын

No, this will not. I have 2021 X5, and ours have a electronic actuator system.

I have a question I have a 2013 bmw 640i m sport Grand coupe does my ride even have value flaps I want a more aggressive sound HELP!!!!

@JJBanuelos

2 жыл бұрын

What engine size do you have?

I’m truly asking for help been trying to figure out where it is on my 2014 428i but can’t find it please help. All I want is more sound.

@JJBanuelos

Жыл бұрын

Unfortunately this only works on the BMWs with the vacuum controlled valve your cars has a electronic controlled one.

hi buddy how r u , i have a x5m 2013 e70 engine 4.4 bi turbo motor S63 my sound is little , helpme! please

@JJBanuelos

Жыл бұрын

Will do I’ll find out this weekend how you can get some great sound out of it.

Will this work on a 2013 750i xdrive?

@JJBanuelos

2 ай бұрын

Totally

Hey I have a 2011 750 f02 quick question did you notice a difference with driving experience related to back pressure? Correct me if I’m wrong but I thought those Vaccum lines work alongside the turbo wastegate? Any lag or loss of torque due to back pressure?

@HARDMAN999

Жыл бұрын

Well all this mod is doing is permanently closing the valve. I tried it, Easy way to verify is look down the exhaust tip. This runs a direct vacuum source straight to the valve. (Not ideal). Just remove the left Vaccum line to the controller and it actually works!

Hi, could you help me locate my vacuum hose? I have a 2013 X5 xdrive35i (N55 engine).

@Exatic

Жыл бұрын

Did you figure it out?

@blazingcipher

Жыл бұрын

I have a 2012 bmw x5 xdrive 35i

@user-ye9tr9wd1b

10 ай бұрын

hello how can i find the vacum line in x5m 2021 legit

I have a 2014 4 series 428i where is mine?

does the car need to be on or off when doing this? thank you

@JJBanuelos

2 ай бұрын

Preferably off to not cause any vacuum faults

Is this possible on 750 li 2006? And how can I get that bypass

@HARDMAN999

Жыл бұрын

Read my most recent comment because it's actually alot simpler than this!

2022 X7 M50i

I know how it feels to be desperate for attention. I've tried everything, too. Recently scored a cherry Toyota Corolla - 2003. Straight-piped and totally pimped it. The babes have taken note. And, quite a few dudes. Hoping to sew some wild oats. I'll keep the community posted on any success.

I Have a BWM X5 2014

Will this work on a 2020 X7 40i?

@JJBanuelos

Жыл бұрын

You know I’m not sure I’ll have to double check for you

Will this work on 2011 BMW X3

@JJBanuelos

Жыл бұрын

Pretty sure it will, I can look it up for you

It’s possible on 420i Engine N20??

@HARDMAN999

Жыл бұрын

Firstly check the boot or (truck) Secondly I've commented this before but anyway. I tested this and immediately realised this just permanently closes the valve... Constant vacuum to the valve In order to work just remove the side vacuum line to the controller and leave the bottom one.

Its posible for 540i 2018?

@JJBanuelos

2 жыл бұрын

Possibly if it has this same setup which it might

Does this work on a 650i

@HARDMAN999

Жыл бұрын

Check the back of the car and look for a valve and read my most recent comment because it's simpler to do than this. This will actually permanently shut the valve doing it this way.

I don’t see valves. That means I can’t do it at all?

I have a 2013 BMW X1 with twin turbo. Is this possible for my car???

@JJBanuelos

2 жыл бұрын

Should be the same setup.

@Dasha-hv3zu

2 жыл бұрын

@@JJBanuelos thank you so much

@benspaintshack5847

Жыл бұрын

@@Dasha-hv3zu did you do this on your car? If so what were the results? I have the same car and am thinking about doing it

Hey I have BMW X5 2004 3.oi

Will this work on 2017 x4 m40i

@JJBanuelos

Жыл бұрын

If it has this similar setup then yes it should work the same way

@4flats4u

Жыл бұрын

@@JJBanuelos I looked in the trunk driver side and the only thing that is there is the stereo amp

What are these small barb things exactly called?

@JJBanuelos

2 жыл бұрын

Vacuum tubing connectors. Automotive based

@carlo344

2 жыл бұрын

@@JJBanuelos thanks mate and the diameter?

@HARDMAN999

Жыл бұрын

OK so... I've commented this before but people need to realise this won't work. I tested this and immediately realised this just permanently closes the valve... Constant vacuum to the valve In order to work just remove the side vacuum line to the controller and leave the bottom one.

Hello, I have a '12 f02 with the mufflers chopped. I want it a little bit louder without being super loud (i.e charger scat pack). Would this do the trick?

@jcoach3064

Жыл бұрын

No 😲 go to a local muffler shop have them do a resonator delete and weld a 3inch pipe all the way back with some nice tips bammm mine sounds like a 🐉🐲 dragon

@jcoach3064

Жыл бұрын

Only cost me 160$ for the delete and pipe and 97 for tips I got nice dual burnt tips welded on

@MrHustleSwag

Жыл бұрын

@@jcoach3064 can you post a video? I have a f01 13 B7 and can’t decide what to do

@jcoach3064

Жыл бұрын

@@MrHustleSwag go CATLESS HEADERS AND resonator and muffler delete and put in a vibrant resonator and dual tips then get a ECU tune from revmatch motorsports stage 2 tune 💯💪💪💯🎇🎇🎇🎇🎇💯💯💯💯💯💯🎇🎇🎇🎇🎇🎇 you wont regret it brotha !!!!!

@jcoach3064

Жыл бұрын

@@MrHustleSwag so im currently building a super sleeper E39 530i 01' next is coilovers and then a m50 manifold swap then a supercharger kit but just go to my channel got some clips of the exhaust sound from when I fist got the car and put catless headers in and complete straight piped then when i put in the vibrant resonator youll then the stage 2 tune

BNW???

Will this work on a 2007 bmw 328i?

@HARDMAN999

Жыл бұрын

OK so... I tested this and immediately realised this just permanently closes the valve... Constant vacuum to the valve In order to work just remove the side vacuum line to the controller and leave the bottom one.

@HARDMAN999

Жыл бұрын

I commented this on most posts. If you find my original comment and like it it'd be great for people in the future to find this information. Cheers

@AL-xk8mj

Жыл бұрын

@@HARDMAN999 Hi so do you have any pictures of where the vacuum line is.

@AL-xk8mj

Жыл бұрын

I don't think this will work on mine because I don"t think i have a valve in the muffler.

@HARDMAN999

Жыл бұрын

@@AL-xk8mj It's in the left side of my boot/truck for my 330i

Hello where would it be on a 2021 BMW X5 i40 XDrive?

@JJBanuelos

2 жыл бұрын

Not sure but if it has the same actuators on the muffler it should work the same way

Does it work on a 650i ???

@JJBanuelos

2 жыл бұрын

Should if it has the exhaust valves similar to these

@Braglemaster123

2 жыл бұрын

@@JJBanuelos 👍👍

@HARDMAN999

Жыл бұрын

Just want to inform you when I tried this I realised that it's just allowing permanent vaccum to the exhaust which actually fully closes the valve.

OK so... I tested this and immediately realised this just permanently closes the valve... Supplying constant vacuum to the valve. In order to work just remove the side vacuum line to the controller and leave the bottom one.

@rekairinger7700

Жыл бұрын

Hello, you removed the hose facing the side and capped it with something or left it? And kept the bottom one plugged into the controller?

@HARDMAN999

Жыл бұрын

@@rekairinger7700 Unplug the left one that runs directly to the valve there's no need to cap the line to the valve because the whole point is that atmospheric pressure is needed in the line to hold it open. The Bottom vacuum line comes directly from the source of the vacuum in the engine bay. Quick test is when you plug this one you can here the atmospheric pressure entering back in. So just leave this one connected.

@romansipko5700

Жыл бұрын

@@HARDMAN999 so leave bottom connected and the side one just hanging loose?

😁

Hi there I got a bmw X3

@madazcustomz1494

2 жыл бұрын

Could you please help me out

@JJBanuelos

2 жыл бұрын

What year?

That seemed like it did nothing 😂

I literally heard no difference 🤔

@evanhonberger3524

Ай бұрын

in person and in the car you will for sure hear a difference in depth

I have 2017 x4 m40i and can’t seem to locate the exhaust vac hose to do this mod any help is greatly appreciated

@HARDMAN999

Жыл бұрын

Most BMWs have this controller but you should read my comment. I tried this and instead of bridging the two vacuum line. All you you need to do remove the left Vaccum line on the controller that is directly connected to the valve. So the atmospheric pressure overcomes the dome pressure in the actuator that controllers the valve. No engine lights super. Simple to try! This video was just a waste of time.

Will this work on a 2013 320i?

@JJBanuelos

2 жыл бұрын

Possibly not sure on the setup on those

@HARDMAN999

Жыл бұрын

OK so... I've commented this before. I tested this and immediately realised this just permanently closes the valve... Constant vacuum to the valve In order to work just remove the side vacuum line to the controller and leave the bottom one.