clean camera work and editing as always. Sounds better than I thought it would

@genehunsinger3981

Жыл бұрын

which isnt say'n much-right?LOL

Hey this was very helpful thanks. I really appreciate how in depth you go into describing each part and it’s functionality.

@JDCarsChannel

4 жыл бұрын

Thanks! I’m glad you appreciate my video!

They call it rice when u put cosmetic enhancements with no performance gains on a Japanese car. So an m style bumper n no performance parts on a German car should b called sauerkraut.

@chazzftw9313

4 жыл бұрын

Bipolar Beast yeah I agree however I do respect that he’s kept the 335i badge on the back. so it’s not toooo bad

@tobyoliver9841

4 жыл бұрын

RICE = Race Inspired Cosmetic Enhancements

@hoodiedrifts3994

4 жыл бұрын

No it’s rice when you try to pretend it’s a M4 or M3

@erikhoskinson1293

4 жыл бұрын

Bipolar Beast but less resistance of exhaust gasses adds a little more power not an insanely noticeable amount but the engine notices

@devon9552

4 жыл бұрын

It’s rice when you install a fart can and throw a wing on it😂

Good job, but I recommend using a ‘tap-a-fuse’ socket to tap positive 12v. It’s just safer and won’t cause bad connections or plastic to melt in case something goes wrong and cause a fire.

@moorepower13

4 жыл бұрын

That and I would have used a switched fuse not constant, that way your battery isn't getting drained by the wireless receiver.

@aldorodriguez1674

3 жыл бұрын

You recommend a specific tap a fuse? Could not find one that handles a 20a fuse.

@aldorodriguez1674

3 жыл бұрын

Michael Moore hooked mine up to the rear accessory socket which turns off 15 min after the car locks.

@angelcalderon7845

3 жыл бұрын

Like tap-a-Tio

@joeponder9668

2 жыл бұрын

I was thinking the same! The video is pretty decent for folks just trying to do the damn thing but brother that fuse, STOP IT!!! 😂

Definitely the route I want to go on my charger r/t. It’s loud all the time but I’d like to be able to go stealth mode at times. This with a quieter yet still free flowing exhaust after the cut out should give me the best of both worlds. Nice job on the installation by the way.

Exhaust setup sounds amazing! Sounds like you got a burble tune 😌

Hey dude look into fuse taps they are much safer than what you did. Also look for better grommet or seal up that hole. It was there for a reason especially right by your fuse box

Bro, PLEASE get your hood emblems and fender vent inserts....soon. My OCD is going crazy. 😂👍🏾

@soupyconch9870

4 жыл бұрын

did your ocd miss the exhaust tip on the left O_O

How to be sneaky in California

That is one of the best car Installation Videos I have ever seen

Mum and Dads house looks sweet.

@Brancalbin

3 жыл бұрын

Your telling me you wouldn't want that set up, at that age ?

@maccmike8

3 жыл бұрын

@@Brancalbin It's you're and wtf are you on about?

WOW, this is a great DIY, good video too. Nice job!!!

I’ve basically done the same thing with a vacuum controlled cut out but I basically went around the muffler and back into the original piping

@samwayne9000

2 жыл бұрын

Could your valve handle the pressure? Any rattle?

Love the water tight connector

has it rained since you did this? If so, there goes your car when water gets in your fusebox. Should have put silicone to fill up the hole you made in the grommet.

@agristandardagriculturalph277

4 жыл бұрын

mrphotomanTIM or just slitted the gromet so that it was tight to the cable but allowed the plug to pass thru

@Cherry-yh6tv

4 жыл бұрын

exactly, the hole should be smaller so the cable is snug and then a little filler

@crescenciojohnmichaelp.8008

4 жыл бұрын

I agree with you bro.

@Michaeltje89

4 жыл бұрын

Just rinse the undersite ones and you blow it right on the fuse box. And believe me, electric problems are the best..

@crescenciojohnmichaelp.8008

4 жыл бұрын

@@Michaeltje89 Yep the best. hehehehe

Sounds nice would love to have it on my 630i too 😎 greetings from Germany

Sounds great!! And great editing btw

@JDCarsChannel

Жыл бұрын

Thanks! I'm glad you enjoyed!

Nice install video. I hope to do this soon when I get another fast car lol

bro this is sick! congrats and keep up the great work! tempted to do one on my m140 now!!!!

@JDCarsChannel

4 жыл бұрын

Thanks Will! I’m sure your m140 would sound pretty sweet!

spill the tea on those exhaust tips

qtp electric exhaust cutout rất tuyệt ,âm thanh tiếng pô quá chất ,cảm ơn bạn hướng dẫn và chia sẻ

Excellent job man!!!

@JDCarsChannel

3 жыл бұрын

Thanks brotha!

Great video man!! 10/10

@JDCarsChannel

2 жыл бұрын

Much apprecaited!

Great job JD. I might do this mod down the line. Wanted to make my F30 a bit louder but the wife and kids will hate me then...but , now I can do this and activate it when they’re not riding with me😜 Awesome work! And don’t listen to these haters who find any stupid shit to nitpick. I don’t see them taking the time to produce videos! Strong work!! I’m sure you found the time to plug that hole with some black silicone!!

@JDCarsChannel

4 жыл бұрын

Thanks Wilton! I’m happy with how it came out and definitely recommend these cutouts. I do need to add some silicone to that hole. Thanks for reminding me!

Really nice video mate hood job 👍

@onpole01

11 ай бұрын

Good job 👏

That 12V constant live will eventually drain your battery, also killing it's health overtime. Get a fuse blade "add a fuse" adapter, then plug it into fuse 143 (rear fusebox) as this is a switched live, it'll only go live when you turn on the ignition saving your battery. I only know this because I did the exact same, the controller box constantly draining the battery wrecked mine after 12 months.

Nothing can beat the amg sound

Sounds awesome bro

Sounds great, you just earned another sub!!👍🏻 Many years ago I had a 1986.5 Supra (before the Turbo model came out) I put a simple Flomaster exhaust muffler on it and it sounded great! Guys in 5.0 L Mustangs would give me a 👍🏻 for the sound.

@JDCarsChannel

4 жыл бұрын

Hahaha that’s a sweet ride! I bet it sounded crispy!

@troy9er

4 жыл бұрын

Yea it was a Cheep Mod that sounded like it cost a bunch of bucks!!

Nice work sounds great

@JDCarsChannel

3 жыл бұрын

Thanks man!

Omg your welding is ... I Can not describe how bad it is. But nice project you have 9/10 point's on that.😂😂

The quality of your videos is insane

@JDCarsChannel

3 жыл бұрын

Thank you! I’m glad you enjoy the vids. I’m always trying to improve

I have just fitte d a pair of valves to the back of my Jag S Type R and what a difference! Proper V8 sound at the push of a button but still able to have a typical 'Jag' drive if i want

@JDCarsChannel

2 жыл бұрын

Very nice! Glad you can now unleash the V8!

33k SUBSCRIBERS??? This channel deserves more

@JDCarsChannel

4 жыл бұрын

Hahaha thank you!

I have a full aftermarket exhaust system, I'm considering getting a control valve for when I want the exhaust to be quiet, thanks for the video

Awsome video, thanks

Wow i love that sound

@JDCarsChannel

4 жыл бұрын

Me too!

Nice work👍🏼

Very nice and clean work. Love that sound.

Great sound

Did this to my 328i about a year ago and it was best decision for exhaust imo

@kieferloewen3879

4 жыл бұрын

Nicholas Eckert I’m thinking of doin it to mine, should I take the cats out too or or nah

@nickzombie3

4 жыл бұрын

Kiefer Loewen it’s more of a personal preference. You will not pass emissions so come time you’ll need to put your stock cat back in the car to pass. However if you don’t mind, removing the cat is the way to go. But you will need a tune to make actually power gains.

Awesome video!

@JDCarsChannel

3 жыл бұрын

Thank you! I'm glad you enjoyed it!

Always happy to support a fellow masshole with a 335i

@JDCarsChannel

4 жыл бұрын

Thanks brotha!!

Love it , i need it on my BMW GT =D

Personally I wouldn’t do this I would have just straightened it but I really like the out come 😋😍

Damn I need to invest in one of those step bits!

Sounds great

Damn man. U a legend.

@JDCarsChannel

2 жыл бұрын

Thanks beast!

Very well done 👌

The slightest change with the “straight pipes” but improvement is improvement

First time watching this channel.... Really straight foward and simple....keep up the good work!!

@JDCarsChannel

4 жыл бұрын

Thank you!

Awsome video..thanks for the info..only thing i thought could have been better was that gromet cutting..you should have cut the wire then made the smallest hole and then solder the wire back to have minimal water seepage..but thats just a gromet can be changed at any moment loo

Aye homie is from MA cheers bro

@JDCarsChannel

4 жыл бұрын

Yessir! Cheers

Hey just wondering if that second option you had with the full straight exhaust and into the muffler exhaust one works on a model 323ci Beamer. I’m trying to put one in mine where I will use clamps and have to cut off part of the exhaust to place it in. About 11 inches if I remember. But I was just wondering if that second option with right measurements would work on a different Beamer if you know. I’m very new with cars

I've got stage 2+ on my f30 335i, and the resonator delete and electric cutout is my next step before I go to pure stage 2 turbo upgrade. Thank you for doing this video!!!

Please fix the Alignment of the exhaust on the left side!! I really can’t stand it💔but love the video

@KurumaDesigns

4 жыл бұрын

The exhaust looks fine

@wristoww

4 жыл бұрын

Kuruma Designs no it doesn’t lol. The tips are very off

@Nor.videographer

4 жыл бұрын

Yeah Please fix itt :/

@TheGamingGeek01

4 жыл бұрын

I swear, I helped my neighbor put a custom Muffler on like this. It's not the tips, it's the individual pipes.... so many hours lost 😪.

@elebee4048

4 жыл бұрын

Left side exhaust is no aligned

That's it, im getting one of these.

Massachusetts gang 👍🏻

installation looks really clean! Tempting to do it on my car too lol. how does it affect acceleration?

Are u going to put the m performance kit on it ? Here in the uk I see m3/m4/m5 with the carbon fiber m performance kit on and they look sick. Also how much did this full kit cost

Won't it cause issues that you just cut a whole in a grommet that was water tight right underneath your fuse box?

@Ashley-dy7bx

5 жыл бұрын

I thought this, you could see the ground straight through. It's only a matter of time before water/moisture makes it's way in there.

@godfroid47

5 жыл бұрын

Rookie mistake right there. It’s plugged for a reason :)

@emirertas5430

4 жыл бұрын

you can obviously just tape around it with electric tape or put silicon around it

@tiggerci

4 жыл бұрын

Yep should of cut a small x into it...

@frankloef9760

3 жыл бұрын

Glad I am not the only one to notice . LOL.

lmao your car is always so dirty bro!! (but your vids are very professional btw)

Great video! I'd like to do this to my 750i but I'm concerned about MASS auto inspection. Any issues there? Nice mod!!

@JDCarsChannel

4 жыл бұрын

Thank you! I wouldn’t be too concerned - I’ve never been given a hard time about it. I don’t think they’ve even noticed it 😂

If your going to have the body kits on the car, you minus well debadge the car. It’ll make it look cleaner from the rear and just makes sense to me.. idk just my opinion (:

Your beads need a little work but you'll get there. Nice work bud.

Nice job!! I had my exhaust valve connected directly to the 12v battery. I noticed that my valve no longer opens and closes, so in the end I didn't know whether it burned out or it came from the heat from the valve, or just unlucky. do you have any ideas ??

@gen_smolskiy

2 жыл бұрын

Probably burned, could have been due to a short along the way from any number of things. What I usually do when adding electronic elements to my cars is fuse tapping. It’s relatively easy and it’s very safe

Sound sweet

Thinking about putting a diverter on my 94 Chevy s10

I see you bought the 3” pipes. Are pipes for the F30 328s and 335s the same?

Im From Massachusetts too 🤘🏼🤘🏼🤘🏼

@JDCarsChannel

4 жыл бұрын

Masshole gang!

@Error1M.

4 жыл бұрын

U already know

So I pretty much have the same set up on my 335. Stock exhaust but rez delete and the electric cutout but when it’s closed the stock valve in my muffler rattles like crazy! Do you know a fix for it or how I can get it to stop?

Any water get into that fuse panel ?

Sick btw

is the rough idle because of the valve? also how has it held up overtime

Great content. Earned a sub from me! Thinking of doing the same thing but to make my truck quieter on long trips. Eyeing a switch already

*opens valve and revs car* KZread subtitles: *music* KZread you are correct. Its music to my ears. Great job!

@JDCarsChannel

3 жыл бұрын

Hahahah thanks Dylan!

A thick intake and quick tune and that turbo whistle will he so nutty

@JDCarsChannel

4 жыл бұрын

Hahaha hell yeah! I can’t wait

Wow very nice. Is it both air pass tru valve cutout and muffler when valve is open? Thanks

@JDCarsChannel

Жыл бұрын

Thanks! Yes, it will pass through both when open

best sounding 6

So the best location to put a cutout is as close as possible before the muffler? For loudness

If you had drilled a hole in the grommet just big enough for the wire then slice the grommet from outside into the hole you could pop in over the wire w/o having that huge hole that might leak water into your trunk. If nothing else it will allow exhaust fumes from you cut-out into the trunk.

Should put a valve on the other side too. What would it sound like if you closed off the stock exhaust when you open up up the bypass.🤔...just an idea I had when I watched this. Sounds good though!

Super nice setup very well thought out

Love it I'm doing two

You should take some rubber cement and fill that hole around the wire in that grommet so there's no chance of moisture getting near your fuses and in your trunk.

Get mhd!!! Will feel a big increase in power and get louder burbles!

Is it really loud now? I’d like to install that on my 335is

Wouldn't it be maximum loudness closest to the manifold or header?

Do we think alike when accessing power for aftermarket accessories,...I do the same thing with power leads and fuses! LOL! Nice work!! Please say did you resealed the large hole you made in the Grommet,....personally, I think you should have done a "slit cut"! this way,..the grommet would still keep moisture out of the vehicle, etc.

@JDCarsChannel

4 жыл бұрын

I did reseal the hole. I was unable to make a slit cut because the grommet was a very rigid plastic.

I have an audi 2005 1.8 turbo and its quiet stock with the nice sound of the turbo whistle but I want to add something like that where I can have switch right by my stereo where I can add the same feature so that I can get that nice wild sound as well.

@daddyyjakee174

2 жыл бұрын

Blow out valve

Hey.... Your videos are so high in quality, I'm pretty late writing(2yrs later) but I'm willing to buy those cut out and it just says they're not available... So you know where could I find them?

@JDCarsChannel

2 жыл бұрын

Yes! We've updated the Amazon links and QTP also has them in stock.

hi , man i am from bulgaria and i have bmw e66 760 li individual . i like so much your video /qtpelectric exhautcutout/ please tell me where can i buy from thank you

Upstate ny here e46 m3 and 325xi touring where in mass brov, sounds throtty

better to make a small (wire size) hole in the grommet then slice it to the edge of the grommet, so it will seal around the wire instead of the huge hole you put in it.

Broooo u painted the welds and didn’t even wire brush the dingleberrys 🤦‍♂️🤦‍♂️

@JDCarsChannel

4 жыл бұрын

I did hit it with a wire brush... on my air die grinder

Best way to do the fuse instead of wrapping the wire get a fuse tap will have 2 fuses on it and crimp connectors to wire strait to 1 fuse for the added item and 1 fuse for the orginal item and you just crimp and then plug in

Im new to this channel but watching this video I see the background and it's stunning over there. Might i ask what state is this? This reminds me when i used to live in Coronado Island!

@robertarballo

3 жыл бұрын

Nvm i found out. Lol

Yo, what is up with all these negative ass comments? Literally the whole damn feed is nothing but shade. Good shit, man. Sounds awesome.

@JDCarsChannel

4 жыл бұрын

Hahaha thanks man!

i would have liked to see it more integrated into the exhaust. like straight pipe the rear and install a valve to one side. I find it weird to have it dump before the tips

About how wide apart are the two connectors on the remote system? I have an e550 with a biturbo setup and a true dual exhaust. Two mufflers right before each tip. Its split all the way up to the center of the car. Could you split the wire more, or probably some extending is needed?

@JDCarsChannel

Жыл бұрын

They should be far enough apart for you to hook a valve up to each pipe without needing to split/extend.