Great video mate. Very useful. Love from UK 🇬🇧

@RoboCircuits

Жыл бұрын

Glad you enjoyed it

That's really amazing👍👍🤩

@RoboCircuits

2 жыл бұрын

Thank u 😊

Really useful

@RoboCircuits

2 жыл бұрын

Thank you

Thank you so much

@RoboCircuits

2 жыл бұрын

You are welcome ❤️

Wonderful

@RoboCircuits

2 жыл бұрын

Thank u ❤️

hi, can i try this using a pc instead of a mobile phone

Please name all the components used along with their specifications

Question, can this small project help me repair video game consoles that do not output correct RGB video colors on CRT since it is an analog video signal. Some games or arcade boards when plugged in, they are damaged because some IC that are responsible to put out the correct video signals are not making ground contact with the PCB arcade board. The only way to know if this is happening is probing with an oscilloscope to see if video signal output of R, G or B and sync are being put out correctly. A normal oscilloscope provides me that function. But I am curious if that project of yours can tell a high or low analogue video signals of an IC chip or anywhere on the PCB board that range between 3-5 volts.

@RoboCircuits

2 жыл бұрын

Yes it will work. Make sure to buy the shield. Then you will be able to check output video feed to detect possible problem.

@DarkWolf80s

2 жыл бұрын

@@RoboCircuits oh wow! That is amazing! do you have links to where I can buy each individual items?

@RoboCircuits

2 жыл бұрын

I saved the link in description check it out

Nyc thumbnail

I really wanted to watch this video but I just can't handle the audio jumping from near mute to 11+. It goes down and I have to turn it all the way up, then next scene the audio jumps up and in and out so much that it rattles my windows and the neighbor screams because it hurts their ears

@RoboCircuits

Жыл бұрын

Will improve it in future videos. Thanks for constructive feedback

Great

@RoboCircuits

2 жыл бұрын

Thanks

How to increase the sampling frequency and increase the memory any alternate solutions suggested?

@RoboCircuits

2 жыл бұрын

Sampling frequency is limited due to arduino There are diy oscilloscopes

Can i use external source (AC)to measure frequency (as oscilloscope) or we have to use its internal power supply only...??

@RoboCircuits

2 жыл бұрын

Its not made for checking ac currents

@RoboCircuits

2 жыл бұрын

You need to check out prayogeek uno website for that

Nice

@nishantnishant208

2 жыл бұрын

T - Shirt kiski hai 😂😂😂

@RoboCircuits

2 жыл бұрын

Meri h t-shirt

How to get a high sampling rate like 5 msps?

@RoboCircuits

2 жыл бұрын

For that you need a professional DSO

can you find the rise and fall time of signal

@RoboCircuits

2 жыл бұрын

No … not using it

What's the app name

Hey, great video! Please, can you tell me if it's possible to use ESP 32 or Node MCU instead of Arduino? Thanks!

@RoboCircuits

2 жыл бұрын

No... Because creators gave support for Arduino only

@silviocorrea25

2 жыл бұрын

@@RoboCircuits Oh I see... that's ok, thank you!

@karljay7473

2 жыл бұрын

I built an oscilloscope using Arduino and you can use other controllers. I wanted to use other controllers because the Arduino isn't very fast and I wanted a faster sampling. I wanted faster sampling so that I could use data smoothing.

What is the highest frequency we can get?

@RoboCircuits

2 жыл бұрын

Specifications are mentioned on product oage

@gayatrigaikwad6735

4 ай бұрын

​@@RoboCircuits Sir where?

Can i use arduino uno normaly after did this

@RoboCircuits

2 жыл бұрын

Yes

Is programming 8051 necessary to download the program into the Arduino processor or not?

Thank you sir for uploading this vedio Sir can you please make a vedio on obstacles avoiding car using L298N motor driver.

@RoboCircuits

2 жыл бұрын

Sure

@subhradipacharjee878

2 жыл бұрын

@@RoboCircuits ok sir

app does not work

@RoboCircuits

2 жыл бұрын

Contact their support team for that

Useless without paying for a shield now, very sad

@RoboCircuits

2 жыл бұрын

Yeah… because arduino cannot handle negative voltage and signal more than 5v

@SuperNeotendo

2 жыл бұрын

@@RoboCircuits i got it working. First flashed the arduino with the desktop app, after that i was able to use it with the android app, without any shield. Helped me a little for my Commodore 64 repair

@SuperNeotendo

2 жыл бұрын

@@RoboCircuits more worst, arduino can not handle more than 800khz or so

Hindi me class korwao....sir

It's a nice gimmick. But with +/- 5 volts and a maximum of 20 kHz, this is not even close to being practical. Even when taking measurements on an Arduino, you are severely restricted. The DSO138 is a minimalistic oscilloscope for little money and can be used up to 50 V and around 150 kHz.

@RoboCircuits

2 жыл бұрын

Use prayogeek uno shield for that. it provides more options

@RoboCircuits

2 жыл бұрын

Its true nothing can.beat and oscilloscope

@wernerpeter9706

2 жыл бұрын

@@RoboCircuits I don't want to spoil your sponsored product. I just can't find a price on the website, the site's payment method has been deactivated and the specs I have mentioned come from this site. The additional options of the shield are weak and irrelevant without any information on accuracy or resilience. Of course, the DSO138 is not a precision instrument either. But from the specs as an oscilloscope usable at least to some extent. And the smartphone as an inexpensive software signal generator up to 20 kHz rounds off this. What is the price for this module?

Nice

@RoboCircuits

2 жыл бұрын

Thank You 💘