I have this exact same bike, but I’m wondering do I have to upgrade my Throttle and controller to a MX 500 or can I just keep my MX 350 Throttle and controller ?

@JordyBuilds

7 ай бұрын

The stock 24v stuff won’t handle the 36v as it’s a on/off throttle not variable. I have an over volt kit on my website for sale now in the description, check it out !

@TripleD-oj3hx

7 ай бұрын

@@JordyBuilds so do I have to use the kid off your website or can I just use the mx500 Throttle and controller ? I already have the controller and Throttle from a buddy of mines.

@JordyBuilds

7 ай бұрын

@@TripleD-oj3hxyou can use either! You will have have to do your own wiring! The kit is just plug and play for ease of use/convenience!

Great, simple process. I wish more videos were this way. Great job! I have my parts on order already!

@JordyBuilds

Жыл бұрын

I appreciate that a lot! Glad to help! Should have some new videos coming soon!

Me and my dad watched your videos and put our bike together to your videos it came out great!

@JordyBuilds

Жыл бұрын

I love this!

Thx so much I did it and it works great 👍

Great video! Yard looks good and that tree is awesome too!

@JordyBuilds

2 ай бұрын

Coming soon! Got sick and have been down and out! Thanks for your support

Great build!

@JordyBuilds

Ай бұрын

Thanks!

For your next upgrade, you should try to do a shunt bypass mod. It made a big difference with acceleration, on my mx500. And if you can get a controller from a mx500 or mx650. Those controllers can take 50v. One problem I did have, after the shunt bypass mod, was that one of the 30 amp fuses blew. So I replaced it with a 40 amp. I think your mx350 would go 25 maybe 30, with another battery.

Thank you so much this is sooooo helpfull

@JordyBuilds

Жыл бұрын

Glad to help !

I’ve got a custom MX350 cafe racer I’m working on and planning to do this. Thanks for the great video. I’ve posted on Facebook

@JordyBuilds

4 ай бұрын

Thanks for sharing!

@JordyBuilds

4 ай бұрын

I also sell my own set ups now as well !

Haven't used drill batteries yet. But I did wire in an extra 12v battery, cut just one motor lead. Have it on a switch, one way normal. The other setting the motor sees 12v with no throttle, throttle gives you the normal 24v.

@JordyBuilds

Жыл бұрын

There ya go!

@tylerdyer5879

Жыл бұрын

I'm trying to do the same thing. I got an identical 12 volt 7 amp battery out of a jumper box. Just added the third battery in series and then I got some quick connect stuff so I can charge the original two batteries with the original charger and use my AC/DC quick charger for the third battery. So after every charge I have to connect those wires back up into series. However after doing all that crap I'm just using stock 350 controller. I don't feel like I'm getting any more speed out of three batteries. It might even be running slower. Thought it might be a charging issue. I am definitely no electrical engineer. Are there any more details you can share with me about getting a stock mx350 to run on 36 volts with a third 12 volt battery. Or do I need to buy some upgraded electronics? Everything I try to do I try to do is cheaply or free as possible so you know... Lol

Hey mate great guide. Can you wire in a throttle limiter for when my younger son wants to ride it?

@JordyBuilds

Жыл бұрын

Yes you can it’s called a potentiometer!

You are the shit,.. Thank u for doing the video breakdown

@JordyBuilds

4 ай бұрын

Thanks boss ! I also sell plug and play kits now!

Recently bought one of your kits. It should arrive tomorrow. Cant wait. Did you have to cut the plastics to be able to access the new battery setup?

@JordyBuilds

4 ай бұрын

I don’t run the battery covers for Milwaukee batteries!

That looks so funny he’s got the lil bike on his make shift moto stand.KINDA OF CUTE LOL…😂

@JordyBuilds

Ай бұрын

Yep and look how many views the video has. This video led to me starting my own business and doing very well. Thanks for your cute input ! ☺️🤣

Can u Pls do a close up on the contriller and which wires you cut

@JordyBuilds

Жыл бұрын

Don’t have to cut any. Just need throttle, motor, battery

@Jordy Builds On my MX650 speed controller, the connect that brings power into the controller actually has 3 wires, 2 main (power and ground), and a third small red wire that is tapped into the main power. Any idea if that small red wire is required and what it does? I wasn't able to find a diagram that explained why it was there

@JordyBuilds

10 ай бұрын

If you look up mx500 controller wiring diagram it should come up on google images. It’s more than likely the wire for charging stock batteries

You could probably just use some 24V Kobalt batteries. I think Craftsman had some of those, too. They didn't make a lot of items that took them, so they're more rare than Kobalt.

@hazadus2u

11 ай бұрын

I think the point is to use the batteries you have instead of buying new ones

@JordyBuilds

11 ай бұрын

That may make for 48v

Hey Jordy just picked up a what i believe to be a mx350 from 2010. (V22) is your tool battery/controller mod compatible with it? Also, do you have a video showing how you mount the Ryobi set up?

@JordyBuilds

4 ай бұрын

I’m about to do a video on installing a full kit I sell on a mx350, I just did one with a 40v ryobi battery adapter and the 36v controller with throttle & volt meter/key switch set up! If you shoot me a message on my facebook I can send you some videos today! It’s Jordy builds , also linked in description of my new video.

Hey so I wired mine just like yours in video and I just get a clicking when cracking throttle everything stock on bike also it worked with stock battery’s

@JordyBuilds

Жыл бұрын

It needs to be a Mx500/Sx500 controller and throttle. If you already have that, sounds like it maybe a dead battery.

I have the mx650 . Can I put 3 18volt batteries on series without blowing the motor up? I saw a guy making it a 72 volt, but had to upgrade controller, and motor.

@JordyBuilds

Жыл бұрын

You should be able to but it might blow the controller up eventually

Hello, I'm building an occ chopper bicycle with an mx350 motor with controller. I have 2x( 20v, 3.9 ah) batteries. Amazon has adapters with/without fuses. Idk if the batteries are enough, or which adapter to buy? I read that some batteries and motors permenatley died trying this please help.

@JordyBuilds

Жыл бұрын

I never had a fuse on mine but you can just put a fuse for what your controller is rated for. Example: 30a max current controller so run a 30/35amp fuse

If I want to switch my mx350 from 24v lead to a 24v lithium battery do i need a new throtle and controller and if so will the one you have on your shop work for 24v lithium?

@JordyBuilds

4 ай бұрын

No you will not, it’ll work! However it may be in your best interest to go 36v and get a potentiometer(top speed adjuster on my website) that way you can turn down power and slowly turn it up as they are ready for more power rather than have to buy a whole new battery

Quick couple of questions. Are you able to wire four 18v batteries totaling 72V if I upgrade the other components? And will the batteries add up to 72v and drain equally?

@JordyBuilds

8 ай бұрын

Your have very low amp output for 72v and that’s really stressing the batteries but it’s been done. 18x4=72v and they should drain evenly if they are all same charge and capacity(ah)

Do you need to install low voltage cutoff switch to prevent battery from over discharging?

@JordyBuilds

4 ай бұрын

I pull batteries at 1 bar. I’ve ran em dead before and not had issues but it’s not recommended

We did this upgrade and my daughter burned the motor 😅. We ordered the mx500 motor and now we gotta build a bracket to mount it on the bike. Will I have to change the chain or add links? If you have any advice I will gladly take it.

@JordyBuilds

Жыл бұрын

I would order an extra chain with a master link just in case with a chain breaker but it shouldn’t be too difficult! If you need help let me know

So I can do everything you did on the mx500 or 650 ? Is this setup ideal for them aswell ? Thanks man , good vid to

@JordyBuilds

Жыл бұрын

Yes. Although a mx500 weighs significantly more so you won’t have as high top speed or as long of range

@chiefkokey

Жыл бұрын

@@JordyBuilds any suggestions on what I can do for run time / ideal build ? It’s to start my 7 year old on , appreciate the info

@JordyBuilds

Жыл бұрын

I’d try to snag a mx350 to start with, if not there’s more options to see on KZread or in “modified razors” Facebook group!

With this setup are the Milwaukee batteries protected from being over drained?

@JordyBuilds

2 жыл бұрын

Not particularly but I just stop running it when it’s 1/4 dots or just when I notice a decrease in power!

Stupid question but how bad would it be to hook up 36v to the factory controller on the 350?

@JordyBuilds

2 жыл бұрын

I believe any razor controller can handle being over volted 12volts and work fine for a bit but it’s not 100% ideal

@isaacroberts7722

2 жыл бұрын

@@JordyBuilds thanks. I don't really care about the system. If it burns up ill just upgrade it then. I have two 12.0 milwaukee batteries om my mx500 but I'm about to get a couple of 350s. I think I'll try the same thing and if it works then good and if not that's OK too. I just wanted to make sure it wouldn't fry something as soon as I hooked it up.

At what voltage do you need to stop use? Was looking at adding a low voltage cut off my kids won’t pay attention I don’t want them to drain the batteries past their limit and ruin the batteries

@JordyBuilds

Жыл бұрын

I believe the milwaukee batteries have bms and don’t let them go below their minimum

You can find the milwaukee battery adapter on temp for $ 4.71

@JordyBuilds

Жыл бұрын

Plus a good chunk for shipping. Going to be offering plug and play adapters very soon!

Could you use this same setup with one 40v 6amp ryobi battery

@JordyBuilds

8 ай бұрын

I’m not sure if the battery specs on those.

I know you said you'll make a video comparing how much faster it will be. But can you tell us by feel how much more torque and faster by feel.

@JordyBuilds

2 жыл бұрын

So I never rode a stock one, I got this one with no batteries and did the upgrade. But I’m 140lbs 5’10” and I hit 20 mph on flat ground, rather quickly!

@irocss85

2 жыл бұрын

I'm 170lbs my stock mx350 gets to 14mph. It's dramatically slower on the grass though but still gets up to speed. I'm curious how long do those batteries go on a charge.

@JordyBuilds

2 жыл бұрын

@@irocss85 little over an hour for me!

If I’m using two 20v dewalt will it still work with your 36v controller?

@JordyBuilds

Ай бұрын

Yes I sell a full kit! Check the over volt parts on my website in the description!

Would this work the same on the Razor Pocket rocket? Want to convert one to high power drill battery but don’t know where to get parts and what parts to use?

@JordyBuilds

Жыл бұрын

Yes. Try razor website or scooter parts

@josephmooney159

Жыл бұрын

@@JordyBuilds Ok thanks for the advice!

Do you have to have the mx500 and sx500 eletrical kit?

@JordyBuilds

Жыл бұрын

You need to have a 36v brushed controller with a variable throttle

How do you connect the battery adapters to the battery mount frame?

@JordyBuilds

3 ай бұрын

I send two bolts so you can drill hole and bolt down

So I hooked my son’s hyper 350 the way you did. Both 6.0 Milwaukee batteries were fully charged. After my son’s first ride he checked the batteries and they were flashing only one cell. Have you experienced this before. The batteries are brand new.

@JordyBuilds

2 ай бұрын

Are they real Milwaukee batteries? Put em on the charger a few times that may reset them. I always suggest pulling batteries at 1 bar

Just did the same mod but ordered 36v kit on Amazon. How’s yours holding up ? Do you reccomend using inline fuses ?

@JordyBuilds

3 күн бұрын

I use one just because it’s on there, but should be fine without

Do you HAVE to get a MX500 controller? I wired my batteries it wants to move with 2 ryobi 18v batteries but doesn’t

@JordyBuilds

10 ай бұрын

Yes and a variable throttle. I can sell you both if you need. Shoot me a email @ jordybuildsyt@gmail.com

Great video! If I want to add more batteries to make it last longer I should just connect all of them in parallel so I don't get over 36v and fry my controller?

@JordyBuilds

2 жыл бұрын

Sorry for the late response but yes!!

@DeliberateNRandom

Жыл бұрын

Ya, you can add as much as you want, it will only draw the amps it needs at that voltage.

What about the one small red wire without a small black wire? I dont have a meter to wire.

@JordyBuilds

10 ай бұрын

You won’t need it

What did you do with extra cables on the controller? Not sure If I saw you use them all?

@JordyBuilds

2 жыл бұрын

Since it’s a mx500 controller it has some extra connections I didn’t use like brake light and such! I usually zip tie the extra wires together to help with cable management.

@cdb1957

2 жыл бұрын

@@JordyBuilds I am getting clicking and no movement on the motor. I am using only one Milwaukee drill battery at the moment. Do I need to use two for this controller to work?

@JordyBuilds

2 жыл бұрын

I’m not sure if 18v is enough as some require a minimum input

Hi Jordy. Have an issue that I’m wondering if I could bounce off you. I followed your video, minus replacing the control board and throttle. I’m getting power and the motor will “click” and if I turn the throttle 15 times it will actually go. Wondering if you have any thoughts on what could be wrong?

@JordyBuilds

Жыл бұрын

What controller and throttle do you have?

@andrewtietyen330

Жыл бұрын

@@JordyBuilds the standard throttle and controller that came with the mx350

@JordyBuilds

Жыл бұрын

I upgraded to the mx500 throttle so I could have a variable throttle. The 24v is just a on off throttle really

@andrewtietyen330

Жыл бұрын

Hey Jordy, just in case someone else asks, it was definitely the controller. There must be some limiter in the 350 modal but works like a charm with the 500 controller. Thanks!

@JordyBuilds

Жыл бұрын

Super glad to hear ! Thank you for the update

Would this work with the Milwaukee M12 batteries with the stock MX350 controller and throttle? If so what amp-hour batteries and how well do you think it would work?

@JordyBuilds

10 ай бұрын

No

@mattanfang

10 ай бұрын

@@JordyBuilds Well it did work but with a total voltage of 24 volts, it was slower the the lead acid batteries that are over 26 volts I just measured. To be safe I tried an M12 + M18 for 30 volts so I wouldn't blow anything. Both had 4amp-hour batteries. Seemed fine for a 1.5 mile ride with my son on it but long-term I'm not sure if the unbalanced battery setup would cause an issue if I decided for a more permanent long-term mount of this.

@JordyBuilds

10 ай бұрын

You absolutely cannot combine different voltage batteries OR different ah Batteries. Doing both I’m actually surprised you didn’t have a fire. I would definitely suggest you do a lot more research before you continue.

Do you need to use the mx650 throttle and controller or can you use the existing one

@JordyBuilds

Жыл бұрын

Yes

is there a way to incorperate the stock switch into this setup.

@JordyBuilds

12 күн бұрын

Check out my kits I sell with a key switch!

I’m having trouble calibration the battery display . Bough mine used and don’t have the instructions

@JordyBuilds

Жыл бұрын

I’d try to find your exact one on Amazon and they usually have a picture of instructions there boss!

where do you put the on and off switch ?

@JordyBuilds

10 ай бұрын

I don’t believe I used one

How long do these batteries work on a full charge?

@JordyBuilds

26 күн бұрын

I get 40-60 minutes from a full charge of the 5ah batts

I have a mx500 controller but does it have to have the variable throttle or would the stock throttle work?

@JordyBuilds

2 ай бұрын

Variable throttle

Have you had any problems with motor heat

@JordyBuilds

Жыл бұрын

It gets a little warm but haven’t had any issues with it

Will a stock mx350 perform with two 18v Milwaukee batteries

@JordyBuilds

2 ай бұрын

No you need 36v controller and variable throttle

I Just upgraded mine but with a battery pack with an XT60 connector, what the best place to hook up the display screen?

@JordyBuilds

Жыл бұрын

Either the stock plastic battery box or I’ve seen people mount them by the handlebars too

@billyhendrix

Жыл бұрын

@@JordyBuilds Oh gotcha, that makes sense but I was trying to figure out how to hook it up for it to work with the XT-60 connector. Also Is there a special button or configuration you have to push to get it to work?

@JordyBuilds

Жыл бұрын

It should come with directions to set up for your battery. It just connectors to the positive and negative of your battery wires off your controller

I got eveything installed i have power and here click noise on the contoller when i hit the throttle but the motor is not moving. I am using two 18v 5ah milwakee batteries. Any suggestions?

@JordyBuilds

Жыл бұрын

Are you using a mx500 throttle and controller ?

@eddiestauffer4000

Жыл бұрын

@@JordyBuilds yes

@JordyBuilds

Жыл бұрын

Sounds like a bad motor or the chain is too tight maybe. Join the Facebook group “modified razors” and ask there. Forums or Facebook groups have helped me trouble shoot a lot

If i take two 20v 5ah batteries the set up will work??

@JordyBuilds

13 күн бұрын

Yes. Check out my plug and play kits!

I bought the mx650 controller and throttle but I am a little bit confused. It has throttle, battery and motor which I knew it had. But there are only 3 wires left. 2 of the same looking ones which I think is the brakes and one other which is the charger. That would mean if we only use one of the brake wires I would have 2 plugs that I wouldn’t be using. You said 3. Did you make a mistake or is my controller different than yours. Thansk

@JordyBuilds

11 күн бұрын

Not sure it’s been too long. Just compare through the video. Either way you don’t need brake or charger so doesn’t really matter. Just need motor throttle battery. Switch if you have it set up

Can u just use all stock parts and just put 1 dewalt adapter and run it just on that? Or I have to have 2 dewalt batteries and upgrade the voltage controller and throttle

@JordyBuilds

3 ай бұрын

No that’s a 18v battery it won’t power a 24v system

@JordyBuilds

3 ай бұрын

jordybuilds.co/products/mx350-kit?ToPasteboard

Can you give the battery specs of the battery, is it M18 18-Volt Lithium-Ion XC Extended Capacity 5.0 Ah Battery?

@JordyBuilds

11 ай бұрын

Yes both are. Both need to be matching.

Is the throttle you put on variable?

@JordyBuilds

6 ай бұрын

Yes the mx500 throttle is variable. The newer stock mx350 throttles are not

Are the last 3 plugs used for anything ?at 7min12seconds can’t figure that part out

@JordyBuilds

6 ай бұрын

I didn’t really see what plugs you mean. Just need motor, throttle, and battery when using the mx350 controller

@victorv49

6 ай бұрын

It was the three tied together

how tall are you? im thinking of modding a mx350 but i dont know if ill fit, im 5'6-5'7

@JordyBuilds

7 күн бұрын

5’10”

How fast was it and how fast does it go now

@JordyBuilds

Ай бұрын

Check out my video after this one! Also sell full kits now too

Hey was wondering if you could help me out with a couple things on this build. I just finished the same build. Only difference is I’m running two 20v 5ah batteries. The led volt meter always shows 100% and never moves. The volts works, starts off at 40.9v but then only will go down to roughly 32v and the bike is almost dead. The tester right on the batteries shows they still have power. Not sure why I’m not getting full battery use. And not sure why the percentage is not working on volt meter.

@JordyBuilds

Жыл бұрын

The bolt meter comes with a manual you have to set it up for what batteries you are using. As far as the power just make sure both batteries are fully charged. If it wants to stop and go still it’s possible the motor is going out

@DescartesRenegade

11 ай бұрын

The discharge curve from a lith-ion battery is very different than the lead-acid ones. The meters have to be compatible with battery type. You may be getting inaccurate readings. Also, lith-ion drops off very quickly in voltage. It could be reading 40v one minute and quickly dip to 30V, and by this time, the battery needs charging.

@JordyBuilds

11 ай бұрын

Your 5ah batteries are not dropping 10v in a minute. 30v is also below the voltage cut off when you’d need to pull batteries. Make sure to not spread misinformation.

@DescartesRenegade

11 ай бұрын

@@JordyBuilds look at the lithium ion discharge curve. With a large enough load, it would easily run out of juice in a minute. The curve drops off a cliff.

@JordyBuilds

11 ай бұрын

You’re incorrect but okay

Hi, when upgrading an MX 350, what makes the bike run faster and go further, higher volts or amp hours? I purchased a power sport AGM motorcycle battery and it fits the MX350’s battery compartment. Which is better, the drill batteries or the motorcycle battery? Thank you!

@JordyBuilds

2 ай бұрын

You’d need multiple batteries in series using batteries like that. Not efficient pr put out any amps at all. Volts is your top speed and amps is how fast you get there. If you don’t already have multiple drill batteries I’d recommend a cao mm lithium battery from Amazon!

@readyfreddy77

Ай бұрын

@@JordyBuilds Hi Jody, So, I would like to purchase the 36v 800w Controller with Throttle Overvolt Kit you have on your website. However, I would like to use two 18 v Milwaukee batteries, and I am unsure how many “pins” under the battery option I should choose. Thank you for your guidance!

@JordyBuilds

Ай бұрын

@@readyfreddy77 I have a full battery adapter kit with the Milwaukee adapters all together! It’s in the over volt tab. I’ll link it in description as well

@readyfreddy77

Ай бұрын

@@JordyBuilds Already placed my order. Thank you!

Hey man i built mine using 12v batteries in a series to get 36v. Currently buying new throttle and speed controller. But i hooked it all up (without a speed controller) and used a switch instead of a normal throttle. Now the bike only last like 10 mins on full charge. Do i need to get a 36v speed controller to get more power longevity out of these batteries? Please i need help. Thx

@JordyBuilds

Жыл бұрын

what AH are your 12v batteries?

@camobranch

Жыл бұрын

@@JordyBuilds 7.5 amphs each

How long the berries last tho

@JordyBuilds

2 жыл бұрын

Little over an hour on flat ground !

Hey man would this work with 3 or 4 of the 20v dewalt batteries? I wanna buy a 72v motor and controller, and figured instead of buying a 700$ 72v battery i could use 3 or 4 of my 20v drill batteries?

@JordyBuilds

6 ай бұрын

They high of voltage is not recommended for 72v and it would still be low amps so wouldn’t be much point. For intro to 72v I’d recommend a 72v 20ah 120a from amorge

@marcz239

6 ай бұрын

@JordyBuilds thanks for the response, financially I think I'll have to go lower volt than 72 for now definitely lmao

@JordyBuilds

6 ай бұрын

@@marcz239the shrimp depo on facebook has 60v batteries for $250/$300

Thanks I had just picked up a electric scooter but it had no battery and I’m not even sure if the motor still works I tryed n bypassed the battery plug to a 20v battery I have power no movement

@andrewnagy600

9 ай бұрын

I’m about to just throw a lawnmower engine on it if I can’t figure it out

@JordyBuilds

9 ай бұрын

One 20v probably won’t do anything. Most scooters are 24v

@andrewnagy600

9 ай бұрын

@@JordyBuilds yeah I found that out it’s cool ether imma just upgrade it or just put a mower motor in it

How long does the batteries last like this?

@JordyBuilds

Жыл бұрын

40 minutes to an hour depending on weight and size

What will this do to the motor over time? How fast will it go?

@JordyBuilds

10 ай бұрын

See my other video! Motor last a long time on 36v

@bricksandpieces1

9 ай бұрын

@JordyBuilds ok, also what is the recomended bike/battery? How much in total did this build cost? I am thinking about building one for myself, but I don't want to spend to much on it. I want it to do like 25 or 30 mph if that is possible.

@JordyBuilds

9 ай бұрын

@@bricksandpieces1 it really depends what you want. If you don’t go milwaukee I’d go lithium. A 36v 15ah I think is like $180

Can I use a mx650 controller and throttle

@JordyBuilds

Жыл бұрын

Yes that’s exactly what I used here

Will this work for the mx400?

@JordyBuilds

8 ай бұрын

Yes

How long does the battery last?

@JordyBuilds

13 күн бұрын

Depends what ah. U get 40-60 minutes on two 5ah m18 Milwaukee’s

What kinda run time does those two 18v 5 amp batteries get you?

@JordyBuilds

Жыл бұрын

About an hour on flat ground! I’ve done a little over mile round trip on them lol!

@mattanfang

10 ай бұрын

@@JordyBuilds Wouldn't it be able to go more than a mile it it could run for an hour drawing 10 amps?

@JordyBuilds

10 ай бұрын

@@mattanfang what

@mattanfang

10 ай бұрын

@@JordyBuilds Sorry I was confused at how much runtime you got on them with 2 5 amp batteries. I think you mean an hour runtime and so far you've only ran it for a mile but that's not the total distance taken in the hour of runtime. My kids are smaller so maybe 2 5 amp batteries will hopefully suffice. Thanks again for the awesome vid

@JordyBuilds

10 ай бұрын

@mattanfang I did a full test not in the video on how long I got to ride on two 5ah milwaukees in series and it was about 45 minutes but I’m also 150lbs

For perspectives? How tall are you?

@JordyBuilds

5 ай бұрын

5’ 10”

How would i connect 4 of these in order to achieve 72v

@JordyBuilds

Жыл бұрын

Wire them in series!

@nextgeneration4211

Жыл бұрын

Armando... have you done this yet in 72volt? I heard that it will burnout the motor. There is an upgraded controller and motor for 72volt that can be purchased to accomplish that upgrade. I was just wondering if you did it to know exactly if it works.

@armandosanchez9496

Жыл бұрын

@@nextgeneration4211 yes i did but for the over volt 24 to 36 i used 2 in series and 2 in parallel and recently went with the big boys to a 72v 3kw motor and controller on 4 m18 batteries in series

I'm in the Modified Razors Group too but I'm in the group of crazy people that want 70mph out of an MX650.... 😁👍

@JordyBuilds

Жыл бұрын

Going to be me soon ha!

@xpndblhero5170

Жыл бұрын

@@JordyBuilds - Yeah, that kind of happens.... I always tell people when they first ride one "Welcome to your new addiction" and it's not a joke. 😂

how many teeth does the pinion have? and how many teeth does the crown have?

@JordyBuilds

Жыл бұрын

Stock sprockets I think the motor has a 11 tooth sprocket

I did mine but my motor works but tire doesn’t spin

@JordyBuilds

11 ай бұрын

Probably need a new freewheel or weld it

I have a newer mx350 what do i do with the on off switch?

@JordyBuilds

Жыл бұрын

You can wire it in if you’d like

@lipy1212

9 ай бұрын

​@@JordyBuildshow do I do that? With which wire?

So we did this to my sons. Only issue is when he full throttles it makes a whistling sound. Anyone know why

@JordyBuilds

Жыл бұрын

Just the motor from being over volted probably

@courtnielarragoitiy1770

Жыл бұрын

@@JordyBuilds should I update the motor?

@JordyBuilds

Жыл бұрын

If the motor is not making a smell it’s probably fine

Qual kit relacao?

@JordyBuilds

Жыл бұрын

Details in the description!

I did this to my hyper 350 and it’s going in reverse??

@JordyBuilds

2 жыл бұрын

That’s very odd. The polarity of something must be backwards

@tylerdyer5879

Жыл бұрын

Something's wired backwards

I run 40v on mx350 controller and it didnt fried

@JordyBuilds

Жыл бұрын

With variable throttle

Is this everything you need

@JordyBuilds

Жыл бұрын

36v razor controller & throttle, battery adapters. That’s about it

How many hours dose it last on those 2 batteries

@JordyBuilds

2 жыл бұрын

Little over an hour on flat ground!

@jamesthompson6085

2 жыл бұрын

Can I do it with one Lithium 20 vote dewalt battery

@JordyBuilds

2 жыл бұрын

@@jamesthompson6085 no, that’ll only be 20v. They are more than that stock

@BoostedBroz

Жыл бұрын

@@JordyBuilds dose the on /off button still work or no

just for completeness: the stock battery is 24v 7 amp hours the new battery setup would be 36v (two 18v in series) and 5 amp hour you should see a small decrease in range from stock, but this is completely determined by the amp hour of the batteries you plug in. Just make sure they are the same, or the smaller battery will do more work and wear itself out

@JordyBuilds

Жыл бұрын

The batteries that was in mine I think were 5ah

How long is the range?

@JordyBuilds

Жыл бұрын

About an hour on flat ground

@bluberry3026

Жыл бұрын

@@JordyBuilds Wow that’s way more than I expected it to be

@JordyBuilds

Жыл бұрын

The 5ah are awesome I couldn’t imagine the 12ah

@bluberry3026

Жыл бұрын

@@JordyBuilds yeah I was gonna buy a big 36v but knowing how long that lasts I think I might have to change my mind!

Is that a stock motor

@JordyBuilds

Жыл бұрын

Yes

@mattanfang

10 ай бұрын

@@JordyBuilds did the stock motor ever burn up with your 36 volt setup? How often was it ran and what do you think the risk is?

Is it still chargeable

@JordyBuilds

Жыл бұрын

I charge the milwaukee batteries individually

Is it Just me or does this guy look exactly like the actor in Knocked up that plays Seth Rogans roommate?

@JordyBuilds

Жыл бұрын

hahaha

To much work , just use fast scooter mod and buy a 36v battery and a 750 watt motor. Though this is a good mod to safe money.

@JordyBuilds

Жыл бұрын

I didn’t think it was that much work. No need to spend money on a fast scooter controller when a mx500 is almost identical. This does save money if you particularly want to use drill batts. I do agree go lithium though. I have two built mx500 48v lithium 2kw.

Do the work with mikiada batteries I definitely butchered the name

@JordyBuilds

5 ай бұрын

If you can wire em to 36v

Will this work on a mx650

@JordyBuilds

Жыл бұрын

Yes

Why is my motor smoking

@JordyBuilds

26 күн бұрын

Probably burnt up. Message my facebook page I’ll send you a link to a good replacement

@JuanRobles-tt7rt

23 күн бұрын

@@JordyBuilds please and thank you

Screw the controller all together just run a switch between battery and motor easy and fast

@JordyBuilds

Жыл бұрын

That’s how you fry a battery as well as start a lithium fire. I’ll pass but you do you !

If I ad the controller and throttle to my 24v mx350 will it give me any more power? Or work? Or do I have to do 36v?

@JordyBuilds

Жыл бұрын

Yes you need 36v to run the 36v controller