Nicely done! About a year and a half ago I built something similar but instead of using a buzzer I used an RS recording module. That required me to do some level translation because the module needed a 9v supply. I ended up using a BS170 NCHAN MOSFET to drive a 6N137 opto-isolator. My original intent for the device was for it to discourage our cat from leaping onto the table. When detecting motion it would yell, "Intruder Alert" and flash a jumbo red LED. Unfortunately our cat thought it was a toy and proceeded to constantly trigger it. She outsmarted me again! :-D

@doorguner01

7 жыл бұрын

John Brandolini THAT darn cat!

Another well explained and thumbs up video. Thank you

I wondered what people meant below but having watched most of it I now see. This is a truly excellent tutorial with nothing left for newbies (like me) to be scratching their heads over. Even links for (reasonably priced) bits. Thanks for sharing, well done, keep it up!!!!

@electronicsNmore

6 жыл бұрын

David Farmer Glad you enjoyed the video Dave!

@davidmg1925

6 жыл бұрын

NO problem...... it makes so much difference when everything is clearly labelled ..... are you a teacher by any chance? There are a few good ones out there now but this is VERY detailed/helpful and just the right pace. FWIW I'm trying to link up PIR(s) (motion detectors?) with cameras for wild life monitoring (again FWIW there are hundreds of out of date digi cams out there .......... if some one knew a simple connection with your motion detector that would go well too I think)

Had to order some of the PIRs, will be useful and have some fun also!

Cool video. Thanks for not putting any annoying music

"Thank GOD", and thank you for your support and time 😉 This is REALLY cool and helpful 😎

@electronicsNmore

4 жыл бұрын

You're welcome! Be sure to check out my wide range of videos for many other videos of interest to you, and share. Thanks kzread.infoplaylists

Thank you! I've tried it and its work😁

@edsonmora6589

5 жыл бұрын

Can u plz explain how the zener regulator circuit and the zener 1w diode connected to the pir module

Very beautiful video

Very useful design indeed. I am hoping it will be a deer deterrent,this growing season. Thank you for sharing. All my best. Bobby

Thanks, a great way to begin my personal project.

@electronicsNmore

4 жыл бұрын

I have many cool circuits/projects on my channel, so be sure to look over my extensive video playlists below. Thank you! kzread.infoplaylists

@parabugsknowingtheunknown.

3 жыл бұрын

@@electronicsNmore how would I add lights to this?

very cool. I don't know what's more amazing, how simple that is to make or that you actually found something useful and in stock at radio shack.

@electronicsNmore

7 жыл бұрын

Good one. :-)

@ooloncolluphid7904

7 жыл бұрын

I know, right? When I was a teen I remember Radio Shack as THE place to go for electronic parts. Now, they're all phones and toys. You'd figure they would take notice of our (DIYers) growing numbers and sell a diode or two.

@electronicsNmore

7 жыл бұрын

Online companies and China did a number on Radio Shack.....Sadly, the same applies for many companies in the USA.

@CSSIandAssociate

6 жыл бұрын

They failed because of increasing competition when for a long time they were the only ones on the block. Many of us rode our bikes to the store just to get a book. That is where they failed. Stopped being the leader in the mentor role. Tandy University could have been their place. Future technicians and electrical engineers. They had the books, but kept selling stuff to a market that had just as much access if not more. That they had. It is a shame. However that is life and that is the movement of the Capitalist system. You fail someone will fill that void. Case in point cars replaced horses and buggies and buggy whips. It is just the way it is. And thank goodness. I like indoor plumbing and air conditioning and with the crazy Ohio -19 degree winters I so... appreciate central heat and my insulated and heated garage. THANK YOU GOD! With that said I am a part of the Radio Shack crowd my library has many of their books.... Oh, lastly it is because of Radio Shack I was introduced to the 555 timer through the engineer's notebooks I used and LED with its own housing to be strobes for my model airplanes and my sci-fy models from Star Wars. No one else at the time was doing it. Oh, I also put in micro switches into those handheld and football games and baseball games in the late '70s and early '80s so the could run silent in school. I got $5 bucks a whack plus parts for doing that. I must have made on average $125 every two weeks and I was only 13. Never got in trouble either...

thanks! its a great alternative materials for my project. :)

@electronicsNmore

6 жыл бұрын

You're welcome! Be sure to rate thumbs up, check out my video playlists, and share.

Nice project brothers

This Man is so cool living in a ruff neighborhood you can't take nothing for granted

I ALWAYS WANTED THIS!!

@electronicsNmore

7 жыл бұрын

StevenTheSlayer_1 Sure is a very handy device. :-)

DIY VDO Tutorial should be like this. thank you for your details description.

@electronicsNmore

7 жыл бұрын

You're welcome! I have many excellent videos on this channel, so be sure to watch my video playlists, rate thumbs up, share my channel with others, and subscribe. Thank you

thanks for getting back to me. take care.

@electronicsNmore

6 жыл бұрын

You're welcome!

Great project

@electronicsNmore

7 жыл бұрын

Glad you liked it. :-)

Thanks for sharing

@electronicsNmore

7 жыл бұрын

Edmorbus You're welcome!

This is awesome. I paid 50 bucks for something similar on Amazon to stop my dog from accessing certain areas. Needless to say I'm returning it

@electronicsNmore

6 жыл бұрын

PhillyAviator86 Thanks for watching!

Please my science fair project is in 2days can u explain how to do a little more specific like how to wrap it around the pir mojule and all that please

Thank You!!!

@electronicsNmore

4 жыл бұрын

You're welcome! Be sure to check out my extensive video playlists below for many other videos of interest to you, and most importantly share my YT channel on social networking sites. Thanks for watching kzread.infoc/playlists

nice.Even I understood how. 👍

Dang I just ordered the parts for the trip wire setup. Gotta order more parts lol.

At least you’re 100% honest These Indians are so hard to believe because I have so many fake videos. It’s so nice to see somebody who is honest.

Great video. I was looking to install some LED strip lighting and a sound recorder with a siren sound that would both trigger off motion (PIR Sensor) when a bean bag goes into the cornhole hole. Any ideas on how to set something up like this or where to find online?

@electronicsNmore

6 жыл бұрын

Thanks Phil! You're better off using a pressure sensing pad in the hole.

is there a way of getting this to ignite an e-match ? if so can you explain how please or do a video if the resistors etc are different

Friend i got a question it works. But it works only as a motion sensor and not PIR sensor. Because when i throw a towel in front of it the alarm Will go off. I want it to go off only when it detects a large heat source and not lifeless objects like moving curtains etc I have tried to adjust the sensititvy censor but no luck. Need.your help to.tackle this

Thanks you for this amazing video. I'm just a start with electronic. So I want to ask u whether I should use the PIR on Arduino first before start to connect this circuit or no need to use Arduino?

@electronicsNmore

6 жыл бұрын

No need for Arduino for this security device. Be sure to rate thumbs up, check out my extensive video playlists for other great videos of interest to you, and share my channel with friends. Thanks!

Thank you great video!! Can I use this same setup with a cat5 cable supplying voltage AND signal for the piezo to be remote like 600'? (as driveway alert) Thanks!

@electronicsNmore

4 жыл бұрын

Check out my other video. kzread.info/dash/bejne/kYNnmKSrZ7HJqrw.html Thanks for watching!

@thomasjehnkins1986

4 жыл бұрын

@@electronicsNmore that other video didnt answer my question I want to send signal and dc voltage thru a single cat5 cable to remote the remote pir but sound the alarm at house...using a computer power supply...think its possible?

OMG we think the same!! I was just gonna ask for one of these!! My car got broken into 4 times😡 I couldn’t figure out a good way to do this. I was thinking more of a camera with light that shot mace….. Ideas?

Well done! Cheers. Eric

@electronicsNmore

7 жыл бұрын

Thank you! Be sure to rate thumbs up, share my channel with others, and check out my extensive video playlists. :-)

@MkmeOrg

7 жыл бұрын

I could say the same :) I've shared your channel on my live shows a few times. Cheers

@electronicsNmore

7 жыл бұрын

I'll check out your channel. :-)

@MkmeOrg

7 жыл бұрын

Suspect you might find some vids of interest :) Lemme know. Cheers

@cri8tor

5 жыл бұрын

@@MkmeOrg Think you may have knocked it out of the park with your WiFi version. Hope you do an update for those of us who have a little difficulty with Websites. Cheers

This is a Great tutorial, Thanks for sharing. Can I ask a question please 😀 Would it be possible to have this outside so that when someone walks up my drive the alarm sounds inside the house. Thanks John 😀

@electronicsNmore

5 жыл бұрын

Yes. In place of the piezo alarm, use a small reed relay to trigger the contacts on a wireless doorbell. :-) kzread.info/dash/bejne/kYNnmKSrZ7HJqrw.html

Can I add a light for this project? Is it work?

Where can we attach camera in the circuit?

I am looking for info on adapting an expired smoke alarm with an old computer mouse (for the infrared detection) but haven't got a clue how to combine both. Also, was thinking How to adjust it so alarm/piezo only goes off for say 10 secs. If you can help me with a resolution I would be very grateful. P. S. I already made a simple bath water alarm with the old smoke detector - by soldering a two - wire computer connector to it And just dangling the plastic connector end a certain depth into Bath when running it, then turning off and shaking the plastic end when alarm sounds., so thought it could possibly be adapted to make a fox deterrent for the garden. What do you think? Thanks for sharing your video.

@electronicsNmore

3 жыл бұрын

You don't need the smoke alarm, there's much simpler ways to make what you want. You can search online for schematics for circuits that you need, or look on my channel. Thanks

Can the pir module be substituted with microwave sensor?

THANK YOU awesome video, i've been comparing motion sensors and this unit is more sensitive, lasts longer, and has a wider field of view than most of the commercial units that you buy off the shelf that eat AA batteries like it's going out of fashion. I will be using a regulated 12v power supply, which in turn trickle charges 3 x 12V 7Ah connected in parallel , which i use for our LED lighting, router and 2 way radio when power goes off here. One question will i still need the Zener voltage regulator if I'm using 12v instead of 9v. I know some of these boards have their own regulator built in , does this one? I've ordered an extra board just to test and see, if it goes I'll revert back to 9v, if, not I'll keep you posted. THANKS again for the awesome videos. Liked, and Shared

FYI. You really should have a current limiting resistor in between the output of the PIR unit and the base of the transistor. The output can only source 5 to 10 milliamps of current based on the BISS0001 chip specs sheet.

@electronicsNmore

6 жыл бұрын

jp040759 Not necessary, but you can add one if you desire. Thanks for watching

I am hitting a stumbling block. I think the 1N5406 "Diode" has been replaced. I cannot find it. I can find the 1N5408 is there a chart that shows older components that have been replaced with new ones? Frustrating. Lots of work. This is for a Flat screen I am looking at known components that go bad. In addition this time of year is when I start working more on projects like this. However, I don't know what a good assortment of X Diodes, Caps, Transistors, Resistors, etc. I should have. Any advice you can give will be appreciated as always. Thinking about getting that cordless soldering Iron you have.

@electronicsNmore

6 жыл бұрын

Ebay has a 1N5406......600v/3A. A good set of rectifier diodes(1A and 3A), along with Schottky type: bit.ly/2xGXyEu Set of 1/4W resistors: bit.ly/2iROVny Transistor Assortment: bit.ly/2xGYXee Electrolytic Assortment: bit.ly/2eyTgKW Film Capacitor Kit: bit.ly/2vBK9Ae If you decide to buy the cordless soldering iron, let me know so I can provide the link so I get credit for the purchase. It won't cost you any extra money. Thank You!

Do you think the PIR could be triggered from a distance with a IR laser?

How to connect 5v 1amp charger to this circuit? Can you help me please ? Can you provide me a circuit diagram?

Hi! Is it possible with the same diagram to use 4.2V 18650 lithium batteries? I’m planning to make a prototype connected to a 3.5W 6v solar panel.

@electronicsNmore

5 жыл бұрын

The PIR module has a voltage regulator built into it. If you supply less than 5V, the regulated power output will be unstable. Use (2) 18650's in series. Be sure to check out my video playlists and share. Thanks!

Thanks for making this video. I have a PIR 8 - 12/24v with input connection on it already. Could I use it as a switch to activate a 12v alarm ? Or would the circuit need a relay ? And would it also be possible to add a remote switch ?

@electronicsNmore

3 жыл бұрын

All depends how much current the output can handle. Look up the specs.

@richard8241

3 жыл бұрын

@@electronicsNmore 12v Car horn.. I was thinking a circuit of. 12v car battery - PIR - car horn.. If someone opened my car door it would go off. Though then this only would work at night I think..

That's a handy little alarm, neat idea! But, I see one flaw in your design - you don't need that Zener voltage regulator, the PIR module has its own little 3.3V regulator. It's a little 3-pin chip with a tab, google the part number, I'm sure you'll find that it is an LDO voltage regulator. Without that Zener circuit, the battery will last much longer, because the PIR consumes

@electronicsNmore

7 жыл бұрын

MrJohhhnnnyyy The module says + 5v input required.

@mrjohhhnnnyyy5797

7 жыл бұрын

I have 2 of these modules powered from 13V and they do just fine for 3 weeks by now. Stuff from China has bizarre ratings, most of the times they claim too much, but on these modules they underrate it. I have those modules on the light fixture, which is powered for 4+ hours each day, modules don't mind that at all.

what is the exact output voltage of this system??

Thank for Great tutorial. Can be possible to add a Cam and WIFI to the design? Also For how long, it can run in battery?

@electronicsNmore

4 жыл бұрын

You can remove the alarm and use a reed relay to trigger another device such as a camera.

Hi!, Great video btw, I have a question, I have a constant 5-4.9V DC input instead of a 9V battery, can I remove the zener regulator circuit?

@electronicsNmore

5 жыл бұрын

Yes, a 5V input will work fine. Be sure to check out my extensive video playlists for other great projects and videos of interest to you, rate thumbs up, and share. Thanks for watching!

@slytherin9090

5 жыл бұрын

@@electronicsNmore Yes, Thank you!

Hi good day, I am wondering if it's possible to make a proximity sensor with a "unique trigger" (that can be attached to let's say a cellphone case or camera case). So that if a thief would try to leave my store with an item with that unique trigger attached to it, the device or alarm (which is placed by the door) would trigger an alarm. Thanks in advance - doby Show less

@electronicsNmore

6 жыл бұрын

Refer to my video below: kzread.info/dash/bejne/npOL1cGwm9vZhLA.html

Nice

@electronicsNmore

6 жыл бұрын

Glad you enjoyed it! Be sure to check out my "Alarms" video playlist and other video playlists. Also rate thumbs up and share my channel with friends. Thank You

why the resistors? as the pir will run up to 20v right?

sir how many days the battery will survive??m planning to use a micro controller and transmitter(nrf24l01)with similar kind of design..

@electronicsNmore

6 жыл бұрын

Never tested that. Take the battery's rated capacity and divide it by the standby current. For a very long time, use a Lithium 9V battery.

I'm after a portable PIR that when triggered can send a signal to an ear piece I'm wearing approximately 100 metres from the PIR. Can you point me in the right direction, or do a How To to make my own? Thanks

@electronicsNmore

6 жыл бұрын

You can use this circuit along with a reed switch relay to trigger the push button on a remote control for a wireless doorbell.

Hello, nice project.. I wanted to ask if I can use a 220ohms resistor instead of 200 ohms please reply thank you...

@electronicsNmore

2 жыл бұрын

That small difference should be fine.

@sushantadaki6212

2 жыл бұрын

@@electronicsNmore it would work ryt?

Can u somebody explain ...how to use two pin motion senser

have you got a cct that I could use to make an ir motion detector that sends mms and then I want to be able to remote trigger a trap door from my phone? regards, hugj

@electronicsNmore

6 жыл бұрын

No. You'd have to buy an electronic device and modify it.

can i do this project without using zener regulator , if yes? then how

@electronicsNmore

7 жыл бұрын

Use a lm7805 instead.

Does.the alarm switch off automatically after a period of time?

Superr working tutorial 👍 But how can I get 4/5V output from PIR sensor???

@electronicsNmore

5 жыл бұрын

You can't.

Why need to connect ground and zenner to input PIR? Why not the input PIR only got 5v from 9v supply?

@electronicsNmore

6 жыл бұрын

Just duplicate what I show in the video, it works PERFECTLY! :-)

Good Day Sir, How can we attach it with hooter and power it with main home electric switch.Kindly guide me

@electronicsNmore

5 жыл бұрын

Use a small 9V / 100-200mA DC wall transformer. Thanks for watching!

Can you use a light instead of the piezo alarm? And if you can you demonstrate that in another video? Great video

@electronicsNmore

6 жыл бұрын

You can use a fast flashing LED in place of the Piezo alarm. You'll need a 200 to 330 ohm 1/4w current limiting resistor in series with the LED. Thanks for watching, and be sure to share my channel with others.

Great tutorial. What's the title and artist of the music playing at the end of your video? Thank you for taking the time to record, edit and upload your work. Cheers

@electronicsNmore

5 жыл бұрын

Glad you enjoyed it. The name of the music should be in the video description area. I have many excellent videos on my channel, so be sure to look over my extensive video playlists for videos of interest to you and most importantly SHARE. Thanks!

@cri8tor

5 жыл бұрын

Yeah, thought I'd find the title and artist of the music in the description area, but no joy.

Nice easy and ingenious project congratulations ! Therefore what modifications should i make to reuse a professional pir (as aritech, risco, pyronix, visonic and so on) instead of using this cheap module ? Indeed those professional sensors are much more reliable and stable than this "toy"... I have to confess you i am the most stupid nebee in electronics :-( Anyway thanks in advance for your kindness. Cheers from Belgium !

@electronicsNmore

4 жыл бұрын

Unfortunately, I don't assist viewers with mods. I have way too many videos to be doing that. I only answer simple questions by viewers. Thanks for watching!

What kind of switch attached to that black casing?

@electronicsNmore

3 жыл бұрын

A simple SPST slide switch.

How would you set one up to notify you by phone or another way without alerting the person crossing the path?

@electronicsNmore

5 жыл бұрын

Have the output trigger a wireless doorbell like in my other video below: kzread.info/dash/bejne/kYNnmKSrZ7HJqrw.html

Hello, can you make a video how to play music with same module as above instead of alarm, as I am building one to repel monkeys in my farm. Or at least advise me how to attach pendrive music

Do you know of anyway I could have the PIR send me a notification on my phone instead of it buzzing out loud? For if I'm out of the house.

@luiscortes6563

7 жыл бұрын

I believe you have to get a GSM module. They can be used with Arduino or Raspberry pi

@cousiin4552

7 жыл бұрын

Ok thank you!

this is a really awesome video . but can i use any other type of transistor for this work?? please tell me

@electronicsNmore

5 жыл бұрын

Many other similar transistors will work.

@manuverma3974

5 жыл бұрын

thanks bro .can you name some for me please

@electronicsNmore

5 жыл бұрын

@@manuverma3974 All you have to do is look online for equivalent types.

How much did it cost u to make this motion detection alarm

i really liked this cauz iused a car horn in a place of a buzzer , helped to scare away predators on my chicken farm and intruders as well

@electronicsNmore

5 жыл бұрын

Thanks for watching! Please share.

Tried remaking this circuit in TinkerCAD. Won't work. The Zener diode is reading 4.67V and when I trigger the PIR it starts fluctuating between 4.67 and 2.67V but the Piezo won't make noise. Tried replacing it with an LED, still won't work. Not sure what to try next

@electronicsNmore

4 жыл бұрын

Works just fine, clearly that program doesn't work too well, because you saw me use the device in the video.

@whiz57

4 жыл бұрын

@@electronicsNmore so I got it to work after some tests. I had to drop the resistor to 100 ohms. 200 ohms was causing the voltage to drop too low so the Piezo couldn't function. Guessing the Piezo in the program isn't the same voltage rating.

@whiz57

4 жыл бұрын

Check out Tinkercad. Rather interesting program

Pressure sensing pad would be placed where?

@electronicsNmore

6 жыл бұрын

In the bottom of the hole where the bag ends up.

Please Sir how to activate it with human recorded voice command .

I have just seen this vid, but the pir in the description is no longer available. Any help?

@electronicsNmore

5 жыл бұрын

New link has been posted. :-)

@joeleharmon418

5 жыл бұрын

Wow that was really fast Thanks man

i have made this but it is not working why i have all the components

Did he connect the two things wit glue plz I need an explanation how he did this because I am doing this for a science project

@electronicsNmore

5 жыл бұрын

Yes. E-6000 clear adhesive.

@edsonmora6589

5 жыл бұрын

electronicsNmore can I have your email so we can discuss this into more detail I’m struggling to understand and I doing this for a science project

@electronicsNmore

5 жыл бұрын

@@edsonmora6589 Sorry, I have almost 500 videos with many people asking questions, I don't have any time to assist viewers with projects.

how did you work out to use a 200 Ohm resistor?

@electronicsNmore

4 жыл бұрын

Not a critical value. You can use hundreds of ohms into the thousands.

Does it work.through glass eg in a car?

@electronicsNmore

3 жыл бұрын

Highly unlikely that it will "see" through the glass.

when you first turn this on does it go off then you have to wait for it to reset ??

@electronicsNmore

5 жыл бұрын

When first set up, the alarm will sound once, then remain off until detection has been made. Thanks for watching!

Can that device be made with remote control for remote control on/off?

@electronicsNmore

6 жыл бұрын

Why do that when you have motion activation?

@theunreservedchannel

6 жыл бұрын

is that possible pls?

@domingospinto3570

5 жыл бұрын

Yes it is.. Use a latching type Receiver, instead of On/Off switch

i could not understand wehe I put bettry' s wire were put buzzers wire

with this circuit i can drive a 3v motor?

@electronicsNmore

3 жыл бұрын

Depends on how much power is required.

Can you mount the buzzer remotely?

@electronicsNmore

6 жыл бұрын

You'd have to use the remote control used in my other video below. kzread.info/dash/bejne/oamHsdWRXZO8gKg.html

The Zener diode link is not working. Tried to search with keywords that did seem to work either. The prices here are much better than EBAY. Thanks...

@electronicsNmore

6 жыл бұрын

This kit has many zeners all rated 1W! Be sure to use one of the coupon codes provided! bit.ly/2x1Pu4p

@CSSIandAssociate

6 жыл бұрын

Thank you enjoy your holiday weekend.

@CSSIandAssociate

6 жыл бұрын

The prices are amazing!

@electronicsNmore

6 жыл бұрын

Use this coupon code....9% off. :-) (11annv9%)

Tried really hard to do this I know nothing about electronics swinging item upside down side ways etc just confused me I gave up in the end

Bc 547 transistor npn or pnp pls reply

@electronicsNmore

6 жыл бұрын

NPN

sir ,how i get this pir

@electronicsNmore

7 жыл бұрын

Refer to the link posted in the video description area of the video.

may i know how to adjust the reset duration ?

@electronicsNmore

6 жыл бұрын

There are potentiometers on the PIR board. One is for distance and the other is for delay adjustment.

@chamriang8727

6 жыл бұрын

electronicsNmore I know, i means after the buzzer stop the sound, the pir motion need after 5 seconds to function again.. I want to stop the 5 seconds, reset.

please give me a idea

Hey man I don’t know why but my piezo alarm sounds very quiet even though I did everything.

@electronicsNmore

4 жыл бұрын

Sounds like leakage. Disconnect the base of the transistor and see if it stops.

@chowder2275

4 жыл бұрын

electronicsNmore yeah I tried that with a different bc547 and it didn’t work and then I tried with a different PIR module

can i buy this, i want this for project please

@electronicsNmore

6 жыл бұрын

No, you need to make one. Thanks for watching!

@amitrajsinha

5 жыл бұрын

i had made it and added to my device. and i winned the national level award . thank you so much.#electronicsNmore

Typically ,how long does the 9v battery last for ?

@electronicsNmore

4 жыл бұрын

If alkaline, and left on all the time, you can use it all night. 8hrs

@shireeshkantharaj7175

4 жыл бұрын

@@electronicsNmore thanks 👍 Instead of 9v battery can I do direct dc supply? Thanks for patience 😊

@electronicsNmore

4 жыл бұрын

Yes, it must be no ripple smooth.

Will a 2n222 work??

@electronicsNmore

6 жыл бұрын

2N2222......yes.

I cant make this work as it should, when I turn it on, only the buzzer triggers immediately and stays on. I have followed the steps but this doesnt work for me, does anybody have the same problem ?any idea of what im doing wrong?

@electronicsNmore

5 жыл бұрын

You may have burned up the transistor or the transistor isn't correctly installed(wrong pins).

@AEONTHECONJUROR7

5 жыл бұрын

@@electronicsNmore thank you. Ill check that out. I wish you great success with your channel, the videos and explanations are really good.

@electronicsNmore

5 жыл бұрын

Success can only be achieved if viewers share my videos. Thanks for watching!

I think i would rather connect the resistor and diode outside the pir instead os soldering to it.

@electronicsNmore

6 жыл бұрын

No big deal, whatever you like. I have many excellent videos on my channel, so be sure to check out my video playlists for other videos of interest to you and share. Thanks!

Will this work through glass?

@electronicsNmore

4 жыл бұрын

It may. Range may be greatly reduced.

wish you just made and sell it to me or on ebay. I dont have time or patience to diy.. thank you

@electronicsNmore

5 жыл бұрын

You're welcome! I wish I had the time to sell what I show on my channel. Be sure to rate thumbs up, share, subscribe, and look over my extensive video playlists for other great videos of interest to you. Thanks!

My buzzer continued to alarm ... What could be the problem?

@electronicsNmore

6 жыл бұрын

Either you incorrectly connected one of the components, need to adjust the PIR module POT's, or the transistor is shorted.

@christianbasilio2191

6 жыл бұрын

electronicsNmore I check the connections and the POT's is OK maybe the transistor .. I'll changed them

@christianbasilio2191

6 жыл бұрын

electronicsNmore I'm using HC-SR501 PIR its beeping every 10 seconds or above .

what is assorted 1/4W resistors means? Please reply this value

@electronicsNmore

6 жыл бұрын

I was giving you a link to an assortment of resistors for this project. Thanks for watching! Be sure to rate thumbs up, share my channel with others, and check out my extensive video playlists for other great videos of interest to you.