Пікірлер

• 
  @othername10007 сағат бұрын

  Is that 6 in of workable length on the wires?

• 
  @zamzam64019 сағат бұрын

  Primer is not cleaner

• 
  @kelleycary526210 сағат бұрын

  Thank you so much. I am a 58-year-old single woman who must do everything herself. Videos like this are a godsend.

• 
  @m3n4cE611 сағат бұрын

  you're cursed

• 
  @Dlab_s18 сағат бұрын

  I faund one for 20€

• 
  @khoa6710Күн бұрын

  What is an electric circuit called? Is it commercially available or is there another circuit that has the same effect?

• 
  @bobleveyКүн бұрын

  I have a pretty old rotary unit that also has heat and I’ve gone thru most of these tests one or two times and I think it might be the compressor. Can I replace the one I have that is not being manufactured anymore with one that is comparable. I did find a Cpl but the LRA numbers are a little different. I did a little research and saw that LRA stands for “lock run amps”so startup pull and have to coincide with the amps your motor pulls, is that correct? If so, the one I have is 29.5 LRA and the one I’m thinking about purchasing is 37 LRA. What would you recommend? Thanks again for your videos.

• 
  @GurnoorBoparai-gm9exКүн бұрын

  Would I be able to run a 3000w machine on it or no

• 
  @GurnoorBoparai-gm9exКүн бұрын

  I want to run a 3000w bitcoin miner on it will it work?

• 
  @GurnoorBoparai-gm9exКүн бұрын

  I want to run a 3000w bitcoin miner on it will it work?

• 
  @GurnoorBoparai-gm9exКүн бұрын

  I want to run a 3000w bitcoin miner on it will it work?

• 
  @GurnoorBoparai-gm9exКүн бұрын

  I want to run a 3000w bitcoin miner on it will it work?

• 
  @jimbrant9682Күн бұрын

  Thank you very much for the video.

• 
  @dnacannotchangeКүн бұрын

  light weight

• 
  @oldguy8177ableКүн бұрын

  i had problems car would miss etc when cold i cleaned ignition coil connectors with contact cleaner huge improvement not 100% probably 95%

• 
  @davidkerl1431Күн бұрын

  109 MHz??? The aviation band. Whu did you chose that frequency????

• 
  @spocksvulcanbrainКүн бұрын

  At time point 2:00 you talk about dissolved solids and some people don't want that. The fact is that pure water is NOT good for you. Not only does it lack any taste, but it has a horrible mouth feel and can actually cause your body to absorb to much water because there is an osmotic imbalance. People drinking water without salts and minerals may also find they have digestion problems due to salt water balance. So please don't make statements which lead people to wrong information.

• 
  @SINANOZYOLDAS2 күн бұрын

  Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.

• 
  @rucianobarber30442 күн бұрын

  the can looks like it as morning wood lol

• 
  @azarahwagner27492 күн бұрын

  If your car has over 60-80 K miles , you need new hoses PERIOD 😂

• 
  @pfsantos0072 күн бұрын

  This is excellent. Will add this to the other options (propane, starter fluid, smoke test).

• 
  @ashraf612 күн бұрын

  Very useful and helpful information. Thanks for sharing.

• 
  @badisbouchama18012 күн бұрын

  Wire nuts are shit

• 
  @JhonnyCash-JhoArevaFIFAplayer3 күн бұрын

  Sshh don't tell Edison there gonna kill us lolololololol haha kid tech but still genius... 😅monopoly 😂 is crying right now.. but still everything is gonna stay the same ...

• 
  @CarlBenjaminMac3 күн бұрын

  A coupling with a stop in it? Hmm...

• 
  @RandalamoLukhwareni3 күн бұрын

  Thanks for the help you helped me pass my assignment for creating glow in the dark objects 😊😊😊

• 
  @ChristopherUlrich3 күн бұрын

  This was really helpful - I did the toothpick trick on 4 holes for the wallmount for a 150 pound teaching monitor and they went in great and nice and snug. Thanks so much!

• 
  @kanibist83304 күн бұрын

  I was watching this hoping I could use the same method on a metal fence post lol. My hopes were dashed the second you pulled out the heat gun. Nice technique for pvc though.

• 
  @Eric-to5zj4 күн бұрын

  Make and patent a fan with this.

• 
  @korrige14 күн бұрын

  Thank Sir for explaining these method in such detailed..looking forward to your videos.

• 
  @KennysClackyGarage4 күн бұрын

  THANK YOU for posting these videos. I was thinking about a similar setup and this just showed me that i works👍🏻 great stuff, thank you for sharing.

• 
  @baqirrezai6964 күн бұрын

  Hello i am your member now.

• 
  @yangenduan28264 күн бұрын

  Excellent presentation

• 
  @jackwei28494 күн бұрын

  so smart

• 
  @brhicks794 күн бұрын

  Great simple explanation

• 
  @marknelson98194 күн бұрын

  Are people buying this fake crap or are they generating revenue off people watching these fake videos? Watch the end of video he slips of pedals and the pump keeps working.

• 
  @stevemjimenez4 күн бұрын

  If that is freshly applied oil, that is not an oil stain. There's a big difference between the two

• 
  @jimmayors23154 күн бұрын

  Does the rubbing alcohol neutralize the vinegar? I thought the vinegar neutralizes the battery acid, so the alcohol seems strange. I also thought baking soda neutralizes the vinegar.

• 
  @robertverburg14814 күн бұрын

  You need a new service up grade You can't repair that mess

• 
  @Linn7814 күн бұрын

  made me want to buy a magnet bar

• 
  @JohnSmith-dh3kx4 күн бұрын

  What's the relationship between the oxygen level and the air/fuel ratio?

• 
  @Stupidplaceholdername4 күн бұрын

  Imagine they would add a giant version of this on airplanes and make them fly without any fuel

• 
  @TAGUPNBLUE4 күн бұрын

  Wire nuts are the best hands down

• 
  @rickraub54484 күн бұрын

  Perfect. Thank you!

• 
  @georgecopley34034 күн бұрын

  I worked with PVC pipe as a gas mains layer and that is not the correct or easy way to do it, just cut your pipe glue the tee piece on one end let it set then glue the other end of the pipe and the other end of the tee piece and use 2 crow bars to force the both ends of the pipe in the same direction and then when lined up they will snap into place and that way you do not compromise the integrity of the pipe by softning it up, especialy if it is high pressure pipe

• 
  @jonathanwilliams92835 күн бұрын

  Not enuf Info.what do you use for attachment ? Placement of screws etc. Trash.

• 
  @electronicsNmore4 күн бұрын

  The only thing that's trash are viewers like you that think they're entitled to this information. If you actually watched the video, you would have more than enough information.

• 
  @lickalittle5 күн бұрын

  I was looking for information on the battery package, but all I've learned is it's made out of 18650 cells but not how many and or in series or parallel, I have 4 of the E330 cameras and they must be plugged I'm all the time but if I build a identical style eufy battery with a separate solar panel I'm golden, I have plenty of new parts, I've even tried asking anker and all I got was crickets 😂 I'll just have to dissect one of my own units 😮😊 all in the name of me 🤣👍

• 
  @ericsims60605 күн бұрын

  great video!!!!

• 
  @TinaMarieDerossett-lv8nv5 күн бұрын

  How much will one of them cost, let me know.

• 
  @thomascalabro20515 күн бұрын

  If the car overheated obviously there was something wrong with it it wasn't just running the air conditioner