How to make A Leather Cowboy Hat
Тәжірибелік нұсқаулар және стиль
I've been paying Red Dead Redemption 2 for a few weeks, and no need to say that I love the game. So it was just a matter of time before I try and make something inspired by the game. This week, I decided to finally get to it and make Arthur Morgan's hat.
I used 2.4mm/6oz vegetable tanned leather, dyed it black with alcohol based leather dye and applied two coats of neatsfoot oil . I really like how it turned out, and I hope you'll like the build.
If you have any question, leave them in the comments, I'll do my best to answer them all. Till next week, keep making and thanks for watching!
If you want to support my work, you can visit : / theredsmith
Musics : Soft Western Guitar 20 by Anders Ekengren (Epidemicsound.com)
You can also visit my online shop and order some goodies and small items. Go to my website : www.theredsmith.com
Find me on
Facebook : / the-redsmith. .
Instagram : / the_redsmith
Twitter : / the_redsmithn
Check some of my other videos :
Arthur Morgan's Holsters & Hat - Red Dead Redemption: • Making Arthur Morgan's...
Putting A Handle On My Branding Iron - Metalworking & Woodworking: • Putting A Handle On My...
Making Hiccup's Leather Helmet From How To Train Your Dragon: The Hidden World: • Making Hiccup's Leathe...
Making A Gold Leaf Picture Frame - Woodworking: • Making A Gold Leaf Pic...
How To Make Boromir's Leather Vambraces / Arm Guard - Lord Of The Ring: • Lord Of The Rings - Ho...
How To Make A Minimalist Leather Card Holder / Minimalist Leather Wallet - Leatherworking: • How To Make A Leather ...
How To Make A Viking Double Headed Battle Axe: • How To Make A Double H...
DIY - Making A Leather Watch Cuff / Band: • DIY - Making A Leather...
Antique Telescope Restoration: • Antique Telescope Rest...
Little Forge Remodel: • Little Forge Remodel -...
Hand Forged Naginata - Dirty Smith Zombie Apocalypse Weapon Challenge 2018: • How To Forge A Naginat...
Diresta Blacksmithing Class With Rory May aka Dirty Smith: • Diresta Blacksmithing ...
Two French Cross Peen Hammers Restoration - Old Rusty Hammer Restoration : • Two French Cross Peen ...
Damascus Plywood Sword : • Damascus Plywood Sword...
Leather Round Tool Box / Round Leather Saddlebag for the "Spirit of Collaboration" : • Leather Round Tool Bag...
Hand Forged Blacksmith Knife: • Forging A Blacksmith K...
How to Make A Leather Pirate Treasure Map / World Map For Skully - Leatherworking : • How to Make A Leather ...
Vintage Drill Press Restoration : • Vintage Drill Press Re...
Making A Viking Bearded Axe (Skeggox) From An Old Axe: • Making A Viking Bearde...
Thanks for watching!!
#reddeadredemtion2 #ArthurMorgan #leathercraft #Leatherwork #RedSmith
Пікірлер: 542
Beautiful work. Rest In Peace Arthur Morgan!
@RedSmith
4 жыл бұрын
Thanks a lot :)
@Kaleb_x
3 жыл бұрын
I’m sure black lung is resting all right 😳
@imadyingjellybean3386
3 жыл бұрын
He hasn't died
@memerbruh3481
3 жыл бұрын
@@imadyingjellybean3386 he did, in the game
@imadyingjellybean3386
3 жыл бұрын
@@memerbruh3481 when :/ I'm on chapter 2
This is what l wanted. No other leather hat making videos needed.
@RedSmith
7 ай бұрын
Thank you! Comments like yours keep the motivation high!
Damn right when I decided that I have my hands in too many different things and leather had to take a back seat to welding, blacksmithing, bladesmithing, woodworking, and making vinyl decals. Largely because of with the previous hobbies my hands and shop never get clean enough to do leather work. You go and post this. Now I want to make one.
@RedSmith
5 жыл бұрын
Haha, I know the problem, too many things I wanna build, not enough time. I tend to keep the leatherworking projects for winter, when it's too cold outside to be in the forge or in the shop woodworking ;)
@jamesmarseilles8301
4 жыл бұрын
Brother... You're statement hit me right in the feelers.
No gimmicks, no bullshit. Just a straight video showing a leather hat made. Good stuff.
@RedSmith
3 жыл бұрын
Thanks a lot! Much appreciated!
Fantastic audio editing yet again!! I'm guessing that shaping the hat took a really long time to do! And it was such a good idea to start the braid on that ring! I think I'm going to borrow that tip! And that square end braid knot thing you did looks neat! Beautiful job!
@RedSmith
5 жыл бұрын
Thnak you very much!! You can borrow any idea you like😊 Shaping the hat wasn't the hardest part. Making the pattern was a nightmare😊
@FigmentsMade
5 жыл бұрын
@@RedSmith Thank you! Oh wow. For some reason I assumed you got the pattern from somewhere. I can't imagine how hard that was! You get many gold stars for that!
great video... it's my dream to have that kind of leather cowboy hat... greetings from the philippines...
@RedSmith
5 жыл бұрын
Thanks a lot Michael! I appreciate it. Cheers from France!
@s.c.pfoundation3559
3 жыл бұрын
Love the hat
This is a great quality video. The hat is great as well, but I'd also like to compliment you on the watchability and pace of your video. It was just perfect.
@RedSmith
3 жыл бұрын
Thank you very much, I really appreciate your kind words
Merci Red pour cette réalisation, ce chapeau est terrible et quelle maîtrise des gestes!! Un vrai plaisir pour les yeux.
@RedSmith
5 жыл бұрын
Merci Patrice !! C'est très gentil !
Beautiful work. That hat looks quite stunning!!
@RedSmith
3 жыл бұрын
Thank you very much Michael !
wowzers ! man that is superb workman's ship ! looks really good, my aunt plays red dead redemption 2 as well, she really likes that game. . . alot. awesome video !! 2000 thumbs up !!
@RedSmith
5 жыл бұрын
Thanks a lot! Glad you liked it :)
You continue to impress me! Excellent work!
@RedSmith
5 жыл бұрын
Thanks a lot Rasmus!! I appreciate it😊
That is a proper cowboy hat - great job!
@RedSmith
5 жыл бұрын
Thank you very much!! :)
straight up underrated content💯 I looked it up on ur website and it seems way off my budget, I want to make my own but I'm scared that I might ruin it and waste all the materials.. btw I read some of these comments and it seems ur working on some patterns for this hat that I'd absolutely love to buy, when can I expect them on ur website cuz its been a few months since u last said they're gonna be coming soon... hope I wasn't bothering u
@RedSmith
3 жыл бұрын
Thanks a lot. Making it right takes a lot of time. Especillay when it's for everyone to be able to make it right on the first time without wasting any material. Unfortunately I have a lot of work these days, but it will come.
@daniyalyousuf3635
3 жыл бұрын
@@RedSmith I might take the plans to a craftsman so that it's perfect... thanks for the reply and hope to see the plans soon :)
really nice, good work
@RedSmith
5 жыл бұрын
Thanks a lot! :)
Amazing talent! Inspires me to make myself one! Thanks for a great tutorial!
@RedSmith
4 жыл бұрын
Thank you very much!! My job is done then😉
Beautiful workmanship
@RedSmith
Жыл бұрын
Thank you very much!
Whoa Red beautiful and incredible craftsmanship as always. Take Care
@RedSmith
5 жыл бұрын
Than you very much Thom! Take care! Cheers from France
Absolutely beautiful!! If you taught a class I would definitely sign up
@RedSmith
3 жыл бұрын
Thank you! I will probably teach classes in the future online :)
Hats off to you red 😉 that's some fabulous leather work 👍
@RedSmith
5 жыл бұрын
Thanks a lot Alan! Much appreciated :)
You're a true artist,sir ! God bless!
@RedSmith
4 жыл бұрын
Thank you very much!!
Love this, would love to make it.
@RedSmith
5 жыл бұрын
Thanks Brian! Please give it a try😊
Awesome hat! Good work!😉
@RedSmith
5 жыл бұрын
Thank you!!
brother, that was badass. The only thing im not 100% on was the rim or lack of trim but damn man thats one fine ass hat. awesome work
@RedSmith
5 жыл бұрын
Thank you!!
Fantastic work G.
@RedSmith
5 жыл бұрын
Thanks a lot Steve!!
Me gustó el acabado de tu trabajo es muy limpio y profesional!!!''
@RedSmith
5 жыл бұрын
Muchas gracias por tu apoyo
For those who may be wondering, this is likely 2mm vegetable tanned leather. If you try to use other types of leather, wetting it wont make it hold it's shape the same way it does for vegetable tanned leather.
@RedSmith
3 жыл бұрын
2.5mm, but yes, you are correct. Chrome tanned leather wouldn't work for that. Thanks for watching
@ethansmith8813
6 ай бұрын
I use 4-6 ounce tooling leather for mine. Hard. But makes it really sturdy. Shaping is a process though
It looks so comfy 😍
@RedSmith
5 жыл бұрын
Thanks Al!! ❤🖤
Arthur: what about the MUNEH John
@RedSmith
4 жыл бұрын
:)
That was incredible 🙌
@RedSmith
4 жыл бұрын
Thanks a lot!!
very nicely made, might have a go at makin one, thanks
@RedSmith
3 жыл бұрын
Thanks a lot! Please do!
Awesome looking hat. I want one.
@RedSmith
2 жыл бұрын
Thanks mate!
That Sir...Is excellent work..
@RedSmith
5 жыл бұрын
Thank you very much Mike!!
Brilliant Red!!! That turned out crazy cool! What was the finish you applied to the hat at the end, was that something like Resolene or just more Neat's foot oil or something else entirely?
@RedSmith
5 жыл бұрын
Thank you!! It's just leather neatsfoot oil. It gives it a little shine, make it softer to the touch and unifies the color of the dye.
@sandrohumberto
3 жыл бұрын
@@RedSmith Nice job ! What kind of dye did you use to paint ? Is the template available? TY
@RedSmith
3 жыл бұрын
@@sandrohumberto Thanks! I used leather dye. The template will be available soon on my website.
Time to relax,and enjoy the world of Red Smith,thank you big G ;) hug my friend
@RedSmith
5 жыл бұрын
Enjoy ;) Thanks a lot my friend!
Excellent work, I also do leatherwork myself and have been thinking about making Arthur's hat! Did you use some template for it?
@RedSmith
5 жыл бұрын
Thank you very much! I made my own template, for my head size. But I'm sure you can find templates somewhere.
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
Fabuloso trabalho parabéns ♡♡♡♡
@RedSmith
2 жыл бұрын
Muito obrigado!
GOOD WORK !!!
@RedSmith
5 жыл бұрын
Thank you!!
Good work dude! You videos always good for me :)
@RedSmith
5 жыл бұрын
Thank you very much! I appreciate it!
Thanks for including the leather weight, most project videos do not. Nice hat!
@RedSmith
11 ай бұрын
Pleasure! Thanks for watching!
That is just phenomenal! Ever thought of making it worn like Arthur's?
@RedSmith
5 жыл бұрын
Thanks a lot! I tought it would worn out with time
@JaneValentine007
5 жыл бұрын
@@RedSmith Oh, alright! Cool! Planning to make one myself and have it worn thats why♡ Keep on doing what you love!~♡
@ethansmith8813
4 жыл бұрын
I found that getting it to that black fade to brown look is done by dying it dark brown. Then using 2 coats of black. Use fiebrings leather sheen to finish it as it removes a bit of dye. And there you have it
@JaneValentine007
4 жыл бұрын
@@ethansmith8813 Oh lord I forgot to share it when I had it done, its not the best but I did end up being this for Halloween long ago! cdn.discordapp.com/attachments/618211383779000331/639950250064347136/20191031_193644-1.png I imagine the pros to wince at how bad this is..
Wow really nice! just a practical question: is it waterproof in the junction ? the color changing is so amazing from leather to a nice brown then a deep blue and to finish a massiv black! awesome!
@RedSmith
5 жыл бұрын
Thanks a lot. Yes it is. The stitching is very tight and the oil helps :)
@MathieuDAVID
5 жыл бұрын
@@RedSmith merci pour les details technique!
@RedSmith
5 жыл бұрын
@@MathieuDAVID De rien
Great work man, i am trying to do one for myself and you are the only person that i found that does it with pure leather inside the hat and outside. What type of leather is this?
@RedSmith
Жыл бұрын
Thanks Marcos. I used 2.3mm thick vegetable tanned leather. Easy to find and perfect for this kind of project. Thanks for watching
Absolutely beautiful! You make it look so easy to build. One question: How did you determine what size to make the hat?
@RedSmith
5 жыл бұрын
Thank you Donna. It's not that hard. Making the pattern is :) The inner diameter of the rim is more or less the size of the hat. It depends on how you sew the rim to it.
@crispyjack6835
2 жыл бұрын
@@RedSmith no they aren’t.
@evanjames8782
2 жыл бұрын
@@RedSmith says not available :(
@RedSmith
2 жыл бұрын
I'm remaking them so the hat is easier to make. Will be soon available again.
@RedSmith
2 жыл бұрын
I'm remaking them so the hat is easier to make. Will be soon available again.
Amazing, mate!!!
@RedSmith
2 жыл бұрын
Thanks a lot Partner!
Killing it!
@RedSmith
5 жыл бұрын
Thanks Brian!
Great video hope to make one one day
@RedSmith
4 жыл бұрын
Thank you! I hope you will!!
I was genuinely surprised that you didn't do anything to the brim. But, it's a gorgeous hat.
@RedSmith
5 жыл бұрын
It's just an aesthetic choice. You can add a piece of leather all around but I thought it looked more like the one in the game without it :) Thanks for watching!
so great video and project👍👍👍
@RedSmith
5 жыл бұрын
Thanks a lot my friend!!
The most perfect work i ever saw Fantastic
@RedSmith
3 жыл бұрын
Thank you very much!!
@tfamine1
3 жыл бұрын
@@RedSmith u welcom
Incredible video!! Would you ever consider doing a video of John’s hat from Red Dead 1?
@RedSmith
4 жыл бұрын
Thank you very much. Yes, it's on my list :)
That is a fine hat mister, I wish I can have that.
@RedSmith
5 жыл бұрын
Thanks a lot! You can if you have the budget for it, or you can make you own :)
just remember to put in a sweatband and to seal the inside of the hat with proper products, otherwise you'll find a nice black line on your forehead as soon as you wear for more than 3 minutes
@RedSmith
3 жыл бұрын
No need for that. When properly done, leather dye doesn't bleed. It would just ad confort. Thanks for watching.
:D now *that's* a hat!
@RedSmith
5 жыл бұрын
Thanks a lot Allen :)
Perfect!!! (From Russia)🤠👍
@RedSmith
4 жыл бұрын
Thank you!! (From France)😊👍
travail fantastique mon ami
@RedSmith
5 жыл бұрын
Merci mon ami !!
Enjoyed revisiting the process. Love that hat!
@RedSmith
5 жыл бұрын
Thank you Sir!!
Great video! I made one of these a few years ago, but it is about a quarter of an inch too tight. Any suggestions for re-sizing?
@RedSmith
5 жыл бұрын
Thank you! You can make a jig with a round piece of wood and two screws. Wet the hat and put the jig in it, then unscrew the jig to enlarge the hat. I've seen a video on youtube about that a while ago :) Hope it helps
@dlewis2446
5 жыл бұрын
or just use the old hat on knee and pull to stretch trick,works a treat...
Great job.
@RedSmith
3 жыл бұрын
Thanks!
@whatchadoinwhatchadoin9415
3 жыл бұрын
That’s the one I’m going to make.
@RedSmith
3 жыл бұрын
Great!
How do you know how big to make the pieces of leather for your hat? I have the circumference of the head that I need it to be for but I'm not sure how wide to make the brim, how tall to make the top, etc. Its being made for a 12' skeleton, the circumference is 44.5".
@RedSmith
9 ай бұрын
Trial and error with cardboard same thickness of leather.
👌🏼❤️Excelente video me encantó, ojalá tuviera el sombrero de Arthur Morgan o algo paresido, ese sombrero se ve muy desgastado y casero pero se ve muy rudo con el, o por lo menos desearía tener sombrero 😂🤪
@RedSmith
4 жыл бұрын
Puedes probar y hacer la tuya :) ¡Gracias por mirar!
I'm want to see a million subscribers on this channel
@RedSmith
5 жыл бұрын
Thank you!! May the KZread gods hear you ;)
Excelente! me gustó tu video, es posible que publiques el patrón para hacer el sombrero? Gracias desde ya!
@RedSmith
3 жыл бұрын
¡Gracias! ¡El patrón estará disponible en mi sitio web pronto! ¡Gracias por ver!
Nice job, I wanna make something similar for myself. Ive made a template out of thin cardboard to fit my head (I take a 23.5 inch cicumference hat to fit the way I want it). I have a question about the process. Does it matter if I dye the leather before or after assembly? I was thinking of using beeswax on the rough side for sweat protection and to seal up the rough leather, do you think its a good idea? Im gonna use a Pro Dye in a Show Brown for mine.
@RedSmith
5 жыл бұрын
Thanks a lot! You can dye the leather before assembly, but don't forget the leather will shrink a little bit. I usually dye before assembly as well. You can use wax or soap and burnish the edges, but the best is to use tragacanth gum. I hope it helps :)
@craigells4151
5 жыл бұрын
I just went for it and it turned out pretty good. Its a little different than your design, narrower brim and added wire for a more rigid edge. I have yet to dye it or treat it but Im pleased with it for my first project with leather.
@RedSmith
5 жыл бұрын
@@craigells4151 well done!!😊
What oz leather is this made of? Edit: never mind i just wasn’t paying attention to the description.
@RedSmith
5 жыл бұрын
It happens.😊 Thanks for watching.
gooooooooooooooooooooooood job
@RedSmith
5 жыл бұрын
Thanks a lot!!!
Did you use 8-10 ounce leather and how do i go about measuring my head so that it fits comfortable?
@RedSmith
2 жыл бұрын
I used 5-6oz veg tan leather. I found it to give the best results for a hat. If you measure it around your head, just above the eyebrows, it should fit perfectly.
This video inspired me to make 2 of my own. This is kinda fun
@RedSmith
4 жыл бұрын
That's great !! It is indeed :)
@ethansmith8813
3 жыл бұрын
Im on number 4 now. Enjoying it greatly do you have any advice on finding making hat templates to improve my work?
Awesome video. May I ask where you got the pattern for the shapes/parts you needed to cut out?
@RedSmith
5 жыл бұрын
Thanks a lot. I spent hours making my own :)
@cakecakeham5823
5 жыл бұрын
@@RedSmith I'm trying to learn Pattern making at the moment, the maths really escapes me XD
@RedSmith
5 жыл бұрын
@@cakecakeham5823 Ellipses are cery hard to make. Trial and error is a good way to finally make it😊
🔥🔥🔥
@RedSmith
3 жыл бұрын
Thank you!!
This is GREAT work! Do you happen to sell patterns? I have the materials I need to make it (for personal use - I have no intention to sell), but I don't have a good pattern and this one is wonderful!
@RedSmith
4 жыл бұрын
Thank you very much! I'm redoing my website right now to add all my patterns. It should be ready in a few days :) Thanks for watching!!
@araface7487
4 жыл бұрын
@@RedSmith I'll be sure to check it out! Quick additional question... What length of lace did you use to braid the cord that goes around the hat?
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
My grandfather gave me a black stetson that looks just like arthurs. I wear it all the time but i want to get the hat wrap that arthur has but i cant figure out what it is. It looks like a rope sometimes but the part that sticks off the back of the hat in the game has some stiffness to it. Its almost like a vine but then it looks like the thicker part of the wrap was twisted around a smaller vine. Its hard to tell but i may go out in the woods and see if i can find something close to it.
@RedSmith
5 жыл бұрын
It's brown leather strips braided together. A 4 strand round braiding to be precise. Thanks for watching.
I thought that was pretty neat 🤠💖✨✨✨✨
@RedSmith
4 жыл бұрын
Thank you!
I've actually been trying to find this hat and all I find is these cheap looking versions of it. Is possible to order that same hat from you? I actually aim to wear it quite often. P.S I am in the U.S
@RedSmith
4 жыл бұрын
Hey Casey yes I make and sell them. And I ship to the US so no problem. But leather is expensive. You can contact me so we can discuss details theredsmith@hotmail.com
Awesome build! Is there any way to get the templates, or measurements of the pieces you used to build the hat?
@RedSmith
4 жыл бұрын
Thank you Joe. The template will be available to purchase on my website as soon as the pdf file is ready. I'm working on it :)
@joewilshire9095
4 жыл бұрын
@@RedSmith awesome! Thanks, I look forward to it!
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
Hey i love it !! I love it 👌 Can you please tell me the exact size of the hat pattern. I mean the size of all shapes (small, large and rectangular circles)
@RedSmith
2 жыл бұрын
The pattern will be available on my website as soon as I have time to finish it.
if you cant use all that cutting, and hard stuff just buy a Bullhide Cowboy hat, buy unwashable spray paint, spray it all top and bottom let it dry, get some rope tie it around the hat and make sure there are 2 lines sticking out and boom you got Arthur Morgan's hat! (may Arthur Rest In Peace...)
@RedSmith
4 жыл бұрын
Yeah you can buy stuff and paint them. But that's not the point of the video.
@A-Bomb_1317
4 жыл бұрын
@@RedSmith I know just telling other people
@RedSmith
4 жыл бұрын
I think they know.
I plan on making this hat out of leather I made myself I want it to be a dark brown color with a bit of a shine on it just like that one what do you recommend? Love the video btw👍
@RedSmith
4 жыл бұрын
Sounds great! I recommend a brown leather dye (water based) and the Eco-Flo super Shene for finish :) Good luck with your build and thanks for watching!
makes a musketeer hat, please!! Hello from Brazil
@RedSmith
5 жыл бұрын
I will. One day! ;) Cheers from France
прекрасно, друг
@RedSmith
4 жыл бұрын
Спасибо!
Very nice! Is there a pattern? I tried clicking a link in one of the comments below but the URL is not active. Thanks @Red Smith
@RedSmith
2 жыл бұрын
Thanks. There is no pattern for now but it will come soon. For now, you can find the hat here: www.theredsmith.com/store Thanks for watching.
Great video. Question: How much did the leather cost you? I want to give this build a try.
@RedSmith
4 жыл бұрын
Thank you. It depends on the shops. In my country it's very expensive.
@maxconfusion9948
4 жыл бұрын
@@RedSmith Ok .thanks for telling me. Also thanks for taking time to reply :)
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
@esauce3850
Жыл бұрын
@@RedSmith hey I clicked the link to see the pattern because I also wanted to make my own hat but it says this page doesn’t exist. Would you mind possibly emailing me the template/pattern?
I really wish I had one. Did you know that the ropes on Australian outbacks, where made to keep flies and bugs away?
@RedSmith
Жыл бұрын
I had no idea. Thanks for the info :)
Any chance on having a tutorial on making the pattern it looks asymmetrical and like the most challenging thing in the whole build amazing hat btw
@RedSmith
4 жыл бұрын
The pattern will be available on my website as soon as I finish it. For the tutorial, I will consider it. Thanks for watching.
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
Nice
@RedSmith
Жыл бұрын
Thanks
I think Arthur would have used a beaver hat. Leather is a pretty new concept
@RedSmith
5 жыл бұрын
Not really new...and that's the one he has in the game
I love this hat, are you gonna put it on your website soon?
@RedSmith
5 жыл бұрын
Thanks a lot. I will as soon as I have time to do it. Would you be interested in purchasing one ?
@toad_x
5 жыл бұрын
The Redsmith omg yes, that hat is amazing
@RedSmith
5 жыл бұрын
@@toad_x Thanks a lot😊 Send me a email at theredsmith@hotmail.com and we can discuss it
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
@toad_x
4 жыл бұрын
Red Smith excellent! Thank you!
Could you make a campaign hat out of leather? That would be challenging and awesome!
@RedSmith
2 жыл бұрын
As soon as I have a client for one, I'll give it a try ;)
@momsberettas9576
2 жыл бұрын
You don't need a client you have a KZread channel. That's the reason to make it.
@RedSmith
2 жыл бұрын
@@momsberettas9576 On my channel I make what I need or want. For custom request/order, I need a client. That's what every maker does on KZread. We shoot videos about the stuff we make for us or clients. Otherwise I would just do clickbait videos.
Ameiiii
@RedSmith
4 жыл бұрын
:)
Hey, fantastic video.. Looks like you grabbed the hat out of the game! Would it be possible to buy a copy of the plans from you? Thanks!
@RedSmith
5 жыл бұрын
THank you very much! The pdf pattern is not finished yet, but you can already order a hat. Thanks for watching!
@RedSmith
4 жыл бұрын
The patterns are now available on my website if you're interested. www.theredsmith.com/online-shop
I have some tanned leather that is already the correct color for the hat. However, the leather is very soft and flimsy. Is there any way that I can stiffen it so that the color and texture will not be ruined? I do not have a whole lot of experience with leather btw
@RedSmith
4 жыл бұрын
You could glue a second layer underneath to make it stronger or just apply leather hardener. I used it a couple of times and it works very well.
I'm thinking of making this for a cosplay. How much leather did you use for this project and do you have any pointers for someone starting out?
@RedSmith
Жыл бұрын
Make a pattern out of cardboard first. It will help you with the whole process.
👏👏👏👏👏👏👏👏
@RedSmith
4 жыл бұрын
Thank you very much!!
Hey, man. This is an amazing job!!! Unfortunately I can not find a link to the templates and please tell me what chemical processing tools you used in this hat))) Please help me.
@RedSmith
4 жыл бұрын
Hey man, I just sent your an email. Thanks for watching!
@ethansmith8813
4 жыл бұрын
Is the pattern still up? Id love to purchase a few myself
@RedSmith
4 жыл бұрын
@@ethansmith8813 I'm redesigning my entire website and making a better / easier pattern. Will be up soon :)
@ethansmith8813
4 жыл бұрын
That's awesome. The website has always been really good
We need MoNeH!
@RedSmith
5 жыл бұрын
Indeed ;)
This video is wonderful and I would enjoy have the hat pattern for make a white cotton version. If it's possibile, please.
@RedSmith
11 ай бұрын
Thank you, I truly appreciate your kind words. I'm currently working on a better version of the pattern, to make the hat easier to make. I'll let you know when it's ready. Thanks for watching!
@jackspancakes315
27 күн бұрын
@@RedSmithHello, the pattern isn't availible in your store anymore. Is it coming back? I would love to recreate this myself
@RedSmith
26 күн бұрын
@@jackspancakes315 It will come back soon. Thanks for watching!
C'est du très beau boulot, mais on est d'accord, c'est le même chapeau que dans la dernière vidéo ?
@RedSmith
5 жыл бұрын
Merci ! Oui, c'est le même :) J'ai séparé la vidéo en deux parties. Certaines personnes ne veulent pas voir d'intro ou deux fabrications dans la même vidéo.
hey there. i have tanned some deer skin & want to try to make a similar hat. where can I find the tools you used? would seek them out myself but i have no idea what each tool is called. TIA
@RedSmith
4 жыл бұрын
Hello. I have few tutorials on leatherworking on Instructables.com where I list all the tools I use. But if you buy a leatherworking beginner tool kit you should get everything you need :) Thanks for watching!
Where can I get the template? I'm interested to make one hat for me.
@RedSmith
3 жыл бұрын
The template will be on my website soon. Thanks for watching
I want to know where you got your tools that you used on the video, the spreadsheets only shows some saws and the tint. and how about measurements?
@RedSmith
5 жыл бұрын
I bought all my leather working tools in Tokyo and made my own pattern. Thanks for watching.
@RedSmith
4 жыл бұрын
The template / pattern is now available on my website: www.theredsmith.com/online-shop
If I’m interested in learning leather work where do you recommend I start?
@RedSmith
5 жыл бұрын
I recommend making smalls items like a bracer or a card holder and see if you like it. You can find beginner kitd for cheap.
@graceskate
5 жыл бұрын
The Redsmith I’ll try that thank you : )
@RedSmith
5 жыл бұрын
@@graceskate Please do😊
@Solarius318
5 жыл бұрын
If you live near a tandy leather store they often hold beginner project classes and there usually pretty inexpensive, and have all the tools you'll need. You can also go to a saddle or leather shop and ask to observe for a bit. There usually willing to help expand the craft and impart alot of knowledge.