Finally. I can make the Yankee with no brim

@nydeity9100

3 жыл бұрын

That's a sin

@Giordo45

2 жыл бұрын

Yes

@yusufozdemir11ylonce3

2 жыл бұрын

i will make a brim with no yankee

@yusufozdemir11ylonce3

2 жыл бұрын

Or even better, no yankee no brim

@mandeepkaurbhandaall4729

Ай бұрын

gdsdfghhgzzx❤

Great tutorial! Inspired AND motivated me! I searched the internet for a cute but not too girly and not too masculine n cap to no avail! I do have plenty of fabric that I now know what to do with! Thank you!

Thank you for the video. I know how time consuming it is to make a quality video. This is clear, well organized, informative, wonderfully edited, great tutorial, without being longer than necessary. If I may, one slight detail. "Access" - means the ability to or means of approaching or entering a place. "Excess" - means extra or more than necessary. This is only meant to help with future videos, and to improve already excellent content.

@genialeducationinstitute9870

2 жыл бұрын

😊😊aà

@genialeducationinstitute9870

2 жыл бұрын

Q

@everydayvacaytaj

8 ай бұрын

Oh good, I wasn't the only one bothered by that

I followed this to make my first hat. A couple tips for anyone making one and a couple tips for the video creators (I know its an older video) for future If you're making this: 1) be sure to use a thicker material like canvas. If you use a lighter fabric like a full cotton, you'll want to thicken it up with a fusible liner or the whole thing will seem a bit flimsy. 2) don't use the double needle. Its not worth the time to set it up and most machines will be a hassle to make it work. I almost broke mine twice because my machine just simply wasn't tuned for a double needle set-up. Instead, just straight stitch one side and then the other. If you take your time, it looks much cleaner (and involves less switching set-ups) than using the double needle. 3) don't do the sweatband the way the show. Instead, sew the sweatband to your size strip/raw edge and then fold it over. This way it eliminates the outer stitching and gives a cleaner look. It gets harder at the brim, so if needed, you could do just the brim section as shown in the video. Stick with it. It was very frustrating at times but the final product is well worth it if you take your time and really get the fine details right. Tips for ProperFit: 1) this tutorial is ok, but its clear after watching other videos of yours that you take audio from other tutorials of yours and slap it on different footage and over time the overall quality of the tutorial tends to suffer because its not video specific and is harder to follow 2) get a few different camera angles, especially on complex parts like the brim. You rush through arguably the hardest part of the project and leave the viewer in the dust. Get some alternative camera angles and show the actual spot you should be stitching to avoid confusion, especially if you use generic audio voiceovers. 3) you don't need to be subtle about the fact that you run CapSupplyCo and act as if it's a different company that you bought from. You are that company, lean into it. People will appreciate the transparency and actually probably be more likely to buy from you. I was hesitant because the way you spoke about them as if you weren't the same actually sketched me out because of how similar you were. It just seems...odd. I appreciate the tutorial, it really was helpful, but just a couple tips for future so that you can make better content

Thank you! I find it very enjoyable to watch :)

I highly recommend Prym pliers for the eyelets. Easy use, high quality and pretty cheap considering how long they'll last. The pliers also come with a fitting that cuts the perfect size hole for the eyelet, and they can also install the whole range of snaps, eyelets, press studs and poppers.

The goat of sewing

yo this was INSANELY DOPE!!

Hey, I loved! I have this machine at home and I can use now. In Brazil is very difficult to find videos like this. Thanks a lot! See u :d

New subscriber! Love the video... keep them coming please!

Thank you for this! I was finally able to find wholesale brim inserts

@nohmygawd7855

2 жыл бұрын

Don't suppose it was in the UK was it???

Love the POGO in the background

New subscriber here. Love your neat craft. 🤙🏼✂️

I would put the strap a bit lower at the rear so it stays better on your head. Im looking into making one of these "Russian Gorka caps" in a bright nice fabric. I really like military clothing and satchels and backpacks. They are tested through time, and can take a beating too. I bought a lot of cheap bags to see which i liked the best and now i plan to recreate the bag in a bright color with a pattern. I already made a "veshmeshok", i really like the bag, it came out perfect! Greetings, Jeff

You're the man!

Hey champion... Great job... Congratulations to u

That is a wild sowing maschine

You're amazing bro

Nice hat Creation, 👍💐🤶👒

Great video

Eu amo esse bone 5 panel

🔥This Super Dope right here... I gotta make a hat now !!! lol

That was great! ty!

Cool job, nice music

If I wanted to make the hat a little smaller, could I just increase the seam allowance to about .5" instead of .25"? Have you ever tried cutting the outside edge of the brim down a bit? Thanks for a great tutorial.

Great video! Thank you! Quick question? On a standard sewing machine, what needles are you using to go through that brim? Or on a brim that may be a little thicker? And what foot? Thanks! Excited to try this! Oh, and thread! 🙏🏼

Super amazing! You spent a lot of your time making just one hat. How much do you sell these for and still pay for supplies and your time?

What is that attachment that helps guide the edge when sewing on the side panels?

amazing

Bravo

Estupenda👍

Nice TSG hoodie

Curious what the name of your seam guide is or if you have a link? I've only seen magnetic ones you need to pick up and adjust yourself - that turny adjuster looks super nifty

What type of fabric are you using? Thanks in advance. Btw, great vid, clear and very specific.

Is there any chance you can show us how to make a flat cap or at least add a flat cap of some type to your store?

Hi. I really like the pattern but I always find myself fighting with the brim when sewing it on, any tips?

Amazing

@Sunowork

3 жыл бұрын

Super 👍🖐

please make a vedio about hat cap pattern

Love the video... do you have to have a heavy duty machine to make hats like this? Thanks

Nice

What kind of needles did you use to sew on the brim?

Please, do a patern tutorial. Thank you.

Do you have a tutorial on how to make a New Era Type Hat

Great.

damn that's cool!

What size/type of needle do you use to sew through the brim to make the brim lines?

Where to I get the adjustable guide for the brim?

Would it help to use pinking sheers when cutting excess brim fabric?

Ty i need this for school

@Godfreyalipio10

8 ай бұрын

Wym?

Sick Vid!

Cool👍👍👍👍

What needle do you use to sew thru the brim plastic?

Access fabric is crazy 😂

@properfitclothing where did you get the buckle for the back of the hat

i have a question. Isnt the brim a bit hard so sew on with a regular machine? or did you use a larger needle so it wouldnt break ?

Thank you for the video! I wanted to see if you can make some modifications. My son wears bilateral Ponto 3 hearing aids. These are supposed to secure onto a band that comes with the machines. He never could stand the band so I found a way to attach them to regular hats. I usually prefer trucker hats. I am looking for something with a trucker hat style like the one in this video but with the fabric of the hat coming down to the mastoideal bones behind the ears. The machines function best when on these bones. I would greatly appreciate your advise. My son is 3yo and has grown to love his hats. I just wish I could find one that gives him the best benefit from his hearing aids and are as awesome as he is. I usually have his personalized in some way but can never find one to fit right on the bones that are needed.

@VIV-Official

2 жыл бұрын

In my opinion, the best was to approach this would be to add fabric pieces to each side of the hat in the sweat band behind the ears.

Where can I find those vent buttons for the sides of the hat ?

Question how would you make a hat like that but for a bigger head? I want to make my own hats

Yooo bro what do u call that black cloth u put on front of the pannel

"this bit might be a little tricky" yeah fucken oath

Where do u buy side stripe from having problems putting on sweatband

How can you do this without the bias attachment? Is there another way to finish the interior seams?

Great tutorial ! How do I adjust the panels to make the hat "deeper". I like my hats to fit old school 2000 style, so that the brim goes down to my eyebrows. I dont like when hats sit on top of my head. Thanks for the help !

@mrmoop58

7 ай бұрын

I just cut apart a old goodwill that I like the fit to make my own pattern

Anyone know how to prevent seam puckering? Especially when connecting the side panels to the front/top panels

I have a very large head (61cm / 24in) - any tips on making the cap bigger?

@properfit clothing..what is the name of the industrial bias folder

Bro Can You Put The Links Of Everything That’s In This Video To Get The Stuff From

@properfitclothing is the capsupply co still up and running also where would you suggest a place that has leather and other materials for hat making..just your opinion bro

Hello how are you? I would like the : "5-Panel Camp Cap Pattern" to be available in the store to buy and download

Aku suka terimakasih ,

For the back arch, lets say you didnt want to use bias tape. Could you just cut out some denim in the same shape and use it? So its the same material.

@triplemoon69

5 жыл бұрын

yeah as long as you have taken care of the raw edges of the denim.

베리굿

I'd love to see music credits...

yooo does anyone know about that black fabric he put on front panel?

What is the model number from the singer machine?

Where did you buy the binding attachment that you taped on the machine? Also can’t find side strips on your website.

@triplemoon69

5 жыл бұрын

I found it on amazon www.amazon.com/gp/product/B07HH97GXL/ref=ox_sc_act_title_1?smid=A3OZ035ZVXNZLW&psc=1

Xin lỗi. Mình muốn biết bạn có bán khuôn mẫu giấy của 5 panel này ko

When you're attaching the brim to the hat, are you sewing into the brim itself or along that same seam that encloses the brim - the seam that you did with the zipper foot?

@Bonelafide

Жыл бұрын

Looks like they're sewing right along it.

Sir we can make all kinds of caps if you need worker let us know

Buen día gracias por tu valiosísima enseñanza . Te pido q enseñes cómo se hacen los moldes ya q aquí en Colombia es muy díficil el trabajo y hace mucho tiempo estoy desempleada y vi q puedo hacer las gorras con tu enseñanza e inisiar trabajando por mi cuenta . qui toda la gente las utiliza Gracias espero tu respues

@nelsonrodriguezmoreno722

6 ай бұрын

Ellos venden el patrón en su portal web

sorry if this is a dumb question but will a standard machine have trouble sewing threw the plastic brim material?

@gaborvaradi7946

5 жыл бұрын

Depends on the machine and your experience on what yours is capable of - but you could definitely go around the issue in some way. In the video it is no coincidence he went for the Singer Heavy Duty, but you will work it out on another with some creative thinking and patience.

anyone know where to get a good quality 5 panel hat template? Their website says 'out of stock' and I haven't received and email back from them yet.

for the size of the hat pattern, thanks

❤

Anyone tell me what zipper foot this is?

How can we get in touch with you directly?

very nice cap.- but i feel like the strap on the back was sewn a bit too high. But i appreciate the tutorial

what size of needle did you use?

How to download dad cap pattern?

Great video!! What material is the brim made of?

@lorrainewilliams7896

3 жыл бұрын

Honestly, it looks like something SoleTec sells. I am going with Peltex.

Where can I buy the brim cardboard or plastic?

@MattCupan

Жыл бұрын

Easiest thing to do is cut it out an old hat

@FreddyTurner

Жыл бұрын

I did that before. But thought there was dome place to buy them new And they come in my shapes and sizes

anyone know what size of bias tape they used?

A Dadcap with domestic machine! Please .

@ProperFitClothing

6 жыл бұрын

+Álvaro G coming next!

Pls can I get measurement of it

what is the name of this white ribbon?

How long took you to make this?

What about a cyclist hat? Like the one they use in tour de france?

very good video Could you tell me how to get the templates ?. Size, etc.

@cristianm2361

6 жыл бұрын

take a hat apart and use those existing patterns to create your own templates, cheers.

Where can i find the industrial attachment for the bias tape?

@MrBUGS713

5 жыл бұрын

Online or eBay or Joan's

Hey where can I get a bias tape maker like the one you all have

@chokskapta

Жыл бұрын

Amazon