I make custom kids pedal planes. A few years ago I started to do them in fiberglass. Needless to say I have been online a lot digging into the procesess of making a mold. YOUR video is the quickest one I have seen that just gets to the point. Thanks for this video. I have saved it for future reference.

@varneyrobert

2 ай бұрын

That sounds like a lot of fun, endless options on customizing for customers :)

Many thanks for this series, I'm sure it will help a lot of people. :)

So glad you guys are making these videos now. Keep them coming. 👍

@FiberglassSupply

3 жыл бұрын

Thanks! The next in this series is shot already, I think it will be edited next week and up the week after.

Really interested in this series of videos as im wanting to do similar. Can't wait to see the end perfect result after the bridging incident

thank you

Is there a way to make a left side part from right side part? (example, a left side panel into a right panel)

Good evening sir can you show to the next video how to mold bullet phase plug for speaker have an idea Thanks more power to your video Godbless.

Great vid! Thanks for sharing. Got a question though. Given the bondo and the item trim line(edge) gets fused together in the process of filling, how much trim line is left visible after the copy is made? Wouldnt it be difficult to know where to trim/cut? Tks

@FiberglassSupply

3 жыл бұрын

Good question! On this plug Tim did a really good job of blending the bondo to the part and the trim line was lost. In this case there are a couple of options, one is to scribe the trim line on the plug after doing the bondo work and before releasing the other option is to drop the part back into the mold after the mold is made and scribe the mold. A carbide metal scribe works or in a pinch a sharpened nail also works.

@eddiecjkang3545

3 жыл бұрын

@@FiberglassSupply ok im doing a front fender for VW scirocco, but have some problem im facing. Especially with some of edges folding inwards. Making 1pc mould would have mechanical lock when demoulding...is it advisable to have a 3part mould and still be able to use a infusion method? Tks for ur help and reply

@FiberglassSupply

3 жыл бұрын

Eddie CJ Kang yes you will need to do a multiple piece mold. You can send some pictures of the part to matthew@fiberglasssupply.com and I will make some recommendations specific to your project.

@eddiecjkang3545

3 жыл бұрын

@@FiberglassSupply thank you so much!

Thankyou very Much to sharo gand Teaching. My friend, One of my plasti side part of my motorcycle was stolen ) In the tend only shell All parts nlt only one I need ) ¿ How Can I do , to make a mold having only the other Side as mold ?. Translate : How can I build a mold if I only have the opposite side as a Shape but inverted. Can I mold with clay, plasticine, what do you suggest or advise me, brother? Thank you and health to you and yours! I live in Córdoba, Argentina and things are getting very expensive here, we have to Invent and Recycle. A hug for you !

video about sand paper

Thanks for making this content! I'm looking for a supplier for fiberglass mold/CF parts materials so I went to your website. Sorry, it's a mess. You seem pretty with it just was kind of jarring to go to your website and think "are these the same guys?"

Can you make engine cowling from fibre glass plizz

How can i miorror the mo;ld to make the other (missing) side

Why bonding? Use modelling wax, faster and no sanding.

@travisfranklin423

Жыл бұрын

Bondo?

You have a link to where and ehat materials i need

What kind of shop do I need to look for to have something like this done? I have a bumper splitter that is no longer sold, so I need one made using my old one as a reference, but I have no idea what kind of shop would replicate the part in Fiberglass.

@FiberglassSupply

Жыл бұрын

Look for a composites or fiberglass fabricator or repair shop, if you call our shop our customer service guys should also be able to point you in the right direction or see if we know of someone in your area.

I didn't know you could thin Bondo with rubbing alcohol

@FiberglassSupply

2 жыл бұрын

Yep, we tend to use rubbing alcohol with a high alcohol content (99%)

Need to consider shrinkage. Mold will shrink a bit and parts will shrink. Production parts will be slightly smaller than original and may not fit. This would require to build up original part before making a mold.

I am wanting to cast a large plastic part and don't want to damage the original part if possible, how would I go about that.

@FiberglassSupply

2 жыл бұрын

You need to take care in how you mount the part (if it needs to be mounted) to not damage it, so cover it with tape, use adhesives that can be removed, be careful if you have anything that needs to be sanded (like the putty work on this part), etc. When you release the part to build the mold use wax and PVA, apply the PVA until you have a pretty thick coat, it will form a physical barrier between the part and the tooling gelcoat. It takes some care but can be done.

Ready for the next step. Tell me what I need to do. :)

@FiberglassSupply

3 жыл бұрын

Dropping next week!

@FiberglassSupply

3 жыл бұрын

Here is the next step: kzread.info/dash/bejne/mpiBpdx7pdnelJc.html

Why did you use bondo instead of filling wax?

@FiberglassSupply

11 ай бұрын

It is really up to our tech what their preference is, no particular reason.

Alhamdulillah :)

I like the bondo method, I’ve used modeling clay but the method of bondo, prime, and sand is tits.

I can’t find part 2 😢

@FiberglassSupply

2 жыл бұрын

Part 2: kzread.info/dash/bejne/mpiBpdx7pdnelJc.html Playlist: kzread.info/head/PLnv7h97DEIAdLBl7ToTIfzetQmYHZg1HU

Seems like using clay would have been a lot quicker and easier than dealing with all the Bondo mess.

@FiberglassSupply

11 ай бұрын

It really depends on the tech and their personal preference.