what is the glassing schedule on one of your carbon fiber boards?

Do you pull the stringer down the rail? These look kinda similar to slotstiks.

How many onz of fiberglass cloth on the top sir for final???

what cind of fiber glass are you useing ?

From Philippines. Thank you bro.

@OXSEnterprises

3 жыл бұрын

No problem.

very interesting vid thanks for sharing

@OXSEnterprises

3 жыл бұрын

No problem

@bertojasminbolano6726

3 жыл бұрын

Hi may i have a favor i want skimboard can you give me skim board please

thanks for the caption. I'm from Brazil

@OXSEnterprises

3 жыл бұрын

You're welcome 😊

I’m thinking about building one but I don’t know what foam to get

@stevew2842

Жыл бұрын

Klegecell

So keen for one now!

@OXSEnterprises

4 жыл бұрын

Do it!

During the end sanding process, doesn’t the board weaken where you are sanding the fibreglass for the traction pads?

@OXSEnterprises

3 жыл бұрын

From an on paper stand point, as soon as you sand fibreglass (or carbon) you weaken it. It's irrelevant really as the boards aren't constructed around the tipping point of them breaking and/or being too weak. On a side note this construction method is out of date as I've made a heck of a lot of improvements.

What kind of paint are you using on the board? Is it a normal satin paint? is it a resin? Trying to redo the top of my board and would like some advice

@OXSEnterprises

3 жыл бұрын

Just a spray can satin, I don't use it anymore. Get a much better finish with a polish.

can i ask a PDF of the actual size and shape of your board. PLEASE

@fabianfisher6740

3 жыл бұрын

Pro trick: you can watch movies on flixzone. Been using them for watching loads of movies lately.

where can u buy this foam?

Wow dude! Awesome!!! I would love one of those!!!

@OXSEnterprises

5 жыл бұрын

Anytime bro.

Wat is the form that gives the shape of the rocker made of that the fiberglass dose not stick on and comes off afterwards?

@OXSEnterprises

2 жыл бұрын

Use a release agent on the mould surface.

Woww😘😘 love from 🇮🇳🇮🇳

@OXSEnterprises

3 жыл бұрын

🤩

what is the weight of m2?

I bought a construction foam, will it fit? These are such sheets for insulation of the house.

@OXSEnterprises

2 жыл бұрын

Will it fit?

@alex_fuji

2 жыл бұрын

@@OXSEnterprises Oh, sorry, I don't speak English very well. I meant whether it is possible to create a skimboard from such a thing?

@OXSEnterprises

2 жыл бұрын

Of course it's possible. How good it ends up being is up to you.

Also making one using epoxy resin, and polystyrene

@OXSEnterprises

5 жыл бұрын

Nice. The polystyrene will dent pretty easily.

Best place to buy high density foam? Thx

@OXSEnterprises

2 жыл бұрын

Probably the place closest to you that has it.

@stevew2842

Жыл бұрын

Allnex Composites

What’s the cost usd for one like that? Thanks

@OXSEnterprises

3 жыл бұрын

Current pricing as of this message. Carbon $589nz = $421usd. Plus shipping.

How do you form the rocker?

@OXSEnterprises

4 жыл бұрын

I don't want to give my exact process away but I will have to do a video on it explaining what happens.

@plyingod

3 жыл бұрын

make a wooden stringer 3/4. draw a template. cut foam in half. gorilla glue one half of foam to stringer.. use as much tape as needed to form foam to conture of stringer creating front rocker....rinse repeat other half.

what does the mold look like. that’s the only thing i’m tripped up on

@OXSEnterprises

5 жыл бұрын

Like a bent table.

@robertmedica819

5 жыл бұрын

OXS Enterprises can i send you a DM on instagram to learn more?

@OXSEnterprises

5 жыл бұрын

No. Parts of the process I don't share.

@matthudson4136

4 жыл бұрын

@@OXSEnterprises Then why post the video? Typical of our generation though. Only cares about A) themself, B) showing off to get likes, C) themself, D) money, E) themself.

@christinepaniamogan6674

4 жыл бұрын

Your just posting videos people dont understand.. we cant get any good ideas of this... You just want to have fame to people who knows less of these process!!!

How much do you sell them for?

@OXSEnterprises

5 жыл бұрын

This one with tail pad is $508nz. E-glass is cheaper and prices change a little with traction set up.

We're is your shop

@OXSEnterprises

5 жыл бұрын

Now in Opua, Bay of Islands.

Thunder at in the background ayy

@OXSEnterprises

4 жыл бұрын

*cat Good spotting.

how do you make the rocker

@OXSEnterprises

3 жыл бұрын

I cover the topic here kzread.info/dash/bejne/dmqi0I9tgNPQcdo.html

@pimpsk8er3702

3 жыл бұрын

@@OXSEnterprises what about if you dont have a vacuum or mold

@OXSEnterprises

3 жыл бұрын

You will need to find a way to bend something to form something and hold it there. Clamps work but you'll need a way to curve the material you're using.

@pimpsk8er3702

3 жыл бұрын

how much are your boards

hey!! found this trying to make a skimboard. will tell you how it goes

@OXSEnterprises

4 жыл бұрын

Cool. Good luck.

@paveltube7628

3 жыл бұрын

how did it go??

Can I have it ?😊

this board need one more layar epoxy rise (hot coat) i think=)

You flaked on the whole process apart from finishing touches 👎🏽👎🏽

You didn't show us anything? Except a magic trick… Leaving everything out? I'm grateful not to be banking on riding the board you taught us how to (not) make because we would be bummed riding nothing... Teach people your skill.. Don't hoard it?! This is so old energy... Nothing for the New Earth. PS- I taught Barton Lynch how to make a Street Boardz in 2003 with... I designed the Stik for Carveboard Sports... So Thanks for the Abracadabra...