Thank you for watching, thank you for your support! 😊 ► Tutorial and Plans available: allflavorworkshop.com/circular-saw-guide-and-crosscut-jig/ ► ALL Woodworking Plans: allflavorworkshop.com/woodworking-plans/ 🛠 All My Tools & Gear: allflavorworkshop.com/tools-and-resources/ Also, check out the description. Subscribe not to miss anything!👍 Stay Safe!

@emilyhenriquess8505

3 жыл бұрын

Lovely Video clip! Apologies for the intrusion, I am interested in your opinion. Have you tried - Schallingora Dexterous Programme Scheme (erm, check it on google should be there)? It is a good one off guide for building any shed in no time with no experience minus the headache. Ive heard some pretty good things about it and my GF after a lifetime of fighting got cool success with it.

@songkialimeric

2 жыл бұрын

Very good , and very easy to make. Thanks for sharing you good idea. Keep it up. 👍👍👍

@davidwhite8045

Жыл бұрын

Hi can I ask where you obtained the Aluminum it does not look like L shaped Thanks Dave

Liked the holding hole cuts on this one.

@AllFlavorWorkshop

13 күн бұрын

Thanks :)

Seen a lot of theses different Adonis and easy to make

Different thicknesses of plywood used,guess ya pick what suits you,lol

Best saw guide I've seen yet. Any chance you could provide a sketch with rough measurements? I watched this video probably 5 times trying to see where you made you marks on the ruler but didn't catch them all. Like you, once I make yours, this will be my third version, but I like yours just the way it is. All versions I tried make a straight line. Yours adds a rail to make a square cut. Yours allows for aligning the saw BEFORE you make the cut so you don't start crooked. Again - best version I've seen online yet!

Nice. I single frame stepped as you were sliding the square up to that cut - it's indeed VERY square.

I was skepticle of a 20 volt circular saw. But I have several B&D 20 volt batteries and the drill Works great kzread.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . I saw the 4 stars and some glowing reviews so decided to purchase this saw. Well, leave your money in your pocket and run a cord because this little saw won't cut

@AllFlavorWorkshop

9 ай бұрын

Awesome :)

Excellent. Silence is golden.

This is the best Circular Saw Guide! Thanks. 🙂

@AllFlavorWorkshop

3 жыл бұрын

Thank you too. 👍

Excelkent video, nice and precise work!

This video is amazing I dont plan to make the exact guide but Im going to borrow some concept from this

@AllFlavorWorkshop

3 жыл бұрын

Thank you Vin. Stay Safe. :)

that's a great demo, can't wate 2 make mine, very simply made, n very instructional, thanx 4 sharing, thanx again, God Bless

@AllFlavorWorkshop

3 жыл бұрын

Thank you too Donny, let me know how it turned out. Stay safe. 👍

Nice job on this one Lukas, I love the design 😊👍 Looking forward to see your next project!

@AllFlavorWorkshop

3 жыл бұрын

Thank Boris! 😊 Honestly this is a third design for this saw guide. Now I need to test it more to see where it could be improved ;)

@FFD_Restorations

3 жыл бұрын

@@AllFlavorWorkshop cool, sounds good to me 👍

Excellent. Thanks for sharing and kindly regards from Deutschland

@AllFlavorWorkshop

Ай бұрын

Thank you too :)

great build, seem to work perfectly! 🙂👌

@AllFlavorWorkshop

3 жыл бұрын

Hi RhinoWorks, thank you. It works nicely. Let's see how it could be improved more. ;)

Mantap bang,from Indonesian

Super.very cool.

Nice and simple, so love the idea..

@AllFlavorWorkshop

3 жыл бұрын

Thank you, Graig, much appreciated. Glad you like it 😊

Agree with previous comments, could you please give measurements. Great piece of kit.

Very clever,very simple,very handy piece of kit 😅 thank you for sharing

@AllFlavorWorkshop

10 ай бұрын

Thank you Patrick :)

Wonderful work !!! Many many compliments!!!! g t

@AllFlavorWorkshop

3 жыл бұрын

Hello Gianluca, thank you for the support and the comment. I really appreciate it. 👍 Stay safe.

Simply great!!

@AllFlavorWorkshop

10 ай бұрын

Thanks! :)

Good looking and helpfull tool. Nice Crocs too! :D

@AllFlavorWorkshop

3 жыл бұрын

Thank you Streeky. :)

Excelente!!!!

@AllFlavorWorkshop

3 жыл бұрын

Thank you Arriola :)

Excelente Gracias por compartirlo lo felicito

@AllFlavorWorkshop

Жыл бұрын

Muchas Gracias Luis. Me alegro que le guste. :)

Great DIY Joe new subscriber here in Landers alabang las piñas city philippines shout out pls next video lods si mawik marcelo ng looc romblon ph

thank you

@AllFlavorWorkshop

3 жыл бұрын

Thank you too Emad. 👍

Wow. Beautiful. (Wish I could make one). Thank you for sharing. God[Bible] Bless.

@AllFlavorWorkshop

4 ай бұрын

Thank you Tony. Are you making one? :)

@tonyd1149

4 ай бұрын

@@AllFlavorWorkshop I'd like to make one, but am currently struggling with a shower upgrade (into a powder room), among other duties. We shall see if I can carve some time out for it. Your handy-work is very nice. Thank you for the kindness of a reply, and making/posting your video. God[Bible] Bless.

@AllFlavorWorkshop

4 ай бұрын

@@tonyd1149 Thank you too Tony, hope the shower renovation turns out good. Let me know once you get to this project :)

Love it 💯 👍 😀

@AllFlavorWorkshop

Жыл бұрын

Thank you! Cheers!

Bom dia índio veio Você faz uns gabaritos top um grande abração

@AllFlavorWorkshop

3 жыл бұрын

Hi Claudinei, thank you, I appreciate it. Grande abração!

What did you use to put hole marks on the aluminum L angle?

Mantap bro, Verry good, a'm from indonesia

@AllFlavorWorkshop

Жыл бұрын

Thank you Hamsyiati

😎 cool

Thanks for 🎉🎉all your videos What's your makitas type or name series???????

@AllFlavorWorkshop

4 ай бұрын

Thank you Javier :) The one on the video is the Makita HS7611J. Check my website (tools I use) I also have alternatives there :)

Muy buen material lástima que no tenga las medidas completas de los cortes internos

Hello. I got the plans. I had to make some adjustments. Using 24x48 board. Thanks

@AllFlavorWorkshop

Жыл бұрын

Perfect! I am glad you got it. 👍

Hi Lukas, did this replace the double rail jig you built? They are very similar othewr than the bar under the base plate?

@AllFlavorWorkshop

3 жыл бұрын

Hi Dave! There are pros and cons I see now. The double rail is a bit more sturdy, holds tight, shorter, you cannot see perfectly well how far and where your blade is and it takes more time to adjust it correctly to the line / how you wanna cut - though works well. This one is quicker to set and cut, you can crosscut, easier to adjust, has anti-slip tapes on the bottom (which is a huge benefit - otherwise I recommend to fix the jig using clamps or something).

@davidbergewaytogo

3 жыл бұрын

@@AllFlavorWorkshop Thanks! The only improvement I can see is making it double-duty : circular saw guide on one side, and jigsaw guide on the other! (y)

Hi Lukas Love your designs! Where can I buy the same yellow ruler you are using? Brand? Thank you

@AllFlavorWorkshop

3 жыл бұрын

Hello Rashid, thank you. Wow, the yellow ruler. I checked it out and it has not brand on it. Let me think / look if I bought it online. 👍

What are benefits center and circle holes?

Great video! May I know where to find this Aluminium U / L Angle?

@AllFlavorWorkshop

3 жыл бұрын

Hello Ansonqu, thanks.I bought one in a local hardware store. They are quite common so I assume you will find one of these close to your place.

Just a thought but would the handle not give a firmer grip if it was on the middle strut? Or have you tried that?

@AllFlavorWorkshop

3 жыл бұрын

Hi Dave, I am found out that 90% of the cuts I am making on the lower part of the jig. I guess the handle is more convenient there.

Do you have a link for the black tape?

I suppose you could router on the bottom cutting edge and fix anti tearout strip and that would be good

@AllFlavorWorkshop

Жыл бұрын

Good suggestion, Kevin, thanks.

Qué Medidas tiene esa guía GRACIAS

@AllFlavorWorkshop

3 жыл бұрын

Hola Agustín, la base es 40x70 cm

Quais as medidas???

Hi, very good usefull video, where can we find the dimensions ?

@AllFlavorWorkshop

3 жыл бұрын

Hi Hittit, thanks, much appreciated. I'll be publishing those on my webpage.

que madera usas de que grosor

I'm sure you've moved on to new things, but a single drawing showing where the cutouts were placed and the holes drilled would help a lot. We can see that you placed the ruler precisely but we can't see where you were measuring from or to.

Hii, what kind wood you used?

@AllFlavorWorkshop

3 жыл бұрын

Hello Chanel, hope you're well. that is birch plywood. 👍 Thanks!

Instructions would be nice?

If your guide is flush with the line, the LEFT side of the blade will run along the guide. Your guide is flush with the line therefore the RIGHT side of the blade will be OVER your line and your measurement will be out by the thickness of your blade!

@YarNotsew

2 жыл бұрын

That's the way all of these saw guides work. You place the guide on the "keep" side of the line. Everything to the right, including the kerf, is scrap.

@Mr.Grimsdale

2 жыл бұрын

It depends where you measure from, if you measure say 30cm from left to right then draw your line, then use the guide and do your cut, you will have a 30cm, if you wanted 30cm on your right-hand side of your cut line then you would have to add the thickness of your blade.

@hmmob3956

2 жыл бұрын

@@YarNotsew Otherwise you would have to compensate for the kerf, which is tedious and adds inaccuracies and can vary from blade to blade.

How thick is the board?

@AllFlavorWorkshop

Жыл бұрын

It is 9mm thick

👏🏼👏🏼👏🏼👍🏼😁🙋🏻‍♀️🇧🇷

@AllFlavorWorkshop

3 жыл бұрын

Hola Maria! Thanks 🙂👌

Can you give me the detail dimension, so that we can easy to make this useful tool. Thanks.

@AllFlavorWorkshop

3 жыл бұрын

Hi Thomson! thanks for the comment - I will be publishing this information on my webpage. Please bear with me. 😉👍

@ashokmoghe8035

3 жыл бұрын

Yeah - great video and would like to build one too. Is there a drawing available for dimensions etc. Thanks .....

@ashokmoghe8035

3 жыл бұрын

Hello. This is awesome and need to build this ASAP for my current project that's halfway. Can you please share the dimensions. Thanks in advance 🙏🙏

@AllFlavorWorkshop

3 жыл бұрын

@@ashokmoghe8035 Ashok, my apologies but I dont have it at hand now. If you could wait for few days ...

Where are the measurement?

@AllFlavorWorkshop

Жыл бұрын

Hello there Mother Fynest. You can find those on my website - available for download ;) Hope it helps

Alot of work for 2 cuts demonstrated.

D

no audio ?!?!? whats the point ,how thi s help anyine

You talk way too much 😂

@AllFlavorWorkshop

Жыл бұрын

😀 good one

If you would buy a real skil saw. (Skil 77) worm drive you dont have to make a jig to cut straight. Time to quit buying girls tools