lube all hinges with white lithium grease and spray the torsion spring on top, youre welcome

@user-mg6hi2ch7f

9 ай бұрын

U just ruined this guy, lol

@philbellmore9944

5 ай бұрын

What spray for the spring? Silicone?

@trulymeparker

5 ай бұрын

​@@philbellmore9944RP7 spray is fine. Don't use WD40

@jomo795

4 ай бұрын

Garage door lubricant. Blaster has it.

@DownHillgamer

2 ай бұрын

Thats what i did. Just put the wd40 white lithium on the hinges and then silicone lube on the smaller moving parts and rollers. White lithium looks like shit tho after its smeared all over and tracks and stuff.

Just the tracks? What about the hinge pins, bearings, torsion spring?

Mike- you don't mention the brand/type lube you used. Please update.

So what lube did you use?

Can’t thank you enough for your help. Just subscribed

can’t believe i followed your advice! After some thought, how does lubricating the tracks leave out the squeaks etc; all it does is provide less squeaking from the wheels with the track and my wheels is not metal that would grind either the track to squeal. WHAT A WASTE OF LUBRICANT AND TIME. would’ve gotten better advice from the neighborhood street cat. Who is this guy???😂😂😂

@bricksbyficks6448

Ай бұрын

Totally agree now after following this video, what a joke

Do not lube the tracks! Just clean them.

Previous owner lubricated tracks with what looks like 10w40 oil. My question is whether to leave it or clean it out? I presume the latter.

I like the gas pump. Thanks for the info

You are not suppose to lubricate the tracks.

@kushkaul

3 жыл бұрын

That is correct. You only clean the tracks. Lubricated tracks will collect dust over time and it'll be a pain to get that off.

@BobsGT235

3 жыл бұрын

I agree. I signed off when he mentioned/showed doing that mistake.

@sungleong

3 жыл бұрын

well, he did say it's more like cleaning than lubing.

@johnd4018

2 жыл бұрын

exactly. And how exactly would lubricant "quiet" a wheel that is rolling in the track?? And then he decides at the end of the video that the lubricant is for cleaning the track??? When is the last time you used grease to clean something?? This guy has no idea what he's talking about.

Wrong wrong wrong. You don’t lubricate the tracks. All you’re doing is creating an environment where dirt and dust will accumulate and make it harder for the garage door wheels to go over or through. You want a smooth and clean track that your wheels can ride on. So clean your tracks with a degreaser until all that junk from your previous lub, dust, and dirt comes off.

@xian.irungu

6 ай бұрын

You’re supposed to lubricated

@xian.irungu

6 ай бұрын

It’s supposed to be lubricated

@edwardlouis3428

6 ай бұрын

@@xian.irungu not the tracks. Te tracks are smooth enough. Clean them well and carefully run your fingers inside the tracks and you’ll see.

@CrazyxxxUkraine

5 ай бұрын

One says this other says that.. I’ll have to watch more videos and form my own opinion.

@edwardlouis3428

5 ай бұрын

@@CrazyxxxUkraine ive done both, and just cleaning the tracks was 10x better. It made it easier for the wheels to roll on it without having to go through all the muck that the lubrican collects. It also made it easier for the motor as well. Good luck with it.

What type of lube?????? What if you don't have nylon rollers????

👍

What lubricant is good for garage door track with metal rollers?

@l00tur

3 жыл бұрын

Graphite, but you probably have this figured out already.

@charlesdavaro8554

Жыл бұрын

Yea he is a mind reader knuckle head

This video did not tell me what needs to be lubricated and did tell me to put lube where it should not be put. Is this a prank?

@surfordie82

Ай бұрын

I literally checked to see if it was uploaded on April 1st

I need a non powered old school ish, just make a shop / old good metal garage door to not be obnoxious.

Others say do not lube the tracks

I KNOW YOU SAID SHUT OFF POWER BUT WHEN YOU FINISHED WIPING YOU REACHED OUT TO THE SWITCH AND THE DOOR CLOSED. HUH?

Thought u supposed to NOT spray the tracks. Don't u want the wheels to roll n not just slide up n down the tracks??!

Thank you for helpful video!

This video is so lacking in information. Type of lube, what about the chain and spring? Should I lube the wheels? Etc, etc....

NEVER lubricate the tracks. They should only be clean, not lubricated. The metal hinges should be lubricated.

Don’t do it ! will jump off track. 500 dollars to fix

don't lube tracks. lol

You aren't done. You need to lube the chain and the spring. Why not put it all in one video

wtf!!? DO NOT DO WHAT HE SAID. oh my god

WRONG!!!

Man, this video is all just wrong lmao.

Don't do this! Wrong advice, all what this will do to a garage door is attracted some dust!