How to level your Husqvarna lawn mower deck YTH
Тәжірибелік нұсқаулар және стиль
I show you how to level your mower deck on your Husqvarna YTH22V46.
Thank you very much for watching and God bless
**Ratcheting wrench Metric and standard amzn.to/3x99eyM
Bible ESV easy to read amzn.to/3qshNQP
Bible NKJV amzn.to/30ns322
Titan solar generator (large solar generator) poweredportablesolar.com/ref/48/
Go pro that i use amzn.to/2WC6WXH
my wireless mic Rode wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my KZread channel. Please understand that the content on the DIY jim KZread channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZread channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZread channel.
#levelyourhusqvarnalawnmower #Husqvarnalawnmowerdecklevel
Пікірлер: 293
****CLICK READ MORE**** Here is a link to the nice ratcheting wrench I used. Thank you very much for watching and God bless **Ratcheting wrench Metric and standard amzn.to/3x99eyM *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites. *Disclaimer - Thank you for visiting my KZread channel. Please understand that the content on the DIY jim KZread channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZread channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZread channel.
@rkharbaugh3
2 жыл бұрын
Great video just what I needed to see I know my decks out of alignment so this should fix it right up thank you
@DIYJIM
2 жыл бұрын
@@rkharbaugh3 it should help thanks for watching
@CJRodriquez-uq2xt
Жыл бұрын
Lionel need fixing fix my John Deere
@2glory
Ай бұрын
Now I can stop digging into my grass.
I’m a widow and learning everything about how to maintain and fix my outdoor equipment. Your video was extremely helpful. After putting on new spindles and blades I took apart the rear adjustment arms (they had craftsman 20 mm sockets on them along with rusted bearings). I also rebuilt the carburetor on the Husquivarna YTH 24V48. The springs were not fun on this one. After looking at a parts diagram I quickly determined the idiot at the repair shop had no idea what he was doing. Now I own two extra craftsman sockets he had on the rear adjustment arms trying to level the mower and I have a level mower. Thanks again for such a clear, descriptive video and thanks for letting me know what tools I needed in advance.
@DIYJIM
Жыл бұрын
Glad I could help you Robin hope your having a good weekend.
Thanks for making this video. I tried the steps in the video on my Craftsman 46 (Husqvarna) and saw a great improvement! No more stairstep cuts. Thanks again!
@DIYJIM
2 жыл бұрын
Glad it helped!
Thanks, you got me mowing again. I watched a few different videos, but your’s was straight forward and most helpful.
@DIYJIM
2 жыл бұрын
Glad you like it, thanks for watching
Thank you, Sir. Very simple and straightforward.
@DIYJIM
3 жыл бұрын
Thanks glad you like
Thanks for a great detailed video. I decided to go for 3 1/8" in the front and 3 5/8" in the rear of my 46" deck. That should be the maximum height to go as it comes real close to my belt rubbing but, time will tell. I should be barely safe with the belt. My front was at about 2 3/4" to start and the rear was 3 1/2" to start, so, adjustment was in order. Been that way since new and I have 72 hours on it. Great tractor for sure! BTW, I run LEADED 'NON corn alcohol' fuel that I get from a gas station near me. I run it in all my small engines as it's a safe alternative and it stores much longer without gumming up as with Unleaded corn alcohol fuel, and my hoses will be just fine. ALSO for those who don't know, the triple bagger for the 48" decks will fit the 46" DECK mowers. Usually the 46" decks are two baggers. I found out by mistake when I bought the triple bagger and it fit great. When I went to look for a new rubber part for the chute, the triple baggers said for 48" decks and double bagger for 46" decks. Boy was I happy to learn my mistake was a perfect fit! The more bags the better and the longer you get to mow in between dumping's.
@DIYJIM
9 ай бұрын
Thanks for watching
Thank you! Your video was super helpful and easy-to-follow. I'm generally not too good with repairing things, but you made it simple. Our lawn should look much better after this adjustment!
@DIYJIM
10 ай бұрын
You're welcome! Thanks for watching
Used your instructions and leveled my deck for the first time (I am seventy something). It went very smoothly. Thank you for making this video. Much appreciated. And I am subscribing.
@DIYJIM
Жыл бұрын
Thanks for subscribing glad I could help
Great video! Thanks for show how to fix deck issues!!
@DIYJIM
3 жыл бұрын
No problem! glad to help
I have used your video several times to review this procedure. Thank you.
@DIYJIM
Жыл бұрын
Welcome thanks for watching it several times. Crazy but sometimes I watch my own videos also lol
You just made my job a lot easier thank you.
@DIYJIM
2 жыл бұрын
Glad I could help, thanks for watching
Same procedures for my Husky TS 348 XD; good vid - very simple and straight forward. Good job!
@DIYJIM
2 жыл бұрын
Thanks
Thanks. Great directions - oral and visual presentation easy to understand. God bless you!
@DIYJIM
Жыл бұрын
thanks for watching
Very easy to follow and right to the point.
@DIYJIM
2 жыл бұрын
Thanks
Great video. Professional done! Such a clean mover!!
@DIYJIM
2 жыл бұрын
Thanks
Thank you very much. You do a great job of teaching.
@DIYJIM
2 жыл бұрын
You are very welcome
Last step I needed to complete my rebuild. Thanks!
@DIYJIM
2 ай бұрын
Welcome
Well,people like you are a genuine good human being who wants to help his fellow human (man),don’t come across many,than you and god bless you,will keep watching,thanks again mate👍
@DIYJIM
4 ай бұрын
Very nice comment. Thank you very much. And thank you for watching.
Once again I use your video instruction and nothing goes wrong! Thanks 😊
@DIYJIM
Ай бұрын
Awesome thanks again for watching my videos
Thanks, great explanation!!
@DIYJIM
2 жыл бұрын
Your welcome thanks for watching
Very informative and to the point!
@DIYJIM
2 жыл бұрын
Thanks
My deck is a little different but, still the same idea. Thank you!!
@DIYJIM
2 жыл бұрын
Welcome thanks for watching
Short and sweet. Thanks as the manual doesn't have this info. Great video.
@DIYJIM
11 ай бұрын
You're welcome!
Very helpful, straight-forward information.
@DIYJIM
Жыл бұрын
Thanks for watching
GREAT EXPLANING AND PICS THANKS VERY MUCH U WERE A LOTTA HELP NOW I MOW EVEN THANK U,,,
@DIYJIM
2 жыл бұрын
Glad to help
Nice to work on a brand new mower, blessings
I needed to watch this years ago. Thx
@DIYJIM
3 жыл бұрын
glad to help
@JohnKaufmann
2 жыл бұрын
Me too
Very informative thank you
@DIYJIM
3 жыл бұрын
Your welcome
Very helpful thanks so much
@DIYJIM
3 жыл бұрын
Your welcome
The Best and easiest instructions I have ever seen. This guy should have his own TV show. Great Job..👍👍👍👍
@DIYJIM
2 жыл бұрын
Thank you very much I put a lot of work into my videos. Thanks for watching
@elvispreston8954
2 жыл бұрын
@@DIYJIM I’m not very mechanical in the areas of riding mowers. I was having this exact problem today while cutting my grass. I noticed that the deck was not even. I came in the house and looked on KZread and I found you on my first search. And I watched your video and went back outside and I did exactly like you instructed and it worked.
@DIYJIM
2 жыл бұрын
@@elvispreston8954 awesome glad I could help
@DIYJIM
2 жыл бұрын
@@elvispreston8954 awesome glad I could help
Thanks for the video! always wondered how to level the deck
@DIYJIM
Жыл бұрын
Glad I could help Doug
Appreciate the information 👍
@DIYJIM
2 жыл бұрын
No problem 👍
Good to Know thanks.
@DIYJIM
3 жыл бұрын
Glad to help
YOU ARE APPRECIATED! YOUR VIDEO WAZ GOLD STAR FOR ME .
@DIYJIM
2 жыл бұрын
Thanks
Thanks for the info.
@DIYJIM
2 жыл бұрын
Your welcome
Thanks mate I will try it today. 👍
@DIYJIM
2 жыл бұрын
Hope it helps thanks for watching
Ty for this.
@DIYJIM
2 жыл бұрын
your welcome, hope you are having a good summer
Thank you, sir! This answered my question.
@DIYJIM
Жыл бұрын
Awesome glad I could help
Nice one Jim. It's pretty easy once someone shows you how to do it.
@DIYJIM
4 ай бұрын
Glad I could help thanks for watching
Very helpful. Thanks so much.😎
@DIYJIM
2 жыл бұрын
Glad it was helpful!
Hey thanks a lot for that video, you're awesome, I have to level mine today, it's cutting scalping my lawn a little bit have a good one!!!
@DIYJIM
2 жыл бұрын
Thanks hope my video helps
@gaucho5204
2 жыл бұрын
Hi, yes it worked great,my mower was way off,it actually took me a couple hours ,taking breaks, didn't have the 3/4 " deep socket,but took my time and got it right,thanks again,have a good one!!!
@DIYJIM
2 жыл бұрын
@@gaucho5204 awesome
Helpful video. Thanks
@DIYJIM
Жыл бұрын
Welcome thanks for watching
Thanks for the video. I have felt like mine was off ever since I bought it new last summer, It seems to cut much lower than my previous mower even at the highest level
@DIYJIM
2 жыл бұрын
Your welcome, thanks for watching
Great info, appreciate you!
@DIYJIM
3 ай бұрын
Glad it was helpful!
Much appreciated!
@DIYJIM
9 ай бұрын
No problem!
Great info 👍👍
@DIYJIM
2 жыл бұрын
Thanks
Thanks, you were a great help. 👍👍👍👍👍
@DIYJIM
Жыл бұрын
Thanks for watching
the best chuck it out the mower I have ever owned.
@DIYJIM
Жыл бұрын
Thanks for watching
THANK YOU FOR YOUR HELP
@DIYJIM
2 ай бұрын
Welcome thanks for watching
Thank you for this! Didn’t know you could raise and lower the deck.
@DIYJIM
2 ай бұрын
Thanks for watching
Thanks a lot!
@DIYJIM
11 ай бұрын
Welcome!
So very helpful.
@DIYJIM
2 ай бұрын
Glad it was helpful!
Just watched this video. Great information and will be trying it soon
@DIYJIM
9 ай бұрын
Thanks for watching
nice one. thanks for the tips. great info. Frank
@DIYJIM
2 жыл бұрын
Glad I could help
To make the job a little easier, cut 3 or 4 blocks of wood at the right size you need and mark the sizes. That way your not fighting with a tape measure. Thanks for the video.
@DIYJIM
2 жыл бұрын
I did that with my John Deere thanks for watching
@DIYJIM
2 жыл бұрын
@Jeff Haddan I though about that as long as the mower itself is level. I was just going by the manual. Not everyone has a level. Thanks for commenting and watching
Thanks👍
@DIYJIM
2 жыл бұрын
Your welcome thanks for watching
Well done thanks & appreciate you.
@DIYJIM
11 ай бұрын
Thanks for watching
Good video. My Husqvarna has two adjustments in the rear, one on each side, and one in the front. Thanks
@DIYJIM
Жыл бұрын
That sure sounds easier, thanks for watching
Thanks for video
@DIYJIM
2 жыл бұрын
Welcome thanks for leaving a comment
Anoterh Awesome 'How To' video by DIY Jim! Thanks Jim, I'm learning a lot from you!
@DIYJIM
Жыл бұрын
Thanks again for watching my videos
Thanks Jim, it was a toss-up between you and Dennis, so I watch both and the tutorial was brilliant, Thanks, I have subscribed.
@DIYJIM
Жыл бұрын
Thanks for subscribing Andrew
Excellent Tutorial. (Even I can understand it!)
@DIYJIM
Жыл бұрын
Thanks for watching Dan
Thank you for an extremely helpful and informative video, also the oil change video was very helpfull and informative
@DIYJIM
3 ай бұрын
Glad it was helpful!
Great video very informative
@DIYJIM
Жыл бұрын
Thanks
Hey Jim you do a great job!
@wayner4christ988
2 жыл бұрын
I have damage to the wiring harness due to a mouse or something. Will have to buy the entire harness? Two wires ( gray and black) are chewed in two on the harness and on the other side.
@DIYJIM
2 жыл бұрын
Thanks, I am trying to get better at this KZread thing.
thanks!
@DIYJIM
Жыл бұрын
Welcome!
Gonna try
@DIYJIM
2 жыл бұрын
Hope my video helps you, thanks for watching
Thanks a lot
@DIYJIM
Жыл бұрын
Welcome
Another great video of yours that has helped me. Not sure if I missed you saying it but, it’s probably worth noting that you had your deck raised to the highest setting before you started adjusting everything. Keep up the great work!
@DIYJIM
4 ай бұрын
Thanks for watching my videos
Good stuff!
@DIYJIM
16 күн бұрын
Thanks!
Thanks
@DIYJIM
Жыл бұрын
Welcome
thanks! I gave you a thumb-up. I found mine was right at 2-1/2" at the front. I wanted to raise it a 1/2" any-way, cause it cuts too short. thanks again! PS, mine is a 2013 22V46.
@DIYJIM
Ай бұрын
Glad it helped!
Thanks - i was changing a tire and left my mower on a crane - the weight shifted the bolts and lowered cutting deck -
@DIYJIM
10 ай бұрын
Thanks for watching
That was helpful
@DIYJIM
2 ай бұрын
Thanks
Not everyone has a four foot level. The basic process is the same for all makes - put your tractor on a level surface, measure the height of the deck rim first on both sides and adjust using the rods... then measure in front and in back and check which hole the front support arm should be in to give a slight rise in front.
@DIYJIM
7 ай бұрын
Did I even use the level? Thanks for commenting
Worked like a charm! Thanks for your help!!!
@DIYJIM
2 жыл бұрын
Your welcome
Your awesome!!! Save me a lot of time>
@DIYJIM
2 жыл бұрын
Glad I could help!
good video, instructions were quick and easy to follow. HTY series? lol. Happens.
@DIYJIM
2 жыл бұрын
I noticed that, thanks for watching
Good video.
@DIYJIM
Жыл бұрын
Thanks for watching
Nice
@DIYJIM
2 жыл бұрын
Thanks
Good job, help me alot
@DIYJIM
2 жыл бұрын
glad I could help
@richardsloan1217
2 жыл бұрын
Do you leave the deck all the way up when adjusting
@DIYJIM
2 жыл бұрын
@@richardsloan1217 I don’t think It matters just so both sides are the same when your done
Thanks for the heads up
@DIYJIM
3 жыл бұрын
No problem 👍 thanks for watching
Last week my Husky started self destructing as I was mowing. A major weld broke from the bracket holding the deck. When it was welded they missed the seam completely and the weld was also cold. Sure wish I had bought another MTD!! Husky sucks! This is also a replacement mower. The first one had the transaxle replaced three times!
@DIYJIM
Жыл бұрын
Holy smokes, Thanks for watching
Thanks! Mine was off too
@DIYJIM
10 ай бұрын
Welcome
Thank you
@DIYJIM
11 күн бұрын
You're welcome
@yobabybubba
11 күн бұрын
@@DIYJIM I actually adjusted it and everything worked out great. I even tested it... and then when I go to start it again, it won't start. 🤦 I called the place where I bought it. I troubled shooted a bunch of things. And if my neighbor can't help me, then I will have to let them come pick it up And fix it.
@DIYJIM
11 күн бұрын
@@yobabybubba sorry to hear this. Wish I could help you
@yobabybubba
11 күн бұрын
@@DIYJIM My neighbor checked it out with me. He's much better with mechanical stuff. We're hoping it's the gasoline solenoid. I ordered it yesterday. It will be here tomorrow.
@DIYJIM
10 күн бұрын
@@yobabybubba hope it works for you
Great video, thank you very much! In the video, I noticed that your deck height selector was at it's "max deck height" position (number 6), when you were showing us how to do the adjustments. My question is, "Is 3.5 inches in height for the rear of the deck at max height, listed by Husqvarna's factory service manual as the correct height for that setting? Thanks for any reply, and thanks again for the lesson. 👍
@DIYJIM
Жыл бұрын
This was my neighbors mower not 100% sure. I would have to check the manual. Sorry I couldn’t answer better. Thanks for watching
According to the manual, when adjusting the level of the Husqvarna deck. You measure from the ground to the blade. Though don't know if there's any difference compared to measuring from the ground to the bottom of the deck frame.
@DIYJIM
Жыл бұрын
Thanks for watching I think i said that in the video. Thanks for watching
👍👍
@DIYJIM
Жыл бұрын
Thanks for watching
Good job teaching us but what about the spacer nut in the front. Is the nut supposed to be rounded? Thanks again for the help
@DIYJIM
5 ай бұрын
I think I showed that in the video. It should not be rounded
Wait, What??? That thing isn’t green? Great video and needed as grass trimming will begin in a week or so up Heyah in Maine, Ayuh...
@DIYJIM
3 жыл бұрын
It’s my neighbors thought I could make a couple videos and help him out. Thanks for watching my friend
Thanks for the info. My husqvarna was not same height left and right side from factory. Why do they want front to be lower than the front?
@DIYJIM
3 жыл бұрын
Making the front lower will help so you do not double cut your grass that would give you brown tips. Thanks for watching
I have a YT 42XLS, I bought used, without a user manual. This helps! Thank You! BTW, the middle of the 3 (sharpened) blades is leaving a trail of partially uncut grass, and I have to go back and mow it twice. Any suggestions?
@DIYJIM
2 жыл бұрын
Sorry not sure maybe with three blades it gets leveled different. Sorry I can not help
@Bob-yl9pm
2 жыл бұрын
@@DIYJIM Ok, Thank You anyway! 🙂
Great video! Would it make a cutting difference if the entire mower deck was even all around? For instance, 3.5 in the front and 3.5 in the back.
@DIYJIM
2 жыл бұрын
Never tried it, I think it is better if the front is lower
@psychodad4634
2 жыл бұрын
@@DIYJIM Thank you for your quick response. I am going to make the adjustments. I am tired of my Husqvarna unevenly cutting my nice Bermuda lawn.
Thank you for the informative video. I am an Atheist, but will still give you a 'like' ~ Cheers!
@DIYJIM
9 ай бұрын
Thanks for watching
What did you have the mower height setting at. From your video it looks like it is set on the highest setting?
@DIYJIM
2 жыл бұрын
It does not matter what the height is set at when you make adjustments because there is only one adjustment from side to side then one in the front.
Did you have the deck in the full “UP” position when making your adjustments??
@DIYJIM
Жыл бұрын
It does not matter just make sure they match when your done.
I have the same mower and last year I hit a rock while mowing the ditch next to the road and bent a blade really badly. It also broke the spindle. So I just replaced the spindle and blades and the deck was uneven. It only had an adjustment on one side and I had to max it out to make it even. The belt was ruined by the broken spindle so I replaced it as well. Now the weird part…when on the highest setting the blade is now engaged and I can’t even turn the engagement lever to the position it is supposed to be in for blade engagement. I’m not sure why but I actually like it a little bit because I don’t have to disengage the blade to back up anymore which always annoyed me and the height is perfect for the way I like to cut my grass anyway. And when I hit a tall and thick spot I can just press the engagement lever towards the position for engagement and it prevents the belt from slipping and powers right on through it. I am going to take a look and see if I can figure out what is causing this I guess but I had to get the grass mowed before it got completely out of control and like I said I kind of like the way it worked. The only thing is that I can’t disengage the blades so it could be a little inconvenient at some point. If you have any ideas why this might be happening I would appreciate your input and thanks for reading this long comment. I appreciate your videos and I have found them helpful! 👍
@DIYJIM
Жыл бұрын
That was a long comment. Thank you very much for watching my video. Sorry I really could not guess why this is happening. Hope you get it figured out. Have a good summer.
@shk2564
Жыл бұрын
@@DIYJIM I appreciate the quick response and you have a great summer as well!
But DAMN those guns though
@DIYJIM
Жыл бұрын
Thanks
This would work if the deck was what actually cut the grass. If you want to do it much more efficiently and be precise with it, the right tool for the job is available for @ $10 online. 👊
@DIYJIM
6 ай бұрын
Thanks for watching
Changing the belt on a husty
@DIYJIM
3 жыл бұрын
sorry only have my neighbors mower and my John Deere