How to Layout out a Bowling Ball in 2023! | Storm VLS Layout System Fully Explained!
/ membership
Жүктеу.....
Пікірлер: 37
@bowlersvault Жыл бұрын
Food for thought… do not copy this exact layout. Also, if you use this same layout on a bowling ball with your PAP measurements, it might not look the same. This doesn’t change reaction however. It’s the same exact layout but with your own PAP. Our style, revs, where we like to play the lanes - they will all determine the layouts you need for your equipment. Higher rev players may need a higher Pin Buffer so that the reaction is not as strong. Low rev players may need a lower Pin Buffer so that the ball can respond quicker. These factors are very important. Watch my video a good 2-3 times, and understand the information I am giving you. Again, all questions are welcome!
@johnb.3570 Жыл бұрын
Very high quality and informative video!
@bowlersvault
Жыл бұрын
Glad it helped!
@anthonydorazio965010 ай бұрын
Nice directions sir. Thank you 😊
@bowlersvault
10 ай бұрын
Anytime Sir!
@anthonydorazio9650
10 ай бұрын
@fullsendbowling one more question the last number on the Dual Angle the lower the # more smooth or more sharper off the spot. Thanks 👍
@bowlersvault
10 ай бұрын
@@anthonydorazio9650 Hi Anthony! So for Dual Angle, the lower the number for the last angle = sharper/quicker response off the spot! This is the same for VLS too
@marcvaillancourtmv11 ай бұрын
I got a popsicle headache watching this. Informative tho
@bowlersvault
11 ай бұрын
It’s a lot of information which is understandable. If you understand what ball flare is and how it affects hook (ex. more flare = more hook), and that a pin buffer arc (the third arc of the layout) below 3 1/2 will create a smoother roll vs a pin buffer higher than 3 1/2 will create a sharper roll (more “backend”), then layouts become super easy
@mariocalimlim44357 ай бұрын
I thought the last line where your PAP should be the center of your grip? It doesn’t looks centered to me. 😢
@bowlersvault
7 ай бұрын
the last two lines you draw on the ball are the midline, then the center line. They are both perpendicular to one another. Where they both intersect is where the center of grip is
@dino_boy_4259 Жыл бұрын
Does this only work for three fingers or can it also work with two fingers? The final area where you put your finger holes is right around where mine are, just without the thumb hole.
@bowlersvault
Жыл бұрын
The VLS system is designed for traditional one-handed bowlers. However, it does not mean it cannot work for you. Experimentation is vital for getting better and finding out what we like as bowlers. In the next couple of videos, I will be posting a two-finger/two-handed layout video. Stay tuned and be sure to sub and hit the notification bell so you get notified when I upload it!
@CarlL1957
11 ай бұрын
Storm has a two finger layout system.
@bowlersvault
11 ай бұрын
@@CarlL1957 Correct. The 2LS
@leshopkins4511 ай бұрын
Can you do one for lefty’s?
@bowlersvault
11 ай бұрын
It would be the same process but you would make your arcs on the left side of the bowling ball. Think about watching the video if it was mirrored!
@JoeBrrFan6 ай бұрын
The DualAngle seems so much easier to me.. and is way faster to lay out. Is there something about the VLS that makes it a better layout??? Cuz I'm not seeing anything special.
@bowlersvault
6 ай бұрын
Not sure where the information is coming from about VLS being better than Dual Angle. They both do the same exact thing. Instead of degrees, you work with inches. Really is the only difference. If Dual Angle is easy for you, great dude. Every layout system that is widely used in the industry is easy for me. I still use Dual Angle for customers from time to time.
@Ghosty_484 Жыл бұрын
We need more videos tbh
@bowlersvault
Жыл бұрын
More videos about VLS/Pin Buffer System? Or just more bowling pro shop videos?
@bowlersvault
Жыл бұрын
?
@keithh.52179 ай бұрын
I'm new here and don't have a clue what all those terms mean or what they do.
@bowlersvault
9 ай бұрын
New to bowling! Nice! You will learn as time goes by. If you would like a breakdown of the VLS system, i recommend watching Storm’s 3 part pin buffer layout system video. It really helps! Glad to see you join the bowling community!
@benjaminchang138211 ай бұрын
can you learn from him guys ?
@bowlersvault
11 ай бұрын
great question
@882828jc
11 ай бұрын
As long as I don't have to make a living with that. Nothing is important.
@bowlersvault
11 ай бұрын
@@882828jc sometimes all you need is a ball and pins and that’s it!
@ron2823 Жыл бұрын
Technology has passed me by. I understood NOTHING,
@MrYuk-lm3xp
Жыл бұрын
You ain't the only one😂😂😂
@bowlersvault
Жыл бұрын
I’m sure you have no issue following the steps, more or less it’s the numbers that I assume are what is tricky for you. Think of it this way for the VLS layout system: First arc is Pin to PAP. We know that 3 3/8 gives the strongest flare. If you want less flare, use a larger number like 4. If you want it to flare early and smooth out, use a shorter number such as 2 1/2. The same goes for the next arc PSA to PAP. This number really only matters for Asymmetrical equipment. This number would also matter on symmetrical equipment if weight/balance holes existed but we’re not in 2010 anymore. The numbers still apply like the Pin to PAP arc. There is no difference. If you want it to flare less, use a higher number than 3 3/8. Flare earlier and smooth, use a lower number. The last arc the Pin Buffer will determine reaction down lane. I tend to use 3 as my middle point. Want a sharper reaction? Use a smaller number such as 2. Want a smoother transition of the bowling ball? Use something like 3 3/4 or 4. That is all there is to it.
@882828jc
11 ай бұрын
That all right, you can save a tons of money. If you are not curious, they made no money. Just think, no matter what they did, you still had to generate those motion or force with your hand, they can.t be automatically .to get a strike.😂😂😂
@bowlersvault
11 ай бұрын
@@882828jc let’s make a remote controlled bowling ball! Same as they did with a golf ball lol
@erikknudson307711 ай бұрын
dual angle or NUTTIN
@bowlersvault
11 ай бұрын
The VLS layout system not only is a faster layout system, but will also come out to the same Pin-to-Pap, Drilling Angle, and Val coordinates as Dual Angle. There is a converter that exists. To be frankly honest, they both do the exact same thing and the outcome is the exact same as long as you convert the angles to arcs or arcs to angles. Dual Angle is a great system, but VLS has less variables. Less time=more work flow
@JoeBrrFan
6 ай бұрын
@@bowlersvault Umm This is not faster.. not even close. I can lay out a dual angle in about a minute.
@bowlersvault
6 ай бұрын
@@JoeBrrFan I can do VLS in less than 20 seconds. Literally just 3 arcs. It’s not really a competition bro. Both are great layout systems that mean the same exact thing at the end of the day. I find the flow faster with VLS. If you don’t, then you don’t.
Пікірлер: 37
Food for thought… do not copy this exact layout. Also, if you use this same layout on a bowling ball with your PAP measurements, it might not look the same. This doesn’t change reaction however. It’s the same exact layout but with your own PAP. Our style, revs, where we like to play the lanes - they will all determine the layouts you need for your equipment. Higher rev players may need a higher Pin Buffer so that the reaction is not as strong. Low rev players may need a lower Pin Buffer so that the ball can respond quicker. These factors are very important. Watch my video a good 2-3 times, and understand the information I am giving you. Again, all questions are welcome!
Very high quality and informative video!
@bowlersvault
Жыл бұрын
Glad it helped!
Nice directions sir. Thank you 😊
@bowlersvault
10 ай бұрын
Anytime Sir!
@anthonydorazio9650
10 ай бұрын
@fullsendbowling one more question the last number on the Dual Angle the lower the # more smooth or more sharper off the spot. Thanks 👍
@bowlersvault
10 ай бұрын
@@anthonydorazio9650 Hi Anthony! So for Dual Angle, the lower the number for the last angle = sharper/quicker response off the spot! This is the same for VLS too
I got a popsicle headache watching this. Informative tho
@bowlersvault
11 ай бұрын
It’s a lot of information which is understandable. If you understand what ball flare is and how it affects hook (ex. more flare = more hook), and that a pin buffer arc (the third arc of the layout) below 3 1/2 will create a smoother roll vs a pin buffer higher than 3 1/2 will create a sharper roll (more “backend”), then layouts become super easy
I thought the last line where your PAP should be the center of your grip? It doesn’t looks centered to me. 😢
@bowlersvault
7 ай бұрын
the last two lines you draw on the ball are the midline, then the center line. They are both perpendicular to one another. Where they both intersect is where the center of grip is
Does this only work for three fingers or can it also work with two fingers? The final area where you put your finger holes is right around where mine are, just without the thumb hole.
@bowlersvault
Жыл бұрын
The VLS system is designed for traditional one-handed bowlers. However, it does not mean it cannot work for you. Experimentation is vital for getting better and finding out what we like as bowlers. In the next couple of videos, I will be posting a two-finger/two-handed layout video. Stay tuned and be sure to sub and hit the notification bell so you get notified when I upload it!
@CarlL1957
11 ай бұрын
Storm has a two finger layout system.
@bowlersvault
11 ай бұрын
@@CarlL1957 Correct. The 2LS
Can you do one for lefty’s?
@bowlersvault
11 ай бұрын
It would be the same process but you would make your arcs on the left side of the bowling ball. Think about watching the video if it was mirrored!
The DualAngle seems so much easier to me.. and is way faster to lay out. Is there something about the VLS that makes it a better layout??? Cuz I'm not seeing anything special.
@bowlersvault
6 ай бұрын
Not sure where the information is coming from about VLS being better than Dual Angle. They both do the same exact thing. Instead of degrees, you work with inches. Really is the only difference. If Dual Angle is easy for you, great dude. Every layout system that is widely used in the industry is easy for me. I still use Dual Angle for customers from time to time.
We need more videos tbh
@bowlersvault
Жыл бұрын
More videos about VLS/Pin Buffer System? Or just more bowling pro shop videos?
@bowlersvault
Жыл бұрын
?
I'm new here and don't have a clue what all those terms mean or what they do.
@bowlersvault
9 ай бұрын
New to bowling! Nice! You will learn as time goes by. If you would like a breakdown of the VLS system, i recommend watching Storm’s 3 part pin buffer layout system video. It really helps! Glad to see you join the bowling community!
can you learn from him guys ?
@bowlersvault
11 ай бұрын
great question
@882828jc
11 ай бұрын
As long as I don't have to make a living with that. Nothing is important.
@bowlersvault
11 ай бұрын
@@882828jc sometimes all you need is a ball and pins and that’s it!
Technology has passed me by. I understood NOTHING,
@MrYuk-lm3xp
Жыл бұрын
You ain't the only one😂😂😂
@bowlersvault
Жыл бұрын
I’m sure you have no issue following the steps, more or less it’s the numbers that I assume are what is tricky for you. Think of it this way for the VLS layout system: First arc is Pin to PAP. We know that 3 3/8 gives the strongest flare. If you want less flare, use a larger number like 4. If you want it to flare early and smooth out, use a shorter number such as 2 1/2. The same goes for the next arc PSA to PAP. This number really only matters for Asymmetrical equipment. This number would also matter on symmetrical equipment if weight/balance holes existed but we’re not in 2010 anymore. The numbers still apply like the Pin to PAP arc. There is no difference. If you want it to flare less, use a higher number than 3 3/8. Flare earlier and smooth, use a lower number. The last arc the Pin Buffer will determine reaction down lane. I tend to use 3 as my middle point. Want a sharper reaction? Use a smaller number such as 2. Want a smoother transition of the bowling ball? Use something like 3 3/4 or 4. That is all there is to it.
@882828jc
11 ай бұрын
That all right, you can save a tons of money. If you are not curious, they made no money. Just think, no matter what they did, you still had to generate those motion or force with your hand, they can.t be automatically .to get a strike.😂😂😂
@bowlersvault
11 ай бұрын
@@882828jc let’s make a remote controlled bowling ball! Same as they did with a golf ball lol
dual angle or NUTTIN
@bowlersvault
11 ай бұрын
The VLS layout system not only is a faster layout system, but will also come out to the same Pin-to-Pap, Drilling Angle, and Val coordinates as Dual Angle. There is a converter that exists. To be frankly honest, they both do the exact same thing and the outcome is the exact same as long as you convert the angles to arcs or arcs to angles. Dual Angle is a great system, but VLS has less variables. Less time=more work flow
@JoeBrrFan
6 ай бұрын
@@bowlersvault Umm This is not faster.. not even close. I can lay out a dual angle in about a minute.
@bowlersvault
6 ай бұрын
@@JoeBrrFan I can do VLS in less than 20 seconds. Literally just 3 arcs. It’s not really a competition bro. Both are great layout systems that mean the same exact thing at the end of the day. I find the flow faster with VLS. If you don’t, then you don’t.